[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Dmesg protocol for C2D E8400&ASUS P5K Premium (stack trace came up twice)


  • To: Jeremy Fitzhardinge <jeremy@xxxxxxxx>, Ian Campbell <Ian.Campbell@xxxxxxxxxx>
  • From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
  • Date: Tue, 17 Feb 2009 06:05:47 -0800 (PST)
  • Cc: Xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Tue, 17 Feb 2009 06:06:46 -0800
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=2ay+ZYieuv/5c3iX+jc6CZBSNbvHh8EJodINX7lk9RL9hgRyHPYPB/BuvoIMBVdE/y7UFQRAGwa3etoERV8tZWGzKFkrTshU15wTTbLjBR39pyQ7wY6bXGrfUxPcbKUnati/gcBhrYZu9+ya2KTsRiYqgGdrQLC1lwga+170N/Y=;
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.29-rc5-tip (root@ServerXen331) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Tue Feb 17 05:47:37 EST 2009
[    0.000000] Command line: root=/dev/sdb14 ro console=tty0 pci=nomsi
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  Xen: 000000000009ec00 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 000000000b965000 (usable)
[    0.000000]  Xen: 000000000b965000 - 000000000bb66000 (reserved)
[    0.000000]  Xen: 000000000bb66000 - 0000000040000000 (usable)
[    0.000000]  Xen: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[    0.000000]  Xen: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  Xen: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] last_pfn = 0x40000 max_arch_pfn = 0x100000000
[    0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[    0.000000]  0000000000 - 0040000000 page 4k
[    0.000000] kernel direct mapping tables up to 40000000 @ bbc9000-bdcb000
[    0.000000] last_map_addr: 40000000 end: 40000000
[    0.000000] RAMDISK: 008ea000 - 0b964c00
[    0.000000] ACPI: RSDP 000FBB80, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFF80000, 003C (r1 A_M_I_ OEMRSDT  10000730 MSFT       97)
[    0.000000] ACPI: FACP CFF80200, 0084 (r2 A_M_I_ OEMFACP  10000730 MSFT       97)
[    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[    0.000000] ACPI: DSDT CFF805C0, 8E13 (r1  A0840 A0840001        1 INTL 20060113)
[    0.000000] ACPI: FACS CFF8E000, 0040
[    0.000000] ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC  10000730 MSFT       97)
[    0.000000] ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG  10000730 MSFT       97)
[    0.000000] ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM  10000730 MSFT       97)
[    0.000000] ACPI: HPET CFF893E0, 0038 (r1 A_M_I_ OEMHPET  10000730 MSFT       97)
[    0.000000] ACPI: OSFR CFF89420, 00B0 (r1 A_M_I_ OEMOSFR  10000730 MSFT       97)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 0040000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [000bb66000 - 000bbc9000]   XEN PAGETABLES ==> [000bb66000 - 000bbc9000]
[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #3 [0000200000 - 00008e9d20]    TEXT DATA BSS ==> [0000200000 - 00008e9d20]
[    0.000000]   #4 [00008ea000 - 000b964c00]          RAMDISK ==> [00008ea000 - 000b964c00]
[    0.000000]   #5 [000bbc9000 - 000bd65000]          PGTABLE ==> [000bbc9000 - 000bd65000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0000b965
[    0.000000]     0: 0x0000bb66 -> 0x00040000
[    0.000000] On node 0 totalpages: 261517
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1774 pages reserved
[    0.000000]   DMA zone: 2152 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3528 pages used for memmap
[    0.000000]   DMA32 zone: 254007 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:8ff80000)
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocating 86016 bytes of per cpu data
[    0.000000] trying to map vcpu_info 0 at ffff88000bd7c020, mfn 21bd7c, offset 32
[    0.000000] cpu 0 using vcpu_info at ffff88000bd7c020
[    0.000000] trying to map vcpu_info 1 at ffff88000bd91020, mfn 21bd91, offset 32
[    0.000000] cpu 1 using vcpu_info at ffff88000bd91020
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256159
[    0.000000] Kernel command line: root=/dev/sdb14 ro console=tty0 pci=nomsi
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:1280
[    0.000000] xen: allocated irq 9 for acpi 9
[    0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Detected 3005.632 MHz processor.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console [tty0] enabled
[    0.010000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.010000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.010000] allocated 10485760 bytes of page_cgroup
[    0.010000] please try cgroup_disable=memory option if you don't want
[    0.010000] Checking aperture...
[    0.010000] No AGP bridge found
[    0.010000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.010000] xen_swiotlb_fixup: buf=ffff88000d7f0000 size=67108864
[    0.010000] xen_swiotlb_fixup: buf=ffff880011850000 size=32768
[    0.010000] Placing 64MB software IO TLB between ffff88000d7f0000 - ffff8800117f0000
[    0.010000] software IO TLB at phys 0xd7f0000 - 0x117f0000
[    0.010000] Memory: 763172k/1048576k available (3284k kernel code, 2508k absent, 282220k reserved, 1808k data, 456k init)
[    0.010000] Xen: using vcpuop timer interface
[    0.010000] installing Xen timer for CPU 0
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6011.26 BogoMIPS (lpj=30056320)
[    0.010000] Security Framework initialized
[    0.010000] SELinux:  Disabled at boot.
[    0.010000] Mount-cache hash table entries: 256
[    0.010000] Initializing cgroup subsys ns
[    0.010000] Initializing cgroup subsys cpuacct
[    0.010000] Initializing cgroup subsys memory
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 6144K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 0
[    0.010000] SMP alternatives: switching to UP code
[    0.025132] ACPI: Core revision 20081204
[    0.040082] cpu 0 spinlock event irq 25
[    0.041284] installing Xen timer for CPU 1
[    0.041337] cpu 1 spinlock event irq 31
[    0.041402] SMP alternatives: switching to SMP code
[    0.000005] Initializing CPU#1
[    0.000038] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000041] CPU: L2 cache: 6144K
[    0.000044] CPU: Physical Processor ID: 0
[    0.000046] CPU: Processor Core ID: 0
[    0.070432] Brought up 2 CPUs
[    0.070678] CPU0 attaching sched-domain:
[    0.070681]  domain 0: span 0-1 level CPU
[    0.070685]   groups: 0 1
[    0.070695] CPU1 attaching sched-domain:
[    0.070697]  domain 0: span 0-1 level CPU
[    0.070701]   groups: 1 0
[    0.071272] net_namespace: 1840 bytes
[    0.071318] Booting paravirtualized kernel on Xen
[    0.071361] Xen version: 3.4-unstable (preserve-AD) (dom0)
[    0.071543] Grant table initialized
[    0.071609] Time: 13:41:44  Date: 02/17/09
[    0.071704] NET: Registered protocol family 16
[    0.072093] xenbus_probe_init ok
[    0.072398] ACPI: bus type pci registered
[    0.072967] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.073014] PCI: Not using MMCONFIG.
[    0.073057] PCI: Using configuration type 1 for base access
[    0.075886] bio: create slab <bio-0> at 0
[    0.078848] ACPI: EC: Look up EC in DSDT
[    0.094804] ACPI: Interpreter enabled
[    0.094848] ACPI: (supports S0 S1 S3 S5)
[    0.095030] ACPI: Using IOAPIC for interrupt routing
[    0.095130] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.098470] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.165887] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.181318] ACPI: No dock devices found.
[    0.181427] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.181753] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.181802] pci 0000:00:01.0: PME# disabled
[    0.181987] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
[    0.182123] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
[    0.182258] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f]
[    0.182397] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff]
[    0.182501] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.182550] pci 0000:00:1a.7: PME# disabled
[    0.182668] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[    0.182754] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.182803] pci 0000:00:1b.0: PME# disabled
[    0.182958] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.183007] pci 0000:00:1c.0: PME# disabled
[    0.183171] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.183220] pci 0000:00:1c.4: PME# disabled
[    0.183380] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.183428] pci 0000:00:1c.5: PME# disabled
[    0.183573] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f]
[    0.183709] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
[    0.183844] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f]
[    0.183983] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff]
[    0.184087] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.184136] pci 0000:00:1d.7: PME# disabled
[    0.184400] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.184458] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.184506] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.184685] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07]
[    0.184695] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883]
[    0.184706] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807]
[    0.184716] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483]
[    0.184727] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x941f]
[    0.184737] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9ffe800-0xf9ffefff]
[    0.184803] pci 0000:00:1f.2: PME# supported from D3hot
[    0.184850] pci 0000:00:1f.2: PME# disabled
[    0.184948] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff]
[    0.184974] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.185069] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.185087] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[    0.185105] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[    0.185116] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
[    0.185126] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[    0.185251] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[    0.185257] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe8fffff]
[    0.185267] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.185358] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
[    0.185505] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff]
[    0.185518] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeaeffff]
[    0.185569] pci 0000:03:00.0: PME# supported from D3hot
[    0.185618] pci 0000:03:00.0: PME# disabled
[    0.185739] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
[    0.185753] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
[    0.185767] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
[    0.185780] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
[    0.185794] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[    0.185954] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[    0.185960] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.186067] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[    0.186080] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
[    0.186123] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
[    0.186190] pci 0000:02:00.0: supports D1 D2
[    0.186193] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186243] pci 0000:02:00.0: PME# disabled
[    0.186365] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[    0.186372] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    0.186449] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
[    0.186536] pci 0000:05:03.0: supports D1 D2
[    0.186538] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    0.186587] pci 0000:05:03.0: PME# disabled
[    0.186688] pci 0000:05:04.0: reg 10 io port: [0xe800-0xe8ff]
[    0.186700] pci 0000:05:04.0: reg 14 32bit mmio: [0xfebfec00-0xfebfecff]
[    0.186746] pci 0000:05:04.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    0.186780] pci 0000:05:04.0: supports D1 D2
[    0.186783] pci 0000:05:04.0: PME# supported from D1 D2 D3hot D3cold
[    0.186832] pci 0000:05:04.0: PME# disabled
[    0.186945] pci 0000:00:1e.0: transparent bridge
[    0.186993] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    0.186999] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.187051] pci_bus 0000:00: on NUMA node 0
[    0.187059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.187265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.187338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.187497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.187576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.187659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.209599] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.210000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.210000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.210000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.210000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.210000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.210000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.210000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.210166] ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 67, should be 5E [20081204]
[    0.210364] xen_balloon: Initialising balloon driver.
[    0.210868] SCSI subsystem initialized
[    0.211013] libata version 3.00 loaded.
[    0.211338] PCI: Using ACPI for IRQ routing
[    0.250020] NET: Registered protocol family 8
[    0.250072] NET: Registered protocol family 20
[    0.250182] NetLabel: Initializing
[    0.250224] NetLabel:  domain hash size = 128
[    0.250267] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.250322] NetLabel:  unlabeled traffic allowed by default
[    0.251157] Xen: Initializing Xen DMA ops
[    0.251199] Xen: Enabling DMA fallback to swiotlb
[    0.290026] pnp: PnP ACPI init
[    0.290087] ACPI: bus type pnp registered
[    0.290635] xen: registering gsi 8 triggering 1 polarity 0
[    0.290638] xen_allocate_pirq: returning irq 8 for gsi 8
[    0.290682] xen: --> irq=8
[    0.290685] xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 triggering 1 polarity 0
[    0.290913] xen: registering gsi 13 triggering 1 polarity 0
[    0.290915] xen_allocate_pirq: returning irq 13 for gsi 13
[    0.290960] xen: --> irq=13
[    0.290963] xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 triggering 1 polarity 0
[    0.291781] xen: registering gsi 6 triggering 1 polarity 0
[    0.291784] xen_allocate_pirq: returning irq 6 for gsi 6
[    0.291828] xen: --> irq=6
[    0.291831] xen_set_ioapic_routing: irq 6 gsi 6 vector 64 ioapic 0 pin 6 triggering 1 polarity 0
[    0.293371] xen: registering gsi 4 triggering 1 polarity 0
[    0.293374] xen_allocate_pirq: returning irq 4 for gsi 4
[    0.293418] xen: --> irq=4
[    0.293421] xen_set_ioapic_routing: irq 4 gsi 4 vector 48 ioapic 0 pin 4 triggering 1 polarity 0
[    0.293879] xen: registering gsi 1 triggering 1 polarity 0
[    0.293882] xen_allocate_pirq: returning irq 1 for gsi 1
[    0.293927] xen: --> irq=1
[    0.293930] xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 1 polarity 0
[    0.295548] pnp: PnP ACPI: found 15 devices
[    0.295592] ACPI: ACPI bus type pnp unregistered
[    0.295646] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.295699] system 00:07: ioport range 0x290-0x297 has been reserved
[    0.295750] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.295795] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.295841] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.295886] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.295932] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.295978] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[    0.296024] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
[    0.296070] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.296116] system 00:08: iomem range 0xffe00000-0xffefffff has been reserved
[    0.296162] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
[    0.296213] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.296259] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.296310] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.296361] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.296407] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[    0.296453] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.296499] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[    0.301789] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.301836] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
[    0.301885] pci 0000:00:01.0:   MEM window: 0xfa000000-0xfe8fffff
[    0.301933] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.301995] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[    0.302039] pci 0000:00:1c.0:   IO window: disabled
[    0.302088] pci 0000:00:1c.0:   MEM window: disabled
[    0.302135] pci 0000:00:1c.0:   PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[    0.302198] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[    0.302244] pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
[    0.302294] pci 0000:00:1c.4:   MEM window: 0xfea00000-0xfeafffff
[    0.302343] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.302394] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[    0.302441] pci 0000:00:1c.5:   IO window: 0xc000-0xcfff
[    0.302490] pci 0000:00:1c.5:   MEM window: 0xfe900000-0xfe9fffff
[    0.302539] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.302592] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    0.302638] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.302688] pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.302736] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x000000500fffff
[    0.302806] xen: registering gsi 16 triggering 0 polarity 1
[    0.302815] xen: --> irq=16
[    0.302818] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    0.302877] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.302926] pci 0000:00:01.0: setting latency timer to 64
[    0.302938] xen: registering gsi 17 triggering 0 polarity 1
[    0.302944] xen: --> irq=17
[    0.302946] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    0.303005] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.303054] pci 0000:00:1c.0: setting latency timer to 64
[    0.303066] xen: registering gsi 17 triggering 0 polarity 1
[    0.303069] xen_allocate_pirq: returning irq 17 for gsi 17
[    0.303112] xen: --> irq=17
[    0.303115] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    0.303173] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.303222] pci 0000:00:1c.4: setting latency timer to 64
[    0.303234] xen: registering gsi 16 triggering 0 polarity 1
[    0.303237] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.303281] xen: --> irq=16
[    0.303283] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    0.303341] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.303390] pci 0000:00:1c.5: setting latency timer to 64
[    0.303402] pci 0000:00:1e.0: setting latency timer to 64
[    0.303407] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.303410] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.303413] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    0.303415] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe8fffff]
[    0.303418] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
[    0.303421] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[    0.303423] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[    0.303426] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
[    0.303429] pci_bus 0000:04: resource 2 mem: [0xf8f00000-0xf8ffffff]
[    0.303431] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[    0.303434] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.303437] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.303439] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[    0.303442] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[    0.303444] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.303447] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.303450] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[    0.303452] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[    0.303455] pci_bus 0000:05: resource 0 io:  [0xe000-0xefff]
[    0.303458] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.303460] pci_bus 0000:05: resource 2 mem: [0x50000000-0x500fffff]
[    0.303463] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.303466] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.303526] NET: Registered protocol family 2
[    0.430129] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.430571] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.431122] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.431436] TCP: Hash tables configured (established 131072 bind 65536)
[    0.431482] TCP reno registered
[    0.470140] NET: Registered protocol family 1
[    0.470302] checking if image is initramfs... it is
[    0.591109] Freeing initrd memory: 180715k freed
[    0.652951] audit: initializing netlink socket (disabled)
[    0.653020] type=2000 audit(1234878105.510:1): initialized
[    0.657708] VFS: Disk quotas dquot_6.5.2
[    0.657805] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.657911] msgmni has been set to 2400
[    0.658155] alg: No test for stdrng (krng)
[    0.658218] io scheduler noop registered
[    0.658262] io scheduler anticipatory registered
[    0.658305] io scheduler deadline registered (default)
[    0.658364] io scheduler cfq registered
[    0.658625] pci 0000:01:00.0: Boot video device
[    0.658821] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.659107] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.659426] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.659748] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    0.660523] xenbus_probe_backend_init bus registered ok
[    0.660620] xenbus_probe_frontend_init bus registered ok
[    0.660735] Event-channel device installed.
[    0.660778] ***blkif_init
[    0.662814] *** netif_init
[    0.663532] registering netback
[    0.704905] Linux agpgart interface v0.103
[    0.707120] brd: module loaded
[    0.707310] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.707408] ahci 0000:00:1f.2: version 3.0
[    0.707426] xen: registering gsi 22 triggering 0 polarity 1
[    0.707438] xen: --> irq=22
[    0.707441] xen_set_ioapic_routing: irq 22 gsi 22 vector 176 ioapic 0 pin 22 triggering 0 polarity 1
[    0.707503] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.707632] ahci: SSS flag set, parallel bus scan disabled
[    0.707705] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.707761] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[    0.707821] ahci 0000:00:1f.2: setting latency timer to 64
[    0.708377] scsi0 : ahci
[    0.708619] scsi1 : ahci
[    0.708823] scsi2 : ahci
[    0.709027] scsi3 : ahci
[    0.709230] scsi4 : ahci
[    0.709437] scsi5 : ahci
[    0.709804] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 22
[    0.709860] ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 22
[    0.709916] ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 22
[    0.709973] ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 22
[    0.710004] ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 22
[    0.710004] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 22
[    1.240023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.240635] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.240689] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.241405] ata1.00: configured for UDMA/133
[    1.260140] scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.790023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.790635] ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.790685] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.791394] ata2.00: configured for UDMA/133
[    1.810124] scsi 1:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    2.160024] ata3: SATA link down (SStatus 0 SControl 300)
[    2.530024] ata4: SATA link down (SStatus 0 SControl 300)
[    2.900023] ata5: SATA link down (SStatus 0 SControl 300)
[    3.270024] ata6: SATA link down (SStatus 0 SControl 300)
[    3.290061] xen: registering gsi 16 triggering 0 polarity 1
[    3.290066] xen_allocate_pirq: returning irq 16 for gsi 16
[    3.290121] xen: --> irq=16
[    3.290124] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    3.290183] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.310047] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    3.310116] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    3.310167] ahci 0000:03:00.0: setting latency timer to 64
[    3.310368] scsi6 : ahci
[    3.310570] scsi7 : ahci
[    3.310799] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    3.310856] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    3.660044] ata7: SATA link down (SStatus 0 SControl 300)
[    4.030035] ata8: SATA link down (SStatus 0 SControl 300)
[    4.050212] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    4.050261] xen: registering gsi 17 triggering 0 polarity 1
[    4.050264] xen_allocate_pirq: returning irq 17 for gsi 17
[    4.050308] xen: --> irq=17
[    4.050310] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    4.050369] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.050457] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    4.050552] scsi8 : pata_jmicron
[    4.050748] scsi9 : pata_jmicron
[    4.051916] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    4.051963] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    4.230579] ata9.00: ATAPI: Optiarc DVD RW AD-5200A, 1.03, max UDMA/66
[    4.270586] ata9.00: configured for UDMA/66
[    4.274236] scsi 8:0:0:0: CD-ROM            Optiarc  DVD RW AD-5200A  1.03 PQ: 0 ANSI: 5
[    4.442045] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    4.442090] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.442608] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.470187] mice: PS/2 mouse device common for all mice
[    4.470320] rtc_cmos 00:03: RTC can wake from S4
[    4.470450] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.470519] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    4.470616] cpuidle: using governor ladder
[    4.471163] TCP cubic registered
[    4.471257] Bridge firewalling registered
[    4.471324] IO APIC resources could be not be allocated.
[    4.471580] registered taskstats version 1
[    4.471761]   Magic number: 13:761:685
[    4.471905] rtc_cmos 00:03: setting system clock to 2009-02-17 13:41:48 UTC (1234878108)
[    4.471961] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.472005] EDD information not available.
[    4.472092] Freeing unused kernel memory: 456k freed
[    4.472279] Write protecting the kernel read-only data: 4720k
[    4.488829] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    4.577225] fuse init (API version 7.11)
[    4.606015] device-mapper: uevent: version 1.0.3
[    4.606229] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    4.871859] usbcore: registered new interface driver usbfs
[    4.871932] usbcore: registered new interface driver hub
[    4.877053] usbcore: registered new device driver usb
[    4.879436] uhci_hcd: USB Universal Host Controller Interface driver
[    4.879521] xen: registering gsi 16 triggering 0 polarity 1
[    4.879525] xen_allocate_pirq: returning irq 16 for gsi 16
[    4.879570] xen: --> irq=16
[    4.879574] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    4.879635] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.879691] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.879696] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.879799] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.879884] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    4.880231] usb usb1: configuration #1 chosen from 1 choice
[    4.880306] hub 1-0:1.0: USB hub found
[    4.880362] hub 1-0:1.0: 2 ports detected
[    4.880546] xen: registering gsi 21 triggering 0 polarity 1
[    4.880557] xen: --> irq=21
[    4.880560] xen_set_ioapic_routing: irq 21 gsi 21 vector 184 ioapic 0 pin 21 triggering 0 polarity 1
[    4.880620] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.880673] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.880678] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.880751] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    4.880854] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    4.881017] usb usb2: configuration #1 chosen from 1 choice
[    4.881091] hub 2-0:1.0: USB hub found
[    4.881146] hub 2-0:1.0: 2 ports detected
[    4.881316] xen: registering gsi 18 triggering 0 polarity 1
[    4.881324] xen: --> irq=18
[    4.881327] xen_set_ioapic_routing: irq 18 gsi 18 vector 192 ioapic 0 pin 18 triggering 0 polarity 1
[    4.881387] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.881439] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    4.881444] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    4.881512] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    4.881604] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    4.881765] usb usb3: configuration #1 chosen from 1 choice
[    4.881860] hub 3-0:1.0: USB hub found
[    4.881916] hub 3-0:1.0: 2 ports detected
[    4.882084] xen: registering gsi 23 triggering 0 polarity 1
[    4.882090] xen: --> irq=23
[    4.882093] xen_set_ioapic_routing: irq 23 gsi 23 vector 200 ioapic 0 pin 23 triggering 0 polarity 1
[    4.882153] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.882205] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.882210] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.882278] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    4.882377] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    4.882541] usb usb4: configuration #1 chosen from 1 choice
[    4.882617] hub 4-0:1.0: USB hub found
[    4.882671] hub 4-0:1.0: 2 ports detected
[    4.882828] xen: registering gsi 19 triggering 0 polarity 1
[    4.882835] xen: --> irq=19
[    4.882838] xen_set_ioapic_routing: irq 19 gsi 19 vector 208 ioapic 0 pin 19 triggering 0 polarity 1
[    4.882902] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.882957] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.882962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.883031] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    4.883124] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    4.883283] usb usb5: configuration #1 chosen from 1 choice
[    4.883357] hub 5-0:1.0: USB hub found
[    4.883413] hub 5-0:1.0: 2 ports detected
[    4.883586] xen: registering gsi 18 triggering 0 polarity 1
[    4.883589] xen_allocate_pirq: returning irq 18 for gsi 18
[    4.883634] xen: --> irq=18
[    4.883637] xen_set_ioapic_routing: irq 18 gsi 18 vector 192 ioapic 0 pin 18 triggering 0 polarity 1
[    4.883696] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.883748] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.883752] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.883817] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    4.883901] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    4.884070] usb usb6: configuration #1 chosen from 1 choice
[    4.884145] hub 6-0:1.0: USB hub found
[    4.884201] hub 6-0:1.0: 2 ports detected
[    4.886490] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.886537] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.886618] xen: registering gsi 18 triggering 0 polarity 1
[    4.886621] xen_allocate_pirq: returning irq 18 for gsi 18
[    4.886669] xen: --> irq=18
[    4.886673] xen_set_ioapic_routing: irq 18 gsi 18 vector 192 ioapic 0 pin 18 triggering 0 polarity 1
[    4.886738] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.886921] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    4.886926] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.886998] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[    4.890989] ehci_hcd 0000:00:1a.7: debug port 1
[    4.891040] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    4.891048] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    4.910238] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.910410] usb usb7: configuration #1 chosen from 1 choice
[    4.910485] hub 7-0:1.0: USB hub found
[    4.910544] hub 7-0:1.0: 6 ports detected
[    4.910726] xen: registering gsi 23 triggering 0 polarity 1
[    4.910729] xen_allocate_pirq: returning irq 23 for gsi 23
[    4.910773] xen: --> irq=23
[    4.910776] xen_set_ioapic_routing: irq 23 gsi 23 vector 200 ioapic 0 pin 23 triggering 0 polarity 1
[    4.910835] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.910894] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.910899] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.910966] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    4.914945] ehci_hcd 0000:00:1d.7: debug port 1
[    4.914996] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.915003] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    4.930021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.930165] usb usb8: configuration #1 chosen from 1 choice
[    4.930237] hub 8-0:1.0: USB hub found
[    4.930293] hub 8-0:1.0: 6 ports detected
[    4.936690] sky2 driver version 1.22
[    4.936769] xen: registering gsi 17 triggering 0 polarity 1
[    4.936772] xen_allocate_pirq: returning irq 17 for gsi 17
[    4.936816] xen: --> irq=17
[    4.936819] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    4.936879] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.936934] sky2 0000:02:00.0: setting latency timer to 64
[    4.937131] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[    4.969341] sky2 0000:02:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
[    4.969399]  Part Number: Yukon 88E8056
[    4.969402]  Engineering Level: Rev. 1.2
[    4.969405]  Manufacturer: Marvell
[    4.969825] sky2 eth0: addr 00:1e:8c:25:d9:23
[    4.971723] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    4.971806] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[    4.971884] scsi 8:0:0:0: Attached scsi generic sg2 type 5
[    4.984001] xen: registering gsi 19 triggering 0 polarity 1
[    4.984005] xen_allocate_pirq: returning irq 19 for gsi 19
[    4.984051] xen: --> irq=19
[    4.984055] xen_set_ioapic_routing: irq 19 gsi 19 vector 208 ioapic 0 pin 19 triggering 0 polarity 1
[    4.984116] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    5.016912] Driver 'sr' needs updating - please use bus_type methods
[    5.022203] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    5.022255] Uniform CD-ROM driver Revision: 3.20
[    5.022393] sr 8:0:0:0: Attached scsi CD-ROM sr0
[    5.042287] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febff000-febff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    5.050210] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.050272] xen: registering gsi 16 triggering 0 polarity 1
[    5.050275] xen_allocate_pirq: returning irq 16 for gsi 16
[    5.050319] xen: --> irq=16
[    5.050323] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    5.050382] r8169 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.050462] r8169 0000:05:04.0: no PCI Express capability
[    5.050891] eth1: RTL8169sc/8110sc at 0xffffc20000050c00, 00:1e:8c:25:cc:a5, XID 18000000 IRQ 16
[    5.087921] Driver 'sd' needs updating - please use bus_type methods
[    5.088084] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    5.088163] sd 0:0:0:0: [sda] Write Protect is off
[    5.088208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.088253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.088393] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    5.088472] sd 0:0:0:0: [sda] Write Protect is off
[    5.088524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.088572] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.088633]  sda: sda1 sda2 sda3 sda4 < >
[    5.104837] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.104979] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    5.105059] sd 1:0:0:0: [sdb] Write Protect is off
[    5.105104] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.105150] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.105279] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    5.105357] sd 1:0:0:0: [sdb] Write Protect is off
[    5.106094] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.106139] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.106196]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11<6>usb 7-3: new high speed USB device using ehci_hcd and address 2
[    5.234804]  sdb12 sdb13 sdb14 sdb15 >
[    5.291873] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.386634] usb 7-3: configuration #1 chosen from 1 choice
[    5.820036] usb 6-2: new low speed USB device using uhci_hcd and address 2
[    5.979154] usb 6-2: configuration #1 chosen from 1 choice
[    5.997904] usbcore: registered new interface driver hiddev
[    6.011212] ------------[ cut here ]------------
[    6.011257] WARNING: at kernel/smp.c:329 smp_call_function_many+0x1e9/0x250()
[    6.011303] Hardware name: P5K Premium
[    6.011345] Modules linked in: usbhid(+) hid sd_mod crc_t10dif sr_mod cdrom r8169 mii ohci1394 ieee1394 sg sky2 pata_acpi ata_generic ehci_hcd uhci_hcd usbcore dm_mirror dm_region_hash dm_log dm_snapshot dm_mod thermal processor fan fuse
[    6.012219] Pid: 2303, comm: modprobe Not tainted 2.6.29-rc5-tip #1
[    6.012263] Call Trace:
[    6.012309]  [<ffffffff8024c050>] warn_slowpath+0xd0/0x130
[    6.012356]  [<ffffffff8022d9ae>] ? pvclock_clocksource_read+0x4e/0x90
[    6.012403]  [<ffffffff8020eeed>] ? xen_force_evtchn_callback+0xd/0x10
[    6.012450]  [<ffffffff8020f732>] ? check_events+0x12/0x20
[    6.012495]  [<ffffffff8020f531>] ? xen_clocksource_read+0x21/0x30
[    6.012542]  [<ffffffff80210617>] ? xen_spin_lock+0xa7/0x110
[    6.012587]  [<ffffffff8020f71f>] ? xen_restore_fl_direct_end+0x0/0x1
[    6.012634]  [<ffffffff8052e373>] ? _spin_lock+0x13/0x30
[    6.012681]  [<ffffffff802a6690>] ? perf_counter_task_sched_in+0x60/0x190
[    6.012728]  [<ffffffff8022d9ae>] ? pvclock_clocksource_read+0x4e/0x90
[    6.012776]  [<ffffffff8020bdf9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[    6.012823]  [<ffffffff802360b0>] ? do_flush_tlb_all+0x0/0x50
[    6.012869]  [<ffffffff802742a9>] smp_call_function_many+0x1e9/0x250
[    6.012915]  [<ffffffff802360b0>] ? do_flush_tlb_all+0x0/0x50
[    6.012961]  [<ffffffff802360b0>] ? do_flush_tlb_all+0x0/0x50
[    6.013007]  [<ffffffff80274330>] smp_call_function+0x20/0x30
[    6.013053]  [<ffffffff80251fcf>] on_each_cpu+0x1f/0x50
[    6.013098]  [<ffffffff80235ea7>] flush_tlb_all+0x17/0x20
[    6.013145]  [<ffffffff802cce65>] __purge_vmap_area_lazy+0x145/0x1b0
[    6.013191]  [<ffffffff802cdb55>] vm_unmap_aliases+0x185/0x1a0
[    6.013237]  [<ffffffff8020dde0>] xen_create_contiguous_region+0x60/0x110
[    6.013284]  [<ffffffff8020f732>] ? check_events+0x12/0x20
[    6.013330]  [<ffffffff803b2a77>] xen_alloc_coherent+0x77/0x110
[    6.013377]  [<ffffffff802d3c5c>] dma_pool_alloc+0x1ec/0x290
[    6.013422]  [<ffffffff8020f71f>] ? xen_restore_fl_direct_end+0x0/0x1
[    6.013469]  [<ffffffff802d5a79>] ? kfree+0xb9/0x190
[    6.013524]  [<ffffffffa0065752>] hcd_buffer_alloc+0xd2/0x130 [usbcore]
[    6.013577]  [<ffffffffa00574a5>] usb_buffer_alloc+0x25/0x30 [usbcore]
[    6.013625]  [<ffffffffa0124fc5>] usbhid_start+0x1a5/0x690 [usbhid]
[    6.013674]  [<ffffffffa011532b>] hid_device_probe+0xab/0x100 [hid]
[    6.013721]  [<ffffffff80424ab2>] driver_probe_device+0xa2/0x1e0
[    6.013768]  [<ffffffff80424c90>] ? __device_attach+0x0/0x10
[    6.013813]  [<ffffffff80424c99>] __device_attach+0x9/0x10
[    6.013859]  [<ffffffff80423edb>] bus_for_each_drv+0x6b/0xa0
[    6.013904]  [<ffffffff80424d68>] device_attach+0x88/0x90
[    6.013950]  [<ffffffff80423cc5>] bus_attach_device+0x55/0x80
[    6.013996]  [<ffffffff80422483>] device_add+0x383/0x5f0
[    6.014042]  [<ffffffffa0114ef4>] hid_add_device+0x174/0x1f0 [hid]
[    6.014090]  [<ffffffffa012351f>] hid_probe+0x23f/0x360 [usbhid]
[    6.014142]  [<ffffffffa00633df>] usb_probe_interface+0xcf/0x1a0 [usbcore]
[    6.014190]  [<ffffffff80424ab2>] driver_probe_device+0xa2/0x1e0
[    6.014236]  [<ffffffff80424c8b>] __driver_attach+0x9b/0xa0
[    6.014282]  [<ffffffff80424bf0>] ? __driver_attach+0x0/0xa0
[    6.014328]  [<ffffffff80424263>] bus_for_each_dev+0x63/0x90
[    6.014374]  [<ffffffff804248fc>] driver_attach+0x1c/0x20
[    6.014419]  [<ffffffff80423b18>] bus_add_driver+0x1f8/0x270
[    6.014465]  [<ffffffff80424e70>] driver_register+0x70/0x160
[    6.014517]  [<ffffffffa0063129>] usb_register_driver+0xa9/0x120 [usbcore]
[    6.014565]  [<ffffffffa00f2000>] ? hid_init+0x0/0xa2 [usbhid]
[    6.014612]  [<ffffffffa00f207c>] hid_init+0x7c/0xa2 [usbhid]
[    6.014658]  [<ffffffff8020a04c>] do_one_initcall+0x3c/0x170
[    6.014704]  [<ffffffff802681f3>] ? __blocking_notifier_call_chain+0x63/0x80
[    6.014752]  [<ffffffff80278d2d>] sys_init_module+0xad/0x1f0
[    6.014798]  [<ffffffff802133b2>] system_call_fastpath+0x16/0x1b
[    6.014843] ---[ end trace 9726600f6f864851 ]---
[    6.014887] ------------[ cut here ]------------
[    6.014930] WARNING: at kernel/smp.c:226 smp_call_function_single+0xa4/0x130()
[    6.014984] Hardware name: P5K Premium
[    6.015026] Modules linked in: usbhid(+) hid sd_mod crc_t10dif sr_mod cdrom r8169 mii ohci1394 ieee1394 sg sky2 pata_acpi ata_generic ehci_hcd uhci_hcd usbcore dm_mirror dm_region_hash dm_log dm_snapshot dm_mod thermal processor fan fuse
[    6.015896] Pid: 2303, comm: modprobe Tainted: G        W  2.6.29-rc5-tip #1
[    6.015941] Call Trace:
[    6.015984]  [<ffffffff8024c050>] warn_slowpath+0xd0/0x130
[    6.016031]  [<ffffffff8052af1c>] ? dump_stack+0x72/0x7b
[    6.016076]  [<ffffffff80274e97>] ? print_modules+0x57/0xb0
[    6.016122]  [<ffffffff8024c06a>] ? warn_slowpath+0xea/0x130
[    6.016168]  [<ffffffff8022d9ae>] ? pvclock_clocksource_read+0x4e/0x90
[    6.016215]  [<ffffffff8020eeed>] ? xen_force_evtchn_callback+0xd/0x10
[    6.016261]  [<ffffffff8020f732>] ? check_events+0x12/0x20
[    6.016307]  [<ffffffff8020f71f>] ? xen_restore_fl_direct_end+0x0/0x1
[    6.016353]  [<ffffffff8052e373>] ? _spin_lock+0x13/0x30
[    6.016399]  [<ffffffff802a6690>] ? perf_counter_task_sched_in+0x60/0x190
[    6.016446]  [<ffffffff80274034>] smp_call_function_single+0xa4/0x130
[    6.016492]  [<ffffffff8020bdf9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[    6.016540]  [<ffffffff80274272>] smp_call_function_many+0x1b2/0x250
[    6.016586]  [<ffffffff802360b0>] ? do_flush_tlb_all+0x0/0x50
[    6.016632]  [<ffffffff802360b0>] ? do_flush_tlb_all+0x0/0x50
[    6.016677]  [<ffffffff80274330>] smp_call_function+0x20/0x30
[    6.016723]  [<ffffffff80251fcf>] on_each_cpu+0x1f/0x50
[    6.016768]  [<ffffffff80235ea7>] flush_tlb_all+0x17/0x20
[    6.016814]  [<ffffffff802cce65>] __purge_vmap_area_lazy+0x145/0x1b0
[    6.016860]  [<ffffffff802cdb55>] vm_unmap_aliases+0x185/0x1a0
[    6.016906]  [<ffffffff8020dde0>] xen_create_contiguous_region+0x60/0x110
[    6.016953]  [<ffffffff8020f732>] ? check_events+0x12/0x20
[    6.016999]  [<ffffffff803b2a77>] xen_alloc_coherent+0x77/0x110
[    6.017045]  [<ffffffff802d3c5c>] dma_pool_alloc+0x1ec/0x290
[    6.017090]  [<ffffffff8020f71f>] ? xen_restore_fl_direct_end+0x0/0x1
[    6.017137]  [<ffffffff802d5a79>] ? kfree+0xb9/0x190
[    6.017188]  [<ffffffffa0065752>] hcd_buffer_alloc+0xd2/0x130 [usbcore]
[    6.017240]  [<ffffffffa00574a5>] usb_buffer_alloc+0x25/0x30 [usbcore]
[    6.017288]  [<ffffffffa0124fc5>] usbhid_start+0x1a5/0x690 [usbhid]
[    6.017336]  [<ffffffffa011532b>] hid_device_probe+0xab/0x100 [hid]
[    6.017383]  [<ffffffff80424ab2>] driver_probe_device+0xa2/0x1e0
[    6.017429]  [<ffffffff80424c90>] ? __device_attach+0x0/0x10
[    6.017475]  [<ffffffff80424c99>] __device_attach+0x9/0x10
[    6.017520]  [<ffffffff80423edb>] bus_for_each_drv+0x6b/0xa0
[    6.017566]  [<ffffffff80424d68>] device_attach+0x88/0x90
[    6.017612]  [<ffffffff80423cc5>] bus_attach_device+0x55/0x80
[    6.017657]  [<ffffffff80422483>] device_add+0x383/0x5f0
[    6.017704]  [<ffffffffa0114ef4>] hid_add_device+0x174/0x1f0 [hid]
[    6.017751]  [<ffffffffa012351f>] hid_probe+0x23f/0x360 [usbhid]
[    6.017804]  [<ffffffffa00633df>] usb_probe_interface+0xcf/0x1a0 [usbcore]
[    6.017852]  [<ffffffff80424ab2>] driver_probe_device+0xa2/0x1e0
[    6.017898]  [<ffffffff80424c8b>] __driver_attach+0x9b/0xa0
[    6.017944]  [<ffffffff80424bf0>] ? __driver_attach+0x0/0xa0
[    6.017990]  [<ffffffff80424263>] bus_for_each_dev+0x63/0x90
[    6.018036]  [<ffffffff804248fc>] driver_attach+0x1c/0x20
[    6.018081]  [<ffffffff80423b18>] bus_add_driver+0x1f8/0x270
[    6.018128]  [<ffffffff80424e70>] driver_register+0x70/0x160
[    6.018179]  [<ffffffffa0063129>] usb_register_driver+0xa9/0x120 [usbcore]
[    6.018227]  [<ffffffffa00f2000>] ? hid_init+0x0/0xa2 [usbhid]
[    6.018274]  [<ffffffffa00f207c>] hid_init+0x7c/0xa2 [usbhid]
[    6.018321]  [<ffffffff8020a04c>] do_one_initcall+0x3c/0x170
[    6.018366]  [<ffffffff802681f3>] ? __blocking_notifier_call_chain+0x63/0x80
[    6.018414]  [<ffffffff80278d2d>] sys_init_module+0xad/0x1f0
[    6.018460]  [<ffffffff802133b2>] system_call_fastpath+0x16/0x1b
[    6.018505] ---[ end trace 9726600f6f864852 ]---
[    6.018631] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2:1.0/input/input2
[    6.060161] generic-usb 0003:062A:0001.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.2-2/input0
[    6.060239] usbcore: registered new interface driver usbhid
[    6.060284] usbhid: v2.6:USB HID core driver
[    6.370190] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00000473b7]
[    6.896492] kjournald starting.  Commit interval 5 seconds
[    6.896560] EXT3-fs: mounted filesystem with ordered data mode.
[   11.757348] udevd version 124 started
[   12.218761] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.234445] iTCO_vendor_support: vendor-support=0
[   12.288155] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[   12.288310] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[   12.288468] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.310087] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.432119] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   12.470054] ACPI: Power Button (FF) [PWRF]
[   12.470214] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   12.510110] ACPI: Power Button (CM) [PWRB]
[   12.658279] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   12.658454] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   12.671788] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   12.827168] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   12.960131] cfg80211: Using static regulatory domain info
[   12.960182] cfg80211: Regulatory domain: US
[   12.960225]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.960280]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[   12.960326]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   12.960374]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   12.960426]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   12.960474]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   12.960520]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[   12.960566] cfg80211: Calling CRDA for country: US
[   16.254111] wmaster0 (rtl8187): not using net_device_ops yet
[   16.254574] phy0: Selected rate control algorithm 'minstrel'
[   16.562448] wlan0 (rtl8187): not using net_device_ops yet
[   16.562959] phy0: hwaddr 00:15:af:51:c2:c0, RTL8187vB (default) V1 + rtl8225z2
[   16.563038] usbcore: registered new interface driver rtl8187
[   17.090089] xen: registering gsi 22 triggering 0 polarity 1
[   17.090093] xen_allocate_pirq: returning irq 22 for gsi 22
[   17.090140] xen: --> irq=22
[   17.090143] xen_set_ioapic_routing: irq 22 gsi 22 vector 176 ioapic 0 pin 22 triggering 0 polarity 1
[   17.090204] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   17.090371] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   18.650349] loop: module loaded
[   18.738543] lp: driver loaded but no devices found
[   19.042737] Adding 3903752k swap on /dev/sdb15.  Priority:-1 extents:1 across:3903752k
[   19.437967] EXT3 FS on sdb14, internal journal
[   20.064081] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.138894] sky2 eth0: enabling interface
[   21.356258] NET: Registered protocol family 17
[   23.161628] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   47.202031] NET: Registered protocol family 10
[   47.202848] lo: Disabled Privacy Extensions
[   49.038630] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   49.306762] ppdev: user-space parallel port driver
[   51.191471] Bluetooth: Core ver 2.14
[   51.193707] NET: Registered protocol family 31
[   51.193710] Bluetooth: HCI device and connection manager initialized
[   51.193714] Bluetooth: HCI socket layer initialized
[   51.218750] Bluetooth: L2CAP ver 2.11
[   51.218753] Bluetooth: L2CAP socket layer initialized
[   51.241443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   51.241447] Bluetooth: BNEP filters: protocol multicast
[   51.254966] Bluetooth: SCO (Voice Link) ver 0.6
[   51.254970] Bluetooth: SCO socket layer initialized
[   51.486989] Bluetooth: RFCOMM socket layer initialized
[   51.486999] Bluetooth: RFCOMM TTY layer initialized
[   51.487001] Bluetooth: RFCOMM ver 1.10
[   54.480056] sky2 eth0: disabling interface
[   54.541966] sky2 peth0: enabling interface
[   54.542095] ADDRCONF(NETDEV_UP): peth0: link is not ready
[   55.590692] r8169: eth1: link down
[   55.590786] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   56.262833] sky2 peth0: Link is up at 100 Mbps, full duplex, flow control both
[   57.841480] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   57.880207] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[   58.935379] device peth0 entered promiscuous mode
[   58.946231] eth0: topology change detected, propagating
[   58.946235] eth0: port 1(peth0) entering forwarding state
[   68.030016] peth0: no IPv6 routers present
[   69.250016] eth0: no IPv6 routers present
[   70.989455] xenbus_probe wake_waiting
[   70.989517] xenbus_probe wake_waiting
[   70.990707] xenbus_probe_devices backend
[   70.990845] xenbus_probe_devices failed xenbus_directory
[   70.990890] backend_probe_and_watch devices probed ok
[   70.991032] backend_probe_and_watch watch add ok ok
[   70.991077] backend_probe_and_watch all done
[   70.991120] xenbus_probe_devices device
[   70.991253] xenbus_probe_devices failed xenbus_directory
[   70.991299] frontend_probe_and_watch devices probed ok
[   70.991442] frontend_probe_and_watch watch add ok ok
[   70.991486] frontend_probe_and_watch all done

I was able to reproduce it 3 times . Same picture.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.