[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] linux: try harder to balloon up under memory pressure.



> I also thought about making it back-off on each successive failure but
> decided that was getting ahead of myself too.

Yes, and then the next step is to have it optionally adapt even
more intelligently -- based on kernel-internal memory metrics.
My first attempt at self-ballooning was in the
balloon driver, but I found that the key metric I wanted,
while available from /proc/meminfo, wasn't exported
within the kernel itself.  (Go figure.)  But I decided
putting the policy in user-space was better anyway.

However, for balloon_timer, the default of once per second
(correct?) seems too infrequent when the guest needs
memory NOW, given that the alternative is swapping or OOMs.
OTOH, when most of the time repeated requests will
fail, no sense invoking the timer more frequently.
So some flexibility may be warranted.

> -----Original Message-----
> From: Ian Campbell [mailto:Ian.Campbell@xxxxxxxxxxxxx]
> Sent: Friday, June 05, 2009 8:39 AM
> To: Dan Magenheimer
> Cc: xen-devel; Keir Fraser; Jeremy Fitzhardinge
> Subject: RE: [Xen-devel] linux: try harder to balloon up under memory
> pressure.
> 
> 
> On Fri, 2009-06-05 at 10:30 -0400, Dan Magenheimer wrote:
> > Suggestion:  Perhaps the balloon_timer interval should
> > be configurable via sysfs?
> 
> Perhaps. It'd be preferable to have a default which Just Works though.
> I'd be inclined to wait until someone has a concrete problem with the
> interval and then decide whether the default simply needs 
> adjusting or a
> tuning nob is required.
> 
> I also thought about making it back-off on each successive failure but
> decided that was getting ahead of myself too.
> 
> Ian.
> 
> > 
> > > -----Original Message-----
> > > From: Ian Campbell [mailto:Ian.Campbell@xxxxxxxxxxxxx]
> > > Sent: Friday, June 05, 2009 4:57 AM
> > > To: xen-devel
> > > Cc: Keir Fraser
> > > Subject: [Xen-devel] linux: try harder to balloon up under memory
> > > pressure.
> > > 
> > > 
> > > Currently if the balloon driver is unable to increase the guest's
> > > reservation it assumes the failure was due to reaching its full
> > > allocation, gives up on the ballooning operation and 
> records the limit
> > > it reached as the "hard limit". The driver will not try 
> again until
> > > the target is set again (even to the same value).
> > > 
> > > However it is possible that ballooning has in fact failed due to
> > > memory pressure in the host and therefore it is desirable to keep
> > > attempting to reach the target in case memory becomes 
> available. The
> > > most likely scenario is that some guests are ballooning down while
> > > others are ballooning up and therefore there is temporary memory
> > > pressure while things stabilise. You would not expect a 
> well behaved
> > > toolstack to ask a domain to balloon to more than its 
> allocation nor
> > > would you expect it to deliberately over-commit memory by setting
> > > balloon targets which exceed the total host memory.
> > > 
> > > This patch drops the concept of a hard limit and causes 
> the balloon
> > > driver to retry increasing the reservation on a timer in the same
> > > manner as when decreasing the reservation.
> > > 
> > > Also if we partially succeed in increasing the reservation
> > > (i.e. receive less pages than we asked for) then we may 
> as well keep
> > > those pages rather than returning them to Xen.
> > > 
> > > This patch is for the 2.6.18-xen tree.
> > > 
> > > Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
> > > 
> > > diff -r fd9c565657b8 drivers/xen/balloon/balloon.c
> > > --- a/drivers/xen/balloon/balloon.c       Thu Jun 04 
> 16:26:49 2009 +0100
> > > +++ b/drivers/xen/balloon/balloon.c       Fri Jun 05 
> 11:56:22 2009 +0100
> > > @@ -188,7 +188,7 @@
> > >  
> > >  static unsigned long current_target(void)
> > >  {
> > > - unsigned long target = min(bs.target_pages, bs.hard_limit);
> > > + unsigned long target = bs.target_pages;
> > >   if (target > (bs.current_pages + bs.balloon_low + 
> > > bs.balloon_high))
> > >           target = bs.current_pages + bs.balloon_low + 
> > > bs.balloon_high;
> > >   return target;
> > > @@ -255,26 +255,12 @@
> > >   }
> > >  
> > >   set_xen_guest_handle(reservation.extent_start, frame_list);
> > > - reservation.nr_extents   = nr_pages;
> > > - rc = HYPERVISOR_memory_op(
> > > -         XENMEM_populate_physmap, &reservation);
> > > - if (rc < nr_pages) {
> > > -         if (rc > 0) {
> > > -                 int ret;
> > > + reservation.nr_extents = nr_pages;
> > > + rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, 
> > > &reservation);
> > > + if (rc < 0)
> > > +         goto out;
> > >  
> > > -                 /* We hit the Xen hard limit: reprobe. */
> > > -                 reservation.nr_extents = rc;
> > > -                 ret = 
> > > HYPERVISOR_memory_op(XENMEM_decrease_reservation,
> > > -                                 &reservation);
> > > -                 BUG_ON(ret != rc);
> > > -         }
> > > -         if (rc >= 0)
> > > -                 bs.hard_limit = (bs.current_pages + rc -
> > > -                                  bs.driver_pages);
> > > -         goto out;
> > > - }
> > > -
> > > - for (i = 0; i < nr_pages; i++) {
> > > + for (i = 0; i < rc; i++) {
> > >           page = balloon_retrieve();
> > >           BUG_ON(page == NULL);
> > >  
> > > @@ -302,13 +288,13 @@
> > >           balloon_free_page(page);
> > >   }
> > >  
> > > - bs.current_pages += nr_pages;
> > > + bs.current_pages += rc;
> > >   totalram_pages = bs.current_pages;
> > >  
> > >   out:
> > >   balloon_unlock(flags);
> > >  
> > > - return 0;
> > > + return rc < 0 ? rc : rc != nr_pages;
> > >  }
> > >  
> > >  static int decrease_reservation(unsigned long nr_pages)
> > > @@ -420,7 +406,6 @@
> > >  void balloon_set_new_target(unsigned long target)
> > >  {
> > >   /* No need for lock. Not read-modify-write updates. */
> > > - bs.hard_limit   = ~0UL;
> > >   bs.target_pages = max(target, minimum_target());
> > >   schedule_work(&balloon_worker);
> > >  }
> > > @@ -498,17 +483,11 @@
> > >           "Requested target:   %8lu kB\n"
> > >           "Low-mem balloon:    %8lu kB\n"
> > >           "High-mem balloon:   %8lu kB\n"
> > > -         "Driver pages:       %8lu kB\n"
> > > -         "Xen hard limit:     ",
> > > +         "Driver pages:       %8lu kB\n",
> > >           PAGES2KB(bs.current_pages), PAGES2KB(bs.target_pages), 
> > >           PAGES2KB(bs.balloon_low), PAGES2KB(bs.balloon_high),
> > >           PAGES2KB(bs.driver_pages));
> > >  
> > > - if (bs.hard_limit != ~0UL)
> > > -         len += sprintf(page + len, "%8lu kB\n",
> > > -                        PAGES2KB(bs.hard_limit));
> > > - else
> > > -         len += sprintf(page + len, "     ??? kB\n");
> > >  
> > >   *eof = 1;
> > >   return len;
> > > @@ -539,7 +518,6 @@
> > >   bs.balloon_low   = 0;
> > >   bs.balloon_high  = 0;
> > >   bs.driver_pages  = 0UL;
> > > - bs.hard_limit    = ~0UL;
> > >  
> > >   init_timer(&balloon_timer);
> > >   balloon_timer.data = 0;
> > > diff -r fd9c565657b8 drivers/xen/balloon/common.h
> > > --- a/drivers/xen/balloon/common.h        Thu Jun 04 
> 16:26:49 2009 +0100
> > > +++ b/drivers/xen/balloon/common.h        Fri Jun 05 
> 11:56:22 2009 +0100
> > > @@ -35,8 +35,6 @@
> > >   /* We aim for 'current allocation' == 'target allocation'. */
> > >   unsigned long current_pages;
> > >   unsigned long target_pages;
> > > - /* We may hit the hard limit in Xen. If we do then we 
> > > remember it. */
> > > - unsigned long hard_limit;
> > >   /*
> > >    * Drivers may alter the memory reservation 
> > > independently, but they
> > >    * must inform the balloon driver so we avoid hitting 
> > > the hard limit.
> > > diff -r fd9c565657b8 drivers/xen/balloon/sysfs.c
> > > --- a/drivers/xen/balloon/sysfs.c Thu Jun 04 16:26:49 2009 +0100
> > > +++ b/drivers/xen/balloon/sysfs.c Fri Jun 05 11:56:22 2009 +0100
> > > @@ -53,9 +53,6 @@
> > >  BALLOON_SHOW(current_kb, "%lu\n", PAGES2KB(bs.current_pages));
> > >  BALLOON_SHOW(low_kb, "%lu\n", PAGES2KB(bs.balloon_low));
> > >  BALLOON_SHOW(high_kb, "%lu\n", PAGES2KB(bs.balloon_high));
> > > -BALLOON_SHOW(hard_limit_kb,
> > > -      (bs.hard_limit!=~0UL) ? "%lu\n" : "???\n",
> > > -      (bs.hard_limit!=~0UL) ? PAGES2KB(bs.hard_limit) : 0);
> > >  BALLOON_SHOW(driver_kb, "%lu\n", PAGES2KB(bs.driver_pages));
> > >  
> > >  static ssize_t show_target_kb(struct sys_device *dev, char *buf)
> > > @@ -96,7 +93,6 @@
> > >   &attr_current_kb.attr,
> > >   &attr_low_kb.attr,
> > >   &attr_high_kb.attr,
> > > - &attr_hard_limit_kb.attr,
> > >   &attr_driver_kb.attr,
> > >   NULL
> > >  };
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-devel
> > >
> 
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.