|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] RE: [Xen-changelog] [xen-unstable] xend: specify the slot for pass-through devices
Hi Simon,
Did you actually test your patch and verify it works? -- It doesn't work at
least in my side.
For a statically assigned device ("a pass-through device that is inserted at
boot time"), needn't we modify ioemu to handle the vslot info properly?
BTW, in the python codes inside tools/python/xen, somewhere we use the stirng
'vslot', somewhere we use 'vslt'. We may as well use the same string.
In your patch, tools/python/xen/xend/server/pciif.py:
+ vslot = parse_hex(pci_config.get('vslot', 0)) ===> in the
newly-added line, vslot is not used later??
And in your patch, you only allow a vslot 0x0~0xf. I think we should support
0x0~0x1f.
Thanks,
-- Dexuan
Xen patchbot-unstable wrote:
> # HG changeset patch
> # User Keir Fraser <keir.fraser@xxxxxxxxxx>
> # Date 1237550960 0
> # Node ID 538a64b1ed6389da2c669a76ba26a8e4d670351a
> # Parent 2cd2e78d7c2d9deb083f0035df2876805ffeb065
> xend: specify the slot for pass-through devices
>
> Currently a slot may be specified for a hot-plug device,
> but not for a pass-through device that is inserted at boot time.
> This patch adds support for the latter.
>
> The syntax is:
> BUS:DEV.FUNC[@VSLOT]
> e.g: 0000:00:1d:0@7
>
> This may be important as recent changes that allow any free PCI
> slot to be used for pass-through (and hotplug) may case pass-through
> devices to be assigned in different locations to before. Amongst
> other things, specifying the slot will allow users to move them
> back, if there is a need.
>
> Signed-off-by: Simon Horman <horms@xxxxxxxxxxxx>
> ---
> tools/python/xen/xend/server/pciif.py | 1 +
> tools/python/xen/xm/create.py | 18 +++++++++++++-----
> 2 files changed, 14 insertions(+), 5 deletions(-)
>
> diff -r 2cd2e78d7c2d -r 538a64b1ed63
> tools/python/xen/xend/server/pciif.py ---
> a/tools/python/xen/xend/server/pciif.py Fri Mar 20 10:37:12 2009
> +0000 +++ b/tools/python/xen/xend/server/pciif.py Fri Mar 20 12:09:20
> 2009 +0000 @@ -75,6 +75,7 @@ class
> PciController(DevController): bus =
> parse_hex(pci_config.get('bus', 0)) slot =
> parse_hex(pci_config.get('slot', 0)) func =
> parse_hex(pci_config.get('func', 0)) + vslot =
> parse_hex(pci_config.get('vslot', 0))
>
> opts = pci_config.get('opts', '')
> if len(opts) > 0:
> diff -r 2cd2e78d7c2d -r 538a64b1ed63 tools/python/xen/xm/create.py
> --- a/tools/python/xen/xm/create.py Fri Mar 20 10:37:12 2009 +0000
> +++ b/tools/python/xen/xm/create.py Fri Mar 20 12:09:20 2009 +0000
> @@ -1,4 +1,4 @@
> -#============================================================================
> +#============================================================================UTO
> # This library is free software; you can redistribute it and/or
> # modify it under the terms of version 2.1 of the GNU Lesser General
> Public # License as published by the Free Software Foundation.
> @@ -32,6 +32,7 @@ from xen.xend import osdep
> from xen.xend import osdep
> import xen.xend.XendClient
> from xen.xend.XendBootloader import bootloader
> +from xen.xend.XendConstants import *
> from xen.xend.server.DevConstants import xenbusState
> from xen.util import blkif
> from xen.util import vscsi_util
> @@ -322,10 +323,12 @@ gopts.var('disk', val='phy:DEV,VDEV,MODE
> backend driver domain to use for the disk.
> The option may be repeated to add more than one disk.""")
>
> -gopts.var('pci',
> val='BUS:DEV.FUNC[,msitranslate=0|1][,power_mgmt=0|1]',
> +gopts.var('pci',
>
>
> val='BUS:DEV.FUNC[@VSLOT][,msitranslate=0|1][,power_mgmt=0|1]',
> fn=append_value, default=[], use="""Add a PCI device to a domain,
> using given params (in hex). For example 'pci=c0:02.1'. +
> If VSLOT is supplied the device will be inserted into that
> + virtual slot in the guest, else a free slot is
> selected. If msitranslate is set, MSI-INTx translation is enabled if
> possible. Guest that doesn't support MSI will get IO-APIC type
> IRQs translated from physical MSI, HVM only. Default is 1. @@
> -696,7 +699,7 @@ def configure_pci(config_devs, vals): """Create
> the config for pci devices. """ config_pci = [] - for (domain,
> bus, slot, func, opts) in vals.pci: + for (domain, bus, slot,
> func, vslot, opts) in vals.pci: config_pci_opts = []
> d = comma_sep_kv_to_dict(opts)
>
> @@ -707,7 +710,7 @@ def configure_pci(config_devs, vals):
> config_pci_opts.append([k, d[k]])
>
> config_pci_bdf = ['dev', ['domain', domain], ['bus', bus], \
> - ['slot', slot], ['func', func]]
> + ['slot', slot], ['func', func], ['vslot',
> vslot]] map(f, d.keys())
> if len(config_pci_opts)>0:
> config_pci_bdf.append(['opts', config_pci_opts])
> @@ -1054,16 +1057,21 @@ def preprocess_pci(vals):
> r"(?P<bus>[0-9a-fA-F]{1,2})[:,]" + \
> r"(?P<slot>[0-9a-fA-F]{1,2})[.,]" + \
> r"(?P<func>[0-7])" + \
> - r"(,(?P<opts>.*))?$", pci_dev_str)
> + r"(@(?P<vslot>[0-9a-fA-F]))?" + \
> + r"(,(?P<opts>.*))?$", \
> + pci_dev_str)
> if pci_match!=None:
> pci_dev_info = pci_match.groupdict('')
> if pci_dev_info['domain']=='':
> pci_dev_info['domain']='0'
> + if pci_dev_info['vslot']=='':
> + pci_dev_info['vslot']="%02x" % AUTO_PHP_SLOT
> try:
> pci.append( ('0x'+pci_dev_info['domain'], \
> '0x'+pci_dev_info['bus'], \
> '0x'+pci_dev_info['slot'], \
> '0x'+pci_dev_info['func'], \
> + '0x'+pci_dev_info['vslot'], \
> pci_dev_info['opts']))
> except IndexError:
> err('Error in PCI slot syntax "%s"'%(pci_dev_str))
>
> _______________________________________________
> Xen-changelog mailing list
> Xen-changelog@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-changelog
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |