[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Xen-devel] Install OpenSuse 11.1 PV DomU via VFB at Xen Unstable Dom0 (2.6.29-rc3)
- To: xen-devel@xxxxxxxxxxxxxxxxxxx
- From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
- Date: Wed, 11 Feb 2009 07:14:47 -0800 (PST)
- Delivery-date: Wed, 11 Feb 2009 07:15:20 -0800
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:X-Mailer:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=QhpFzPLnGkG3NoIq3SEP0SskegKwTtMi1mGGhEx3TterMPLB1vatmZ0+5a7G2AOecrJVZHBB3rBs/b08khw+GrFapndsq7JPozQnUtbyqF9K9KI78PlSqHlFnMqKQYxB/0Jf1EKOA90oCB+ApBVP9HSiR5vswuVeWnt6Nt+HWmk=;
- List-id: Xen developer discussion <xen-devel.lists.xensource.com>
OpenSuse 11.1 PV DomU has been also successfully tested ( utilizing VFB for installation and runtime profile) at Xen Unstable Dom0 (2.6.29-rc3). Extracting phase for for Suse's images is noticeably slow versus same install running at Xen 3.3.1 CentOS 5.2 Dom0 ( same hardware just multibooting several Xen Dom0)
--- On Tue, 2/10/09, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
From: Boris Derzhavets <bderzhavets@xxxxxxxxx> Subject: Re: [Xen-devel] pv_ops with xen-3.3 To: xen-devel@xxxxxxxxxxxxxxxxxxx, jonr@xxxxxxxxxx Date: Tuesday, February 10, 2009, 1:18 PM
I was able successfully installed and ran Ubuntu Intrepid Server PV DomU and F10 PV DomU (both 64-bit) at mentioned Xen Unstable Dom0s. One network issue came up on two boxes have been tested:- 1. C2D E8400,8 GB RAM , ASUS P5K Premium/WIFI, 2x250 GB SATA drives 2. C2D E6600,4 GB RAM, ASUS P5B Deluxe, 2x160 GB SATA drives. Per "dmesg" report:- South bridges ICH8R ,ICH9R (AHCI Bios Setup for both) have been detected by the most recent version of 2.6.29-rc3 with no problems as well as SATA drives parameters. NCQ depth set to (31/32) . However , only Matvell Yukon 8056 was able to function as xen bridge supporting LAN&WAN communications for Dom0. RTL 8110SC (first board) and RTL 8169 (plugged into second
board) failed to function as required
--- On Tue, 2/10/09, Boris
Derzhavets <bderzhavets@xxxxxxxxx> wrote:
From: Boris Derzhavets <bderzhavets@xxxxxxxxx> Subject: Re: [Xen-devel] pv_ops with xen-3.3 To: xen-devel@xxxxxxxxxxxxxxxxxxx, jonr@xxxxxxxxxx Date: Tuesday, February 10, 2009, 12:52 PM
The way it worked for me on Ubuntu Intrepid Server (x86_64)
First installed the most recent xen unstable:-
# cd /usr/src
# hg clone http://xenbits.xensource.com/xen-unstable.hg
# cd xen-unstable.hg
# make xen
# make install-xen
# make tools
# make install-tools
Compiled kernel supporting PV_OPS in Dom0 & INTEL AHCI (ICH(X)R)
# hg clone http://www.kernel.org/hg/linux-2.6
# cd linux-2.6/.hg
# hg clone http://xenbits.xensource.com/paravirt_ops/patches.hg patches
# cd ..
# ln -s .hg/patches . # for convenience
# hg update `cat patches/KERNEL_VERSION`
# hg qpush -a # make menuconfig # make # make modules_install install
# depmod 2.6.29-rc3-tip
# mkinitramfs -o /boot/initrd-2.6.29-rc3-tip.img 2.6.29-rc3-tip
Created grub entry :-
title Xen 3.4 / Ubuntu 8.10, kernel 2.6.29-tip
kernel /boot/xen-3.4.gz dom0_mem=1024M
module /boot/vmlinuz-2.6.29-rc3-tip root=/dev/sdb1 ro console=tty0 pci=nomsi
module /boot/initrd-2.6.29-rc3-tip.img
I was able to load 2.6.23-rc3 only under the most recent version of Xen Unstable Hypervisor. Xen 3.3.1 was unable to recognize kernel image:- Printed "Not ELF format" to console and hanged.
Details here:-
http://bderzhavets.wordpress.com/2009/02/07/attempt-of-install-xen-unstable-dom0-via-2629-rc3-pv_ops-enabled-kernel-on-intel-sataahci-box/
--- On Tue, 2/10/09, jonr@xxxxxxxxxx <jonr@xxxxxxxxxx> wrote:
From: jonr@xxxxxxxxxx <jonr@xxxxxxxxxx> Subject: [Xen-devel] pv_ops with xen-3.3 To: xen-devel@xxxxxxxxxxxxxxxxxxx Date: Tuesday, February 10, 2009, 11:55 AM
I would like to try and test out the 2.6.29-rc4 kernel and see if I can't get Xen-3.3-1 booting. I have patched the 2.6.28 kernel and have a 2.6.29-rc4 kernel. I
have configured the kernel to use xen by following http://wiki.xensource.com/xenwiki/XenParavirtOps.
Now I have the kernel configured and built but am not quite sure how to use this kernel with xen-3.3. When I downloaded the latest xen and ran 'make world' it downloaded the 2.6.18 kernel and is building xen against that. How do I make xen build against my kernel or do I even need to?
Once xen-3.3 is done building do I just substitute my 2.6.29-rc4 kernel in the grub menu.conf or am I missing something?
Thanks for any help,
Jon
_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|