[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Re: [Xen-users] Xen 3.4.2 hypervisor crash, Cannot access memory beyond end of bootstrap direct-map area, Unknown interrupt



No, it'll be a 32-bit-specific issue though. I would recommend just running
a 64-bit build of Xen, if the CPU supports 64-bit mode. It'll be something
to do with GRUB2 dumping the dom0 kernel and initrd higher in memory than
GRUB1, past the end of where 32-bit Xen is set up to be able to access.
Probably not a hard fix, although I have no GRUB2 installation to test with.

 -- Keir

On 28/01/2010 21:16, "Pasi Kärkkäinen" <pasik@xxxxxx> wrote:

> 
> CCing to xen-devel and Keir.
> 
> Keir: Have you seen this Xen hypervisor crash earlier? serial log below..
> 
> -- Pasi
> 
> On Thu, Jan 28, 2010 at 03:47:20PM -0500, Gabor Szilagyi wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>> 
>> Pasi Kärkkäinen wrote:
>>> On Thu, Jan 28, 2010 at 03:00:09PM -0500, Gabor Szilagyi wrote:
>>> Pasi Kärkkäinen wrote:
>>>>>> On Thu, Jan 28, 2010 at 11:11:50AM -0500, Gabor Szilagyi wrote:
>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>>>> Hash: SHA1
>>>>>>> 
>>>>>>> Pasi Kärkkäinen wrote:
>>>>>>>> On Wed, Jan 27, 2010 at 09:41:02AM -0500, Gabor Szilagyi wrote:
>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>>>>>> Hash: SHA1
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> Martin Kraus wrote:
>>>>>>>>>> On Tue, Jan 26, 2010 at 05:34:59PM -0200, Thiago Camargo Martins
>>>>>>>>>> Cordeiro wrote:
>>>>>>>>>>> Hi!
>>>>>>>>>>> 
>>>>>>>>>>> 1- Get the ISO of the Debian Lenny 5.0 amd64 from http://debian.org;
>>>>>>>>>>> 2- Install your Debian into your own partition scheme (LVM over
>>>>>>>>>>> RAID);
>>>>>>>>>>> 3- Reboot into your new fresh Debian Lenny; upgrade it;
>>>>>>>>>>> 4- * GRUB1 is still the default in Lenny, verify it;
>>>>>>>>>>> 5- Install the Xen with the command: "aptitude install
>>>>>>>>>>> xen-linux-system-2.6.26-2-xen-amd64";
>>>>>>>>>>> 6- Reboot into you new dom0.
>>>>>>>>>> Thanks for the effort but how does this solve the problem that xen
>>>>>>>>>> doesn't
>>>>>>>>>> start? I'm already running virtual hosts on that machine and I can't
>>>>>>>>>> rip
>>>>>>>>>> all of this apart just to get stuck with unbootable system again.
>>>>>>>>>> 
>>>>>>>>>> What I need is to find out what the problem is and then start ripping
>>>>>>>>>> stuff
>>>>>>>>>> apart. I've tried to compile xen myself, versions 3.2, 3.3, 3.4, hg
>>>>>>>>>> tip, all
>>>>>>>>>> get stuck at some time during xen boot. Until I've tried the live cd,
>>>>>>>>>> I
>>>>>>>>>> thought that it's some incompatibility with my hardware but since the
>>>>>>>>>> live cd is
>>>>>>>>>> debian lenny on iso and it works fine, I have to look for the part
>>>>>>>>>> that causes
>>>>>>>>>> xen to freeze.
>>>>>>>>>> 
>>>>>>>>>> Since there is only bios, grub and xen running in turn before the
>>>>>>>>>> machine
>>>>>>>>>> gets stuck I'd say that the problem is in one of these systems.
>>>>>>>>>> 
>>>>>>>>>> I'll try to find out something about grub and then I'm going after
>>>>>>>>>> kvm before
>>>>>>>>>> I decide to scratch the whole machine.
>>>>>>>>> Hi Martin,
>>>>>>>>> 
>>>>>>>>> I am having the same problem ... ever since I installed grub2 I can
>>>>>>>>> not
>>>>>>>>> get xen to boot. I was told it is possible but yet to see someone
>>>>>>>>> writing it down how. Tried the "new" syntax, put dummy=dummy as first
>>>>>>>>> cmd line argument, even compiled the root=/... in the kernel nothing
>>>>>>>>> works.
>>>>>>>>> 
>>>>>>>>> I just get Panic on CPU 0 ... and stuck dump.
>>>>>>>>> 
>>>>>>>> Please see:
>>>>>>>> http://wiki.xensource.com/xenwiki/XenCommonProblems
>>>>>>>> 
>>>>>>>> section:
>>>>>>>> "Booting Xen with GRUB2 fails?"
>>>>>>> Thanks for the tip ... I tried all those no change :
>>>>>>> 
>>>>>>> here what I have currently in gurb.cfg both recommendation is use the
>>>>>>> file name twice and use dummy=dummy
>>>>>> No, you don't use both of them.
>>>>>> 
>>>>>> The problem is that grub2 destroys the *first* parameter,
>>>>>> so if you add the filename twice, that already is the extra
>>>>>> first parameter, so no need for dummy anymore.
>>>>>> 
>>>>>> Or then don't add the filename, but use dummy.
>>>>>> You just need *one* extra parameter there, as the first parameter.
>>>>>> 
>>>>>> See the working example from here:
>>>>>> http://old.nabble.com/Strange-interaction-from-grub2-and-XEN-td26464067.h
>>>>>> tml
>>>>>> 
>>>>>> 
>>>>>>> I am trying both the newest patched kernel and the stuck kernel coming
>>>>>>> with 3.4.2 source ... both compile without error (I pretty sure I got
>>>>>>> the config right for xen). Actually I can boot the 2.6.31.6-xen-2 on
>>>>>>> bare metal (strangely not the 2.6.18.8 !!)
>>>>>>> 
>>>>>> xenlinux kernels (2.6.18.8) don't support running as baremetal.
>>>>>> pv_ops Xen kernel do support that.
>>>>>> 
>>>>>>> But got the same error ... so I strongly believe that the xen-3.4.2.gz
>>>>>>> part crashes already with grub2 ..
>>>>>>> 
>>>>>>> I tried several other combination from grub> prompt pretty much the same
>>>>>>>  CPU 0 panic and the numbers after (sometime sligthly different dump )
>>>>>>> 
>>>>>> We really need to see the full console output to say what's wrong.
>>> Pasi, Sorry for the crossposting I put this in my original thread as
>>> well but maybe helpful here..
>>> 
>>> 
>>>> Ok.. Hmm.. weird crash. Try removing "sync_console console_to_ring" from
>>>> the xen options.
>>> 
>>>> Does that make a difference?
>> 
>> No unfortunately no difference: (note that I did make clean make
>> install-xen) just to make sure it compiled right ... but the crash is
>> identical...
>> 
>>  __  __            _____ _  _    ____
>>  \ \/ /___ _ __   |___ /| || |  |___ \
>>   \  // _ \ '_ \    |_ \| || |_   __) |
>>   /  \  __/ | | |  ___) |__   _| / __/
>>  /_/\_\___|_| |_| |____(_) |_|(_)_____|
>> 
>> (XEN) Xen version 3.4.2 (root@xxxxxxxxxxxx) (gcc version 4.3.4 (Debian
>> 4.3.4-6) ) Thu Jan 28 15:41:41 EST 2010
>> (XEN) Latest ChangeSet: unavailable
>> (XEN) Command line: dummy=dummy dom0_mem=512M loglvl=all
>> guest_loglvl=all com1=9600,8n1 console=com1
>> (XEN) Video information:
>> (XEN)  VGA is text mode 80x25, font 8x16
>> (XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
>> (XEN) Disc information:
>> (XEN)  Found 2 MBR signatures
>> (XEN)  Found 2 EDD information structures
>> (XEN) Xen-e820 RAM map:
>> (XEN)  0000000000000000 - 000000000009d000 (usable)
>> (XEN)  000000000009d000 - 00000000000a0000 (reserved)
>> (XEN)  00000000000ce000 - 00000000000d4000 (reserved)
>> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
>> (XEN)  0000000000100000 - 00000000d7f80000 (usable)
>> (XEN)  00000000d7f80000 - 00000000d7f98000 (ACPI data)
>> (XEN)  00000000d7f98000 - 00000000d7fbc000 (ACPI NVS)
>> (XEN)  00000000d7fbc000 - 00000000e0000000 (reserved)
>> (XEN)  00000000f8000000 - 00000000fc000000 (reserved)
>> (XEN)  00000000fec00000 - 00000000fec10000 (reserved)
>> (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
>> (XEN)  00000000ff000000 - 0000000100000000 (reserved)
>> (XEN)  0000000100000000 - 00000001fe000000 (usable)
>> (XEN)  00000001fe000000 - 0000000200000000 (reserved)
>> (XEN)
>> (XEN) ****************************************
>> (XEN) Panic on CPU 0:
>> (XEN) Cannot access memory beyond end of bootstrap direct-map area
>> (XEN) ****************************************
>> (XEN)
>> (XEN) Reboot in five seconds...
>> (XEN) Unknown interrupt (cr2=00000000)
>> (XEN)   ff202ec4  a1e00000  00000002  ff22be54  00000086  00000001
>> ff1d68dc  00000000  ff14e687  0000e008  00000286  ff1d67c0  0000000a
>> ff1c5146  ff22b0
>> 
>> 
>>> 
>>>> -- Pasi
>>> 
>>> Press CTRL-A Z for help on special keys
>>> 
>>> 
>>> 
>>>  __  __            _____ _  _    ____
>>> 
>>>  \ \/ /___ _ __   |___ /| || |  |___ \
>>> 
>>>   \  // _ \ '_ \    |_ \| || |_   __) |
>>> 
>>>   /  \  __/ | | |  ___) |__   _| / __/
>>> 
>>>  /_/\_\___|_| |_| |____(_) |_|(_)_____|
>>> 
>>> 
>>> 
>>> (XEN) Xen version 3.4.2 (root@xxxxxxxxxxxx) (gcc version 4.3.4 (Debian
>>> 4.3.4-6) ) Mon Jan 25 16:28:40 EST 2010
>>> (XEN) Latest ChangeSet: unavailable
>>> 
>>> (XEN) Console output is synchronous.
>>> 
>>> (XEN) Command line: dummy=dummy dom0_mem=512M loglvl=all
>>> guest_loglvl=all sync_console console_to_ring com1=9600,8n1 console=com1
>>> (XEN) Video information:
>>> 
>>> (XEN)  VGA is text mode 80x25, font 8x16
>>> 
>>> (XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>> 
>>> (XEN) Disc information:
>>> 
>>> (XEN)  Found 2 MBR signatures
>>> 
>>> (XEN)  Found 2 EDD information structures
>>> (XEN) Xen-e820 RAM map:
>>> (XEN)  0000000000000000 - 000000000009d000 (usable)
>>> (XEN)  000000000009d000 - 00000000000a0000 (reserved)
>>> (XEN)  00000000000ce000 - 00000000000d4000 (reserved)
>>> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
>>> (XEN)  0000000000100000 - 00000000d7f80000 (usable)
>>> (XEN)  00000000d7f80000 - 00000000d7f98000 (ACPI data)
>>> (XEN)  00000000d7f98000 - 00000000d7fbc000 (ACPI NVS)
>>> (XEN)  00000000d7fbc000 - 00000000e0000000 (reserved)
>>> (XEN)  00000000f8000000 - 00000000fc000000 (reserved)
>>> (XEN)  00000000fec00000 - 00000000fec10000 (reserved)
>>> (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
>>> (XEN)  00000000ff000000 - 0000000100000000 (reserved)
>>> (XEN)  0000000100000000 - 00000001fe000000 (usable)
>>> (XEN)  00000001fe000000 - 0000000200000000 (reserved)
>>> (XEN)
>>> (XEN) ****************************************
>>> (XEN) Panic on CPU 0:
>>> (XEN) Cannot access memory beyond end of bootstrap direct-map area
>>> (XEN) ****************************************
>>> (XEN)
>>> (XEN) Reboot in five seconds...
>>> (XEN) Unknown interrupt (cr2=00000000)
>>> (XEN)   ff202ec4  a1e00000  00000002  ff22be54  00000086  00000002
>>> ff1d68dc  00000000  ff14e687  0000e008  00000286  ff1d67c0  0000000a
>>> ff1c5146  ff22b0
>>> 
>>> 
>>> Gabor
>>> 
>>>>>> -- Pasi
>>>>>> 
>> 
>> - --
>> +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
>> | Gabor Szilagyi (Mr.)                    Gabor.Szilagyi@xxxxxxxxxxxx |
>> | Computer System Adm.                        http://www.nyo.unep.org |
>> | UNEP/New York Office      Tel: +1-212-963-7781/Fax: +1-212-963-7341 |
>> |       I only open attachments I requested !!! No exceptions !!!     |
>> |            Put your message in the email body !!!                   |
>> +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
>> "He who sacrifices freedom for security is neither secure nor free."
>> 
>>                                                   Benjamin Franklin
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.10 (GNU/Linux)
>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>> 
>> iEYEARECAAYFAkth99gACgkQcYMbOTV6LVoUpACgs81ojuLe8zTaS7lnEY08M2n3
>> Z4MAnRYSnEx9UrExQm07Y2uYStXsFMN+
>> =rzdV
>> -----END PGP SIGNATURE-----



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.