[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [Xen-devel] Re: Panic on boot on Sun Blade 6270
Why it will fail on 0xffff828bfffff0e0 ? I try to build 19913 and seems it should be 0xffff828bffffe0e0. If you can paste your objdump output for init_apic_ldr_phys, maybe it will be helpful. BTW, if SLES 11 works for you, why not continue that? --jyh ffff828c801879d0 <init_apic_ldr_phys>: ........... ffff828c801879f8: b8 ff ff ff ff mov $0xffffffff,%eax ffff828c801879fd: a3 e0 e0 ff ff 8b 82 mov %eax,0xffff828bffffe0e0 ffff828c80187a04: ff ff ffff828c80187a06: a1 d0 e0 ff ff 8b 82 mov 0xffff828bffffe0d0,%eax ffff828c80187a0d: ff ff ffff828c80187a0f: 25 ff ff ff 00 and $0xffffff,%eax ffff828c80187a14: a3 d0 e0 ff ff 8b 82 mov %eax,0xffff828bffffe0d0 ............... >-----Original Message----- >From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx >[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Dan Gora >Sent: Friday, March 12, 2010 5:55 AM >To: xen-devel@xxxxxxxxxxxxxxxxxxx >Subject: [Xen-devel] Re: Panic on boot on Sun Blade 6270 > >Also setting noapic and acpi=off does not change the panic... > >thanks, >dan > >On Thu, Mar 11, 2010 at 6:40 PM, Dan Gora <dan.gora@xxxxxxxxx> wrote: >> Hi All, >> >> I'm getting the attached panic in the hypervisor on a Sun 6270 running >> xen-testing.hg changeset 19913:6063c16aeeaa. I can run xen-3.3.1 from >> the standard SLES 11 distribution (which says that it's changeset >> 18546 but it has many patches). Any ideas? >> >> thanks, >> dan > >_______________________________________________ >Xen-devel mailing list >Xen-devel@xxxxxxxxxxxxxxxxxxx >http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |