[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Latest Pv_ops dom0 fails to boot



On 10/28/09 18:14, Zhang, Xiantao wrote:
> Jeremy Fitzhardinge wrote:
>   
>> On 10/27/09 20:03, Zhang, Xiantao wrote:
>>     
>>> Seems it is caused by newly-introduced
>>> hypercall(VCPUOP_register_vcpu_time_memory_area) for setting memory
>>> area for vcpu time.  Try the following patch(Just disable
>>> Xen_TIM_VSYSCALL) to have a try.   
>>>
>>>       
>> Are you saying that if that hypercall hasn't been implemented it
>> crashes?  Hm, will double-check.  It's certainly supposed to just
>> fall back. 
>>     
> No. If hypervisor doesn't support the hypercall, it just return -ENOSYS, and 
> dom0 can work well. But after implementing the hypercall in the 
> hypervisor(Cset#20339), both dom0 and hypervisor all performs correpsonding 
> actions in this case, so issues happen. That is to say, if disable this 
> hypercall either in hypervisor or in dom0, it should work, but if enable 
> both, the issue occurs. So it should be caused by incorrect hypercall 
> implementation 
>   

It's hard to see how any bug in either the Xen or kernel code relating
to that could cause the symptoms you're reporting, at least directly. 
Could you post the full output of the kernel boot?

What is the host hardware?

Thanks,
    J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.