|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] pv_ops dom0 testing
On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@xxxxxxxxx> wrote: > > >> I had the system setup to output to serial and vga console >> (console=vga,com1) but it seems that the vga console only displays Xen >> debug messages, > > Here is my grub debug setup for reference > > title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel 2.6.28-rc6-tip > root (hd0,0) > kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all > com1=115200,8n1 console=com1 mem=3G > module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro console=hvc0 > earlyprintk=xen xencons=ttyS0,115200 nousb > module /boot/initrd.img-2.6.28-rc6-tip > > >> >> I hooked up a null modem cable and I've now captured >> the full xen and linux dmesg, it appears that the onboard intel ahci >> sata is not working so the kernel is unable to run init: >> >> __ __ _____ _____ ___ >> >> \ \/ /___ _ __ |___ / |___ / / _ \ >> >> \ // _ \ '_ \ |_ \ |_ \| | | | >> >> / \ __/ | | | ___) | ___) | |_| | >> >> /_/\_\___|_| |_| |____(_)____(_)___/ >> >> >> >> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2 >> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008 >> >> (XEN) Latest ChangeSet: unavailable >> >> (XEN) Command line: com1=115200,8n1 console=vga,com1 >> >> (XEN) Video information: >> >> (XEN) VGA is text mode 80x25, font 8x16 >> >> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds >> >> (XEN) Disc information: >> >> (XEN) Found 1 MBR signatures >> >> (XEN) Found 1 EDD information structures >> >> (XEN) Xen-e820 RAM map: >> >> (XEN) 0000000000000000 - 000000000009ec00 (usable) >> >> (XEN) 00000000000f0000 - 0000000000100000 (reserved) >> >> (XEN) 0000000000100000 - 00000000cfdff800 (usable) >> >> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS) >> >> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data) >> >> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved) >> >> (XEN) 00000000e0000000 - 00000000f0000000 (reserved) >> >> (XEN) 00000000fec00000 - 00000000fed00400 (reserved) >> >> (XEN) 00000000fed20000 - 00000000feda0000 (reserved) >> >> (XEN) 00000000fee00000 - 00000000fef00000 (reserved) >> >> (XEN) 00000000ffb00000 - 0000000100000000 (reserved) >> >> (XEN) 0000000100000000 - 0000000128000000 (usable) >> >> (XEN) System RAM: 3965MB (4060788kB) >> >> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL ) >> >> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL >> 20050624) >> >> (XEN) ACPI: FACS CFDFF800, 0040 >> >> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL >> 20050624) >> >> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL >> 61) >> >> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL >> 20050624) >> >> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL >> 20050624) >> >> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL >> 20050624) >> >> (XEN) Xen heap: 14MB (14632kB) >> >> (XEN) Domain heap initialised >> >> (XEN) Processor #0 6:15 APIC version 20 >> >> (XEN) Processor #1 6:15 APIC version 20 >> >> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 >> >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs >> >> (XEN) Using scheduler: SMP Credit Scheduler (credit) >> >> (XEN) Detected 2394.042 MHz processor. >> >> (XEN) HVM: VMX enabled >> >> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 >> >> (XEN) Booting processor 1/1 eip 8c000 >> >> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 >> >> (XEN) Total of 2 processors activated. >> >> (XEN) ENABLING IO-APIC IRQs >> >> (XEN) -> Using new ACK method >> >> (XEN) checking TSC synchronization across 2 CPUs: passed. >> >> (XEN) Platform timer is 14.318MHz HPET >> >> (XEN) Brought up 2 CPUs >> >> (XEN) I/O virtualisation disabled >> >> (XEN) *** LOADING DOMAIN 0 *** >> >> (XEN) Xen kernel: 64-bit, lsb, compat32 >> >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68 >> >> (XEN) PHYSICAL MEMORY ARRANGEMENT: >> >> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126 pages >> to be allocated) >> >> (XEN) VIRTUAL MEMORY ARRANGEMENT: >> >> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68 >> >> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000 >> >> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570 >> >> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4 >> >> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000 >> >> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000 >> >> (XEN) TOTAL: ffffffff80000000->ffffffff81000000 >> >> (XEN) ENTRY ADDRESS: ffffffff8064f200 >> >> (XEN) Dom0 has maximum 2 VCPUs >> >> (XEN) Scrubbing Free RAM: .done. >> >> (XEN) Xen trace buffers: disabled >> >> (XEN) Std. Loglevel: Errors and warnings >> >> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) >> >> (XEN) Xen is relinquishing VGA console. >> >> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch >> input to Xen) >> >> (XEN) Freed 108kB init memory. >> >> mapping kernel into physical memory >> >> Xen: setup ISA identity maps >> >> about to get started... >> >> PAT disabled on Xen >> >> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2 >> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008 >> >> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen >> >> KERNEL supported cpus: >> >> Intel GenuineIntel >> >> AMD AuthenticAMD >> >> Centaur CentaurHauls >> >> BIOS-provided physical RAM map: >> >> Xen: 0000000000000000 - 00000000000a0000 (usable) >> >> Xen: 00000000000a0000 - 0000000000100000 (reserved) >> >> Xen: 0000000000100000 - 0000000000778000 (usable) >> >> Xen: 0000000000778000 - 0000000000ed1000 (reserved) >> >> Xen: 0000000000ed1000 - 00000000eaeae000 (usable) >> >> console [xenboot0] enabled >> >> DMI 2.5 present. >> >> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff >> >> init_memory_mapping: 0000000000000000-00000000eaeae000 >> >> last_map_addr: eaeae000 end: eaeae000 >> >> ACPI: RSDP 000FEC00, 0024 (r2 DELL ) >> >> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61) >> >> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61) >> >> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624) >> >> ACPI: FACS CFDFF800, 0040 >> >> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624) >> >> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61) >> >> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61) >> >> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61) >> >> ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61) >> >> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61) >> >> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61) >> >> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61) >> >> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61) >> >> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624) >> >> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624) >> >> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624) >> >> ACPI: DMI detected: Dell OptiPlex 755 >> >> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000] >> >> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - >> 0000001000] >> >> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - >> 0000008000] >> >> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 - >> 0000edc000] >> >> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 - >> 0000777e68] >> >> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 - >> 000162b000] >> >> found SMP MP-table at [ffff8800000fe710] 000fe710 >> >> Zone PFN ranges: >> >> DMA 0x00000000 -> 0x00001000 >> >> DMA32 0x00001000 -> 0x00100000 >> >> Normal 0x00100000 -> 0x00100000 >> >> Movable zone start PFN for each node >> >> early_node_map[3] active PFN ranges >> >> 0: 0x00000000 -> 0x000000a0 >> >> 0: 0x00000100 -> 0x00000778 >> >> 0: 0x00000ed1 -> 0x000eaeae >> >> ACPI: PM-Timer IO Port: 0x808 >> >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >> >> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) >> >> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) >> >> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) >> >> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) >> >> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) >> >> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) >> >> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) >> >> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) >> >> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 >> >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> >> ACPI: HPET id: 0x8086a301 base: 0xfed00000 >> >> Using ACPI (MADT) for SMP configuration information >> >> SMP: Allowing 2 CPUs, 0 hotplug CPUs >> >> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1 >> >> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900 >> >> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! >> >> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1 >> >> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900 >> >> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! >> >> Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000) >> >> PERCPU: Allocating 57344 bytes of per cpu data >> >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >> 945674 >> >> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen >> >> Initializing CPU#0 >> >> xen: allocated irq 9 for acpi 9 >> >> PID hash table entries: 4096 (order: 12, 32768 bytes) >> >> Detected 2394.042 MHz processor. >> >> Console: colour dummy device 80x25 >> >> console handover: boot [xenboot0] -> real [hvc0] >> >> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >> >> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >> >> Checking aperture... >> >> No AGP bridge found >> >> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >> >> Placing software IO TLB between 0x51ca000 - 0x91ca000 >> >> Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent, >> 139388k reserved, 1546k data, 420k init) >> >> installing Xen timer for CPU 0 >> >> Calibrating delay loop (skipped), value calculated using timer >> frequency.. 4788.08 BogoMIPS (lpj=9576168) >> >> Mount-cache hash table entries: 256 >> >> CPU: L1 I cache: 32K, L1 D cache: 32K >> >> CPU: L2 cache: 4096K >> >> CPU: Physical Processor ID: 0 >> >> CPU: Processor Core ID: 0 >> >> SMP alternatives: switching to UP code >> >> ACPI: Core revision 20080926 >> >> cpu 0 spinlock event irq 17 >> >> installing Xen timer for CPU 1 >> >> cpu 1 spinlock event irq 23 >> >> SMP alternatives: switching to SMP code >> >> Initializing CPU#1 >> >> CPU: L1 I cache: 32K, L1 D cache: 32K >> >> CPU: L2 cache: 4096K >> >> CPU: Physical Processor ID: 0 >> >> CPU: Processor Core ID: 0 >> >> Brought up 2 CPUs >> >> net_namespace: 552 bytes >> >> Booting paravirtualized kernel on Xen >> >> Xen version: 3.3.0 (preserve-AD) (dom0) >> >> Grant table initialized >> >> NET: Registered protocol family 16 >> >> xenbus_probe_init ok >> >> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >> >> ACPI: bus type pci registered >> >> PCI: Using configuration type 1 for base access >> >> ACPI: Interpreter enabled >> >> ACPI: (supports S0 S5) >> >> ACPI: Using IOAPIC for interrupt routing >> >> ACPI: ACPI Dock Station Driver: 1 docks/bays found >> >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> >> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold >> >> pci 0000:00:01.0: PME# disabled >> >> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold >> >> pci 0000:00:03.0: PME# disabled >> >> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >> >> pci 0000:00:19.0: PME# disabled >> >> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold >> >> pci 0000:00:1a.7: PME# disabled >> >> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >> >> pci 0000:00:1b.0: PME# disabled >> >> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >> >> pci 0000:00:1c.0: PME# disabled >> >> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >> >> pci 0000:00:1d.7: PME# disabled >> >> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO >> >> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO >> >> pci 0000:00:1f.2: PME# supported from D3hot >> >> pci 0000:00:1f.2: PME# disabled >> >> pci 0000:00:1e.0: transparent bridge >> >> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) >> >> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) >> >> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) >> >> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) >> >> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, >> disabled. >> >> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) >> >> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) >> >> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) >> >> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, >> should be 87 [20080926] >> >> xen_balloon: Initialising balloon driver. >> >> SCSI subsystem initialized >> >> PCI: Using ACPI for IRQ routing >> >> pci 0000:00:01.0: BAR 9: can't allocate resource >> >> pci 0000:01:00.0: BAR 0: can't allocate resource >> >> Xen: Initializing Xen DMA ops >> >> Xen: Enabling DMA fallback to swiotlb >> >> PCI-GART: No AMD GART found. >> >> pnp: PnP ACPI init >> >> ACPI: bus type pnp registered >> >> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 >> (0x800-0x87f), disabling >> >> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 >> (0x800-0x87f), disabling >> >> system 00:01: ioport range 0xc00-0xc7f has been reserved >> >> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 >> triggering 1 polarity 0 >> >> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 >> triggering 1 polarity 0 >> >> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7 >> triggering 1 polarity 0 >> >> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 >> triggering 1 polarity 0 >> >> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 >> >> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1 >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! >> >> pnp: PnP ACPI: found 9 devices >> >> ACPI: ACPI bus type pnp unregistered >> >> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 >> >> pci 0000:00:01.0: IO window: 0xd000-0xdfff >> >> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff >> >> pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff >> >> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 >> >> pci 0000:00:1c.0: IO window: disabled >> >> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff >> >> pci 0000:00:1c.0: PREFETCH window: disabled >> >> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 >> >> pci 0000:00:1e.0: IO window: disabled >> >> pci 0000:00:1e.0: MEM window: disabled >> >> pci 0000:00:1e.0: PREFETCH window: disabled >> >> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16 >> triggering 0 polarity 1 >> >> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29 >> >> xen: PCI device 0000:00:01.0 pin 1 -> irq 29 >> >> xen_allocate_pirq: returning irq 29 for gsi 16 >> >> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16 >> triggering 0 polarity 1 >> >> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29 >> >> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29 >> >> bus: 00 index 0 io port: [0x00-0xffff] >> >> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] >> >> bus: 01 index 0 io port: [0xd000-0xdfff] >> >> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff] >> >> bus: 01 index 2 mmio: [0x100000000-0x10fffffff] >> >> bus: 01 index 3 mmio: [0x0-0x0] >> >> bus: 02 index 0 mmio: [0x0-0x0] >> >> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff] >> >> bus: 02 index 2 mmio: [0x0-0x0] >> >> bus: 02 index 3 mmio: [0x0-0x0] >> >> bus: 03 index 0 mmio: [0x0-0x0] >> >> bus: 03 index 1 mmio: [0x0-0x0] >> >> bus: 03 index 2 mmio: [0x0-0x0] >> >> bus: 03 index 3 io port: [0x00-0xffff] >> >> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff] >> >> NET: Registered protocol family 2 >> >> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) >> >> TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >> >> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> >> TCP: Hash tables configured (established 262144 bind 65536) >> >> TCP reno registered >> >> NET: Registered protocol family 1 >> >> Simple Boot Flag at 0x7a set to 0x1 >> >> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). >> >> msgmni has been set to 7517 >> >> io scheduler noop registered >> >> io scheduler cfq registered (default) >> >> pcieport-driver 0000:00:01.0: found MSI capability >> >> pcieport-driver 0000:00:1c.0: found MSI capability >> >> input: Power Button (FF) as /class/input/input0 >> >> ACPI: Power Button (FF) [PWRF] >> >> input: Power Button (CM) as /class/input/input1 >> >> ACPI: Power Button (CM) [VBTN] >> >> xenbus_probe_backend_init bus registered ok >> >> xenbus_probe_frontend_init bus registered ok >> >> Event-channel device installed. >> >> ***blkif_init >> >> Real Time Clock Driver v1.12ac >> >> Linux agpgart interface v0.103 >> >> floppy0: Unable to grab IRQ6 for the floppy driver >> >> brd: module loaded >> >> loop: module loaded >> >> tun: Universal TUN/TAP device driver, 1.6 >> >> tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> >> >> console [netcon0] enabled >> >> netconsole: network logging started >> >> Driver 'sd' needs updating - please use bus_type methods >> >> Driver 'sr' needs updating - please use bus_type methods >> >> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18 >> triggering 0 polarity 1 >> >> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31 >> >> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31 >> >> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA >> mode >> >> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems >> >> (XEN) unexpected IRQ trap at vector 59 >> >> (XEN) unexpected IRQ trap at vector 59 >> >> scsi0 : ahci >> >> scsi1 : ahci >> >> scsi2 : ahci >> >> scsi3 : ahci >> >> scsi4 : ahci >> >> scsi5 : ahci >> >> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277 >> >> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277 >> >> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277 >> >> ata4: DUMMY >> >> ata5: DUMMY >> >> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277 >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata1.00: qc timeout (cmd 0xec) >> >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata1.00: qc timeout (cmd 0xec) >> >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata1.00: qc timeout (cmd 0xec) >> >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata2.00: qc timeout (cmd 0xa1) >> >> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata2.00: qc timeout (cmd 0xa1) >> >> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> (XEN) unexpected IRQ trap at vector 59 >> >> ata2.00: qc timeout (cmd 0xa1) >> >> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) >> >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> >> ata3: SATA link down (SStatus 4 SControl 300) >> >> ata6: SATA link down (SStatus 4 SControl 300) >> >> PNP: No PS/2 controller found. Probing ports directly. >> >> i8042: probe of i8042 failed with error -38 >> >> mice: PS/2 mouse device common for all mice >> >> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: >> dm-devel@xxxxxxxxxx >> >> cpuidle: using governor ladder >> >> TCP cubic registered >> >> NET: Registered protocol family 17 >> >> RPC: Registered udp transport module. >> >> RPC: Registered tcp transport module. >> >> IO APIC resources could be not be allocated. >> >> Root-NFS: No NFS server available, giving up. >> >> VFS: Unable to mount root fs via NFS, trying floppy. >> >> VFS: Insert root floppy and press ENTER >> >> Andy > > Looks like it is not detecting the drive correctly. > > What is your specific controller? The system is a Dell Optiplex 755 with Intel onboard sata, I'm having trouble finding the controller model and lspci only shows that it is AHCI: 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev 02) It is my Xen test server and has been running gentoo linux with both vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I wanted to start my pv_ops dom0 testing with a machine that I know can run Xen successfully. The HD is a Toshiba 2.5" drive as that is all I had to hand when I installed Gentoo Linux onto this machine, do you think its worth swapping that for a 3.5"? I've got a raptor lying around somwhere... Andy > > Cheers, > Todd > > -- > Todd Deshane > http://todddeshane.net > http://runningxen.com > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |