Hi Ian,
I noticed that you updated the qemu-dm passthrough debug messages
recently and was wondering if you could help me with this issue?
(Please see xen-devel postings for further info)
To sum things up, I have a non-hvm DomU with PCI Passthrough
working successfully. The problem is that this is not working for any hvm DomU.
Is this BAR warning related to my issue? I`m assume the vendor driver is
attempting to set BAR and not just accepting the values passed in.
What I find strange is that I am using the vendor driver
under the non-hvm DomU also. Maybe pcifront is doing something that qemu-dm is
not ?
Here is the qemu-dm log output … (relevant parts)
register_real_device: Assigning real physical device 03:00.0
...
pt_register_regions: IO region registered (size=0x01000000
base_addr=0xb2000000)
pt_register_regions: IO region registered (size=0x10000000
base_addr=0xe000000c)
pt_register_regions: IO region registered (size=0x02000000
base_addr=0xb0000004)
pt_register_regions: IO region registered (size=0x00000080
base_addr=0x00001001)
pt_msi_setup: msi mapped with pirq ff
register_real_device: Real physical device 03:00.0
registered successfuly!
IRQ type = MSI-INTx
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory
area. now is rw state.
xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt):
read error
xs_read(): vncpasswd get error. /vm/900c41f9-a3f6-d78f-2270-93e116ee07e7/vncpasswd.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count:
0, size: 0
pt_pci_write_config: Warning: Guest attempt to set address
to unused Base Address Register. [00:03.0][Offset:30h][Length:4]
pt_iomem_map: e_phys=e0000000 maddr=e0000000 type=8
len=268435456 index=1 first_map=1
cirrus vga map change while on lfb mode
pt_iomem_map: e_phys=f2000000 maddr=b0000000 type=0 len=33554432
index=3 first_map=1
pt_iomem_map: e_phys=f4000000 maddr=b2000000 type=0
len=16777216 index=0 first_map=1
pt_pci_write_config: Warning: Guest attempt to set address
to unused Base Address Register. [00:03.0][Offset:30h][Length:4]
pt_ioport_map: e_phys=c200 pio_base=1000 len=128 index=5
first_map=1
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory
area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory
area. now is ro state.
track_dirty_vram(f0000000, 26) failed (-1, 22)
track_dirty_vram(f0000000, 26) failed (-1, 22)
track_dirty_vram(f0000000, 26) failed (-1, 22)
track_dirty_vram(f0000000, 26) failed (-1, 22)
Many Thanks,
Tim
