|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Problems booting latest xen pv-ops linux kernel
I occasionally have the same problem (same messages spit out by the kernel on boot. System keeps running, but everything is terribly slow it seems (these messages appear one by one with sometimes several seconds in between) In the end it can not mount the root filesystem and bails out. Serial console output of the hypervisor appended. -- Sander Friday, November 20, 2009, 2:41:11 AM, you wrote: > Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> writes: >>> No serial port on my laptop I'm afraid. I'm left with taking >>> screenshots with a camera. >> >> netconsole could fix that. Are the screenshots somewhere accessible? > For the future is there an howto to set this up for the hypervisor? Or > is that just the normal linux netconsole? > xen: > http://mrvn.homeip.net/13-11-09_190311.jpg > bare: > http://mrvn.homeip.net/bare.txt > http:///mrvn.homeip.net/interrupts.txt > The problem seems to be that under xen the interrupts (APIC-edge) for > sata_sil, eth0 and more are being shared (no screenshot of > /proc/interrupts, sorry) while they never should be. The network > driver doesn't work either (so no netconsole for this) and loading > only sata_sil as module doesn't help. Something screws up the > interrupt config. > MfG > Goswin __ __ _____ ____ _ _ _ \ \/ /___ _ __ |___ / | ___| _ _ _ __ ___| |_ __ _| |__ | | ___ \ // _ \ '_ \ |_ \ |___ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ / \ __/ | | | ___) | ___) |__| |_| | | | \__ \ || (_| | |_) | | __/ /_/\_\___|_| |_| |____(_)____/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| (XEN) Xen version 3.5-unstable (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) T hu Nov 19 08:37:49 CET 2009 (XEN) Latest ChangeSet: Sat Nov 14 10:32:59 2009 +0000 20453:bec27eb6f72c (XEN) Command line: loglvl=all loglvl_guest=all dom0_mem=512M com1=115200,8n1 co nsole=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) EDID info not retrieved because of reasons unknown (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007ee70000 (usable) (XEN) 000000007ee70000 - 000000007ee7e000 (ACPI data) (XEN) 000000007ee7e000 - 000000007eed0000 (ACPI NVS) (XEN) 000000007eed0000 - 000000007ef00000 (reserved) (XEN) 00000000fed00000 - 00000000fed01100 (reserved) (XEN) 00000000fed02000 - 00000000fed14c00 (reserved) (XEN) 00000000fed20000 - 00000000fed40000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) System RAM: 2000MB (2048816kB) (XEN) ACPI: RSDP 000FB080, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT 7EE70100, 005C (r1 A_M_I_ OEMXSDT 5000927 MSFT 97) (XEN) ACPI: FACP 7EE70290, 00F4 (r3 A_M_I_ OEMFACP 5000927 MSFT 97) (XEN) ACPI: DSDT 7EE70440, 841F (r1 A1065 A1065000 0 INTL 20060113) (XEN) ACPI: FACS 7EE7E000, 0040 (XEN) ACPI: MCFG 7EE70400, 003C (r1 A_M_I_ OEMMCFG 5000927 MSFT 97) (XEN) ACPI: OEMB 7EE7E040, 0089 (r1 A_M_I_ AMI_OEM 5000927 MSFT 97) (XEN) ACPI: HPET 7EE78860, 0038 (r1 A_M_I_ OEMHPET 5000927 MSFT 97) (XEN) ACPI: GSCI 7EE7E0D0, 2024 (r1 A_M_I_ GMCHSCI 5000927 MSFT 97) (XEN) ACPI: DMAR 7EE80100, 0070 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: SSDT 7EE810E0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000007ee70000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[7ee7e00c], vec_size[20] (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: Not using MMCONFIG. (XEN) Intel MultiProcessor Specification v1.4 (XEN) Virtual Wire compatibility mode. (XEN) OEM ID: Product ID: APIC at: 0xFEE00000 (XEN) Processor #0 6:7 APIC version 20 (XEN) Processor #1 6:7 APIC version 20 (XEN) Processor #2 6:7 APIC version 20 (XEN) Processor #3 6:7 APIC version 20 (XEN) I/O APIC #4 Version 32 at 0xFEC00000. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Processors: 4 (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2666.427 MHz processor. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: VMX enabled (XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU0 has no CMCI support (XEN) I/O virtualisation disabled (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Booting processor 2/2 eip 8c000 (XEN) Initializing CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 2 (XEN) xsave_init: cpu2: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU2 has no CMCI support (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Booting processor 3/3 eip 8c000 (XEN) Initializing CPU#3 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 3 (XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU3 has no CMCI support (XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Total of 4 processors activated. (XEN) ExtINT not setup in hardware but reported by MP table (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0 (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x821000 (XEN) elf_parse_binary: phdr: paddr=0x1821000 memsz=0xe57f8 (XEN) elf_parse_binary: phdr: paddr=0x1907000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x1908000 memsz=0x15860 (XEN) elf_parse_binary: phdr: paddr=0x191d860 memsz=0x1a57a0 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1ac3000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff8191da60 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff81ac3000 (XEN) virt_entry = 0xffffffff8191da60 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ac3000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000074000000->0000000078000000 (114688 pages to be all ocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81ac3000 (XEN) Init. ramdisk: ffffffff81ac3000->ffffffff82172a00 (XEN) Phys-Mach map: ffffffff82173000->ffffffff82273000 (XEN) Start info: ffffffff82273000->ffffffff822734b4 (XEN) Page tables: ffffffff82274000->ffffffff82289000 (XEN) Boot stack: ffffffff82289000->ffffffff8228a000 (XEN) TOTAL: ffffffff80000000->ffffffff82400000 (XEN) ENTRY ADDRESS: ffffffff8191da60 (XEN) Dom0 has maximum 4 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81821000 (XEN) elf_load_binary: phdr 1 at 0xffffffff81821000 -> 0xffffffff819067f8 (XEN) elf_load_binary: phdr 2 at 0xffffffff81907000 -> 0xffffffff81907888 (XEN) elf_load_binary: phdr 3 at 0xffffffff81908000 -> 0xffffffff8191d860 (XEN) elf_load_binary: phdr 4 at 0xffffffff8191d860 -> 0xffffffff81998000 (XEN) Scrubbing Free RAM: ..............done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen ) (XEN) Freed 156kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:19.0 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 00:1f.5 (XEN) PCI add device 01:00.0 (XEN) PCI add device 01:00.1 (XEN) no cpu_id for acpi_id 1 (XEN) no cpu_id for acpi_id 2 (XEN) no cpu_id for acpi_id 3 (XEN) no cpu_id for acpi_id 4 (XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to DOM0 ) (XEN) 'q' pressed -> dumping domain info (now=0x98:3644AB09) (XEN) General information for domain 0: (XEN) refcnt=3 dying=0 nr_pages=130112 xenheap_pages=6 dirty_cpus={0-3} max_ pages=4294967295 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=0000000d (XEN) Rangesets belonging to domain 0: (XEN) Interrupts { 0-279 } (XEN) I/O Memory { 0-febff, fec01-fedff, fee01-ffffffffffffffff } (XEN) I/O Ports { 0-1f, 22-3f, 44-60, 62-9f, a2-3f7, 400-807, 80c-cfb, d00- ffff } (XEN) Memory pages belonging to domain 0: (XEN) DomPage list too long to display (XEN) XenPage 000000000007ea0d: caf=c000000000000002, taf=e800000000000002 (XEN) XenPage 000000000007ea0c: caf=c000000000000001, taf=e800000000000001 (XEN) XenPage 000000000007ea0b: caf=c000000000000001, taf=e800000000000001 (XEN) XenPage 000000000007ea0a: caf=c000000000000001, taf=e800000000000001 (XEN) XenPage 000000000007ea06: caf=c000000000000002, taf=e800000000000002 (XEN) XenPage 0000000000077676: caf=c000000000000002, taf=e800000000000002 (XEN) VCPU information and callbacks for domain 0: (XEN) VCPU0: CPU0 [has=F] flags=1 poll=0 upcall_pend = 00, upcall_mask = 00 dirty_cpus={0} cpu_affinity={0-63} (XEN) No periodic timer (XEN) Notifying guest (virq 1, port 4, stat 0/0/0) (XEN) VCPU1: CPU1 [has=F] flags=1 poll=0 upcall_pend = 00, upcall_mask = 00 dirty_cpus={1} cpu_affinity={0-63} (XEN) No periodic timer (XEN) Notifying guest (virq 1, port 9, stat 0/0/0) (XEN) VCPU2: CPU2 [has=F] flags=1 poll=0 upcall_pend = 00, upcall_mask = 00 dirty_cpus={2} cpu_affinity={0-63} (XEN) No periodic timer (XEN) Notifying guest (virq 1, port 14, stat 0/0/0) (XEN) VCPU3: CPU3 [has=F] flags=1 poll=0 upcall_pend = 00, upcall_mask = 00 dirty_cpus={3} cpu_affinity={0-63} (XEN) No periodic timer (XEN) Notifying guest (virq 1, port 19, stat 0/0/0) (XEN) Guest interrupt information: (XEN) IRQ: 0, IRQ affinity:0xffffffff, Vec:240 type=IO-APIC-edge status= 00000000 mapped, unbound (XEN) IRQ: 1, IRQ affinity:0x00000001, Vec: 40 type=IO-APIC-edge status= 00000006 mapped, unbound (XEN) IRQ: 2, IRQ affinity:0xffffffff, Vec:226 type=XT-PIC status= 00000000 mapped, unbound (XEN) IRQ: 3, IRQ affinity:0xffffffff, Vec:227 type=XT-PIC status= 00000002 mapped, unbound (XEN) IRQ: 4, IRQ affinity:0xffffffff, Vec:241 type=IO-APIC-edge status= 00000000 mapped, unbound (XEN) IRQ: 5, IRQ affinity:0xffffffff, Vec:229 type=XT-PIC status= 00000010 in-flight=0 domain-list=0: 5(----), (XEN) IRQ: 6, IRQ affinity:0x00000001, Vec: 48 type=IO-APIC-edge status= 00000002 mapped, unbound (XEN) IRQ: 7, IRQ affinity:0xffffffff, Vec:231 type=XT-PIC status= 00000010 in-flight=0 domain-list=0: 7(----), (XEN) IRQ: 8, IRQ affinity:0x00000001, Vec: 56 type=IO-APIC-edge status= 00000002 mapped, unbound (XEN) IRQ: 9, IRQ affinity:0x00000001, Vec: 64 type=IO-APIC-edge status= 00000002 mapped, unbound (XEN) IRQ: 10, IRQ affinity:0xffffffff, Vec:234 type=XT-PIC status= 00000002 mapped, unbound (XEN) IRQ: 11, IRQ affinity:0xffffffff, Vec:235 type=XT-PIC status= 00000002 mapped, unbound (XEN) IRQ: 12, IRQ affinity:0x00000001, Vec: 72 type=IO-APIC-edge status= 00000006 mapped, unbound (XEN) IRQ: 13, IRQ affinity:0x00000001, Vec: 80 type=IO-APIC-edge status= 00000002 mapped, unbound (XEN) IRQ: 14, IRQ affinity:0x00000001, Vec: 88 type=IO-APIC-edge status= 00000006 mapped, unbound (XEN) IRQ: 15, IRQ affinity:0x00000001, Vec: 96 type=IO-APIC-edge status= 00000002 mapped, unbound (XEN) IRQ: 16, IRQ affinity:0x00000001, Vec:104 type=IO-APIC-level status= 00000002 mapped, unbound (XEN) IRQ: 17, IRQ affinity:0x00000001, Vec:112 type=IO-APIC-level status= 00000002 mapped, unbound (XEN) IRQ: 18, IRQ affinity:0x00000001 Vec:120 type=IO-APIC-level status=0 0000002 mapped, unbound (XEN) IRQ: 20, IRQ affinity:0x00000001, Vec:136 type=IO-APIC-level status= 00000002 mapped, unbound (XEN) IRQ: 22, IRQ affinity:0x00000001, Vec:144 type=IO-APIC-level status= 00000002 mapped, unbound (XEN) IRQ: 24, IRQ affinity:0x00000001, Vec:152 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IRQ: 25, IRQ affinity:0x00000002, Vec:160 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IRQ: 26, IRQ affinity:0x00000004, Vec:168 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IRQ: 27, IRQ affinity:0x00000008, Vec:176 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IRQ: 28, IRQ affinity:0xffffffff, Vec:184 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IRQ: 29, IRQ affinity:0xffffffff, Vec:192 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IRQ: 30, IRQ affinity:0xffffffff, Vec:200 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IRQ: 31, IRQ affinity:0xffffffff, Vec:208 type=HPET-MSI status= 00000000 mapped, unbound (XEN) IO-APIC interrupt information: (XEN) IRQ 0 Vec240: (XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1, dest_mode=logical, d elivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:255 (XEN) IRQ 1 Vec 40: (XEN) Apic 0x00, Pin 1: vector=40, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:1 (XEN) IRQ 4 Vec241: (XEN) Apic 0x00, Pin 4: vector=241, delivery_mode=1, dest_mode=logical, d elivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:255 (XEN) IRQ 6 Vec 48: (XEN) Apic 0x00, Pin 6: vector=48, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 8 Vec 56: (XEN) Apic 0x00, Pin 8: vector=56, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 9 Vec 64: (XEN) Apic 0x00, Pin 9: vector=64, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 12 Vec 72: (XEN) Apic 0x00, Pin 12: vector=72, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 13 Vec 80: (XEN) Apic 0x00, Pin 13: vector=80, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 14 Vec 88: (XEN) Apic 0x00, Pin 14: vector=88, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:1 (XEN) IRQ 15 Vec 96: (XEN) Apic 0x00, Pin 15: vector=96, delivery_mode=1, dest_mode=logical, de livery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1 (XEN) IRQ 16 Vec104: (XEN) Apic 0x00, Pin 16: vector=104, delivery_mode=1, dest_mode=logical, d elivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1 (XEN) IRQ 17 Vec112: (XEN) Apic 0x00, Pin 17: vector=112, delivery_mode=1, dest_mode=logical, d elivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1 (XEN) IRQ 18 Vec120: (XEN) Apic 0x00, Pin 18: vector=120, delivery_mode=1, dest_mode=logical, d elivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1 (XEN) IRQ 20 Vec136: (XEN) Apic 0x00, Pin 20: vector=136, delivery_mode=1, dest_mode=logical, d elivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1 (XEN) IRQ 22 Vec144: (XEN) Apic 0x00, Pin 22: vector=144, delivery_mode=1, dest_mode=logical, d elivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1 (XEN) Physical memory information: (XEN) Xen heap: 0kB free (XEN) heap[14]: 64480kB free (XEN) heap[15]: 131072kB free (XEN) heap[16]: 262144kB free (XEN) heap[17]: 524288kB free (XEN) heap[18]: 550172kB free (XEN) Dom heap: 1532156kB free (XEN) Dumping timer queues: NOW=0x000000A21ACBA161 (XEN) CPU[00] 1 : ffff82c48031a540 ex=0x000000A22A649287 0000000000000000 ffff 82c480195050 (XEN) 2 : ffff82c4803167c0 ex=0x000000A22B9F1A7E 0000000000000000 ffff82c48016 de26 (XEN) 3 : ffff83007ea00060 ex=0x000000A22A656965 ffff83007ea00000 ffff82c48011 c429 (XEN) 4 : ffff82c4803168a0 ex=0x000000AEB7A31A54 0000000000000000 ffff82c48016 dd04 (XEN) L0 : ffff82c4802fa5e0 ex=0x000000A21AFB61F8 0000000000000000 ffff82c48011 6fdf (XEN) L1 : ffff83007ea68798 ex=0x000000A21AFB6805 0000000000000000 ffff82c48011 8333 (XEN) (XEN) CPU[01] 1 : ffff83007cefe060 ex=0x000000A22A656962 ffff83007cefe000 ffff 82c48011c429 (XEN) L0 : ffff83007ea68ce8 ex=0x000000A21B2CE0BC 0000000000000001 ffff82c48011 8333 (XEN) (XEN) CPU[02] 1 : ffff83007cefc060 ex=0x000000A2D0FD7F13 ffff83007cefc000 ffff 82c48011c429 (XEN) L0 : ffff83007ea68da8 ex=0x000000A21B5C5653 0000000000000002 ffff82c48011 8333 (XEN) (XEN) CPU[03] 1 : ffff83007cefa060 ex=0x000000A2EECB4C55 ffff83007cefa000 ffff 82c48011c429 (XEN) L0 : ffff83007ea68e68 ex=0x000000A21B59FE36 0000000000000003 ffff82c48011 8333 (XEN) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |
