My board is ASUS P5K Premium/WIFI.
Second Ethernet Adapter Realtek 8110SC (eth1) is attached to ADSL Modem (emulating local DHCP server for intranet ) and is working as xen bridge.
# ifconfig
# brctl show
looks fine, just like under Xen 3.3.1 with xen-ified kernel
Interface "eth1" fails to work with LAN, but obtains IP address for Dom0 via DHCP request to ADSL Modem. I am able do DHCPRELEASE and DHCPREQUEST via "eth1" whenever i want.
But, i cannot ping IP of ADSL modem from Dom0 , which clearly shows up in DHCPOFFER & DHCPACK responses.
F10 DomU obtained IP via this bridge also with no problems and communicates via ssh with Dom0.
>Does it fail to probe, or does it probe but
>not work?
Sorry,what exactly means "probe" eth1 ?
--- On Fri, 2/6/09, Jeremy Fitzhardinge <jeremy@xxxxxxxx> wrote:
From: Jeremy Fitzhardinge <jeremy@xxxxxxxx>
Subject: Re: [Xen-devel] Booting up the most recent 2.6.29-rc3 (pv_ops Dom0 support) under Xen Unstable on Intel SATA (AHCI) box
To: bderzhavets@xxxxxxxxx
Cc: "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Date: Friday, February 6, 2009, 1:54 AM
Boris Derzhavets wrote:
> Build 2.6.29-rc3 with the most recent change set and load under Xen
Unstable
> Logged into Dom0.
> Was able to load F10 PV DomU via prepared image.
> DomU obtained IP (192.168.1.38) via DHCP .
> Opened ssh connection to Dom0 192.168.1.34 (Ubuntu 8.10 Server)
>
> LAN is still unavailable for both DomU & Dom0.
>
So you're saying that you got internal
host<->guest networking going,
but external networking fails.
*****
YES
*****
What's your ethernet hardware? Does it fail to probe, or does it probe but
not work?
J
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
