[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH 01/10] xen: groundwork for xen support
- configure script and build system changes. - wind up new machine type. - add -xen-* command line options. Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx> --- Makefile.target | 7 +++++ configure | 34 +++++++++++++++++++++++++++ hw/boards.h | 3 ++ hw/xen.h | 20 ++++++++++++++++ hw/xen_machine_pv.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ qemu-options.hx | 11 +++++++++ target-i386/machine.c | 3 ++ vl.c | 12 +++++++++ 8 files changed, 151 insertions(+), 0 deletions(-) create mode 100644 hw/xen.h create mode 100644 hw/xen_machine_pv.c diff --git a/Makefile.target b/Makefile.target index b32d1af..1cad75e 100644 --- a/Makefile.target +++ b/Makefile.target @@ -557,6 +557,13 @@ ifdef CONFIG_BLUEZ LIBS += $(CONFIG_BLUEZ_LIBS) endif +# xen backend driver support +XEN_OBJS := xen_machine_pv.o +ifeq ($(CONFIG_XEN), yes) + OBJS += $(XEN_OBJS) + LIBS += $(XEN_LIBS) +endif + # SCSI layer OBJS+= lsi53c895a.o esp.o diff --git a/configure b/configure index 15b7856..252d90c 100755 --- a/configure +++ b/configure @@ -190,6 +190,7 @@ aix="no" blobs="yes" fdt="yes" sdl_x11="no" +xen="yes" # OS specific if check_define __linux__ ; then @@ -409,6 +410,8 @@ for opt do ;; --disable-kqemu) kqemu="no" ;; + --disable-xen) xen="no" + ;; --disable-brlapi) brlapi="no" ;; --disable-bluez) bluez="no" @@ -568,6 +571,7 @@ echo " Available drivers: $audio_possible_drivers" echo " --audio-card-list=LIST set list of emulated audio cards [$audio_card_list]" echo " Available cards: $audio_possible_cards" echo " --enable-mixemu enable mixer emulation" +echo " --disable-xen disable xen backend driver support" echo " --disable-brlapi disable BrlAPI" echo " --disable-vnc-tls disable TLS encryption for VNC server" echo " --disable-vnc-sasl disable SASL encryption for VNC server" @@ -781,6 +785,22 @@ else fi ########################################## +# xen probe + +if test "$xen" = "yes" ; then +cat > $TMPC <<EOF +#include <xenctrl.h> +#include <xs.h> +int main(void) { xs_daemon_open; xc_interface_open; } +EOF + if $cc $ARCH_CFLAGS -c -o $TMPO $TMPC -lxenstore -lxenctrl 2> /dev/null ; then + : + else + xen="no" + fi +fi + +########################################## # SDL probe sdl_too_old=no @@ -1211,6 +1231,7 @@ if test -n "$sparc_cpu"; then echo "Target Sparc Arch $sparc_cpu" fi echo "kqemu support $kqemu" +echo "xen support $xen" echo "brlapi support $brlapi" echo "Documentation $build_docs" [ ! -z "$uname_release" ] && \ @@ -1512,6 +1533,9 @@ if test "$bluez" = "yes" ; then echo "CONFIG_BLUEZ_LIBS=$bluez_libs" >> $config_mak echo "#define CONFIG_BLUEZ 1" >> $config_h fi +if test "$xen" = "yes" ; then + echo "XEN_LIBS=-lxenstore -lxenctrl" >> $config_mak +fi if test "$aio" = "yes" ; then echo "#define CONFIG_AIO 1" >> $config_h echo "CONFIG_AIO=yes" >> $config_mak @@ -1673,6 +1697,11 @@ case "$target_cpu" in echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak echo "#define CONFIG_KVM 1" >> $config_h fi + if test "$xen" = "yes" -a "$target_softmmu" = "yes"; + then + echo "CONFIG_XEN=yes" >> $config_mak + echo "#define CONFIG_XEN 1" >> $config_h + fi ;; x86_64) echo "TARGET_ARCH=x86_64" >> $config_mak @@ -1688,6 +1717,11 @@ case "$target_cpu" in echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak echo "#define CONFIG_KVM 1" >> $config_h fi + if test "$xen" = "yes" -a "$target_softmmu" = "yes" + then + echo "CONFIG_XEN=yes" >> $config_mak + echo "#define CONFIG_XEN 1" >> $config_h + fi ;; alpha) echo "TARGET_ARCH=alpha" >> $config_mak diff --git a/hw/boards.h b/hw/boards.h index 1e18ba6..215ccdc 100644 --- a/hw/boards.h +++ b/hw/boards.h @@ -34,6 +34,9 @@ extern QEMUMachine axisdev88_machine; extern QEMUMachine pc_machine; extern QEMUMachine isapc_machine; +/* xen_machine.c */ +extern QEMUMachine xenpv_machine; + /* ppc.c */ extern QEMUMachine prep_machine; extern QEMUMachine core99_machine; diff --git a/hw/xen.h b/hw/xen.h new file mode 100644 index 0000000..3c8da41 --- /dev/null +++ b/hw/xen.h @@ -0,0 +1,20 @@ +#ifndef QEMU_HW_XEN_H +#define QEMU_HW_XEN_H 1 +/* + * public xen header + * stuff needed outside xen-*.c, i.e. interfaces to qemu. + * must not depend on any xen headers being present in + * /usr/include/xen, so it can be included unconditionally. + */ + +/* xen-machine.c */ +enum xen_mode { + XEN_EMULATE = 0, // xen emulation, using xenner (default) + XEN_CREATE, // create xen domain + XEN_ATTACH // attach to xen domain created by xend +}; + +extern uint32_t xen_domid; +extern enum xen_mode xen_mode; + +#endif /* QEMU_HW_XEN_H */ diff --git a/hw/xen_machine_pv.c b/hw/xen_machine_pv.c new file mode 100644 index 0000000..081df0b --- /dev/null +++ b/hw/xen_machine_pv.c @@ -0,0 +1,61 @@ +/* + * QEMU Xen PV Machine + * + * Copyright (c) 2007 Red Hat + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw.h" +#include "pc.h" +#include "sysemu.h" +#include "boards.h" +#include "xen.h" + +uint32_t xen_domid; +enum xen_mode xen_mode = XEN_EMULATE; + +static void xen_init_pv(ram_addr_t ram_size, int vga_ram_size, + const char *boot_device, + const char *kernel_filename, + const char *kernel_cmdline, + const char *initrd_filename, + const char *cpu_model) +{ + CPUState *env; + + /* Initialize a dummy CPU */ + if (cpu_model == NULL) { +#ifdef TARGET_X86_64 + cpu_model = "qemu64"; +#else + cpu_model = "qemu32"; +#endif + } + env = cpu_init(cpu_model); + env->halted = 1; +} + +QEMUMachine xenpv_machine = { + .name = "xenpv", + .desc = "Xen Para-virtualized PC", + .init = xen_init_pv, + .ram_require = (4 * 1024 * 1024) | RAMSIZE_FIXED, + .max_cpus = 1, +}; diff --git a/qemu-options.hx b/qemu-options.hx index c40ea1e..9fc0625 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -1305,6 +1305,17 @@ Enable KVM full virtualization support. This option is only available if KVM support is enabled when compiling. ETEXI +#ifdef CONFIG_XEN +DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid, + "-xen-domid id specify xen guest domain id\n") +DEF("xen-create", 0, QEMU_OPTION_xen_create, + "-xen-create create domain using xen hypercalls, bypassing xend\n" + " warning: should not be used when xend is in use\n") +DEF("xen-attach", 0, QEMU_OPTION_xen_attach, + "-xen-attach attach to existing xen domain\n" + " xend will use this when starting qemu\n") +#endif + DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \ "-no-reboot exit instead of rebooting\n") STEXI diff --git a/target-i386/machine.c b/target-i386/machine.c index 1cf49d5..1b0d36d 100644 --- a/target-i386/machine.c +++ b/target-i386/machine.c @@ -9,6 +9,9 @@ void register_machines(void) { qemu_register_machine(&pc_machine); qemu_register_machine(&isapc_machine); +#ifdef CONFIG_XEN + qemu_register_machine(&xenpv_machine); +#endif } static void cpu_put_seg(QEMUFile *f, SegmentCache *dt) diff --git a/vl.c b/vl.c index 4bd173f..889aaf6 100644 --- a/vl.c +++ b/vl.c @@ -138,6 +138,7 @@ int main(int argc, char **argv) #include "hw/isa.h" #include "hw/baum.h" #include "hw/bt.h" +#include "hw/xen.h" #include "bt-host.h" #include "net.h" #include "monitor.h" @@ -4949,6 +4950,17 @@ int main(int argc, char **argv, char **envp) run_as = optarg; break; #endif +#ifdef CONFIG_XEN + case QEMU_OPTION_xen_domid: + xen_domid = atoi(optarg); + break; + case QEMU_OPTION_xen_create: + xen_mode = XEN_CREATE; + break; + case QEMU_OPTION_xen_attach: + xen_mode = XEN_ATTACH; + break; +#endif } } } -- 1.6.2.2 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |