Hi All,
I have just installed Slackware64 13.0 64-bit
Linux as HVM domU. Please refer to
http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/
for more details and screenshots.
I have tried to passthrough the
firewire controller on Intel DQ45CB motherboard to Slackware64 13.0 HVM domU
but I can't load the kernel modules for it.
Please have a look at the
following output within Slackware64 13.0 HVM domU.
00:05.0 FireWire
(IEEE 1394): Agere Systems FW322/323 (rev 70) (prog-if 10
[OHCI])
Subsystem: Intel Corporation Device
1003
Flags: bus master, medium devsel, latency 128,
IRQ 36
Memory at e3001000 (32-bit, non-prefetchable)
[size=4K]
Memory at e3002000 (32-bit,
non-prefetchable) [size=4K]
Capabilities: [44] Power
Management version 2
Kernel driver in use:
ohci1394
Kernel modules:
ohci1394
root@slackware64-13:~# lsmod | egrep
"(ohci|1394)"
root@slackware64-13:~# cd /lib/modules/
2.6.29.6/kernel/drivers/ieee1394/root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# ls
dv1394.ko
eth1394.ko ieee1394.ko ohci1394.ko pcilynx.ko
raw1394.ko sbp2.ko
video1394.ko
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# modinfo ohci1394.ko
filename:
ohci1394.ko
license:
GPL
description: Driver for PCI OHCI IEEE-1394
controllers
author:
Sebastien Rougeaux <
sebastien.rougeaux@xxxxxxxxxx>
alias:
pci:v*d*sv*sd*bc0Csc00i10*
depends:
ieee1394
vermagic: 2.6.29.6 SMP
mod_unload
parm:
phys_dma:Enable physical DMA (default = 1).
(int)
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# modinfo ieee1394.ko
filename:
ieee1394.ko
license:
GPL
depends:
vermagic: 2.6.29.6 SMP mod_unload
parm:
ignore_drivers:Disable automatic probing for drivers.
(int)
parm:
fcp:Map FCP registers (default = 1, disable = 0).
(int)
parm:
disable_nodemgr:Disable nodemgr functionality.
(int)
parm:
disable_irm:Disable Isochronous Resource Manager functionality.
(bool)
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# modprobe
ieee1394
FATAL: Error inserting ieee1394
(/lib/modules/
2.6.29.6/kernel/drivers/ieee1394/ieee1394.ko): Invalid
argument
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# modprobe
ohci1394
FATAL: Error inserting ohci1394
(/lib/modules/
2.6.29.6/kernel/drivers/ieee1394/ohci1394.ko): Invalid
argument
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# dmesg | grep -i
firewire
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# dmesg | grep -i
ieee
ieee1394: module is already loaded
ieee1394: module is already
loaded
ieee1394: module is already loaded
ieee1394: module is already
loaded
ieee1394: module is already loaded
ieee1394: module is already
loaded
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# lsmod | grep
ieee1394
root@slackware64-13:/lib/modules/
2.6.29.6/kernel/drivers/ieee1394# dmesg | grep
1394
ohci1394 0000:00:05.0: PCI INT A -> GSI 36 (level, low) -> IRQ
36
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[36]
MMIO=[e3001000-e30017ff] Max Packet=[2048] IR/IT
contexts=[8/8]
ieee1394: module is already loaded
ohci1394: module is
already loaded
ieee1394: module is already loaded
ohci1394: module is
already loaded
ieee1394: module is already loaded
ieee1394: module is
already loaded
ieee1394: module is already loaded
ieee1394: module is
already loaded
ohci1394: module is already loaded
Debug messages
in Dom0:
domid: 3
qemu: the number of cpus is 2
config qemu
network with xen bridge for tap3.0 eth0
Watching
/local/domain/0/device-model/3/logdirty/next-active
Watching
/local/domain/0/device-model/3/command
qemu_map_cache_init nr_buckets =
10000 size 4194304
shared page at pfn feffd
buffered io page at pfn
feffb
Guest uuid = 9a35fdea-fa74-6fec-e0f2-a852836d9a22
Time offset
set 0
cirrus_vga_enabled
populating video RAM at ff000000
mapping
video RAM from ff000000
Register xen platform.
Done register
platform.
xs_read(/vm/9a35fdea-fa74-6fec-e0f2-a852836d9a22/log-throttling):
read error
platform_fixed_ioport: changed ro/rw state of ROM memory area.
now is rw
state.
xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt):
read error
xs_read(): vncpasswd get error.
/vm/9a35fdea-fa74-6fec-e0f2-a852836d9a22/vncpasswd.
medium change watch
on `hdc' (index: 1): /media/hitachi/slackware64-13.0-install-dvd.iso
I/O
request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O
request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size:
0
dm-command: hot insert pass-through pci dev
register_real_device:
Assigning real physical device 02:01.0 ...
pt_iomul_init: Error:
pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory:
0x2:0x1.0x0
pt_register_regions: IO region registered (size=0x00001000
base_addr=0xd3801000)
pt_register_regions: IO region registered
(size=0x00000100 base_addr=0xd3800000)
register_real_device: Error:
Binding of interrupt failed! rc=-1
register_real_device: Real physical
device 02:01.0 registered successfuly!
IRQ type = INTx
cirrus vga map
change while on lfb mode
pt_iomem_map: e_phys=e3001000 maddr=d3801000
type=0 len=4096 index=0 first_map=1
pt_iomem_map: e_phys=e3002000
maddr=d3800000 type=0 len=4096 index=1 first_map=1
mapping vram to
e0000000 - e0400000
platform_fixed_ioport: changed ro/rw state of ROM
memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state
of ROM memory area. now is ro state.
pt_pci_write_config: Warning: Guest
attempt to set address to unused Base Address Register.
[00:05.0][Offset:30h][Length:4]The line immediately
above looks very suspicious.
--
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics) BEng(Hons)(Mechanical Engineering)
Alma Maters:
(1)
Singapore Polytechnic
(2) National University of Singapore
My Primary
Blog:
http://teo-en-ming-aka-zhang-enming.blogspot.comMy
Secondary Blog:
http://enmingteo.wordpress.comMy Youtube videos:
http://www.youtube.com/user/enmingteoEmail:
space.time.universe@xxxxxxxxxMSN:
teoenming@xxxxxxxxxxxMobile Phone (SingTel):
+65-9648-9798
Mobile Phone (Starhub Prepaid): +65-8369-2618
Age: 31
(as at 30 Oct 2009)
Height: 1.78 meters
Race: Chinese
Dialect:
Hokkien
Street: Bedok Reservoir Road
Country: Singapore
On Sat, Oct 24, 2009 at 2:19 AM, Mr. Teo En Ming
(Zhang Enming)
<space.time.universe@xxxxxxxxx> wrote:
From
the screenshots of the device manager in the Win XP Home domU,
the OHCI
IEEE 1394 firewire controller appears to be working properly.
The
Windows drivers for the firewire controller reports that the
firewire
controller is working fine.
However, when you connect a
firewire-based digital video camera to the
firewire port, it is not
detected in the Windows virtual machine.
I will probably have to
find time to install a Linux HVM domU and try
to pass through the 1394
controller to it.
On Sat, Oct 24, 2009 at 1:57 AM, Konrad
Rzeszutek Wilk
> On Sat, Oct 24, 2009 at 01:47:31AM +0800, Mr. Teo En Ming (Zhang
Enming) wrote:
>> Hi,
>>
>> Could you help me
look at here
>>
http://lists.xensource.com/archives/html/xen-devel/2009-10/msg01149.html>>
and also here
http://lists.xensource.com/archives/html/xen-devel/2009-10/msg01134.html>
>
Its looks to be working from the Dom0 side just fine. I am curious as what
is happening
> on the Windows driver side. I don't know enough about
where Windows drivers put
> debug information so I can't suggest
where to look there. One suggestion is that
> you install Fedora
Core 11 as a HVM guest and passthrough your firewire controller to
it.
> And then include the logs from the Fedora domU - that should
give more insight on why
> it is not working
properly.
>
