RE: [Xen-devel] Xen 3.4.1-rc8 iommu crash on Optiplex 760 ( Core2 E8400, Q43 / ICH10D )

[Boris Derzhavets <bderzhavets@xxxxxxxxx>]

Sorry, i cannot have VT-d enabled on this board.

B.

--- On Mon, 7/27/09, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:

From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
Subject: RE: [Xen-devel] Xen 3.4.1-rc8 iommu crash on Optiplex 760 ( Core2 E8400, Q43 / ICH10D )
To: "Michael Opyr" <opyrm@xxxxxxx>, "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>, "DexuanCui" <dexuan.cui@xxxxxxxxx>
Date: Monday, July 27, 2009, 5:55 AM

Attempt to activate ioemmu on C2D 8400 (ASUS P5K Premium WIFI), 8 GB RAM.

Grub entry :-

title Xen 3.4 / Ubuntu 9.04 kernel 2.6.30.2
uuid     b1b42e66-9f1d-4687-a111-ff1366ceebe5
kernel   /xen-3.4.gz
module   /vmlinuz-2.6.30.2 root=/dev/sdb2 ro console=tty0 iommu=passthrough iommu_inclusive_mapping=1
module   /initrd-2.6.30.2.img
 
Dmesg output (booting up OK):-

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30.2 (root@ServerJaunty) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #1 SMP Sat Jul 25 17:12:04 MSD 2009
[    0.000000] Command line: root=/dev/sdb2 ro console=tty0 iommu=passthrough iommu_inclusive_mapping=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Xen-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000001f2263000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x1f2263 max_arch_pfn = 0x80000000
[    0.000000] last_pfn = 0x100000 max_arch_pfn = 0x80000000
[    0.000000] init_memory_mapping: 0000000000000000-0000000100000000
[    0.000000]  0000000000 - 0100000000 page 4k
[    0.000000] kernel direct mapping tables up to 100000000 @ 97ee000-9ff3000
[    0.000000] init_memory_mapping: 0000000100000000-00000001f2263000
[    0.000000]  0100000000 - 01f2263000 page 4k
[    0.000000] kernel direct mapping tables up to 1f2263000 @ 9ff3000-af8e000
[    0.000000] RAMDISK: 00bad000 - 0979ba00
[    0.000000] ACPI: RSDP 00000000000fbb80 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT  10000730 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP  10000730 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cff805c0 08E13 (v01  A0840 A0840001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000cff8e000 00040
[    0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC  10000730 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG  10000730 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM  10000730 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cff893e0 00038 (v01 A_M_I_ OEMHPET  10000730 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000cff89420 000B0 (v01 A_M_I_ OEMOSFR  10000730 MSFT 00000097)
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 01f1a63000]
[    0.000000]   #0 [0000bad000 - 00097ee000]     Xen provided ==> [0000bad000 - 00097ee000]
[    0.000000]   #1 [0000200000 - 0000b8ca38]    TEXT DATA BSS ==> [0000200000 - 0000b8ca38]
[    0.000000]   #2 [0010000000 - 0010f91000]          INITP2M ==> [0010000000 - 0010f91000]
[    0.000000]   #3 [0000b8d000 - 0000b8d288]              BRK ==> [0000b8d000 - 0000b8d288]
[    0.000000]   #4 [00097ee000 - 0009ff3000]          PGTABLE ==> [00097ee000 - 0009ff3000]
[    0.000000]   #5 [0009ff3000 - 000a789000]          PGTABLE ==> [0009ff3000 - 000a789000]
[    0.000000] found SMP MP-table at [ffffffffff5fb780] 000ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x001f2263
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x001f1a63
[    0.000000]     0: 0x001f2263 -> 0x001f2263
[    0.000000] On node 0 totalpages: 2038371
[    0.000000] free_area_init_node: node 0, pgdat ffffffff80912940, node_mem_map ffff880010f91000
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4040 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 1030200 pages, LIFO batch:31
[    0.000000]   Normal zone: 13561 pages used for memmap
[    0.000000]   Normal zone: 976234 pages, LIFO batch:31
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocated 10 4k pages, static data 39904 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2010474
[    0.000000] Kernel command line: root=/dev/sdb2 ro console=tty0 iommu=passthrough iommu_inclusive_mapping=1
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:2624
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Xen reported: 3005.648 MHz processor.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console [tty0] enabled
[    0.010000] console [xvc-1] enabled
[    0.010000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010000] allocated 81616760 bytes of page_cgroup
[    0.010000] please try cgroup_disable=memory option if you don't want
[    0.010000] Software IO TLB enabled:
[    0.010000]  Aperture:     64 megabytes
[    0.010000]  Address size: 27 bits
[    0.010000]  Kernel range: ffff88001da2b000 - ffff880021a2b000
[    0.010000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.010000] Memory: 7697532k/8161676k available (4924k kernel code, 8192k absent, 455284k reserved, 2348k data, 352k init)
[    0.850001] Calibrating delay using timer specific routine.. 6012.73 BogoMIPS (lpj=30063654)
[    0.850166] Security Framework initialized
[    0.850229] SELinux:  Disabled at boot.
[    0.850302] Mount-cache hash table entries: 256
[    0.850457] Initializing cgroup subsys ns
[    0.850518] Initializing cgroup subsys cpuacct
[    0.850578] Initializing cgroup subsys memory
[    0.850643] Initializing cgroup subsys freezer
[    0.850721] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.850827] CPU: L2 cache: 6144K
[    0.850891] SMP alternatives: switching to UP code
[    0.873271] ACPI: Core revision 20090320
[    0.940350] SMP alternatives: switching to SMP code
[    0.962651] Brought up 2 CPUs
[    0.962650] Initializing CPU#1
[    0.962650] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.962650] CPU: L2 cache: 6144K
[    0.962889] CPU0 attaching sched-domain:
[    0.962890]  domain 0: span 0-1 level CPU
[    0.962892]   groups: 0 1
[    0.962895] CPU1 attaching sched-domain:
[    0.962896]  domain 0: span 0-1 level CPU
[    0.962898]   groups: 1 0
[    0.963936] net_namespace: 1888 bytes
[    0.964101] regulator: core version 0.5
[    0.964187] Time:  9:43:41  Date: 07/27/09
[    0.964291] NET: Registered protocol family 16
[    0.964480] ACPI: bus type pci registered
[    0.964592] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.964655] PCI: Not using MMCONFIG.
[    0.964714] PCI: Using configuration type 1 for base access
[    0.965272] bio: create slab <bio-0> at 0
[    0.965940] ACPI: EC: Look up EC in DSDT
[    0.973658] ACPI: Interpreter enabled
[    0.974398] ACPI: (supports S0 S1 S3 S5)
[    0.974651] ACPI: Using IOAPIC for interrupt routing
[    0.974753] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.976970] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.989873] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.996805] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 67, should be 5E [20090320]
[    0.997084] ACPI: No dock devices found.
[    0.997194] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.997402] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.997466] pci 0000:00:01.0: PME# disabled
[    0.997630] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
[    0.997731] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
[    0.997828] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f]
[    0.997930] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff]
[    0.998006] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.998073] pci 0000:00:1a.7: PME# disabled
[    0.998190] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[    0.998250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.998316] pci 0000:00:1b.0: PME# disabled
[    0.998459] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.998525] pci 0000:00:1c.0: PME# disabled
[    0.998674] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.998740] pci 0000:00:1c.4: PME# disabled
[    0.998885] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.998951] pci 0000:00:1c.5: PME# disabled
[    0.999087] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f]
[    0.999184] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
[    0.999282] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f]
[    0.999383] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff]
[    0.999458] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.999526] pci 0000:00:1d.7: PME# disabled
[    0.999750] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.999826] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.999890] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    1.000054] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07]
[    1.000061] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883]
[    1.000068] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807]
[    1.000075] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483]
[    1.000082] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x941f]
[    1.000089] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9ffe800-0xf9ffefff]
[    1.000135] pci 0000:00:1f.2: PME# supported from D3hot
[    1.000199] pci 0000:00:1f.2: PME# disabled
[    1.000297] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff]
[    1.000315] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    1.000383] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    1.000395] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[    1.000407] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[    1.000414] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
[    1.000421] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[    1.000510] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[    1.000514] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe8fffff]
[    1.000520] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    1.000585] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
[    1.000697] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff]
[    1.000708] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeaeffff]
[    1.000747] pci 0000:03:00.0: PME# supported from D3hot
[    1.000812] pci 0000:03:00.0: PME# disabled
[    1.000935] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
[    1.000945] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
[    1.000955] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
[    1.000965] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
[    1.000975] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[    1.001098] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[    1.001102] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    1.001183] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[    1.001192] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
[    1.001225] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
[    1.001277] pci 0000:02:00.0: supports D1 D2
[    1.001278] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.001343] pci 0000:02:00.0: PME# disabled
[    1.001461] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[    1.001466] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    1.001521] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
[    1.001584] pci 0000:05:03.0: supports D1 D2
[    1.001585] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    1.001650] pci 0000:05:03.0: PME# disabled
[    1.001752] pci 0000:05:04.0: reg 10 io port: [0xe800-0xe8ff]
[    1.001760] pci 0000:05:04.0: reg 14 32bit mmio: [0xfebfec00-0xfebfecff]
[    1.001794] pci 0000:05:04.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    1.001819] pci 0000:05:04.0: supports D1 D2
[    1.001820] pci 0000:05:04.0: PME# supported from D1 D2 D3hot D3cold
[    1.001884] pci 0000:05:04.0: PME# disabled
[    1.001998] pci 0000:00:1e.0: transparent bridge
[    1.002060] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    1.002065] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    1.002100] pci_bus 0000:00: on NUMA node 0
[    1.002104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.002185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    1.002226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.002293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    1.002336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    1.002380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    1.014702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.015441] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.016178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.016914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    1.017652] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.018494] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    1.019231] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    1.019967] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    1.020648] xen_mem: Initialising balloon driver.
[    1.020864] SCSI subsystem initialized
[    1.020991] libata version 3.00 loaded.
[    1.021044] usbcore: registered new interface driver usbfs
[    1.021117] usbcore: registered new interface driver hub
[    1.021202] usbcore: registered new device driver usb
[    1.021359] ACPI: WMI: Mapper loaded
[    1.021421] PCI: Using ACPI for IRQ routing
[    1.050007] Bluetooth: Core ver 2.15
[    1.050118] NET: Registered protocol family 31
[    1.050180] Bluetooth: HCI device and connection manager initialized
[    1.050244] Bluetooth: HCI socket layer initialized
[    1.050306] NET: Registered protocol family 8
[    1.050367] NET: Registered protocol family 20
[    1.050435] NetLabel: Initializing
[    1.050496] NetLabel:  domain hash size = 128
[    1.050557] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.050627] NetLabel:  unlabeled traffic allowed by default
[    1.080007] pnp: PnP ACPI init
[    1.080085] ACPI: bus type pnp registered
[    1.082810] pnp: PnP ACPI: found 15 devices
[    1.082873] ACPI: ACPI bus type pnp unregistered
[    1.082940] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    1.083009] system 00:07: ioport range 0x290-0x297 has been reserved
[    1.083072] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    1.083134] system 00:08: ioport range 0x800-0x87f has been reserved
[    1.083196] system 00:08: ioport range 0x480-0x4bf has been reserved
[    1.083257] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    1.083320] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    1.083382] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[    1.083444] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
[    1.083507] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    1.083569] system 00:08: iomem range 0xffe00000-0xffefffff has been reserved
[    1.083631] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
[    1.083695] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[    1.083758] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    1.083822] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    1.083887] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    1.083948] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[    1.084013] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    1.084077] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[    1.084330] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.084393] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
[    1.084457] pci 0000:00:01.0:   MEM window: 0xfa000000-0xfe8fffff
[    1.084520] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    1.084595] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[    1.084658] pci 0000:00:1c.0:   IO window: disabled
[    1.084723] pci 0000:00:1c.0:   MEM window: disabled
[    1.084788] pci 0000:00:1c.0:   PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[    1.084867] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[    1.084932] pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
[    1.084997] pci 0000:00:1c.4:   MEM window: 0xfea00000-0xfeafffff
[    1.085064] pci 0000:00:1c.4:   PREFETCH window: disabled
[    1.085132] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[    1.085197] pci 0000:00:1c.5:   IO window: 0xc000-0xcfff
[    1.085261] pci 0000:00:1c.5:   MEM window: 0xfe900000-0xfe9fffff
[    1.085327] pci 0000:00:1c.5:   PREFETCH window: disabled
[    1.085396] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    1.085460] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    1.085525] pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
[    1.085591] pci 0000:00:1e.0:   PREFETCH window: 0x000000f0000000-0x000000f00fffff
[    1.085681] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.085746] pci 0000:00:01.0: setting latency timer to 64
[    1.085756] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.085823] pci 0000:00:1c.0: setting latency timer to 64
[    1.085831] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.085896] pci 0000:00:1c.4: setting latency timer to 64
[    1.085903] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.085968] pci 0000:00:1c.5: setting latency timer to 64
[    1.085975] pci 0000:00:1e.0: setting latency timer to 64
[    1.085979] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.085980] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    1.085982] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    1.085984] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe8fffff]
[    1.085985] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    1.085987] pci_bus 0000:04: resource 2 pref mem [0xf8f00000-0xf8ffffff]
[    1.085989] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    1.085990] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[    1.085992] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    1.085993] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[    1.085995] pci_bus 0000:05: resource 0 io:  [0xe000-0xefff]
[    1.085997] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[    1.085998] pci_bus 0000:05: resource 2 pref mem [0xf0000000-0xf00fffff]
[    1.086000] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    1.086001] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[    1.086040] NET: Registered protocol family 2
[    1.180080] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.180777] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.182175] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.182599] TCP: Hash tables configured (established 262144 bind 65536)
[    1.182663] TCP reno registered
[    1.210099] NET: Registered protocol family 1
[    1.210211] Trying to unpack rootfs image as initramfs...
[    1.311295] Freeing initrd memory: 143290k freed
[    1.355138] audit: initializing netlink socket (disabled)
[    1.355222] type=2000 audit(1248687822.710:1): initialized
[    1.361041] VFS: Disk quotas dquot_6.5.2
[    1.361127] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.361423] fuse init (API version 7.11)
[    1.361511] msgmni has been set to 16204
[    1.361719] alg: No test for stdrng (krng)
[    1.361790] io scheduler noop registered
[    1.361852] io scheduler anticipatory registered
[    1.361914] io scheduler deadline registered (default)
[    1.361989] io scheduler cfq registered
[    1.362358] pci 0000:01:00.0: Boot video device
[    1.362565] pcieport-driver 0000:00:01.0: irq 2303 (255) for MSI/MSI-X
[    1.362582] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.362726] pcieport-driver 0000:00:1c.0: irq 2302 (254) for MSI/MSI-X
[    1.362743] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.362898] pcieport-driver 0000:00:1c.4: irq 2301 (253) for MSI/MSI-X
[    1.362915] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.363073] pcieport-driver 0000:00:1c.5: irq 2300 (252) for MSI/MSI-X
[    1.363091] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.363178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.363898] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.364054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.364125] ACPI: Power Button [PWRF]
[    1.364225] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.364297] ACPI: Power Button [PWRB]
[    1.364741] ACPI: SSDT 00000000cff8e0d0 001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    1.365233] processor ACPI_CPU:00: registered as cooling_device0
[    1.365496] ACPI: SSDT 00000000cff8e2b0 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    1.365976] processor ACPI_CPU:01: registered as cooling_device1
[    1.366238] processor ACPI_CPU:02: registered as cooling_device2
[    1.366497] processor ACPI_CPU:03: registered as cooling_device3
[    1.369380] Linux agpgart interface v0.103
[    1.369875] brd: module loaded
[    1.370178] loop: module loaded
[    1.370289] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.370398] Xen virtual console successfully installed as xvc0
[    1.370475] Event-channel device installed.
[    1.373816] blktap_device_init: blktap device major 252
[    1.373879] blktap_ring_init: blktap ring major: 252
[    1.376405] Driver 'sd' needs updating - please use bus_type methods
[    1.376475] Driver 'sr' needs updating - please use bus_type methods
[    1.376565] ahci 0000:00:1f.2: version 3.0
[    1.376581] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    1.376688] ahci 0000:00:1f.2: irq 2299 (251) for MSI/MSI-X
[    1.376727] ahci: SSS flag set, parallel bus scan disabled
[    1.376816] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.376888] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[    1.376963] ahci 0000:00:1f.2: setting latency timer to 64
[    1.382377] scsi0 : ahci
[    1.382500] scsi1 : ahci
[    1.382600] scsi2 : ahci
[    1.382701] scsi3 : ahci
[    1.382803] scsi4 : ahci
[    1.382904] scsi5 : ahci
[    1.383042] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 2299
[    1.383116] ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 2299
[    1.383868] ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 2299
[    1.383940] ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 2299
[    1.384011] ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 2299
[    1.384082] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 2299
[    1.384176] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.400113] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.400188] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.400255] ahci 0000:03:00.0: setting latency timer to 64
[    1.400434] scsi6 : ahci
[    1.400538] scsi7 : ahci
[    1.400640] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    1.400715] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    1.401033] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.401099] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.401196] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.401268] scsi8 : pata_jmicron
[    1.401393] scsi9 : pata_jmicron
[    1.401990] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    1.402053] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    1.402312] Fixed MDIO Bus: probed
[    1.402374] PPP generic driver version 2.4.2
[    1.402492] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.402572] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.402646] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.402649] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.402747] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.406742] ehci_hcd 0000:00:1a.7: debug port 1
[    1.406810] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.406822] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    1.430009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.430144] usb usb1: configuration #1 chosen from 1 choice
[    1.430225] hub 1-0:1.0: USB hub found
[    1.430294] hub 1-0:1.0: 6 ports detected
[    1.430431] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.430504] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.430507] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.430594] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.434581] ehci_hcd 0000:00:1d.7: debug port 1
[    1.434649] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.434661] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    1.450007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.450136] usb usb2: configuration #1 chosen from 1 choice
[    1.450213] hub 2-0:1.0: USB hub found
[    1.450281] hub 2-0:1.0: 6 ports detected
[    1.450399] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.450471] uhci_hcd: USB Universal Host Controller Interface driver
[    1.450552] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.450619] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.450622] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.450715] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.450811] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    1.450935] usb usb3: configuration #1 chosen from 1 choice
[    1.451013] hub 3-0:1.0: USB hub found
[    1.451079] hub 3-0:1.0: 2 ports detected
[    1.451200] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.451267] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.451270] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.451360] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.451463] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    1.451582] usb usb4: configuration #1 chosen from 1 choice
[    1.451660] hub 4-0:1.0: USB hub found
[    1.451726] hub 4-0:1.0: 2 ports detected
[    1.451840] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.451909] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.451912] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.452001] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.452096] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    1.452218] usb usb5: configuration #1 chosen from 1 choice
[    1.452297] hub 5-0:1.0: USB hub found
[    1.452362] hub 5-0:1.0: 2 ports detected
[    1.452480] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.452549] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.452552] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.452641] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.452735] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    1.452855] usb usb6: configuration #1 chosen from 1 choice
[    1.452933] hub 6-0:1.0: USB hub found
[    1.453000] hub 6-0:1.0: 2 ports detected
[    1.453121] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.453188] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.453191] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.453281] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.453383] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    1.453504] usb usb7: configuration #1 chosen from 1 choice
[    1.453584] hub 7-0:1.0: USB hub found
[    1.453650] hub 7-0:1.0: 2 ports detected
[    1.453768] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.453837] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.453840] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.453928] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.454022] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    1.454141] usb usb8: configuration #1 chosen from 1 choice
[    1.454220] hub 8-0:1.0: USB hub found
[    1.454286] hub 8-0:1.0: 2 ports detected
[    1.454428] usbcore: registered new interface driver libusual
[    1.454511] usbcore: registered new interface driver usbserial
[    1.454581] USB Serial support registered for generic
[    1.454649] usbcore: registered new interface driver usbserial_generic
[    1.454710] usbserial: USB Serial Driver core
[    1.454800] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.454861] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.455352] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.455453] mice: PS/2 mouse device common for all mice
[    1.455579] rtc_cmos 00:03: RTC can wake from S4
[    1.455660] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.455744] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    1.455843] device-mapper: uevent: version 1.0.3
[    1.455947] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    1.456083] device-mapper: multipath: version 1.0.5 loaded
[    1.456147] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.456495] TCP cubic registered
[    1.456599] NET: Registered protocol family 10
[    1.456925] lo: Disabled Privacy Extensions
[    1.457172] NET: Registered protocol family 17
[    1.457264] Bridge firewalling registered
[    1.457336] Bluetooth: L2CAP ver 2.13
[    1.457397] Bluetooth: L2CAP socket layer initialized
[    1.457460] Bluetooth: SCO (Voice Link) ver 0.6
[    1.457521] Bluetooth: SCO socket layer initialized
[    1.457605] Bluetooth: RFCOMM socket layer initialized
[    1.457671] Bluetooth: RFCOMM TTY layer initialized
[    1.457733] Bluetooth: RFCOMM ver 1.11
[    1.457850] registered taskstats version 1
[    1.457994] PCI IO multiplexer device installed.
[    1.458062]   Magic number: 1:672:728
[    1.458187] rtc_cmos 00:03: setting system clock to 2009-07-27 09:43:42 UTC (1248687822)
[    1.458260] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[    1.474448] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.590561] ata9.00: ATAPI: Optiarc DVD RW AD-5200A, 1.03, max UDMA/66
[    1.630582] ata9.00: configured for UDMA/66
[    1.750023] ata7: SATA link down (SStatus 0 SControl 300)
[    1.750114] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    1.760023] ata8: SATA link down (SStatus 0 SControl 300)
[    1.906463] usb 1-3: configuration #1 chosen from 1 choice
[    1.910032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.910649] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.910724] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.911476] ata1.00: configured for UDMA/133
[    1.930094] scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.930248] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.930266] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    1.930276] sd 0:0:0:0: [sda] Write Protect is off
[    1.930277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.930292] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.930350]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
[    2.050804] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.320010] usb 8-2: new low speed USB device using uhci_hcd and address 2
[    2.478159] usb 8-2: configuration #1 chosen from 1 choice
[    2.860034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.860648] ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    2.860719] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.861474] ata2.00: configured for UDMA/133
[    2.880069] scsi 1:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    2.880207] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.880209] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    2.880218] sd 1:0:0:0: [sdb] Write Protect is off
[    2.880220] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.880234] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.880284]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[    2.939818] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.230014] ata3: SATA link down (SStatus 0 SControl 300)
[    3.600013] ata4: SATA link down (SStatus 0 SControl 300)
[    3.970013] ata5: SATA link down (SStatus 0 SControl 300)
[    4.340012] ata6: SATA link down (SStatus 0 SControl 300)
[    4.361692] scsi 8:0:0:0: CD-ROM            Optiarc  DVD RW AD-5200A  1.03 PQ: 0 ANSI: 5
[    4.367386] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    4.367462] Uniform CD-ROM driver Revision: 3.20
[    4.367563] sr 8:0:0:0: Attached scsi CD-ROM sr0
[    4.367589] sr 8:0:0:0: Attached scsi generic sg2 type 5
[    4.532009] Freeing unused kernel memory: 352k freed
[    4.532178] Write protecting the kernel read-only data: 6820k
[    4.719276] Floppy drive(s): fd0 is 1.44M
[    4.719411] floppy0: Unable to grab DMA2 for the floppy driver
[    4.733965] FDC 0 is a post-1991 82077
[    4.746799] sky2 driver version 1.22
[    4.746904] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.746980] sky2 0000:02:00.0: setting latency timer to 64
[    4.747016] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[    4.747222] sky2 0000:02:00.0: irq 2298 (250) for MSI/MSI-X
[    4.747692] sky2 eth0: addr 00:1e:8c:25:d9:23
[    4.781780] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.781867] r8169 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.781961] r8169 0000:05:04.0: no PCI Express capability
[    4.782447] eth1: RTL8169sc/8110sc at 0xffffc2000002cc00, 00:1e:8c:25:cc:a5, XID 18000000 IRQ 16
[    4.792495] usbcore: registered new interface driver hiddev
[    4.801884] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.809373] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
[    4.809514] generic-usb 0003:062A:0001.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.2-2/input0
[    4.809602] usbcore: registered new interface driver usbhid
[    4.809668] usbhid: v2.6:USB HID core driver
[    4.868496] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febff000-febff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    6.200169] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00000473b7]
[    6.485632] EXT4-fs: barriers enabled
[    6.499521] kjournald2 starting: pid 961, dev sdb2:8, commit interval 5 seconds
[    6.499612] EXT4-fs: delayed allocation enabled
[    6.499672] EXT4-fs: file extents enabled
[    6.499850] EXT4-fs: mballoc enabled
[    6.499918] EXT4-fs: mounted filesystem sdb2 with ordered data mode
[    9.860331] udev: starting version 141
[   10.721244] sky2 eth0: enabling interface
[   10.721933] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.818858] iTCO_vendor_support: vendor-support=0
[   10.844816] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   10.844963] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[   10.845079] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.871683] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   10.900079] cfg80211: Calling CRDA to update world regulatory domain
[   11.014152] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   11.014341] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   11.051950] cfg80211: World regulatory domain updated:
[   11.052014]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.052086]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.052148]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.052210]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.052272]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.052334]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.075156] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   11.980638] phy0: Selected rate control algorithm 'minstrel'
[   11.981078] phy0: hwaddr 00:15:af:51:c2:c0, RTL8187vB (default) V1 + rtl8225z2
[   11.981174] usbcore: registered new interface driver rtl8187
[   12.425626] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.425771] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.924028] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[   13.062091] lp: driver loaded but no devices found
[   13.302798] EXT4 FS on sdb2, internal journal on sdb2:8
[   13.744123] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   13.744730] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   13.772691] kjournald starting.  Commit interval 5 seconds
[   13.772876] EXT3 FS on sdb1, internal journal
[   13.772881] EXT3-fs: mounted filesystem with writeback data mode.
[   13.890909] Adding 4095992k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:4095992k
[   13.894887] Adding 4091896k swap on /dev/mapper/vg_serverxen-LogVol01.  Priority:-2 extents:1 across:4091896k
[   13.917338] Adding 4095992k swap on /dev/mapper/vg_serverxen341-LogVol01.  Priority:-3 extents:1 across:4095992k
[   13.984307] Adding 1301224k swap on /dev/sda15.  Priority:-4 extents:1 across:1301224k
[   14.018759] Adding 3903784k swap on /dev/sdb3.  Priority:-5 extents:1 across:3903784k
[   17.075351] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.075353] Bluetooth: BNEP filters: protocol multicast
[   17.709348] ppdev: user-space parallel port driver
[   21.970405] r8169: eth1: link down
[   21.971050] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   23.980005] eth0: no IPv6 routers present
[   24.151458] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.630016] sky2 eth0: disabling interface
[   26.682590] sky2 peth0: enabling interface
[   26.683225] ADDRCONF(NETDEV_UP): peth0: link is not ready
[   28.365307] sky2 peth0: Link is up at 100 Mbps, full duplex, flow control both
[   28.365913] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[   28.745116] device peth0 entered promiscuous mode
[   28.803000] eth0: port 1(peth0) entering forwarding state
[   36.751355] suspend: event channel 28
[   38.794679] peth0: no IPv6 routers present
[   38.983993] eth0: no IPv6 routers present

--- On Mon, 7/27/09, Cui, Dexuan <dexuan.cui@xxxxxxxxx> wrote:

From: Cui, Dexuan <dexuan.cui@xxxxxxxxx>
Subject: RE: [Xen-devel] Xen 3.4.1-rc8 iommu crash on Optiplex 760 ( Core2 E8400, Q43 / ICH10D )
To: "Michael Opyr" <opyrm@xxxxxxx>, "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Date: Monday, July 27, 2009, 1:53 AM

Hi Michael,
After you change your BIOS's VT-d setting from Disabled to Enabled (or from Enabled to Disabled), can you try power cycle your host (unplug the power cord and wait for some time)?
If this works, it would be a BIOS issue.

 

Thanks,
-- Dexuan

---

From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Michael Opyr
Sent: 2009å7æ25æ 2:06
To: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-devel] Xen 3.4.1-rc8 iommu crash on Optiplex 760 ( Core2 E8400, Q43 / ICH10D )

Xen 3.4.1-rc8 iommu crash on Optiplex 760 ( Core2 E8400, Q43 / ICH10D )

Using the following build procedure from a clean amd64 debian lenny install

On an optiplex 760 with the latest bios (A03)

apt-get install ssh less bcc bin86 gawk bridge-utils iproute libcurl3 libcurl4-openssl-dev bzip2 module-init-tools transfig tgif texinfo pciutils-dev mercurial build-essential make gcc libc6-dev zlib1g-dev python python-dev python-twisted libncurses5-dev patch libvncserver-dev libsdl-dev libjpeg62-dev gcc-multilib git-core

hg clone http://xenbits.xensource.com/xen-3.4-testing.hg

cd xen-3.4-testing.hg

make world -j2 debug=y debugger=y

make install -j2 debug=y debugger=y

Xen boots without a problem if iommu is disabled but

if I enable iommu no matter the boot time parameters xen crashes as follows

__  __            _____ _  _    _             ___

 \ \/ /___ _ __   |___ /| || |  / |   _ __ ___( _ )

  \  // _ \ '_ \    |_ \| || |_ | |__| '__/ __/ _ \

  /  \  __/ | | |  ___) |__   _|| |__| | | (_| (_) |

 /_/\_\___|_| |_| |____(_) |_|(_)_|  |_|  \___\___/

(XEN) Xen version 3.4.1-rc8 (***@***) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Thu Jul 23 18:59:18 MDT 2009

(XEN) Latest ChangeSet: Thu Jul 23 09:08:13 2009 +0100 19702:0171f9316e25

(XEN) Command line: console=com1 com1=57600,8n1 iommu=passthrough iommu_inclusive_mapping=1

(XEN) Video information:

(XEN)  VGA is text mode 80x25, font 8x16

(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds

(XEN) Disc information:

(XEN)  Found 1 MBR signatures

(XEN)  Found 1 EDD information structures

(XEN) Xen-e820 RAM map:

(XEN)  0000000000000000 - 000000000009ec00 (usable)

(XEN)  00000000000f0000 - 0000000000100000 (reserved)

(XEN)  0000000000100000 - 00000000cfdffc00 (usable)

(XEN)  00000000cfdffc00 - 00000000cfe53c00 (ACPI NVS)

(XEN)  00000000cfe53c00 - 00000000cfe55c00 (ACPI data)

(XEN)  00000000cfe55c00 - 00000000d0000000 (reserved)

(XEN)  00000000e0000000 - 00000000f0000000 (reserved)

(XEN)  00000000fec00000 - 00000000fed00400 (reserved)

(XEN)  00000000fed20000 - 00000000feda0000 (reserved)

(XEN)  00000000fee00000 - 00000000fef00000 (reserved)

(XEN)  00000000ffb00000 - 0000000100000000 (reserved)

(XEN)  0000000100000000 - 0000000128000000 (usable)

(XEN) System RAM: 3965MB (4060788kB)

(XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL  )

(XEN) ACPI: XSDT 000FC7EF, 0074 (r1 DELL    B10K          15 ASL        61)

(XEN) ACPI: FACP 000FC91F, 00F4 (r3 DELL    B10K          15 ASL        61)

(XEN) ACPI: DSDT FFF1BE4D, 53BE (r1   DELL    dt_ex     1000 INTL 20050624)

(XEN) ACPI: FACS CFDFFC00, 0040

(XEN) ACPI: SSDT FFF2132A, 00AA (r1   DELL    st_ex     1000 INTL 20050624)

(XEN) ACPI: APIC 000FCA13, 0092 (r1 DELL    B10K          15 ASL        61)

(XEN) ACPI: BOOT 000FCAA5, 0028 (r1 DELL    B10K          15 ASL        61)

(XEN) ACPI: ASF! 000FCACD, 0096 (r32 DELL    B10K          15 ASL        61)

(XEN) ACPI: MCFG 000FCB63, 003E (r1 DELL    B10K          15 ASL        61)

(XEN) ACPI: HPET 000FCBA1, 0038 (r1 DELL    B10K          15 ASL        61)

(XEN) ACPI: TCPA 000FCDFD, 0032 (r1 DELL    B10K          15 ASL        61)

(XEN) ACPI: DMAR 000FCE2F, 00D8 (r1 DELL    B10K          15 ASL        61)

(XEN) ACPI: SLIC 000FCBD9, 0176 (r1 DELL    B10K          15 ASL        61)

(XEN) NUMA turned off

(XEN) Faking a node at 0000000000000000-0000000128000000

(XEN) Domain heap initialised

(XEN) found SMP MP-table at 000fe710

(XEN) DMI 2.5 present.

(XEN) Using APIC driver default

(XEN) ACPI: PM-Timer IO Port: 0x808

(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]

(XEN) ACPI:                  wakeup_vec[cfdffc0c], vec_size[20]

(XEN) ACPI: Local APIC address 0xfee00000

(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

(XEN) Processor #0 7:7 APIC version 20

(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

(XEN) Processor #1 7:7 APIC version 20

(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)

(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)

(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)

(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)

(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)

(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)

(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])

(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])

(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

(XEN) ACPI: IRQ0 used by override.

(XEN) ACPI: IRQ2 used by override.

(XEN) ACPI: IRQ9 used by override.

(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs

(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000

(XEN) [VT-D]dmar.c:485: Host address width 36

(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD

(XEN) [VT-D]dmar.c:349: dmaru->address = fedc1000

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1b.0

(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD

(XEN) [VT-D]dmar.c:349: dmaru->address = fedc3000

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.0

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.2

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.3

(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD

(XEN) [VT-D]dmar.c:349: dmaru->address = fedc4000

(XEN) [VT-D]dmar.c:358: found INCLUDE_ALL

(XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.0

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.1

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.2

(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.7

(XEN) Intel VT-d DMAR tables have been parsed.

(XEN) Using ACPI (MADT) for SMP configuration information

(XEN) Using scheduler: SMP Credit Scheduler (credit)

(XEN) Initializing CPU#0

(XEN) Detected 2992.547 MHz processor.

(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K

(XEN) CPU: L2 cache: 6144K

(XEN) CPU: Physical Processor ID: 0

(XEN) CPU: Processor Core ID: 0

(XEN) VMX: Supported advanced features:

(XEN)  - APIC MMIO access virtualisation

(XEN)  - APIC TPR shadow

(XEN)  - Virtual NMI

(XEN)  - MSR direct-access bitmap

(XEN) HVM: VMX enabled

(XEN) Intel machine check reporting enabled on CPU#0.

(XEN) CPU0: Thermal monitoring enabled (TM2)

(XEN) CMCI: CPU0 has no CMCI support

(XEN) CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a

(XEN) Booting processor 1/1 eip 8c000

(XEN) Initializing CPU#1

(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K

(XEN) CPU: L2 cache: 6144K

(XEN) CPU: Physical Processor ID: 0

(XEN) CPU: Processor Core ID: 1

(XEN) Intel machine check reporting enabled on CPU#1.

(XEN) CPU1: Thermal monitoring enabled (TM2)

(XEN) CMCI: CPU1 has no CMCI support

(XEN) CPU1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a

(XEN) Total of 2 processors activated.

(XEN) ENABLING IO-APIC IRQs

(XEN)  -> Using new ACK method

(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1

(XEN) checking TSC synchronization across 2 CPUs: passed.

(XEN) Platform timer is 14.318MHz HPET

(XEN) Brought up 2 CPUs

(XEN) microcode.c:73:d32767 microcode: CPU1 resumed

(XEN) Intel VT-d Snoop Control supported.

(XEN) Intel VT-d DMA Passthrough supported.

(XEN) Intel VT-d Queued Invalidation supported.

(XEN) Intel VT-d Interrupt Remapping supported.

(XEN) ----[ Xen-3.4.1-rc8  x86_64  debug=y  Not tainted ]----

(XEN) CPU:    0

(XEN) RIP:    e008:[<ffff828c8012db81>] clear_fault_bits+0x2d/0xb3

(XEN) RFLAGS: 0000000000010202   CONTEXT: hypervisor

(XEN) rax: ffff828bfff5aff8   rbx: 0000000000004090   rcx: 0000000000000001

(XEN) rdx: 00000000ffffffff   rsi: 0000000000000286   rdi: ffff830127fc80a0

(XEN) rbp: ffff828c80267db8   rsp: ffff828c80267db8   r8:  ffff828bfff57000

(XEN) r9:  ffff828bfff5700c   r10: ffff828bfff57008   r11: 0000000000000020

(XEN) r12: ffff830127fc80a0   r13: 0000000000000090   r14: ffff830127fc80e0

(XEN) r15: ffff830127ff1540   cr0: 000000008005003b   cr4: 00000000000026f0

(XEN) cr3: 00000000cfa6c000   cr2: ffff828bfff5aff8

(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: 0000   cs: e008

(XEN) Xen stack trace from rsp=ffff828c80267db8:

(XEN)    ffff828c80267df8 ffff828c8012e6f2 ffff828c80267df8 0000000000000002

(XEN)    ffff830127fc8240 ffff828c80216e90 ffff828c80267e18 ffff828c80216ec0

(XEN)    ffff828c80267e48 ffff828c8012effc ffff828c80267e38 ffff828c8012a456

(XEN)    000000000000001f 00000000ffffffed ffff828c80239e10 0000000000000001

(XEN)    ffff828c80218a60 ffff828c80218960 ffff828c80267e68 ffff828c8012bb55

(XEN)    ffff828c80267e68 ffff828c80239cf8 ffff828c80267f18 ffff828c8022d87c

(XEN)    0000000000000000 0000000000000000 000000000008bf40 0000000000000000

(XEN)    0000000000000000 ffff83000008bfc0 ffff83000008bf40 000000000163d108

(XEN)    0000000000000000 ffffffff00000000 0000000800000000 000000010000006e

(XEN)    0000000000000003 00000000000002f8 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000067e9c ffff828c801000b5 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    ffff8300ce1c0000

(XEN) Xen call trace:

(XEN)    [<ffff828c8012db81>] clear_fault_bits+0x2d/0xb3

(XEN)    [<ffff828c8012e6f2>] init_vtd_hw+0x2d7/0x3e9

(XEN)    [<ffff828c8012effc>] intel_vtd_setup+0x51e/0x638

(XEN)    [<ffff828c8012bb55>] iommu_setup+0x38/0xfd

(XEN)    [<ffff828c8022d87c>] __start_xen+0x2456/0x273a

(XEN)

(XEN) Pagetable walk from ffff828bfff5aff8:

(XEN)  L4[0x105] = 00000000cfa72027 5555555555555555

(XEN)  L3[0x02f] = 0000000127ffa063 5555555555555555

(XEN)  L2[0x1ff] = 0000000127ff9063 5555555555555555

(XEN)  L1[0x15a] = 0000000000000000 ffffffffffffffff

(XEN)

(XEN) ****************************************

(XEN) Panic on CPU 0:

(XEN) FATAL PAGE FAULT

(XEN) [error_code=0000]

(XEN) Faulting linear address: ffff828bfff5aff8

(XEN) ****************************************

(XEN)

(XEN) Reboot in five seconds...

Various google searches yielded a similar seeming issue previously posted

http://www.nabble.com/Re:-Problem:-Xen-3.4-fails-to-boot-on-Dell-e6400,-with--iommu%3D1-p24250643.html

from the posts I attempted the described patches,

the first (print clear fault bits) yields the following change

(XEN) Intel VT-d Snoop Control supported.

(XEN) Intel VT-d DMA Passthrough supported.

(XEN) Intel VT-d Queued Invalidation supported.

(XEN) Intel VT-d Interrupt Remapping supported.

(XEN) clear_fault_bits: CAP_REG=0xffffffffffffffff

(XEN) ----[ Xen-3.4.1-rc8  x86_64  debug=y  Not tainted ]----

(XEN) CPU:    0

(XEN) RIP:    e008:[<ffff828c8012f000>] clear_fault_bits+0x5f/0xea

(XEN) RFLAGS: 0000000000010202   CONTEXT: hypervisor

(XEN) rax: ffff828bfff5aff8   rbx: ffff830127ff1e90   rcx: 0000000000000000

(XEN) rdx: 00000000ffffffff   rsi: 000000000000000a   rdi: ffff828bfff57000

(XEN) rbp: ffff828c80267db8   rsp: ffff828c80267da8   r8:  ffff828bfff5700c

(XEN) r9:  ffff828bfff57008   r10: 00000000ffffffed   r11: 0000000000000010

(XEN) r12: ffff830127ff1e90   r13: 0000000000000090   r14: ffff830127ff1ed0

(XEN) r15: ffff830127ff1540   cr0: 000000008005003b   cr4: 00000000000026f0

(XEN) cr3: 00000000cfa6c000   cr2: ffff828bfff5aff8

(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: 0000   cs: e008

(XEN) Xen stack trace from rsp=ffff828c80267da8:

(XEN)    ffff830127ff1e90 0000000000004090 ffff828c80267df8 ffff828c8012fa2a

(XEN)    ffff828c80267df8 0000000000000002 ffff830127fe0070 ffff828c8021c690

(XEN)    ffff828c80267e18 ffff828c8021c6c0 ffff828c80267e48 ffff828c80130334

(XEN)    ffff828c80267e38 ffff828c8012b756 000000000000001f 00000000ffffffed

(XEN)    ffff828c8023ee30 0000000000002000 ffff828c8021e260 ffff828c8021e160

(XEN)    ffff828c80267e68 ffff828c8012ce55 ffff828c80267e68 ffff828c8023ed18

(XEN)    ffff828c80267f18 ffff828c802328ac 0000000000000000 0000000000000000

(XEN)    000000000008bf10 0000000000000000 0000000000000000 ffff83000008bfc0

(XEN)    ffff83000008bf10 000000000169eb28 0000000000000000 ffffffff00000000

(XEN)    0000000800000000 000000010000006e 0000000000000003 00000000000002f8

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000067e9c ffff828c801000b5

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000

(XEN)    0000000000000000 0000000000000000 ffff8300cf8fc000

(XEN) Xen call trace:

(XEN)    [<ffff828c8012f000>] clear_fault_bits+0x5f/0xea

(XEN)    [<ffff828c8012fa2a>] init_vtd_hw+0x2d7/0x3e9

(XEN)    [<ffff828c80130334>] intel_vtd_setup+0x51e/0x638

(XEN)    [<ffff828c8012ce55>] iommu_setup+0x38/0xfd

(XEN)    [<ffff828c802328ac>] __start_xen+0x2456/0x273a

(XEN)

(XEN) Pagetable walk from ffff828bfff5aff8:

(XEN)  L4[0x105] = 00000000cfa72027 5555555555555555

(XEN)  L3[0x02f] = 0000000127ffa063 5555555555555555

(XEN)  L2[0x1ff] = 0000000127ff9063 5555555555555555

(XEN)  L1[0x15a] = 0000000000000000 ffffffffffffffff

(XEN)

(XEN) ****************************************

(XEN) Panic on CPU 0:

(XEN) FATAL PAGE FAULT

(XEN) [error_code=0000]

(XEN) Faulting linear address: ffff828bfff5aff8

(XEN) ****************************************

(XEN)

(XEN) Reboot in five seconds...

And the second patch from the post (do not clear fault bits)

Gets us the following

(XEN) Intel VT-d Interrupt Remapping supported.

(XEN) DMAR_IQA_REG = ffffffffffffffff

(XEN) DMAR_IQH_REG = ffffffffffffffff

(XEN) DMAR_IQT_REG = ffffffffffffffff

(XEN)

(XEN) ****************************************

(XEN) Panic on CPU 0:

(XEN) queue invalidate wait descriptor was not executed

(XEN) ****************************************

(XEN)

(XEN) Reboot in five seconds...

Any ideas would be wonderfull as I would like to use passthrough with a windows hvm

Thank you

--Mike

-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel