Fw: Re: [Xen-devel] Problems with load the most recent 2.6.29-rc6 & Xen unstable on ASUS P5K Premium

[Boris Derzhavets <bderzhavets@xxxxxxxxx>]

>I probably shouldn't have been operating machinery yesterday.
>The crash is probably because I committed the e820 memory rearranging >stuff into the wrong branch, but something may have broken us from >tip/master as well.
>   J

Kernel was already broken at 2/28/09

--- On Sat, 2/28/09, Marc - A. Dahlhaus <mad@xxxxxx> wrote:

From: Marc - A. Dahlhaus <mad@xxxxxx>
Subject: Re: [Xen-devel] Problems with load the most recent 2.6.29-rc6 & Xen unstable on ASUS P5K Premium
To: bderzhavets@xxxxxxxxx
Cc: "Jeremy Fitzhardinge" <jeremy@xxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Saturday, February 28, 2009, 10:11 AM

Here we go...

Grub config used to boot:

title XEN pv_ops dom0 with serial console
root (hd0,1)
kernel /boot/xen-3.4-unstable.gz dom0_mem=256M loglvl=all guest_loglvl=all
com1=9600,8n1 console=com1
module /boot/bzImage-2.6.29-rc6-tip ro root=LABEL=ROOT console=hvc0
earlyprintk=xen 4
module
 /boot/init.rd-2.6.29-rc6-tip

Did a boot test on 3.4-unstable tip and 3.3.1 with dom0-loader-bzImage patch.
Logs attached.

Xen and dom0 kernel are freshly pulled and build from a clean tree. Kernel
config attached. Xen was build with this command after hg clone: make
KERNELS='' dist

After xen hands over the console to dom0 the screen stays blank...

I'll do another tests and boot dom0 with console=ttyS0,9600n8 maybe we get
outputs from the kernel itself then.

Marc

Marc - A. Dahlhaus schrieb:
> Hello Boris,
> hello Jeremy,
> 
> i've the same problems here (but i also didn't got Dom0 up and
running beyond that point before on my Boxes here...).
> I'll got logs over serial console yesterday (Boris: i hope your box
actually have a serial port as i had to get me a cheap Asus Barebone for that
;o) and watched them with the screen utility and there are quite a few
 repeating
backtraces before the whole box stops responding. I'll do another run (after
pulling and building Jeremys remaining changes in) and catch the backtraces into
log files over the the next few hours to post them here.
> 
> Marc
> 
> Boris Derzhavets schrieb:
>> The most recent 2.6.29-rc6 with pvops Dom0 support been compiled
>> on my old box (ASUS P5K Premium)  behaves similar to situation
described bellow for ASUS P5Q-E :-
>> 
>> Screen output interrupts immediately after Xen prints scrubbing for
free
>> ram  .  .  .  .   .   .
>> Just black screen for several second followed by Xen host reboot (
system
>> hangs on box built up on ASUS P5Q-E)
>> At mean time i have no any idea how to get boot logs.
>> 
>> --- On *Fri, 2/27/09, Jeremy Fitzhardinge /<jeremy@xxxxxxxx>/*
wrote:
>> 
>>    
 From: Jeremy Fitzhardinge <jeremy@xxxxxxxx>
>>     Subject: Re: [Xen-devel] Problems with load the most recent
>>     2.6.29-rc6 & Xen unstable on ASUS P5Q-E
>>     To: bderzhavets@xxxxxxxxx
>>     Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
>>     Date: Friday, February 27, 2009, 12:59 PM
>> 
>>     Boris Derzhavets wrote:
>>     > Screen output interrupts immediately after Xen prints
scrambling for free
>>     > ram  .  .  .  .   .   .
>>     > Just black screen for ever.
>>     > Novell's 2.6.27 loads fine under same Xen Unstable.
>>     > 2.6.29-rc3 ( pvops ) also loads fine under same Xen Unstable.
>>     > Box with rc4,rc5 is temporary unavailable.
>>     >
>>     >
>> 
>>     Do you have any diagnostics?  Even a screenshot?
>> 
>>         J
>>
 
>>     _______________________________________________
>>     Xen-devel mailing list
>>     Xen-devel@xxxxxxxxxxxxxxxxxxx
>>     http://lists.xensource.com/xen-devel
>>              
>>
------------------------------------------------------------------------
>> 
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-devel
>>   
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel

Attachment: xen-3.4-tip.log.gz
Description: GNU Zip compressed data

Attachment: xen-3.3.1.log.gz
Description: GNU Zip compressed data

Attachment: config-2.6.29-rc6-tip.gz
Description: GNU Zip compressed data

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel