[Xen-devel] [SR-IOV driver example 2/3 resend] PF driver: integrate with SR-IOV core

[Yu Zhao <yu.zhao@xxxxxxxxx>]

This patch integrates the IGB driver with the SR-IOV core. It shows how
the SR-IOV API is used to support the capability. Obviously people does
not need to put much effort to integrate the PF driver with SR-IOV core.
All SR-IOV standard stuff are handled by SR-IOV core and PF driver only
concerns the device specific resource allocation and deallocation once it
gets the necessary information (i.e. number of Virtual Functions) from
the callback function.

From: Intel Corporation, LAN Access Division <e1000-devel@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Yu Zhao <yu.zhao@xxxxxxxxx>

---
 drivers/net/igb/igb_main.c |   46 ++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index f0361ef..78bda11 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -138,6 +138,7 @@ void igb_set_mc_list_pools(struct igb_adapter *, struct 
e1000_hw *, int, u16);
 static int igb_vmm_control(struct igb_adapter *, bool);
 static int igb_set_vf_mac(struct net_device *, int, u8*);
 static void igb_mbox_handler(struct igb_adapter *);
+static int igb_virtual(struct pci_dev *, int);
 
 static int igb_suspend(struct pci_dev *, pm_message_t);
 #ifdef CONFIG_PM
@@ -182,6 +183,7 @@ static struct pci_driver igb_driver = {
 #endif
        .shutdown = igb_shutdown,
        .err_handler = &igb_err_handler,
+       .virtual = igb_virtual
 };
 
 static int global_quad_port_a; /* global quad port a indication */
@@ -5066,4 +5068,48 @@ void igb_set_mc_list_pools(struct igb_adapter *adapter,
        wr32(E1000_VMOLR(pool), reg_data);
 }
 
+static int
+igb_virtual(struct pci_dev *pdev, int nr_virtfn)
+{
+       int i;
+       struct net_device *netdev = pci_get_drvdata(pdev);
+       struct igb_adapter *adapter = netdev_priv(netdev);
+       /* the VFs' MAC addresses are hard-coded */
+       unsigned char my_mac_addr[6] = {0x00, 0xDE, 0xAD, 0xBE, 0xEF, 0xFF};
+
+       /*
+        * the 82576 NIC supports 1-PF NIC + 7-VF NICs mode and 8-VF NICs
+        * mode. In the 8-VF NICs mode, the PF can't tx/rx packets -- it
+        * only behaves as 'VF supervisor'. For now we use the 1-PF NIC +
+        * 7-VF NICs mode to preserve PF's tx/rx capability for the debug
+        * purpose.
+        */
+       if (nr_virtfn > (MAX_NUM_VFS - 1))
+               return -EINVAL;
+
+       if (nr_virtfn) {
+               dev_info(&pdev->dev, "SR-IOV is enabled\n");
+               /*
+                * Currently VFs resources are pre-allocated, so just set
+                * the MAC addresses of each VF here.
+                */
+               for (i = 0; i < nr_virtfn; i++) {
+                       my_mac_addr[5] = (unsigned char)i;
+                       igb_set_vf_mac(netdev, i, my_mac_addr);
+                       igb_set_vf_vmolr(adapter, i);
+               }
+       } else {
+               /*
+                * Since we statically allocate tx/rx queues for the PF
+                * and the VFs, so we don't need to free any VF related
+                * resources here.
+                */
+               dev_info(&pdev->dev, "SR-IOV is disabled\n");
+       }
+
+       adapter->vfs_allocated_count = nr_virtfn;
+
+       return 0;
+}
+
 /* igb_main.c */
-- 
1.5.6.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel