[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] PCIe 2.0, VT-d and Intel 82576 enhancement for Xen SR-IOV



Yes, using the master BDF can move current logic into Dom0 and makes
hypervisor cleaner. And it does work for VT-d spec 1.2.

But if VT-d spec 1.3 (or AMD/IBM/Sun IOMMU specs) says that the ARI
device and the Virtual Function have their own remapping unit or
something like this, rather than use their masters', how could we support
it using the master BDF? Things evolve fast, we would need to add
another hypercall to enhance the master BDF one after it's in 3.4 --
it would be like when the device_add was added, the VT-d spec didn't
have such requirement, but now we have to add device_add_ext because
the compatibility requirement.

Passing these device specific information down and doing the IOMMU
specific work inside the hypervisor hereditarily come with current
passthrough architecture. After choosing putting all IOMMU things (both
high level remapping data structures and logics, and low level hardware
drivers) into hypervisor, we lost the flexibility to split the matching
up logic and move it back to the Dom0 kernel.

Thanks,
Yu

On Thu, Mar 19, 2009 at 08:05:55PM +0800, Espen Skoglund wrote:
> Why put all this logic into Xen itself?  Finding the matching DRHD
> unit will often "just work" anyway by the way the DHRD scope matching
> is performed.
> 
> That said, yes, I get it that it might sometimes be better to actually
> map the VFs and ARI functions back to the PF before matching.
> However, why not extend the current device_add function and hypercall
> with a master BDF pointing back to the BDF "owning" the function?
> This leaves all of the matching up logic out of the hypervisor.  A
> zero or -1 master BDF could indicate that there is no owner (i.e., it
> owns itself).
> 
>       eSk
> 
> 
> 
> [Yu Zhao]
> > PCIe Alternative Routing-ID Interpretation (ARI) ECN defines the Extended
> > Function -- a function whose function number is greater than 7 within an
> > ARI Device. Intel VT-d spec 1.2 section 8.3.2 specifies that the Extended
> > Function is under the scope of the same remapping unit as the traditional
> > function. The hypervisor needs to know if a function is Extended Function
> > so it can find proper DMAR for it.
> 
> > And section 8.3.3 specifies that the SR-IOV Virtual Function is under the
> > scope of the same remapping unit as the Physical Function. The hypervisor
> > also needs to know if a function is the Virtual Function and which Physical
> > Function it's associated with for same reason.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.