[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] AMD P-States not recognized for Xen 3.3 and 3.4



Xen doesn't seem to fully recognize P-States in my AMD 4050e / Gigabyte M56S-S3
setting.

What works is a Xen 3.2-1 Debian with waldi 2.6.18-3.1-2 kernel in a way, that 
when specifying cpufreq=dom0-kernel and using cpufreq-set, I can change CPU
frequency (minor problem here: it will report backwards running clocks as 
mentioned
elsewere here: Timer ISR/0: Time went backwards).

But using cpufreq=xen will not report any P-states at all. Tried with different
3.3 versions up to 3.3.1 and 3.4 unstable. With cpuidle and without, also did
an update to BIOS F4 (latest version). Used xenpm from 3.3 and 3.4 to check.

I attached two dmesg / xm dmesg outputs, V1 will show with cpuidle on F4e BIOS,
V2 will show without cpuidle on F4 BIOS. Both used latest Xen 3.4-unstable and
waldi 2.6.18-3.3-1 kernel.

Any ideas how to proceed?


Attachment: dmesg1.txt
Description: Text document

Attachment: dmesg2.txt
Description: Text document

Attachment: xmdemesg2.txt
Description: Text document

Attachment: xmdmesg1.txt
Description: Text document

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.