[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Latest unstable detects cpu speed incorrectly



Hi,

And the same time Domain-0 dmesg started to flood constantly this:

Attempting to checksum a non-TCP/UDP packet, dropping a protocol 1 packet
Attempting to checksum a non-TCP/UDP packet, dropping a protocol 1 packet

- Valtteri Kiviniemi

Valtteri Kiviniemi kirjoitti:
Hi,

I'll take that back, now its occuring in every virtual.

xentop shows this:

xentop - 18:13:15   Xen 3.5-unstable
6 domains: 4 running, 0 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown
Mem: 16758480k total, 4884612k used, 11873868k free    CPUs: 8 @ 2493MHz
NAME STATE CPU(sec) CPU(%) MEM(k) MEM(%) MAXMEM(k) MAXMEM(%) VCPUS NETS NETTX(k) NETRX(k) VBDS VBD_OO VBD_RD VBD_WR SSID cvx -----r 1239 318.2 1048576 6.3 1048576 6.3 8 1 4882 2706 2 0 9308 5191 0 db ------ 33 27.6 524288 3.1 524288 3.1 8 1 1307 920 2 0 7170 518 0 Domain-0 -----r 2531 4.7 520448 3.1 no limit n/a 8 0 0 0 0 0 0 0 0 game -----r 1407 338.8 1048576 6.3 1048576 6.3 8 1 1013 1002 2 0 3770 630 0 gj ------ 375 48.0 524288 3.1 524288 3.1 8 1 0 0 2 0 0 0 0 markka -----r 14565 62.8 1048576 6.3 1048576 6.3 8 1 42202 39013 2 0 132016 122133 0


- Valtteri Kiviniemi

Valtteri Kiviniemi kirjoitti:
Hi,

I have to wait for that to occur again. There were no error messages, suddenly domU's with emulated TSC started to use a lot of CPU until they were so slow that they had to be destroyed. domU's with native tsc are working fine.

Is there any way to track down the problem?

- Valtteri Kiviniemi

Keir Fraser kirjoitti:
Haven't heard any other reports of that. Can you provide more details?

 -- Keir

On 27/10/2009 15:51, "Valtteri Kiviniemi" <valtteri.kiviniemi@xxxxxxxxxxxx>
wrote:

Hi,

Seems like that emulation is not quite working as it should be. domU's
are using all the available cpu and then they crash. I did a fallback
back to the old behaviour and the virtuals running with tsc_native=1 are
working fine.

- Valtteri Kiviniemi

Valtteri Kiviniemi kirjoitti:
Hi,

Ok, good to know. Is it always at 1GHz or can it be adjusted? Is there
some other new features different from 3.4.1 that I should know?


- Valtteri Kiviniemi

Keir Fraser kirjoitti:
On 27/10/2009 15:22, "Valtteri Kiviniemi"
<valtteri.kiviniemi@xxxxxxxxxxxx>
wrote:

We are testing the latest xen-unstable and found an interesting bug.
dom0 detects cpu speed correctly but when booting domU it detects it
incorrectly:

"Detected 1000.000 MHz processor."
TSC is emulated at that speed. If you want old behaviour then add
tsc_native=1
to your domain config file.

 -- Keir



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel





_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.