Main (Console): Nvidia 9500 GT PCI Express
Secondary: Nvidia 8800 GTS PCI Express
Yes, I binned the ASUS P6T due to bad VT-d support in the BIOS.
With the latest BIOS from Intel, the dx58so has enable/disable for VT-d, ICH FLR and Interrupt Mapping! Helped a lot with getting this working ...
Dom0:
2.6.18-xen0 (built from xen-3.4-rc1)
DomU:
2.6.26-1-xen-amd64 (deb lenny shipped)
SUCCESS! - Linux DomU with the official drivers from Nvidia (180.44) .. boot DomU into console, patch and install Nvidia driver, then started X using defaults. gdm chooser appeared on Secondary screen!!
So far, i`m using VNC or Synergy to control the DomU (from Dom0 also running X/gdm) and it is good and stable.
ISSUES:
This is only possible after a clean restart of the physical machine. Dom0 kernel seems to have problems with the IRQ. BUG trap: "irq has gone away" after attempting to start DomU a second time, Dom0 kernel displays:
Disabling IRQ#. (the IRQ IS being shared on Dom0 with a usb controller, but im assuming this is already patched from reading xen history)
Also confirmed that this is NOT possible under a HVM or running Windows in a DomU, this could be due to the IRQ corruption but i`m not really sure, in both cases the PCI device is visible but the driver will not load
:(
As these vga cards dont support FLR, would the FLR code when attempting d3r or sbr cause the interrupt corruption ?
Some steer and some assistance would help here, i`m trying to get this working for HVM too !?
BTW: I`m eagerly awaiting Jeremy Fitzhardinge to bring pciback.ko to the modern kernels ! Support for this chipset in 2.6.18 is not very good and i would like to try pvops and PCI passthrough. (although, got a hang
with x2apic and IRQ mapping enabled)
I`m willing to help move the development of xen forwards with any testing or assistance you guys need!
Thanks,
Tim
