Re: [Xen-devel] Issue with pv_ops Kernel 2.6.31.6 and Xen

[Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>]

On Sun, Feb 07, 2010 at 04:39:06PM +0100, Marcial Rion wrote:
> BTW: The problem also persists when using XEN 4.0.0-rc3-pre. See the
> dump of the bootup trace below:
> 
>   Booting 'Xen 4.0, Kernel 2.6.31'
> 
> root         (hd0,0)
>  Filesystem type is ext2fs, partition type 0x83
> kernel       /boot/xen-4.0.gz dom0_mem=256M loglvl=all guest_loglvl=all
> sync_co
> nnsole console_to_ring com2=38400,8n1 console=com2
>    [Multiboot-elf, <0x100000:0x12d000:0xad000>, shtab=0x2da078,
> entry=0x100000]
> module       /boot/kernel-2.6.31.6-xen root=/dev/hda3 ro console=hvc0
> earlyprin
> tk=xen

Well, all your arguments look right, so I can think of two things:
 1). You don't have /dev/console, /dev/hvc0 and /dev/tty0 created
     by init scripts during boot. Usually this is a udev job, but
     I don't know how Gentoo does it.

 2). Gentoo has it hard-coded to use a different console. Are there
     any documention online about configuring Xen with Gentoo and what
     needs to be done?

Is your machine pingable after you have booted it? If you give it
enought time (say 3 minutes) do you see anyting on the screen?

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel