[Top] [All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Boot failure on x86_64 for cs 19175: Cleanup IOMMU interrupt setup

  • To: Xen-Devel <Xen-devel@xxxxxxxxxxxxxxxxxxx>
  • From: Simon Horman <horms@xxxxxxxxxxxx>
  • Date: Fri, 13 Feb 2009 17:02:39 +1100
  • Cc:
  • Delivery-date: Thu, 12 Feb 2009 22:03:14 -0800
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>
On Fri, Feb 13, 2009 at 04:11:21PM +1100, Simon Horman wrote:
> Hi,
> 
> I am expereincing the following boot failure when changeset 19175,
> "Cleanup IOMMU interrupt setup" is applied. The box in question is
> an HP dc7800.

Hi,

The problem that I initially reported seems to be a compiler issues of some
sort.

# x86_64-unknown-linux-gnu-gcc --version
x86_64-unknown-linux-gnu-gcc (GCC) 4.0.2
Copyright (C) 2005 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Looking closer I see that Kouya Shimura has some patches relating
to change set 19175, the subject of that thread is
"fix iommu interrupt setup"

Using a different compiler, gcc (GCC) 4.2.4 (Ubuntu 4.2.4-1ubuntu3), I see
the problem that is being reported there. I will test the patches that
have been posted.

> Kernel: people/horms/sam/xen.gz com1=115200,8n1,0x1248,0 console=com1 
> loglvl=all guest_loglvl=all vtd=1 iommu=1 
> Loading people/horms/sam/xen.gz...........
> Using ELF header.
> Placed kernel section (0x00100000+0x1d0000)
> SECTION: 0x0018f761 --> 0x00100000 (0x13a748)
> SECTION: 0x00000000 --> 0x0023a748 (0x958b8)
> Module: people/horms/sam/vmlinuz-xen-2.6.27 root=/dev/mapper/sam-root_x86_64 
> console=ttyS0 loglevel=8 ro 
> pciback.hide=(00:1d.0)(00:1d.1)(00:1d.2)(00:1d.7)(00:1b.0) 
> Loading 
> people/horms/sam/vmlinuz-xen-2.6.27..................................................................
> SECTION: 0x002c9f35 --> 0x002d0000 (0x803668)
> Placed module (0x002d0000+0x803668)
> Module 0: people/horms/sam/vmlinuz-xen-2.6.27 
> root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglevel=8 ro 
> pciback.hide=(00:1d.0)(00:1d.1)(00:1d.2)(00:1d.7)(00:1b.0) 
>        start = 0x002d0000 end=0x00ad3668 string=0x000101e9
> Module: people/simon/sam/initrd-xen-2.6.27 
> Loading 
> people/simon/sam/initrd-xen-2.6.27..............................................................
> SECTION: 0x00acd59d --> 0x00ad4000 (0x781800)
> Placed module (0x00ad4000+0x781800)
> Module 1: people/simon/sam/initrd-xen-2.6.27 
>        start = 0x00ad4000 end=0x01255800 string=0x00010286
> Relocations:
>     0x0018f5d9 --> 0x00010000 (0x108)
>     0x0018f418 --> 0x00010108 (0x1c1)
>     0x0018f761 --> 0x00100000 (0x13a748)
>     0x00000000 --> 0x0023a748 (0x958b8)
>     0x002c9f35 --> 0x002d0000 (0x803668)
>     0x00acd59d --> 0x00ad4000 (0x781800)
> tr_sections:     0xded7ffd4
> trampoline:      0xded8001c
> trampoline_size: 0x000000b1
> max_run_addr:    0xded7ffd4
> Booting: MBI=0x00010108, entry=0x00100000
> tr_sections[2] begins: 0x115066 __  __            _____ _  _                  
>     _        _     _      
>  \ \/ /___ _ __   |___ /| || |     _   _ _ __  ___| |_ __ _| |__ | | ___ 
>   \  // _ \ '_ \    |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
>   /  \  __/ | | |  ___) |__   _|__| |_| | | | \__ \ || (_| | |_) | |  __/
>  /_/\_\___|_| |_| |____(_) |_|     \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
>                                                                          
> (XEN) Xen version 3.4-unstable (horms@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 
> 4.0.2) Fri Feb 13 16:02:20 EST 2009
> (XEN) Latest ChangeSet: Fri Feb 06 10:36:23 2009 +0000 19175:ab514cfbcdc5
> (XEN) Command line: com1=115200,8n1,0x1248,0 console=com1 loglvl=all 
> guest_loglvl=all vtd=1 iommu=1 
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN)  EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN)  Found 1 MBR signatures
> (XEN)  Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009fc00 (usable)
> (XEN)  000000000009fc00 - 00000000000a0000 (reserved)
> (XEN)  00000000000e8000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 00000000defafe00 (usable)
> (XEN)  00000000defafe00 - 00000000defb1ea0 (ACPI NVS)
> (XEN)  00000000defb1ea0 - 00000000e0000000 (reserved)
> (XEN)  00000000f4000000 - 00000000f8000000 (reserved)
> (XEN)  00000000fec00000 - 00000000fed40000 (reserved)
> (XEN)  00000000fed45000 - 0000000100000000 (reserved)
> (XEN)  0000000100000000 - 000000011c000000 (usable)
> (XEN) System RAM: 4015MB (4111672kB)
> (XEN) ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ)
> (XEN) ACPI: RSDT DEFC1E40, 0044 (r1 HPQOEM SLIC-BPC 20080318             0)
> (XEN) ACPI: FACP DEFC1EE8, 0074 (r1 COMPAQ BEARLAKE        1             0)
> (XEN) ACPI: DSDT DEFC2427, A370 (r1 COMPAQ DSDT_PRJ        1 MSFT  100000E)
> (XEN) ACPI: FACS DEFC1E00, 0040
> (XEN) ACPI: APIC DEFC1F5C, 0084 (r1 COMPAQ BEARLAKE        1             0)
> (XEN) ACPI: ASF! DEFC1FE0, 0063 (r32 COMPAQ BEARLAKE        1             0)
> (XEN) ACPI: MCFG DEFC2043, 003C (r1 COMPAQ BEARLAKE        1             0)
> (XEN) ACPI: TCPA DEFC207F, 0032 (r1 COMPAQ BEARLAKE        1             0)
> (XEN) ACPI: SLIC DEFC20B1, 0176 (r1 HPQOEM SLIC-BPC        1             0)
> (XEN) ACPI: HPET DEFC2227, 0038 (r1 COMPAQ BEARLAKE        1             0)
> (XEN) ACPI: DMAR DEFC225F, 0198 (r1 COMPAQ BEARLAKE        1             0)
> (XEN) NUMA turned off
> (XEN) Faking a node at 0000000000000000-000000011c000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000f9bf0
> (XEN) DMI 2.5 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0xf808
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0]
> (XEN) ACPI:                  wakeup_vec[defc1e0c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 7:7 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
> (XEN) [VT-D]dmar.c:460: Host address width 36
> (XEN) [VT-D]dmar.c:469: found ACPI_DMAR_DRHD
> (XEN) [VT-D]dmar.c:337: dmaru->address = fed90000
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1b.0
> (XEN) [VT-D]dmar.c:469: found ACPI_DMAR_DRHD
> (XEN) [VT-D]dmar.c:337: dmaru->address = fed91000
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:2.0
> (XEN) [VT-D]dmar.c:469: found ACPI_DMAR_DRHD
> (XEN) [VT-D]dmar.c:337: dmaru->address = fed92000
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:3.0
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:3.2
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:3.3
> (XEN) [VT-D]dmar.c:469: found ACPI_DMAR_DRHD
> (XEN) [VT-D]dmar.c:337: dmaru->address = fed93000
> (XEN) [VT-D]dmar.c:346: found INCLUDE_ALL
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:2.0
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.7
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.7
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.0
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.1
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.2
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.0
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.1
> (XEN) Intel VT-d has been enabled, snoop_control=1.
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Initializing CPU#0
> (XEN) Detected 2826.302 MHz processor.
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 0
> (XEN) VMX: Supported advanced features:
> (XEN)  - APIC MMIO access virtualisation
> (XEN)  - APIC TPR shadow
> (XEN)  - Virtual NMI
> (XEN)  - MSR direct-access bitmap
> (XEN) HVM: VMX enabled
> (XEN) MCE: Intel newly family MC Init
> (XEN) Intel machine check reporting enabled on CPU#0.
> (XEN) CPU0: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU0 has no CMCI support
> (XEN) CPU0: Intel(R) Core(TM)2 Duo CPU     E8300  @ 2.83GHz stepping 06
> (XEN) Booting processor 1/1 eip 8c000
> (XEN) Initializing CPU#1
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 6144K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 1
> (XEN) MCE: Intel newly family MC Init
> (XEN) Intel machine check reporting enabled on CPU#1.
> (XEN) CPU1: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU1 has no CMCI support
> (XEN) CPU1: Intel(R) Core(TM)2 Duo CPU     E8300  @ 2.83GHz stepping 06
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using new ACK method
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> (XEN) checking TSC synchronization across 2 CPUs: passed.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Brought up 2 CPUs
> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed
> (XEN) [VT-D]iommu.c:890:d32767 IOMMU: can't request irq
> (XEN) [VT-D]iommu.c:1686:d32767 IOMMU: interrupt setup failed
> (XEN) I/O virtualisation disabled
> (XEN) ACPI sleep modes: S3
> (XEN) mcheck_poll: Init_mcheck_timer
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) elf_init: not an ELF binary
> (XEN) 
> (XEN) ****************************************
> (XEN) Panic on CPU 0:
> (XEN) Could not set up DOM0 guest OS
> (XEN) ****************************************
> (XEN) 
> (XEN) Reboot in five seconds...
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel

-- 
Simon Horman
  VA Linux Systems Japan K.K., Sydney, Australia Satellite Office
  H: www.vergenet.net/~horms/             W: www.valinux.co.jp/en


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.

Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.