Re: [Xen-devel] Re: pv_ops dom0 USB fixed

["Andrew Lyon" <andrew.lyon@xxxxxxxxx>]

On Sat, Dec 13, 2008 at 7:02 PM, Todd Deshane <deshantm@xxxxxxxxx> wrote:
>> Yes, in ahci mode the cdrom  is detected but the disks are not, in
>> legacy mode neither is detected.
>
> OK. I am now able to start testing on the VT-d 755 box as well.
>
> I am just first going to give 4 logs.
>
> 1. static-based disk naming mem=3G (gets to initramfs prompt, probably
> similar to Andrew's).
> 2. static-based disk naming no mem=3G option (crashes with panic)
> 3. udev-based disk naming mem=3G (gets to initramfs prompt, probably
> similar to Andrew's)
> 4. udev-based disk naming no mem=3G option (crashes with panic)
>
> These are before the last set of patches, but no major fixes were add
> since. I'll update to the
> latest patches and re-test to stay in sync though.
>
> Let me know if there are any other things that I can help test with.
>
> Also, Andrew: which BIOS revision are you at?
> Have you tried looking for a new one?

My Optiplex 755 has the latest bios (A11) already, I don't think its a
hardware or bios problem because my testing has shown that on the bare
metal the same kernel boots successfully with the sata in legacy or
ahci mode both the cdrom and hd are detected, but booted under Xen the
hd is not detected in either mode.

On friday I changed the grub.conf to enable serial console as I will
not be at the office until tuesday but unfortunately I am not getting
any grub serial menu so the machine is stuck in a  reboot loop for the
next 3 days, next week I plan to put a root filesystem on a usb memory
stick to see if I can boot a OS that way and do more testing while the
hd issue is sorted out.

andy

>
> Cheers,
> Todd
>
> --
> Todd Deshane
> http://todddeshane.net
> http://runningxen.com
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel