|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] linux distribution ?
What exactly is the error you're getting?Also, how are you building linux (what commands)? I checked my config and I have removed the ATA (PATA) driver and compiled the SATA driver into the kernel (not a module). I don't think sending you the config will help much as we may not have the same hardware (and I may have made other machine-specific changes to it... I can't remember). How is your grub configured? Maybe it's a bad option there? Patrick Dulloor wrote: I hava a sata drive and actually I had taken care of the driver part (afaik). I cross-verified /proc/modules in initramfs. When I tried restarting udevd (on initramfs shell), it warns about deprecated sysfs. It does make sense for even me to downgrade back to 8.10. But, to figure this out, can you please send over your .config ? -dulloor On Thu, May 21, 2009 at 7:47 PM, Patrick Colp <pjcolp@xxxxxxxxx> wrote:Yes, I was able to do it. I only down-graded my test box to 8.10 because I didn't want to deal with python stuff (and to make sure that errors I got when running my code was because of my code and not some sort of weird incompatibility). Sometimes the 2.6.18 driver gets confused with sata stuff. If both the regular (pata) and sata drivers are installed, it will pick the wrong one. I forget which way around you want to make it... I think you want to have the sata ones only, but I'll check in the morning. If you're not sure which driver you're needing, do an lspci and it'll say which IDE system you have (or just remove all pata/ide drivers in the kernel config and try again, but you will probably have to remove /lib/modules/2.6.18.8-xen first, to make sure the old one doesn't stick around by accident). Patrick Dulloor wrote:Is anyone able to boot 2.6.18-xen on 9.04 ubuntu (pvops is fine). - mountroot in my initramfs fails, cause udev doesn't set up any block /dev/<...>. - All required modules seem to be loaded (checked both in scripts and at initramfs shell), but obviously something is missing in 2.6.18 -dulloor On Thu, May 21, 2009 at 6:42 AM, Tim Post <echo@xxxxxxxxxxxx> wrote:Sorry for top posting, another case in point: Depending on the distro, 'awk' might not work for configuring Linux. A warning could be generated telling the user that installing 'gawk' might be a good idea. Moreover, we warn about the absence of hg, git, bcc, etc. The idea is, if the 'check' script spews stderr to some file, that file becomes a list of stuff that the user would (probably) want to install. Again, I am in NO way suggesting ./configure --enable-kernels --enable-ocaml-stubdom , etc, nor am I suggesting that the script create Makefiles. I could do that, I would NOT want to maintain it, neither would anyone else on this list. Said script could also 'better advertise' other targets in the Makefile, i.e. if Mercurial is not installed. At the least, as a 'general failure', make help could be advertised. Cheers, --Tim On Thu, 2009-05-21 at 18:27 +0800, Tim Post wrote:On Thu, 2009-05-21 at 05:53 -0400, Dulloor wrote:Keir et al - I am on ubuntu and every time I upgrade my distro (dom-0), I end up spending half-a-day getting xen working again, like this time on moving to jaunty/karmic (problem booting 2.6.18 based xen and then python version). Which distro do the xensource guys use for their development ? All I am interested in is xen development/test environment. -dulloorYou might consider just building Xen from source (tools andhypervisor),which takes it completely out of the scope of your package manager. I know that is taboo in some circles, however it gives you greater flexibility when upgrading, while also giving you the ability to test experimental patches. The problem is, doing this often violates enterprise warranties. 99.9% of the time, I'd rather just trust my distro when it comes to packages. When it comes to Xen, I usually recommend (and install) the latest faithful official release. The one and only time I just used distro packages was with Ubuntu Hardy (LTS) .. and that was chaotic (timegoingbackwards, etc). There was once a universal installer script .. can that be resurrected and possibly rely on m4 being present for developers? Using that, the user knows with no uncertainty exactly what they are missing (and what version is needed). For instance, a dependency on 32 bit stubs when building on x86_64. It does not have to be named ./configure, it does not have to create makefiles and I am happy to maintain it. The drawback is 6k+ lines of generated shell code that has to be tracked in the hg. It could be ... scripts/checkbuildconfig .. or whatever. It would notbea configuration tool, just a diagnostic tool that offers hints on what is needed to build. Why clutter the Makefile needlessly? A script would be more portable, anyway. This approach has solved this exact problem for decades. Cheers, --Tim _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel------------------------------------------------------------------------ _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel------------------------------------------------------------------------ _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |