| All what i do on F11:-
 # yum install vncserver
 
 Then put in /etc/rc.local
 
 export HOME=/root
 vncserver :1 -geometry 1280x1024 -depth 16
 
 Reboot Xen Host and connect remotely via vncviewer  , using local
  X-server and GDM on Xen Host. KDM fails to with Xen.
 
 There was one feed from Ian Campbell regarding Nvidia support by pvops
  kernel,
 followed by Jeremy Fitzhardinge notice. :(
 
 Do you remember that ?
 
 Boris.
 P.S. GeForce 8500 GT installed on my box.
 --- On Sat, 8/22/09, Mr. Teo En Ming (Zhang
  Enming) < enming.teo@xxxxxxxxxxxxxxx >
  wrote:
 From: Mr. Teo En Ming (Zhang Enming) < enming.teo@xxxxxxxxxxxxxxx >
 Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card
  drivers for Xen paravirt-operations domain 0 kernel
 To: enming.teo@xxxxxxxxxxxxxxx
 Cc: bderzhavets@xxxxxxxxx ,
  xen-devel@xxxxxxxxxxxxxxxxxxx
 Date: Saturday, August 22, 2009, 8:57 AM
 
  I might give Driver
  "intel" a try in xorg.conf.. Let me reboot to Intel GMA4500 first. -- 
 Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
 
 Technical Support Engineer
 
 Information Technology Department
 
 Asiasoft Online Pte Ltd
 
 Tampines Central 1 #04-01 Tampines Plaza
 
 Singapore 529541
 
 Republic of
 Singapore
 
 Mobile : +65-9648-9798
 
 MSN: teoenming@xxxxxxxxxxx
 
 Alma Maters: Singapore Polytechnic,
 National University of
 Singapore
 
 On 08/22/2009 08:53 PM, Mr. Teo En Ming (Zhang Enming) wrote:
 Dear Boris,
 Could you get X.org X server to work with Xen pv-ops dom 0 kernels 2.6..30-rc3
  and 2.6.31-rc6 under Fedora 11 64-bit?
 
 There is no nouveau driver for jeremy's dom 0 kernel. And when I tried to
  compiled nouveau against Jeremy's kernel, it would not work.
 
 Although I could compile and install official nvidia drivers against Jeremy's
  kernel, X server will hang and freeze.
 
 So I tried to use driver "nv" and "vesa" for X server
  when I booted Jeremy's kernel. But X still would not work and give me a
  backtrace.
 
 All this is when I am using NVIDIA Geforce 8400 GS PCI Express x16.
 
 If I switch over to using onboard integrated graphics Intel GMA 4500, is it
  supported under Jeremy Fitzhardinge's pvops dom 0 kernel? What driver can I
  use in xorg.conf?
 
 Thank you.
 -- 
 Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
 
 Technical Support Engineer
 
 Information Technology Department
 
 Asiasoft Online Pte Ltd
 
 Tampines Central 1 #04-01 Tampines Plaza
 
 Singapore 529541
 
 Republic of
 Singapore
 
 Mobile : +65-9648-9798
 
 MSN: teoenming@xxxxxxxxxxx
 
 Alma Maters: Singapore Polytechnic,
 National University of
 Singapore
 
 On 08/22/2009 08:44 PM, Boris Derzhavets wrote:
 
   
    | > Do I need to request nouveau and tungsten
    developers to make ttm and nouveau > code Xen pvops dom 0 aware?
 
 Why would you expect them to take care of Xen pvops ?
 
 
 Boris.
 
 --- On Sat, 8/22/09, Mr. Teo En Ming
    (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx>
    wrote:
 From: Mr. Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx>
 Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card
    drivers for Xen paravirt-operations domain 0 kernel
 To: enming.teo@xxxxxxxxxxxxxxx
 Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
 Date: Saturday, August 22, 2009, 8:31 AM
 
    Dear Pasi,
 I have compiled ttm and nouveau successfully against the stock/vanilla
    2.6.31-rc6 kernel WITHOUT Xen paravirt-ops Domain 0 patch.
 
 So it seems that nouveau could not be compiled against Xen pv-ops dom 0
    kernel and could not work with it.
 
 Do I need to request nouveau and tungsten developers to make ttm and
    nouveau code Xen pvops dom 0 aware?
 
 -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
    BEng(Hons)(Mechanical Engineering)
 Technical Support Engineer
 Information Technology Department
 Asiasoft Online Pte Ltd
 Tampines Central 1 #04-01 Tampines 
     Plaza
 Singapore 
    529541
 Republic of
 Singapore
 Mobile :
    +65-9648-9798
 MSN: teoenming@xxxxxxxxxxx
 Alma Maters: Singapore 
    Polytechnic, National
 University of
 Singapore
 
 
 
 On 08/22/2009 07:43 PM, Mr. Teo En Ming (Zhang Enming) wrote:
 > Dear Pasi,
 >
 > I am now trying to compile ttm and nouveau against stock vanilla
    2.6.31-rc6 kernel with-out dom 0 patch.
 >
 
 
 
 
 _______________________________________________
 Xen-devel mailing list
 Xen-devel@xxxxxxxxxxxxxxxxxxx
 http://lists.xensource.com/xen-devel
 |        
 
 
 
 _______________________________________________
 
 Xen-devel mailing list
 
 Xen-devel@xxxxxxxxxxxxxxxxxxx
 
 http://lists.xensource.com/xen-devel
 
 
    |