|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9
Hi, after having almost no issues with hiccups anymore (HPET was disabled in BIOS - my fault) i also notices the GSI ERRORs regarding GSI 2 and 9 in my dmesg xen dmesg: http://pastebin.ca/1850372 dom0 dmesg: http://pastebin.ca/1850373 is this somehow related with the fact that "xenpm get-cpufreq-states" results in no output at all, and "xenpm set-scaling-governor ondemand" results in: [CPU0] failed to set governor name [CPU1] failed to set governor name [CPU2] failed to set governor name [CPU3] failed to set governor name [CPU4] failed to set governor name [CPU5] failed to set governor name [CPU6] failed to set governor name [CPU7] failed to set governor name - i know this (cpufreq) already worked with a 2.6.33 "xenified" dom0-Kernel... Greetings Tobias Am Donnerstag 18 März 2010 22:27:00 schrieb Pasi Kärkkäinen: > On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > > pvdisplay does not work in my RHEL machine. > > > > I did pvscan. > > below is the output. > > > > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > > > > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] > > Ok so /dev/sda2 is the correct device holding the VolGroup01. > > Looking at your latest capture.doc I see this: > > Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen > nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 > > So your root= parameter is wrong! Edit grub.conf and replace it with the > actual root device: root=/dev/VolGroup01/LogVol00 > > -- Pasi > > > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> > > wrote: > > > > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > > > I did the below steps for pvops dom 0 kernel. > > > > > > make menuconfig > > > make bzImage > > > make modules > > > make modules_install > > > cp -a .config /boot/config-2.6.32.10 > > > cp -a System.map /boot/System.map-2.6.32.10 > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img > > > > 2.6.32.10 > > > > > I tried root=/dev/VolGroup01/LogVol00 . > > > > Ok. > > > > Please run "pvdisplay" to see which actual partition is the LVM PV > > for your > > volume group. > > > > Also if you're running Fedora 12 you could try generating an initrd > > image > > with dracut instead of mkinitrd. > > > > -- Pasi > > > > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > > > > <[1][2]pasik@xxxxxx> wrote: > > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > > > > Here is the output of df -h and cat /etc/fstab of my > > > > machine. > > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? > > > > > > How did you generate the initrd image for the dom0 kernel? > > > > > > Anyway this sounds like a grub.conf or initrd problem, not > > > Xen or > > > > pvops > > > > > dom0 kernel kernel problem. > > > > > > -- Pasi > > > > > > > Please let me know your thoughts. > > > > > > > > [root@localhost kishore]# df -h > > > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > > > /dev/mapper/VolGroup01-LogVol00 > > > > > > > > 223G 29G 182G 14% / > > > > > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > > > > > [root@localhost kishore]# cat /etc/fstab > > > > > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > > > > > sysfs /sys sysfs defaults 0 0 > > > > > > > > proc /proc proc defaults 0 0 > > > > > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > > > > > [root@localhost kishore]# > > > > > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > > > > > > <[1][2][3]pasik@xxxxxx> wrote: > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore > > > > kumar > > > > wrote: > > > > > I am not sure. Can you please let me know how to > > > > check > > > > > this? any > > > > > > > command > > > > > > > > > ?? > > > > > > > > well simple "df -h" will show it. and also "cat > > > > /etc/fstab". > > > > > > You can also check it from your grub configuration.. > > > > from > > > > the > > > > > working > > > > > > > baremetal (non-Xen) entry. > > > > > > > > -- Pasi > > > > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > > > > > > > > <[1][2][3][4]pasik@xxxxxx> wrote: > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, > > > > > kishore > > > > kumar > > > > > wrote: > > > > > > attached is the log captured in with the > > > > > > word > > > > > > document . > > > > > > > > Scanning logical volumes > > > > > Reading all physical volumes. This may take a > > > > while... > > > > > > > Activating logical volumes > > > > > Volume group "VolGroup01" not found > > > > > Trying to resume from /dev/VolGroup01/LogVol01 > > > > > Unable to access resume device > > > > (/dev/VolGroup01/LogVol01) > > > > > > > Creating root device. > > > > > Mounting root filesystem. > > > > > mount: could not find filesystem '/dev/root' > > > > > Setting up other filesystems. > > > > > Setting up new root fs > > > > > setuproot: moving /dev failed: No such file or > > > > directory > > > > > > > no fstab.sys, mounting internal defaults > > > > > setuproot: error mounting /proc: No such file > > > > > or > > > > directory > > > > > > > setuproot: error mounting /sys: No such file or > > > > directory > > > > > > > Switching to new root and running init. > > > > > unmounting old /dev > > > > > unmounting old /proc > > > > > unmounting old /sys > > > > > switchroot: mount failed: No such file or > > > > > directory init used greatest stack depth: 4088 bytes > > > > > left Kernel panic - not syncing: Attempted to kill > > > > > init! > > > > > > > > > > So it seems it gets all the way to executing > > > > > the > > > > initrd > > > > > image, > > > > > > > > which then fails to mount the root fs. > > > > > > > > > > Earlier in the log: > > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 > > > > > SControl > > > > 300) > > > > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, > > > > > STBOA3AA, > > > > max > > > > > UDMA/133 > > > > > > > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ > > > > (depth > > > > > 31/32), AA > > > > > > > > ata1.00: configured for UDMA/133 > > > > > scsi 0:0:0:0: Direct-Access ATA > > > > > Hitachi > > > > HDT72102 > > > > > STBO > > > > > > > PQ: 0 > > > > > > > > > ANSI: 5 > > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical > > > > blocks: (250 > > > > > GB/232 > > > > > > > GiB) > > > > > > > > > sd 0:0:0:0: [sda] Write Protect is off > > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > > sd 0:0:0:0: [sda] Write cache: enabled, read > > > > > cache: > > > > > > enabled, > > > > > > > doesn't > > > > > > > > > support DPO or FUA > > > > > sda: sda1 sda2 > > > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > > > > > so /dev/sda was detected. Is your root lvm > > > > > volume > > > > on > > > > > /dev/sda ? > > > > > > > > Is /dev/VolGroup01/LogVol01 really your root > > > > > fs? > > > > > > > > > > -- Pasi > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi > > > > Kärkkäinen > > > > > > > <[1][2][3][4][5]pasik@xxxxxx> wrote: > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM > > > > > > -0700, > > > > kishore > > > > > kumar > > > > > > > wrote: > > > > > > > Please find the attached log file > > > > > > > after > > > > fixing > > > > > the > > > > > > > dom 0 > > > > > > > > > kernel cmd > > > > > > > > > > > line > > > > > > > > > > > > > as below > > > > > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > > earlyprintk=xen > > > > > > > > > > > nomodeset > > > > > > > > > > > > > > > > > > There's something wrong with the log, > > > > > > the > > > > dom0 > > > > > kernel > > > > > > > parts are > > > > > > > > > all on > > > > > > > > > > > one line.. > > > > > > It's really difficult to read it. > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, > > > > > > > Pasi > > > > > > Kärkkäinen > > > > > > > > > <[1][2][3][4][5][6]pasik@xxxxxx> wrote: > > > > > > > On Tue, Mar 16, 2010 at > > > > > > > 02:16:22PM > > > > -0700, > > > > > kishore > > > > > > > kumar > > > > > > > > > wrote: > > > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > > > > git clone > > > > > > git://[1][2][3][4][5][6][7]git.kernel.org/pub/scm/linux/kernel/git/jeremy > >/xen.git > > > > > > > > > > linux-2.6-xen > > > > > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > > > > > make clean > > > > > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > > > > > wget -O .config > > > > > > [2][3][4][5][6][7][8]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/confi > >g-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > make oldconfig > > > > > > > > > > > > > > > > make bzImage > > > > > > > > > > > > > > > > make modules > > > > > > > > > > > > > > > > make modules_install > > > > > > > > > > > > > > > > cp -a .config > > > > /boot/config-2.6.32.9 > > > > > > > > > > cp -a System.map > > > > > > /boot/System.map-2.6.32.9 > > > > > > > > > > > cp -a arch/x86/boot/bzImage > > > > > > > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > and modified the grub.conf > > > > > > > > as > > > > below > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > > > > > kernel /xen.gz > > > > > > > > console=vga,com1 > > > > > > > > com1=115200,8n1 > > > > > > > > > msi=1 > > > > > > > > > > > iommu=1 > > > > > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > > > > > > > > > root=/dev/VolGroup01/LogVo100 > > > > > > > > > > > rhgb > > > > > > > > > > > > > quiet > > > > > > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > > > > > > > and rebooted the machine. > > > > > > > > Then > > > > It > > > > > booted with > > > > > > > some > > > > > > > > > xen > > > > > > > > > > > messages > > > > > > > > > > > > > and > > > > > > > > > > > > > > > stopped. Those were the > > > > messages > > > > > captured > > > > > > > from > > > > > > > > > serial > > > > > > > > > > > console. > > > > > > > > > > > > > > Please let me know if I did > > > > something > > > > > wrong > > > > > > > here. > > > > > > > > > > > Please fix the kernel cmdline > > > > > > > based > > > > on my > > > > > earlier > > > > > > > email, > > > > > > > > > and > > > > > > > > > > > capture and > > > > > > > > > > > > > post the > > > > > > > serial console log again! > > > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 > > > > > > > > PM, > > > > Pasi > > > > > > Kärkkäinen > > > > > > > > > > > > > > > > > > <[3][4][5][6][7][8][9]pasik@xxxxxx> > > > > wrote: > > > > > > > > On Tue, Mar 16, 2010 at > > > > 01:16:28PM > > > > > -0700, > > > > > > > Jeremy > > > > > > > > > > Fitzhardinge > > > > > > > > > > > > > wrote: > > > > > > > > > On 03/16/2010 12:48 PM, > > > > > > > > > Pasi > > > > > > Kärkkäinen > > > > > > > wrote: > > > > > > > > >> On Tue, Mar 16, 2010 at > > > > 09:43:44PM > > > > > +0200, > > > > > > > Pasi > > > > > > > > > > Kärkkäinen > > > > > > > > > > > > > wrote: > > > > > > > > >>> On Tue, Mar 16, 2010 > > > > > > > > >>> at > > > > > > 10:32:17AM > > > > > > > -0700, > > > > > > > > > kishore > > > > > > > > > > > kumar > > > > > > > > > > > > > wrote: > > > > > > > > >>>> Attached is the > > > > output > > > > > captured > > > > > > > from > > > > > > > > > serial > > > > > > > > > > > console. > > > > > > > > > > > > > > >>>> Machine does not > > > > > > > > >>>> boot > > > > after > > > > > > compiling xen > > > > > > > > > 3.4.3 > > > > > > > > > > > with > > > > > > > > > > > > > pv_ops dom > > > > > > > > > > > > > > > 0 kernel. > > > > > > > > > > > > > > > > >>>> Please let me > > > > > > > > >>>> know > > > > what is > > > > > going > > > > > > > wrong > > > > > > > > > here. > > > > > > > > > > > > > >>> Ok this looks like a > > > > > > > > >>> bug > > > > that is > > > > > already > > > > > > > being > > > > > > > > > sorted > > > > > > > > > > > out on > > > > > > > > > > > > > > xen-devel mailinglist. > > > > > > > > > > > > > > > > >>> I added CC to > > > > > > > > >>> xen-devel. > > > > > > > > > > > > > > > > > > Those messages are not a > > > > problem in > > > > > > themselves, > > > > > > > > > but the > > > > > > > > > > > related > > > > > > > > > > > > > > problem > > > > > > > > > > > > > > > > > is believed to be fixed > > > > > > > > > in > > > > current > > > > > > > xen/stable-2.6.32.x. > > > > > > > > > > > It > > > > > > > > > > > > > looks like > > > > > > > > > > > > > > > > the output stops there > > > > because the > > > > > Xen > > > > > > > console > > > > > > > > > isn't set > > > > > > > > > > > up > > > > > > > > > > > > > properly > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > some reason. > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" > > > > > > > > from > > > > the > > > > > options.. > > > > > > > the > > > > > > > > > dom0 > > > > > > > > > > > kernel > > > > > > > > > > > > > cmdline > > > > > > > > > > > > > > > should be like this: > > > > > > > > ro > > > > root=/dev/VolGroup01/LogVol00 > > > > > > console=hvc0 > > > > > > > > > > earlyprintk=xen > > > > > > > > > > > > > nomodeset > > > > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > References > > > > > > > > > > > > > > > > Visible links > > > > > > > > 1. > > > > > > [5][6][7][8][9][10]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/ > >xen.git > > > > > > > > > > 2. > > > > > > [6][7][8][9][10][11]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config > >-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > 3. > > > > mailto:[7][8][9][10][11][12]pasik@xxxxxx > > > > > > > > > References > > > > > > > > > > > > > > Visible links > > > > > > > 1. > > > > mailto:[9][10][11][12][13]pasik@xxxxxx > > > > > > > > > 2. > > > > > > [10][11][12][13][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy > >/xen.git > > > > > > > > > 3. > > > > > > [11][12][13][14][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config > >-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > 4. > > > > mailto:[12][13][14][15][16]pasik@xxxxxx > > > > > > > > > 5. > > > > > > [13][14][15][16][17]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy > >/xen.git > > > > > > > > > 6. > > > > > > [14][15][16][17][18]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config > >-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > 7. > > > > mailto:[15][16][17][18][19]pasik@xxxxxx > > > > > > > > > Asserting Post complete GPIO!!! > > > > > > > Transfer control to CSM 16-bit binary > > > > > > > for > > > > legacy > > > > > boot > > > > > > > > > > __ __ _____ _ _ _____ > > > > > > _ _ > > > > > > > > > > \ \/ /___ _ __ |___ /| || | |___ / > > > > _ __ > > > > > ___| || | > > > > > > > _ > > > > > > > > > __ _ > > > > > > > > > > > __ ___ > > > > > > > > > > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ > > > > > > > __| > > > > '__/ > > > > > __| || > > > > > > > |_ __| > > > > | > > > > > '_ \| > > > > > > > > > > > '__/ _ \ > > > > > > > > > > > > > / \ __/ | | | ___) |__ _| ___) > > > > > > > |__| > > > > > > (__|__ > > > > > > > _|__| > > > > > > > > > |_) | | > > > > > | > > > > > > | __/ > > > > > > | > > > > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ > > | > > |_| > > | > > > \___| |_| > > > > > > > > .__/|_| > > > > > > > > > > > \___| > > > > | > > > > |_| > > > > | > > > > > > > (XEN) Xen version 3.4.3-rc4-pre > > > > > > (kishore@localdomain) > > > > > > > (gcc > > > > > > > > > version > > > > > > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon > > > > > > Mar > > > > 15 > > > > > 13:44:31 PDT > > > > > > > 2010 > > > > > > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 > > > > 18:15:52 2010 > > > > > +0000 > > > > > > > > > 19924:6e72f8c3c017 > > > > > > > > > > > > > (XEN) Command line: console=vga,com1 > > > > > > com1=115200,8n1 > > > > > > > msi=1 > > > > > > > > > iommu=1 > > > > > > > > > > > > (XEN) Video information: > > > > > > > (XEN) VGA is text mode 80x25, font > > > > > > > 8x16 (XEN) VBE/DDC methods: none; > > > > > > > EDID > > > > transfer time: > > > 0 > > > > > > > seconds > > > > > > > > > > > (XEN) EDID info not retrieved because > > > > > > > no > > > > DDC > > > > > retrieval > > > > > > > method > > > > > > > > > > detected > > > > > > > > > > > > > (XEN) Disc information: > > > > > > > (XEN) Found 1 MBR signatures > > > > > > > (XEN) Found 1 EDD information > > > > > > > structures (XEN) Xen-e820 RAM map: > > > > > > > (XEN) 0000000000000000 - > > > > > > > 000000000009d000 > > > > > > (usable) > > > > > > > > > > (XEN) 000000000009d000 - > > > > > > > 00000000000a0000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000000e0000 - > > > > > > > 0000000000100000 > > > > > > (reserved) > > > > > > > > > > (XEN) 0000000000100000 - > > > > > > > 000000006d597000 > > > > > > (usable) > > > > > > > > > > (XEN) 000000006d597000 - > > > > > > > 000000006d686000 > > > > > > (reserved) > > > > > > > > > > (XEN) 000000006d686000 - > > > > > > > 000000006f598000 > > > > > > (usable) > > > > > > > > > > (XEN) 000000006f598000 - > > > > > > > 000000006f59a000 > > > > > > (reserved) > > > > > > > > > > (XEN) 000000006f59a000 - > > > > > > > 000000006f5af000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > (XEN) 000000006f5af000 - > > > > > > > 000000006f5d9000 > > > > > > (reserved) > > > > > > > > > > (XEN) 000000006f5d9000 - > > > > > > > 000000006f5f9000 > > > > (ACPI > > > > > data) > > > > > > > > > > (XEN) 000000006f5f9000 - > > > > > > > 000000006f6df000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > (XEN) 000000006f6df000 - > > > > > > > 000000006f700000 > > > > (ACPI > > > > > data) > > > > > > > > > > (XEN) 000000006f700000 - > > > > > > > 0000000080000000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000a0000000 - > > > > > > > 00000000b0000000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000fc000000 - > > > > > > > 00000000fd000000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000fed1c000 - > > > > > > > 00000000fed20000 > > > > > > (reserved) > > > > > > > > > > (XEN) 00000000ffc00000 - > > > > > > > 0000000100000000 > > > > > > (reserved) > > > > > > > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 > > > > > > > INTEL > > > > ) > > > > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > > 1000013) > > > > > > > > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 > > > > > > > INTEL > > > > THRLY > > > > > > 3 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 0 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 > > > > INTEL SSDT > > > > > PM > > > > > > > 4000 > > > > > > > > > INTL > > > > > > > > > > > 20061109) > > > > > > > > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 > > > > > > > INTEL > > > > THRLY > > > > > > 1 > > > > > > > > > MSFT > > > > > > > > > > > 100000D) > > > > > > > > > > > > > (XEN) Domain heap initialised > > > > > > > (XEN) Processor #0 6:12 APIC version > > > > > > > 21 (XEN) Processor #2 6:12 APIC > > > > > > > version 21 (XEN) Processor #4 6:12 > > > > > > > APIC version 21 (XEN) Processor #16 > > > > > > > 6:12 APIC version 21 (XEN) Processor > > > > > > > #18 6:12 APIC version 21 (XEN) > > > > > > > Processor #20 6:12 APIC version 21 > > > > > > > (XEN) Processor #1 6:12 APIC version > > > > > > > 21 (XEN) Processor #3 6:12 APIC > > > > > > > version 21 (XEN) Processor #5 6:12 > > > > > > > APIC version 21 (XEN) Processor #17 > > > > > > > 6:12 APIC version 21 (XEN) Processor > > > > > > > #19 6:12 APIC version 21 (XEN) > > > > > > > Processor #21 6:12 APIC version 21 > > > > > > > (XEN) IOAPIC[0]: apic_id 8, version > > > > > > > 32, > > > > address > > > > > > 0xfec00000, GSI > > > > > > > > > 0-23 > > > > > > > > > > > > (XEN) IOAPIC[1]: apic_id 9, version > > > > > > > 32, > > > > address > > > > > > 0xfec90000, GSI > > > > > > > > > 24-47 > > > > > > > > > > > > (XEN) Enabling APIC mode: Phys. > > > > > > > Using 2 > > > > I/O > > > > > APICs > > > > > > > > > > (XEN) Intel VT-d DMAR tables have been > > > > parsed. > > > > > > > > > (XEN) Using scheduler: SMP Credit > > > > Scheduler > > > > > (credit) > > > > > > > > > > (XEN) Detected 3200.207 MHz processor. > > > > > > > (XEN) VMX: Supported advanced > > > > > > > features: (XEN) - APIC MMIO access > > > > > > > virtualisation (XEN) - APIC TPR > > > > > > > shadow > > > > > > > (XEN) - Extended Page Tables (EPT) > > > > > > > (XEN) - Virtual-Processor Identifiers > > > > (VPID) > > > > > > > > > (XEN) - Virtual NMI > > > > > > > (XEN) - MSR direct-access bitmap > > > > > > > (XEN) VMX: EPT is available. > > > > > > > (XEN) VMX: VPID is available. > > > > > > > (XEN) HVM: VMX enabled > > > > > > > (XEN) HVM: Hardware Assisted Paging > > > > detected. > > > > > > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 1/2 eip 88000 > > > > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 2/4 eip 88000 > > > > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 3/16 eip 88000 > > > > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 4/18 eip 88000 > > > > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 5/20 eip 88000 > > > > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 6/1 eip 88000 > > > > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 7/3 eip 88000 > > > > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 8/5 eip 88000 > > > > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 9/17 eip 88000 > > > > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 10/19 eip > > > > > > > 88000 (XEN) CPU10: Intel Genuine > > > > > > > Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Booting processor 11/21 eip > > > > > > > 88000 (XEN) CPU11: Intel Genuine > > > > > > > Intel(R) CPU > > > > > > 000 > > > > > > > @ > > > > > > > > > 3.20GHz > > > > > > > > > > > stepping 00 > > > > > > > > > > > > > (XEN) Total of 12 processors > > > > > > > activated. (XEN) ENABLING IO-APIC IRQs > > > > > > > (XEN) -> Using new ACK method > > > > > > > (XEN) checking TSC synchronization > > > > > > > across > > > > 12 > > > > > CPUs: > > > > passed. > > > > > > > > > > > (XEN) Platform timer is 14.318MHz HPET > > > > > > > ?(XEN) Brought up 12 CPUs > > > > > > > (XEN) Intel VT-d Snoop Control > > > > > > > supported. (XEN) Intel VT-d DMA > > > > > > > Passthrough not > > > > supported. > > > > > > > > > (XEN) Intel VT-d Queued Invalidation > > > > supported. > > > > > > > > > (XEN) Intel VT-d Interrupt Remapping > > > > supported. > > > > > > > > > (XEN) I/O virtualisation enabled > > > > > > > (XEN) I/O virtualisation for PV guests > > > > disabled > > > > > > > > > (XEN) xenoprof: Initialization failed. > > > > Intel > > > > > processor > > > > > > > model 44 > > > > > > > > > for P6 > > > > > > > > > > > class family is not supported > > > > > > > > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > > > (XEN) Xen kernel: 64-bit, lsb, > > > > > > > compat32 (XEN) Dom0 kernel: 64-bit, > > > > > > > PAE, lsb, > > > > paddr > > > > > 0x1000000 -> > > > > > > > > 0x26bb000 > > > > > > > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Dom0 alloc.: > > > > > > 0000000064000000->0000000068000000 > > > > > > > > (404490 pages > > > > > > > > > > > to be allocated) > > > > > > > > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Loaded kernel: > > > > > > ffffffff81000000->ffffffff826bb000 > > > > > > > > > > (XEN) Init. ramdisk: > > > > > > ffffffff826bb000->ffffffff82d0d800 > > > > > > > > > > (XEN) Phys-Mach map: > > > > > > ffffffff82d0e000->ffffffff83044050 > > > > > > > > > > (XEN) Start info: > > > > > > ffffffff83045000->ffffffff830454b4 > > > > > > > > > > (XEN) Page tables: > > > > > > ffffffff83046000->ffffffff83063000 > > > > > > > > > > (XEN) Boot stack: > > > > > > ffffffff83063000->ffffffff83064000 > > > > > > > > > > (XEN) TOTAL: > > > > > > ffffffff80000000->ffffffff83400000 > > > > > > > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > > > (XEN) Xen trace buffers: disabled > > > > > > > (XEN) Std. Loglevel: Errors and > > > > > > > warnings (XEN) Guest Loglevel: Nothing > > > > (Rate-limited: > > > Errors and > > > > > > > > warnings) > > > > > > > > > > > > (XEN) Xen is relinquishing VGA > > > > > > > console. (XEN) *** Serial input -> > > > > > > > DOM0 (type > > > > 'CTRL-a' > > > > > three > > > > > > > times to > > > > > > > > > switch > > > > > > > > > > > input to Xen) > > > > > > > > > > > > > (XEN) Freed 128kB init memory. > > > > > > > mapping kernel into physical memory > > > > > > > Xen: setup ISA identity maps > > > > > > > about to get started... > > > > > > > Initializing cgroup subsys cpuset > > > > > > > Initializing cgroup subsys cpu > > > > > > > Linux version 2.6.32.9 > > > > > > (kishore@xxxxxxxxxxxxxxxxxxxxx) > > > > > > > (gcc > > > > > > > > > version > > > > > > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 > > > > > > SMP > > > > Mon Mar > > > > > 15 > > > > > > > 15:16:28 PDT > > > > > > > > > 2010 > > > > > > > > > > > > Command line: ro > > > > root=/dev/VolGroup01/LogVol00 > > > > > > console=hvc0 > > > > > > > > > > earlyprintk=xen nomodeset > > > > > > > > > > > > > KERNEL supported cpus: > > > > > > > Intel GenuineIntel > > > > > > > AMD AuthenticAMD > > > > > > > Centaur CentaurHauls > > > > > > > BIOS-provided physical RAM map: > > > > > > > Xen: 0000000000000000 - > > > > > > > 000000000009d000 > > > > > > (usable) > > > > > > > > > > Xen: 000000000009d000 - > > > > > > > 0000000000100000 > > > > > > (reserved) > > > > > > > > > > Xen: 0000000000100000 - > > > > > > > 0000000066c0a000 > > > > > > (usable) > > > > > > > > > > Xen: 000000006d597000 - > > > > > > > 000000006d686000 > > > > > > (reserved) > > > > > > > > > > Xen: 000000006f598000 - > > > > > > > 000000006f59a000 > > > > > > (reserved) > > > > > > > > > > Xen: 000000006f59a000 - > > > > > > > 000000006f5af000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > Xen: 000000006f5af000 - > > > > > > > 000000006f5d9000 > > > > > > (reserved) > > > > > > > > > > Xen: 000000006f5d9000 - > > > > > > > 000000006f5f9000 > > > > (ACPI > > > > > data) > > > > > > > > > > Xen: 000000006f5f9000 - > > > > > > > 000000006f6df000 > > > > (ACPI > > > > > NVS) > > > > > > > > > > Xen: 000000006f6df000 - > > > > > > > 000000006f700000 > > > > (ACPI > > > > > data) > > > > > > > > > > Xen: 000000006f700000 - > > > > > > > 0000000080000000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000a0000000 - > > > > > > > 00000000b0000000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000fc000000 - > > > > > > > 00000000fd000000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000fed1c000 - > > > > > > > 00000000fed20000 > > > > > > (reserved) > > > > > > > > > > Xen: 00000000ffc00000 - > > > > > > > 0000000100000000 > > > > > > (reserved) > > > > > > > > > > bootconsole [xenboot0] enabled > > > > > > > DMI 2.4 present. > > > > > > > last_pfn = 0x66c0a max_arch_pfn = > > > > 0x400000000 > > > > > > > > > init_memory_mapping: > > > > > > 0000000000000000-0000000066c0a000 > > > > > > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 > > > > INTEL ) > > > > > > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > > 01000013) > > > > > > > > > > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 > > > > INTEL > > > > > THRLY > > > > > > > 00000003 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > > > ACPI: APIC 000000006f6f4000 001CC (v02 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: HPET 000000006f6f2000 00038 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000000 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 > > > > INTEL > > > > > SSDT PM > > > > > > > 00004000 > > > > > > > > > INTL > > > > > > > > > > > 20061109) > > > > > > > > > > > > > ACPI: 000000006f6ee000 001D0 (v01 > > > > INTEL > > > > > THRLY > > > > > > > 00000001 > > > > > > > > > MSFT > > > > > > > > > > > 0100000D) > > > > > > > > > > > > > No NUMA configuration found > > > > > > > Faking a node at > > > > > > 0000000000000000-0000000066c0a000 > > > > > > > > > > Bootmem setup node 0 > > > > > > 0000000000000000-0000000066c0a000 > > > > > > > > > > NODE_DATA [0000000000008000 - > > > > 000000000001ffff] > > > > > > > > > bootmap [0000000000020000 - > > > > 000000000002cd87] > > > > > pages d > > > > > > > > > > (9 early reservations) ==> bootmem > > > > [0000000000 - > > > > > > 0066c0a000] > > > > > > > > > > > #0 [0000000000 - 0000001000] BIOS > > > > > > > data > > > > page > > > > > ==> > > > > > > > [0000000000 > > > > > > > > > - > > > > > > > > > > > 0000001000] > > > > > > > > > > > > > #1 [0003046000 - 0003063000] XEN > > > > PAGETABLES > > > > > ==> > > > > > > > [0003046000 > > > > > > > > > - > > > > > > > > > > > 0003063000] > > > > > > > > > > > > > #2 [0000006000 - 0000008000] > > > > TRAMPOLINE > > > > > ==> > > > > > > > [0000006000 > > > > > > > > > - > > > > > > > > > > > 0000008000] > > > > > > > > > > > > > #3 [0001000000 - 000269ae98] TEXT > > > > DATA BSS > > > > > ==> > > > > > > > [0001000000 > > > > > > > > > - > > > > > > > > > > > 000269ae98] > > > > > > > > > > > > > #4 [00026bb000 - 0002d0d800] > > > > RAMDISK > > > > > ==> > > > > > > > [00026bb000 > > > > > > > > > - > > > > > > > > > > > 0002d0d800] > > > > > > > > > > > > > #5 [0002d0e000 - 0003046000] XEN > > > > > > > START > > > > INFO > > > > > ==> > > > > > > > [0002d0e000 > > > > > > > > > - > > > > > > > > > > > 0003046000] > > > > > > > > > > > > > #6 [000269b000 - 000269b011] > > > > BRK > > > > > ==> > > > > > > > [000269b000 > > > > > > > > > - > > > > > > > > > > > 000269b011] > > > > > > > > > > > > > #7 [0000100000 - 000041a000] > > > > PGTABLE > > > > > ==> > > > > > > > [0000100000 > > > > > > > > > - > > > > > > > > > > > 000041a000] > > > > > > > > > > > > > #8 [0000001000 - 0000001030] > > > > > > > ACPI > > > > SLIT > > > > > ==> > > > > > > > [0000001000 > > > > > > > > > - > > > > > > > > > > > 0000001030] > > > > > > > > > > > > > found SMP MP-table at > > > > > > > [ffff8800000fd750] > > > > fd750 > > > > > > > > > Zone PFN ranges: > > > > > > > DMA 0x00000000 -> 0x00001000 > > > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > > > Normal 0x00100000 -> 0x00100000 > > > > > > > Movable zone start PFN for each node > > > > > > > early_node_map[2] active PFN ranges > > > > > > > 0: 0x00000000 -> 0x0000009d > > > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > > > ACPI: LAPIC (acpi_id[0x00] > > > > > > > lapic_id[0x00] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x01] > > > > > > > lapic_id[0x02] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x02] > > > > > > > lapic_id[0x04] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x03] > > > > > > > lapic_id[0x10] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x04] > > > > > > > lapic_id[0x12] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x05] > > > > > > > lapic_id[0x14] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x06] > > > > > > > lapic_id[0x01] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x07] > > > > > > > lapic_id[0x03] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x08] > > > > > > > lapic_id[0x05] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x09] > > > > > > > lapic_id[0x11] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0a] > > > > > > > lapic_id[0x13] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0b] > > > > > > > lapic_id[0x15] > > > > > > enabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0c] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0d] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0e] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x0f] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x10] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x11] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x12] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x13] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x14] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x15] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x16] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC (acpi_id[0x17] > > > > > > > lapic_id[0xff] > > > > > > disabled) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high > > > > > > > level > > > > > > lint[0x1]) > > > > > > > > > > ACPI: IOAPIC (id[0x08] > > > > > > > address[0xfec00000] > > > > > > gsi_base[0]) > > > > > > > > > > IOAPIC[0]: apic_id 8, version 0, > > > > > > > address > > > > > > 0xfec00000, GSI > > > > > > > 0-0 > > > > > > > > > > > ACPI: IOAPIC (id[0x09] > > > > > > > address[0xfec90000] > > > > > > gsi_base[24]) > > > > > > > > > > IOAPIC[1]: apic_id 9, version 0, > > > > > > > address > > > > > > 0xfec90000, GSI > > > > > > > 24-24 > > > > > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > > > global_irq 2 > > > > > dfl dfl) > > > > > > > > > > ERROR: Unable to locate IOAPIC for GSI > > > > > > > 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > > > global_irq 9 > > > > > high > > > > > > > level) > > > > > > > > > > > ERROR: Unable to locate IOAPIC for GSI > > > > > > > 9 Using ACPI (MADT) for SMP > > > > > > > configuration > > > > > > information > > > > > > > > > > ACPI: HPET id: 0x8086a401 base: > > > > > > > 0xfed00000 SMP: Allowing 12 CPUs, 0 > > > > > > > hotplug CPUs PM: Registered nosave > > > > > > > memory: > > > > 000000000009d000 - > > > > > > > 0000000000100000 > > > > > > > > > > > > Allocating PCI resources starting at > > > > b0000000 > > > > > (gap: > > > > > b0000000:4c000000) > > > > > > > > > > > > Booting paravirtualized kernel on Xen > > > > > > > Xen version: 3.4.3-rc4-pre > > > > > > > (preserve-AD) > > > > (dom0) > > > > > > > > > NR_CPUS:512 nr_cpumask_bits:512 > > > > nr_cpu_ids:12 > > > > > > nr_node_ids:1 > > > > > > > > > > > PERCPU: Embedded 478 pages/cpu > > > > @ffff880005ebc000 > > > > > > s1928024 r8192 > > > > > > > > > d21672 > > > > > > > > > > > u1957888 > > > > > > > > > > > > > pcpu-alloc: s1928024 r8192 d21672 > > > > > > > u1957888 > > > > > > > > alloc=478*4096 > > > > > > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] > > > > > > > 03 > > > > [0] 04 > > > > > [0] 05 > > > > > > > [0] 06 > > > > > > > > > [0] 07 > > > > > > > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] > > > > > > > 11 Xen: using vcpu_info placement > > > > > > > Built 1 zonelists in Node order, > > > > > > > mobility > > > > > > grouping on. > > > > > > > Total > > > > > > > > > pages: > > > > > > 409291 > > > > > > > > > > > > > Policy zone: DMA32 > > > > > > > Kernel command line: ro > > > > > > root=/dev/VolGroup01/LogVol00 > > > > > > > > console=hvc0 > > > > > > > > > > > earlyprintk=xen nomodeset > > > > > > > > > > > > > PID hash table entries: 4096 (order: > > > > > > > 3, > > > > 32768 > > > > > bytes) > > > > > > > > > > Initializing CPU#0 > > > > > > > DMA: Placing 64MB software IO TLB > > > > > > > between > > > > > > > > ffff880007525000 - > > > > > > > > > > ffff88000b525000 > > > > > > > > > > > > > DMA: software IO TLB at phys 0x7525000 > > > > > > > - > > > > > > 0xb525000 > > > > > > > > > > xen_swiotlb_fixup: > > > > > > > buf=ffff880007525000 > > > > > > size=67108864 > > > > > > > > > > xen_swiotlb_fixup: > > > > > > > buf=ffff88000b585000 > > > > > > size=32768 > > > > > > > > > > Memory: 1514268k/1683496k available > > > > > > > (4654k > > > > kernel > > > > > code, > > > > > > > 396k > > > > > > > > > absent, > > > > > > > > > > > 168832k reserved, 3443k data, 3396k > > > > > > init) > > > > > > > > > > > > > SLUB: Genslabs=14, HWalign=64, > > > > > > > Order=0-3, > > > > > > MinObjects=0, > > > > > > > > CPUs=12, > > > > > > > > > > > Nodes=1 > > > > > > > > > > > > > Hierarchical RCU implementation. > > > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > > > Already setup the GSI :0 > > > > > > > Already setup the GSI :1 > > > > > > > Already setup the GSI :2 > > > > > > > Already setup the GSI :3 > > > > > > > Already setup the GSI :4 > > > > > > > Already setup the GSI :5 > > > > > > > Already setup the GSI :6 > > > > > > > Already setup the GSI :7 > > > > > > > Already setup the GSI :8 > > > > > > > Already setup the GSI :9 > > > > > > > Already setup the GSI :10 > > > > > > > Already setup the GSI :11 > > > > > > > Already setup the GSI :12 > > > > > > > Already setup the GSI :13 > > > > > > > Already setup the GSI :14 > > > > > > > Already setup the GSI :15 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > > > global_irq 2 > > > > > dfl dfl) > > > > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > > > global_irq 9 > > > > > high > > > > > > > level) > > > > > > > > > > > xen: sci override: source_irq=9 > > > > global_irq=9 > > > > > trigger=c > > > > > > > > polarity=1 > > > > > > > > > > > > xen_allocate_pirq: returning irq 9 for > > > > > > > gsi > > > > 9 > > > > > > > > > Already setup the GSI :9 > > > > > > > xen: acpi sci 9 > > > > > > > Console: colour VGA+ 80x25 > > > > > > > console [hvc0] enabled, bootconsole > > > > disabled > > > > > console > > > > > > > [hvc0] > > > > > > > > > enabled, > > > > > > > > > > > bootconsole disabled > > > > > > > > > > > > > Lock dependency validator: Copyright > > > > > > > (c) > > > > 2006 Red > > > > > Hat, > > > > > > > Inc., > > > > > > > > > Ingo > > > > > > > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 > > > > > > ... > > > > > > MAX_LOCK_DEPTH: > > > > > 48 > > > > > > > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > > > > > > CLASSHASH_SIZE: > > > > > 4096 ... > > > > > > > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > > > > > > MAX_LOCKDEP_CHAINS: > > > > 32768 > > > > > > > > > ... > > > > > > > > > > > CHAINHASH_SIZE: 16384 memory > > > > > > used > > > > by lock > > > > > > dependency > > > > > > > > > info: > > > > > > 6367 kB per task-struct memory > > > > > > footprint: > > > > 2688 > > > > > bytes > > > > > > > allocated > > > > > > > > > 17039360 > > > > > > > > > > > bytes of page_cgroup please try > > > > > > 'cgroup_disable=memory' > > > > > > > option if > > > > > > > > > you > > > > > > > > > > > don't want memory cgroups installing Xen > > > > timer for > > > > > CPU 0 > > > > > > > Detected > > > > > > > > > > 3200.206 MHz processor. Calibrating > > > > > > delay > > > > loop > > > > > (skipped), > > > > > > > value > > > > > > > > > > calculated using timer frequency.. > > > > > > 6400.41 > > > > BogoMIPS > > > > > > (lpj=3200206) > > > > > > > > > > Security Framework initialized SELinux: > > > > > > Initializing. > > > > > > > Dentry > > > > > > > > > cache hash > > > > > > > > > > > table entries: 262144 (order: 9, 2097152 > > > > bytes) > > > > > > Inode-cache hash > > > > > > > > > table > > > > > > > > > > > entries: 131072 (order: 8, 1048576 > > > > > > bytes) > > > > > > Mount-cache hash > > > > > > > table > > > > > > > > > > entries: 256 Initializing cgroup subsys > > > > > > ns > > > > > > Initializing > > > > > > > cgroup > > > > > > > > > subsys > > > > > > > > > > > cpuacct Initializing cgroup subsys > > > > > > memory > > > > > > Initializing > > > > > > > cgroup > > > > > > > > > subsys > > > > > > > > > > > devices Initializing cgroup subsys > > > > > > freezer > > > > > > Initializing > > > > > > > cgroup > > > > > > > > > subsys > > > > > > > > > > > net_cls CPU: L1 I cache: 32K, L1 D > > > > > > cache: > > > > 32K CPU: > > > L2 > > > > > > > cache: 256K > > > > > > > > > CPU: > > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 > > > > > > CPU: > > > > > > Unsupported > > > > > > > number of > > > > > > > > > siblings > > > > > > > > > > > 32 Performance Events: unsupported p6 > > > > > > CPU > > > > model 44 > > > > > no PMU > > > > > > > driver, > > > > > > > > > > software events only. lockdep: fixing up > > > > > > alternatives. SMP > > > > > > > > alternatives: > > > > > > switching to UP code ACPI: Core revision > > > > 20090903 > > > > > ftrace: > > > > > converting > > > > > > > > > > > mcount calls to 0f 1f 44 00 00 ftrace: > > > > allocating > > > > > 27971 > > > > > > > entries > > > > > > > > > in 110 > > > > > > > > > > > pages installing Xen timer for CPU 1 > > > > lockdep: > > > fixing up > > > > > > > > alternatives. > > > > > > > > > > > SMP alternatives: switching to SMP code > > > > > > Initializing CPU#1 > > > > > > > CPU: > > > > > L1 I > > > > > > > > > > > cache: 32K, L1 D cache: 32K CPU: L2 > > > > > > cache: > > > > 256K > > > > > CPU: L3 > > > > > > > cache: > > > > > 12288K > > > > > > > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported > > > > > > number > > > > of > > > > > siblings 32 > > > > > > > > installing > > > > > > > > > > > Xen timer for CPU 2 Initializing CPU#2 > > > > > > CPU: > > > > L1 I > > > > > cache: > > > > 32K, L1 D > > > > > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > > > 12288K CPU > > > > > 2/0x0 -> > > > > > > > Node 0 > > > > > > > > > CPU: > > > > > > Unsupported number of siblings 32 > > > > > > installing > > > > Xen > > > > > timer for > > > > > > > CPU 3 > > > > > > > > > > Initializing CPU#3 CPU: L1 I cache: 32K, > > > > > > L1 > > > > D > > > > > cache: 32K > > > > > > > CPU: L2 > > > > > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> > > > > > > Node > > > > 0 CPU: > > > > Unsupported > > > > > > > > > number > > > > > > > > > > > of siblings 32 installing Xen timer for > > > > > > CPU > > > > 4 > > > > > Initializing > > > > > > > CPU#4 > > > > > > > > > CPU: L1 > > > > > > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > > > > > > cache: > > > > 256K > > > > > CPU: L3 > > > > > > > cache: > > > > > 12288K > > > > > > > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported > > > > > > number > > > > of > > > > > siblings 32 > > > > > > > > installing > > > > > > > > > > > Xen timer for CPU 5 Initializing CPU#5 > > > > > > CPU: > > > > L1 I > > > > > cache: > > > > 32K, L1 D > > > > > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > > > 12288K CPU > > > > > 5/0x0 -> > > > > > > > Node 0 > > > > > > > > > CPU: > > > > > > Unsupported number of siblings 32 > > > > > > installing > > > > Xen > > > > > timer for > > > > > > > CPU 6 > > > > > > > > > > Initializing CPU#6 CPU: L1 I cache: 32K, > > > > > > L1 > > > > D > > > > > cache: 32K > > > > > > > CPU: L2 > > > > > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> > > > > > > Node > > > > 0 CPU: > > > > Unsupported > > > > > > > > > number > > > > > > > > > > > of siblings 32 installing Xen timer for > > > > > > CPU > > > > 7 > > > > > Initializing > > > > > > > CPU#7 > > > > > > > > > CPU: L1 > > > > > > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > > > > > > cache: > > > > 256K > > > > > CPU: L3 > > > > > > > cache: > > > > > 12288K > > > > > > > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported > > > > > > number > > > > of > > > > > siblings 32 > > > > > > > > installing > > > > > > > > > > > Xen timer for CPU 8 Initializing CPU#8 > > > > > > CPU: > > > > L1 I > > > > > cache: > > > > 32K, L1 D > > > > > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 cache: > > > > 12288K CPU > > > > > 8/0x0 -> > > > > > > > Node 0 > > > > > > > > > CPU: > > > > > > Unsupported number of siblings 32 > > > > > > installing > > > > Xen > > > > > timer for > > > > > > > CPU 9 > > > > > > > > > > Initializing CPU#9 CPU: L1 I cache: 32K, > > > > > > L1 > > > > D > > > > > cache: 32K > > > > > > > CPU: L2 > > > > > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> > > > > > > Node > > > > 0 CPU: > > > > Unsupported > > > > > > > > > number > > > > > > > > > > > of siblings 32 installing Xen timer for > > > > > > CPU > > > > 10 > > > > > > Initializing > > > > > > > > > CPU#10 CPU: > > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 > > > > cache: > > > 256K CPU: > > > > L3 > > > > > > > > > cache: > > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: > > > > > > Unsupported > > > > number > > > > > of > > > > > > > siblings > > > > > > > > > 32 > > > > > > > > > > > installing Xen timer for CPU 11 > > > > > > Initializing > > > > CPU#11 > > > > > CPU: > > > > L1 I > > > > > > > > > cache: > > > > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K > > > > CPU: L3 > > > > > cache: > > > > 12288K > > > > > > > > > CPU > > > > > > > > > > > 11/0x0 -> Node 0 CPU: Unsupported number > > > > > > of > > > > > > siblings 32 > > > > > > > Brought > > > > > > > > > up 12 > > > > > > > > > > > CPUs Grant table initialized regulator: > > > > > > core > > > > > > version 0.5 > > > > > > > Time: > > > > > 14:45:00 > > > > > > > > > > > Date: 03/16/10 NET: Registered protocol > > > > family 16 > > > > > > > xenbus_probe_init ok > > > > > > > > > > > ACPI FADT declares the system doesn't > > > > support PCIe > > > > > ASPM, > > > > > > > so > > > > > > > > > disable it > > > > > > > > > > > ACPI: bus type pci registered PCI: MCFG > > > > > > configuration 0: > > > > base > > > > > > > > > a0000000 > > > > > > > > > > > segment 0 buses 0 - 255 PCI: MCFG area > > > > > > at > > > > a0000000 > > > > > > reserved in > > > > > > > > > E820 PCI: > > > > > > Using MMCONFIG at a0000000 - afffffff > > > > > > PCI: > > > > Using > > > > > > configuration > > > > > > > > > type 1 > > > > > > > > > > > for base access bio: create slab <bio-0> > > > > > > at > > > > 0 ACPI > > > > > Error: > > > > Field > > > > > > > > > [CPB3] > > > > > > > > > > > at 96 exceeds Buffer [NULL] size 64 > > > > > > (bits) > > > > > > > > > > (20090903/dsopcode-596) ACPI > > > > > > > > > > > Error (psparse-0537): Method > > > > > > parse/execution > > > > failed > > > > > > [\_SB_._OSC] > > > > > > > > > (Node > > > > > > > > > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT > > > > > > ACPI: > > > > > > Interpreter > > > > > > > enabled > > > > > > > > > ACPI: > > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using > > > > > > IOAPIC > > > > for > > > > > interrupt > > > > > > > > routing ACPI > > > > > > > > > > > Warning: Incorrect checksum in table [ > > > > > > ] > > > > - 97, > > > > > should > > > > > > > be DB > > > > > > > > > > (20090903/tbutils-314) ACPI: No dock > > > > > > devices > > > > found. > > > > > ACPI: > > > > PCI > > > > > > > > > Root > > > > > > > > > > > Bridge [PCI0] (0000:00) pci > > > > > > 0000:00:01.0: > > > > PME# > > > > > supported > > > > > > > from D0 > > > > > > > > > D3hot > > > > > > > > > > > D3cold pci 0000:00:01.0: PME# disabled > > > > > > pci > > > > > > 0000:00:02.0: > > > > PME# > > > > > > > > > supported > > > > > > > > > > > from D0 D3hot D3cold pci 0000:00:02.0: > > > > > > PME# > > > > > > disabled pci > > > > > > > > 0000:00:03.0: > > > > > > PME# supported from D0 D3hot D3cold pci > > > > > > 0000:00:03.0: PME# > > > > > > > > disabled pci > > > > > > > > > > > 0000:00:04.0: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:04.0: PME# > > > > > > > > > > > disabled pci 0000:00:05.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:00:05.0: PME# disabled pci > > > > 0000:00:06.0: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:00:06.0: PME# > > > > > > disabled > > > > pci > > > > > > 0000:00:07.0: > > > > > PME# > > > > > > > > > > > supported from D0 D3hot D3cold pci > > > > 0000:00:07.0: > > > PME# > > > > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:08.0: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:08.0: PME# > > > > > > > > > > > disabled pci 0000:00:09.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:00:09.0: PME# disabled pci > > > > 0000:00:0a.0: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:00:0a.0: PME# > > > > > > disabled > > > > pci > > > > > > 0000:00:13.0: > > > > > PME# > > > > > > > > > > > supported from D0 D3hot D3cold pci > > > > 0000:00:13.0: > > > PME# > > > > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:1a.7: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:1a.7: PME# > > > > > > > > > > > disabled pci 0000:00:1c.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:00:1c.0: PME# disabled pci > > > > 0000:00:1c.4: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:00:1c.4: PME# > > > > > > disabled > > > > pci > > > > > > 0000:00:1c.5: > > > > > PME# > > > > > > > > > > > supported from D0 D3hot D3cold pci > > > > 0000:00:1c.5: > > > PME# > > > > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:1d.7: PME# supported from D0 > > > > > > D3hot > > > > D3cold > > > > > pci > > > > > > > > 0000:00:1d.7: PME# > > > > > > > > > > > disabled pci 0000:00:1f.0: quirk: region > > > > 0400-047f > > > > > claimed > > > > > > > by > > > > > > > > > ICH6 > > > > > > > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: > > > > region > > > > > 0500-053f > > > > > > > claimed > > > > > > > > > by ICH6 > > > > > > > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic > > > > > > IO > > > > decode 1 > > > > > PIO at > > > > > > > 0680 > > > > > > > > > (mask > > > > > > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic > > > > > > IO > > > > decode > > > > > 2 PIO > > > > > > > at 0ca0 > > > > > > > > > (mask > > > > > > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic > > > > > > IO > > > > decode > > > > > 3 PIO > > > > > > > at 0600 > > > > > > > > > (mask > > > > > > > > > > > 001f) pci 0000:00:1f.2: PME# supported > > > > > > from > > > > D3hot > > > > > pci > > > > > > > > 0000:00:1f.2: PME# > > > > > > > > > > > disabled pci 0000:01:00.0: PME# > > > > > > supported > > > > from D0 > > > > > D3hot > > > > > > > D3cold > > > > > > > > > pci > > > > > > > > > > > 0000:01:00.0: PME# disabled pci > > > > 0000:01:00.1: PME# > > > > > > supported from > > > > > > > > > D0 > > > > > > > > > > > D3hot D3cold pci 0000:01:00.1: PME# > > > > > > disabled > > > > pci > > > > > > 0000:0c:00.0: > > > > > disabling > > > > > > > > > > > ASPM on pre-1.1 PCIe device. You can > > > > > > enable > > > > it > > > > > with > > > > > > > > 'pcie_aspm=force' > > > > > > > > > > > pci 0000:00:1e.0: transparent bridge > > > > > > ACPI: > > > > PCI Root > > > > > Bridge > > > > > > > [PCI1] > > > > > > > > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] > > > > (0000:ff) > > > > > ACPI: PCI > > > > > > > > Interrupt > > > > > > > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 > > > > > > 14 > > > > 15) > > > > > ACPI: PCI > > > > > > > > Interrupt Link > > > > > > > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 > > > > > > 15) > > > > ACPI: PCI > > > > > > Interrupt > > > > > > > > > Link > > > > > > > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 > > > > > > 15) > > > > ACPI: PCI > > > > > > Interrupt > > > > > > > > > Link > > > > > > > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 > > > > > > 15) > > > > ACPI: PCI > > > > > > Interrupt > > > > > > > > > Link > > > > > > > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) > > > > > > *0, > > > > > > disabled. > > > > > > > ACPI: PCI > > > > > > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 > > > > > > 10 > > > > *11 12 > > > > > 14 15) > > > > > > > ACPI: > > > > > PCI > > > > > > > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 > > > > > > 10 > > > > 11 12 14 > > > > > 15) > > > > > > > *0, > > > > > > > > > disabled. > > > > > > > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 > > > > > > 4 5 > > > > 6 7 9 > > > > > *10 11 > > > > > > > 12 14 > > > > > > > > > 15) > > > > > > > > > > > xenbus_probe_backend_init bus registered > > > > > > ok > > > > > > > > > > xenbus_probe_frontend_init > > > > > > > > > > > bus registered ok xen_balloon: > > > > > > Initialising > > > > balloon > > > > > driver > > > > > > > with > > > > > > > > > page > > > > > > > > > > > order 0. vgaarb: device added: > > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > > > > > > vgaarb: > > > > > loaded > > > > > > > > > > > SCSI subsystem initialized usbcore: > > > > registered new > > > > > > interface > > > > > > > > > driver > > > > > > > > > > > usbfs usbcore: registered new interface > > > > driver hub > > > > > > usbcore: > > > > > registered > > > > > > > > > > > new device driver usb PCI: Using ACPI > > > > > > for > > > > IRQ > > > > > routing > > > > > > > NetLabel: > > > > > > Initializing NetLabel: domain hash size > > > > > > = > > > > 128 > > > > > NetLabel: > > > > > protocols = > > > > > > > > > > > UNLABELED CIPSOv4 NetLabel: unlabeled > > > > traffic > > > > > allowed by > > > > > > > default > > > > > > > > > > Switching to clocksource xen kstop/0 > > > > > > used > > > > greatest > > > > > stack > > > > > > > depth: > > > > > 6568 > > > > > > > > > > > bytes left kstop/1 used greatest stack > > > > depth: 6536 > > > > > bytes > > > > > > > left > > > > > > > > > pnp: PnP > > > > > > > > > > > ACPI init ACPI: bus type pnp registered > > > > > > xen_allocate_pirq: > > > > > returning irq > > > > > > > > > > > 8 for gsi 8 Already setup the GSI :8 > > > > > > xen_allocate_pirq: > > > > returning > > > > > > > > > irq 13 > > > > > > > > > > > for gsi 13 Already setup the GSI :13 > > > > > > pnp: > > > > PnP ACPI: > > > found > > > > > > > 13 > > > > > > > > > devices > > > > > > > > > > > ACPI: ACPI bus type pnp unregistered > > > > > > system > > > > 00:07: > > > ioport > > > > > > > range > > > > > > > > > > 0x500-0x53f has been reserved system > > > > > > 00:07: > > > > ioport > > > > > range > > > > > > > > 0x400-0x47f has > > > > > > > > > > > been reserved system 00:07: ioport range > > > > > > 0x800-0x81f has > > > > > > > been > > > > > > > > > reserved > > > > > > > > > > > system 00:07: ioport range 0x2f8-0x2ff > > > > > > has > > > > been > > > > > reserved > > > > > > > system > > > > > > > > > 00:07: > > > > > > iomem range 0xfed1c000-0xfed8bffe could > > > > > > not > > > > be > > > > > reserved > > > > > > > system > > > > > > > > > 00:07: > > > > > > iomem range 0xff000000-0xffffffff could > > > > > > not > > > > be > > > > > reserved > > > > > > > system > > > > > > > > > 00:07: > > > > > > iomem range 0xfee00000-0xfeefffff has > > > > > > been > > > > reserved > > > > > system > > > > > > > 00:07: > > > > > iomem > > > > > > > > > > > range 0xfe900000-0xfe90001f has been > > > > reserved > > > > > system > > > > > > > 00:07: iomem > > > > > > > > > range > > > > > > > > > > > 0xfea00000-0xfea0001f has been reserved > > > > system > > > > > 00:07: > > > > iomem range > > > > > > > > > > 0xfed1b000-0xfed1bfff has been reserved > > > > > > pci > > > > > > 0000:0c:00.0: > > > > BAR 6: > > > > > no > > > > > > > > > > > parent found for of device > > > > [0xffff0000-0xffffffff] > > > > > pci > > > > > > > > 0000:00:01.0: PCI > > > > > > > > > > > bridge, secondary bus 0000:01 pci > > > > 0000:00:01.0: > > > IO > > > > > > > window: > > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM > > > > window: > > > > > 0xb1900000-0xb19fffff pci > > > > > > > > > > > 0000:00:01.0: PREFETCH window: > > > > > > disabled > > > > pci > > > > > > 0000:00:02.0: PCI > > > > > > > > > bridge, > > > > > > > > > > > secondary bus 0000:02 pci 0000:00:02.0: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:02.0: MEM window: disabled pci > > > > > > 0000:00:02.0: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:03.0: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:03 pci > > > > > > > > > > > 0000:00:03.0: IO window: disabled pci > > > > > > 0000:00:03.0: > > > > MEM > > > > > > > > > window: > > > > > > disabled pci 0000:00:03.0: PREFETCH > > > > window: > > > disabled pci > > > > > > > > 0000:00:04.0: > > > > > > PCI bridge, secondary bus 0000:04 pci > > > > 0000:00:04.0: > > > IO > > > > > > > window: > > > > > > disabled pci 0000:00:04.0: MEM window: > > > > disabled > > > > > pci > > > > > > > > 0000:00:04.0: > > > > > > PREFETCH window: disabled pci > > > > > > 0000:00:05.0: > > > > PCI > > > > > bridge, > > > > > > > secondary > > > > > > > > > bus > > > > > > > > > > > 0000:05 pci 0000:00:05.0: IO window: > > > > disabled pci > > > > > > 0000:00:05.0: > > > > > MEM > > > > > > > > > > > window: disabled pci 0000:00:05.0: > > > > PREFETCH > > > > > window: > > > > disabled > > > > > > > > > pci > > > > > > > > > > > 0000:00:06.0: PCI bridge, secondary bus > > > > 0000:06 pci > > > > > > 0000:00:06.0: > > > > > IO > > > > > > > > > > > window: disabled pci 0000:00:06.0: MEM > > > > window: > > > disabled > > > > > > > pci > > > > > > > > > > 0000:00:06.0: PREFETCH window: > > > > > > disabled > > > > pci > > > > > > 0000:00:07.0: PCI > > > > > > > > > bridge, > > > > > > > > > > > secondary bus 0000:07 pci 0000:00:07.0: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:07.0: MEM window: disabled pci > > > > > > 0000:00:07.0: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:08.0: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:08 pci > > > > > > > > > > > 0000:00:08.0: IO window: disabled pci > > > > > > 0000:00:08.0: > > > > MEM > > > > > > > > > window: > > > > > > disabled pci 0000:00:08.0: PREFETCH > > > > window: > > > disabled pci > > > > > > > > 0000:00:09.0: > > > > > > PCI bridge, secondary bus 0000:09 pci > > > > 0000:00:09.0: > > > IO > > > > > > > window: > > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM > > > > window: > > > > > 0xb1b00000-0xb1cfffff pci > > > > > > > > > > > 0000:00:09.0: PREFETCH window: > > > > > > > > > > 0x000000b1d00000-0x000000b1efffff pci > > > > > > > > > > > 0000:00:0a.0: PCI bridge, secondary bus > > > > 0000:0a pci > > > > > > 0000:00:0a.0: > > > > > IO > > > > > > > > > > > window: disabled pci 0000:00:0a.0: MEM > > > > window: > > > disabled > > > > > > > pci > > > > > > > > > > 0000:00:0a.0: PREFETCH window: > > > > > > disabled > > > > pci > > > > > > 0000:00:1c.0: PCI > > > > > > > > > bridge, > > > > > > > > > > > secondary bus 0000:0b pci 0000:00:1c.0: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:1c.0: MEM window: disabled pci > > > > > > 0000:00:1c.0: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:1c.4: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:0c pci > > > > > > > > > > > 0000:00:1c.4: IO window: disabled pci > > > > > > 0000:00:1c.4: > > > > MEM > > > > > > > > > window: > > > > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: > > > > PREFETCH > > > > > window: > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > > > 0000:00:1c.5: > > > PCI > > > > > > > bridge, > > > > > > > > > > secondary bus 0000:0d pci 0000:00:1c.5: > > > > > > IO > > > > > > window: > > > > disabled pci > > > > > > > > > > 0000:00:1c.5: MEM window: disabled pci > > > > > > 0000:00:1c.5: > > > > PREFETCH > > > > > > > > > > window: disabled pci 0000:00:1e.0: PCI > > > > bridge, > > > > > secondary > > > > > > > bus > > > > > > > > > 0000:0e pci > > > > > > > > > > > 0000:00:1e.0: IO window: disabled pci > > > > > > 0000:00:1e.0: > > > > MEM > > > > > > > > > window: > > > > > > disabled pci 0000:00:1e.0: PREFETCH > > > > window: > > > disabled pci > > > > > > > > 0000:00:01.0: > > > > > > PCI INT A -> GSI 28 (level, low) -> IRQ > > > > > > 28 > > > > pci > > > > > > 0000:00:02.0: PCI > > > > > > > > > INT A > > > > > > > > > > > -> GSI 29 (level, low) -> IRQ 29 pci > > > > 0000:00:03.0: > > > PCI INT > > > > > > > A -> > > > > > > > > > GSI 24 > > > > > > > > > > > (level, low) -> IRQ 24 pci 0000:00:04.0: > > > > > > PCI > > > > INT A > > > > > -> GSI > > > > > > > 25 > > > > > > > > > (level, > > > > > > > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT > > > > > > A > > > > -> GSI > > > > > 26 > > > > > > > (level, low) > > > > > > > > > -> IRQ > > > > > > > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 > > > > (level, > > > > > low) -> > > > > > > > IRQ 27 > > > > > > > > > pci > > > > > > > > > > > 0000:00:07.0: PCI INT A -> GSI 30 > > > > > > (level, > > > > low) -> > > > > > IRQ 30 > > > > > > > pci > > > > > > > > > > 0000:00:08.0: PCI INT A -> GSI 31 > > > > > > (level, > > > > low) -> > > > > > IRQ 31 > > > > > > > pci > > > > > > > > > > 0000:00:09.0: PCI INT A -> GSI 32 > > > > > > (level, > > > > low) -> > > > > > IRQ 32 > > > > > > > pci > > > > > > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 > > > > > > (level, > > > > low) -> > > > > > IRQ 33 > > > > > > > pci > > > > > > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 > > > > > > (level, > > > > low) -> > > > > > IRQ 16 > > > > > > > > > xen_allocate_pirq: returning irq 16 for > > > > > > gsi > > > > 16 > > > > > Already > > > > > > > setup the > > > > > > > > > GSI :16 > > > > > > > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 > > > > (level, low) > > > > > -> IRQ > > > > > > > 16 pci > > > > > > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 > > > > > > (level, > > > > low) -> > > > > > IRQ 17 > > > > > > > NET: > > > > > Registered > > > > > > > > > > > protocol family 2 IP route cache hash > > > > > > table > > > > > > entries: 65536 > > > > > > > > (order: 7, > > > > > > > > > > > 524288 bytes) TCP established hash table > > > > entries: > > > 262144 > > > > > > > (order: > > > > > 10, > > > > > > > > > > > 4194304 bytes) TCP bind hash table > > > > > > entries: > > > > 65536 > > > > > (order: > > > > 10, > > > > > > > > > 4718592 > > > > > > > > > > > bytes) TCP: Hash tables configured > > > > (established > > > > > 262144 > > > > > > > bind > > > > > > > > > 65536) TCP > > > > > > > > > > > reno registered NET: Registered protocol > > > > family 1 > > > > > pci > > > > > > > > 0000:01:00.0: > > > > > > Disabling L0s pci 0000:01:00.1: > > > > > > Disabling > > > > L0s > > > > > Trying to > > > > > > > unpack > > > > > > > > > rootfs > > > > > > > > > > > image as initramfs... Freeing initrd > > > > > > memory: > > > > 6474k > > > > > freed > > > > > > > DMA-API: > > > > > > preallocated 32768 debug entries > > > > > > DMA-API: > > > > debugging > > > > > > enabled by > > > > > > > > > kernel > > > > > > > > > > > config PCI-DMA: Using software bounce > > > > buffering for > > > > > IO > > > > > > > (SWIOTLB) > > > > > > > > > DMA: > > > > > > Placing 64MB software IO TLB between > > > > > > ffff880007525000 - > > > > > > > > ffff88000b525000 > > > > > > > > > > > DMA: software IO TLB at phys 0x7525000 - > > > > 0xb525000 > > > > > audit: > > > > > initializing > > > > > > > > > > > netlink socket (disabled) type=2000 > > > > > > > > audit(1268750702.035:1): > > > > > initialized > > > > > > > > > > > HugeTLB registered 2 MB page size, > > > > pre-allocated 0 > > > > > pages > > > > > > > VFS: > > > > > Disk > > > > > > > > > > > quotas dquot_6.5.2 Dquot-cache hash > > > > > > table > > > > entries: > > > 512 > > > > > > > (order 0, > > > > > > > > > 4096 > > > > > > > > > > > bytes) msgmni has been set to 2970 > > > > cryptomgr_test > > > > > used > > > > > > > greatest > > > > > > > > > stack > > > > > > > > > > > depth: 5864 bytes left cryptomgr_test > > > > > > used > > > > greatest > > > > > stack > > > > > > > depth: > > > > > 5816 > > > > > > > > > > > bytes left alg: No test for stdrng > > > > > > (krng) > > > > Block > > > > > layer SCSI > > > > > > > > generic (bsg) > > > > > > > > > > > driver version 0.4 loaded (major 252) io > > > > scheduler > > > > > noop > > > > > > > > registered io > > > > > > > > > > > scheduler anticipatory registered io > > > > scheduler > > > > > deadline > > > > > > > > registered io > > > > > > > > > > > scheduler cfq registered (default) > > > > pci_hotplug: PCI > > > > > Hot > > > > > > > Plug PCI > > > > > > > > > Core > > > > > > > > > > > version: 0.5 pciehp 0000:00:09.0:pcie04: > > > > > > HPC > > > > > > vendor_id > > > > > > > 8086 > > > > > > > > > device_id > > > > > > > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI > > > > > > Express > > > > Hot Plug > > > > > > Controller > > > > > > > > > Driver > > > > > > > > > > > version: 0.4 acpiphp: ACPI Hot Plug PCI > > > > Controller > > > > > Driver > > > > > > > > version: 0.5 > > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > acpiphp_glue: Slot 2 already registered > > > > > > by > > > > another > > > > > hotplug > > > > > > > driver > > > > > > > > > > pci-stub: invalid id string "" input: > > > > > > Sleep > > > > Button > > > > > as > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > > > > > > ACPI: > > > > > Sleep > > > > > > > > > > > Button [SLPB] input: Power Button as > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > > > Power > > > > > > > Button > > > > > > > > > [PWRF] > > > > > > > > > > > registering netback hpet_acpi_add: no > > > > address or > > > > > irqs in > > > > > > > _CRS > > > > > > > > > > Non-volatile memory driver v1.3 Linux > > > > agpgart > > > > > interface > > > > > > > v0.103 > > > > > > > > > Serial: > > > > > > 8250/16550 driver, 4 ports, IRQ sharing > > > > enabled > > > > > > serial8250: ttyS1 > > > > > > > > > at I/O > > > > > > > > > > > 0x2f8 (irq = 3) is a 16550A brd: module > > > > loaded > > > > > loop: > > > > module > > > > > > > > > loaded > > > > > > > > > > > input: Macintosh mouse button emulation > > > > > > as > > > > > > > > > > /devices/virtual/input/input2 > > > > > > > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 > > > > (level, low) > > > > > -> IRQ > > > > > > > 19 > > > > > > > > > ahci > > > > > > > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 > > > > ports 3 > > > > > Gbps 0x3f > > > > > > > impl > > > > > > > > > SATA mode > > > > > > > > > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf > > > > > > pm > > > > led clo > > > > > pio > > > > > > > slum part > > > > > > > > > ccc > > > > > > > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 : > > > > > > ahci > > > > scsi3 : > > > ahci > > > > > > > scsi4 : > > > > > ahci > > > > > > > > > > > scsi5 : ahci ata1: SATA max UDMA/133 > > > > irq_stat > > > > > 0x00400040, > > > > > > > > connection > > > > > > > > > > > status changed irq 2996 ata2: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00180 irq 2996 ata3: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00200 irq 2996 ata4: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00280 irq 2996 ata5: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00300 irq 2996 ata6: SATA max > > > > UDMA/133 > > > > > abar > > > > > > > > m2048@0xb1a00000 > > > > > > > > > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: > > > > probed > > > > > ehci_hcd: > > > > USB 2.0 > > > > > > > > > > 'Enhanced' Host Controller (EHCI) Driver > > > > ehci_hcd > > > > > > 0000:00:1a.7: > > > > > PCI INT > > > > > > > > > > > C -> GSI 18 (level, low) -> IRQ 18 > > > > > > ehci_hcd > > > > > > 0000:00:1a.7: > > > > EHCI > > > > > > > > > Host > > > > > > > > > > > Controller ehci_hcd 0000:00:1a.7: new > > > > > > USB > > > > bus > > > > > registered, > > > > > > > > assigned bus > > > > > > > > > > > number 1 ehci_hcd 0000:00:1a.7: debug > > > > > > port 1 > > > > > > ehci_hcd > > > > > > > > 0000:00:1a.7: irq > > > > > > > > > > > 18, io mem 0xb1a02000 ehci_hcd > > > > > > 0000:00:1a.7: > > > > USB > > > > > 2.0 > > > > > > > started, > > > > > > > > > EHCI 1.00 > > > > > > > > > > > usb usb1: New USB device found, > > > > idVendor=1d6b, > > > > > > idProduct=0002 usb > > > > > > > > > usb1: > > > > > > New USB device strings: Mfr=3, > > > > > > Product=2, > > > > > > SerialNumber=1 > > > > > > > usb > > > > > > > > > usb1: > > > > > > Product: EHCI Host Controller usb usb1: > > > > > > Manufacturer: > > > > Linux > > > > > > > > > 2.6.32.9 > > > > > > > > > > > ehci_hcd usb usb1: SerialNumber: > > > > 0000:00:1a.7 usb > > > > > usb1: > > > > > configuration #1 > > > > > > > > > > > chosen from 1 choice hub 1-0:1.0: USB > > > > > > hub > > > > found hub > > > > > > 1-0:1.0: 6 > > > > > > > > > ports > > > > > > > > > > > detected ehci_hcd 0000:00:1d.7: PCI INT > > > > > > A -> > > > > GSI 23 > > > > > > (level, low) > > > > > > > > > -> IRQ > > > > > > > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host > > > > Controller > > > > > ehci_hcd > > > > > > > > 0000:00:1d.7: > > > > > > new USB bus registered, assigned bus > > > > > > number > > > > 2 > > > > > ehci_hcd > > > > > > > > 0000:00:1d.7: > > > > > > debug port 1 ehci_hcd 0000:00:1d.7: irq > > > > > > 23, > > > > io mem > > > > > > 0xb1a01000 > > > > > > > > > ehci_hcd > > > > > > > > > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > > > > > > usb > > > > usb2: > > > New USB > > > > > > > device > > > > > > > > > found, > > > > > > > > > > > idVendor=1d6b, idProduct=0002 usb usb2: > > > > > > New > > > > USB > > > > > device > > > > > > > strings: > > > > > Mfr=3, > > > > > > > > > > > Product=2, SerialNumber=1 usb usb2: > > > > > > Product: > > > > EHCI > > > > > Host > > > > > > > Controller > > > > > > > > > usb > > > > > > > > > > > usb2: Manufacturer: Linux 2.6.32.9 > > > > > > ehci_hcd > > > > usb > > > > > usb2: > > > > > SerialNumber: > > > > > > 0000:00:1d.7 usb usb2: configuration #1 > > > > chosen from > > > > > 1 > > > > > > > choice hub > > > > > > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 > > > > > > ports > > > > > > detected > > > > > > > ohci_hcd: > > > > > USB 1.1 > > > > > > > > > > > 'Open' Host Controller (OHCI) Driver > > > > uhci_hcd: USB > > > > > > Universal Host > > > > > > > > > > Controller Interface driver > > > > xen_allocate_pirq: > > > returning > > > > > > > irq 16 > > > > > > > > > for gsi > > > > > > > > > > > 16 Already setup the GSI :16 uhci_hcd > > > > 0000:00:1a.0: > > > PCI > > > > > > > INT A -> > > > > > > > > > GSI 16 > > > > > > > > > > > (level, low) -> IRQ 16 uhci_hcd > > > > 0000:00:1a.0: UHCI > > > > > Host > > > > > > > > Controller > > > > > > > > > > > uhci_hcd 0000:00:1a.0: new USB bus > > > > registered, > > > > > assigned > > > > > > > bus > > > > > > > > > number 3 > > > > > > > > > > > uhci_hcd 0000:00:1a.0: irq 16, io base > > > > 0x000020e0 > > > > > usb > > > > > > > usb3: New > > > > > > > > > USB > > > > > > > > > > > device found, idVendor=1d6b, > > > > > > idProduct=0001 > > > > usb > > > > > usb3: New > > > > > > > USB > > > > > > > > > device > > > > > > > > > > > strings: Mfr=3, Product=2, > > > > > > SerialNumber=1 > > > > usb usb3: > > > > Product: UHCI > > > > > > > > > Host > > > > > > > > > > > Controller usb usb3: Manufacturer: Linux > > > > 2.6.32.9 > > > > > uhci_hcd > > > > > > > usb > > > > > > > > > usb3: > > > > > > SerialNumber: 0000:00:1a.0 usb usb3: > > > > configuration > > > > > #1 > > > > > > > chosen from > > > > > > > > > 1 > > > > > > > > > > > choice hub 3-0:1.0: USB hub found hub > > > > 3-0:1.0: 2 > > > > > ports > > > > > > > detected > > > > > > > > > uhci_hcd > > > > > > > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 > > > > > > (level, > > > > low) -> > > > > > IRQ 21 > > > > > > > uhci_hcd > > > > > > > > > > 0000:00:1a.1: UHCI Host Controller > > > > > > uhci_hcd > > > > > > 0000:00:1a.1: > > > > new USB > > > > > > > > > bus > > > > > > > > > > > registered, assigned bus number 4 > > > > > > uhci_hcd > > > > > > 0000:00:1a.1: > > > > irq 21, > > > > > > > > > io base > > > > > > > > > > > 0x000020c0 usb usb4: New USB device > > > > > > found, > > > > > > idVendor=1d6b, > > > > > > > > idProduct=0001 > > > > > > > > > > > usb usb4: New USB device strings: Mfr=3, > > > > Product=2, > > > > > > > SerialNumber=1 usb > > > > > > > > > > > usb4: Product: UHCI Host Controller usb > > > > usb4: > > > > Manufacturer: Linux > > > > > > > > > > 2.6.32.9 uhci_hcd usb usb4: > > > > > > SerialNumber: > > > > > > 0000:00:1a.1 usb > > > > > > > usb4: > > > > > > configuration #1 chosen from 1 choice > > > > > > hub > > > > 4-0:1.0: > > > USB hub > > > > > > > found > > > > > > > > > hub > > > > > > > > > > > 4-0:1.0: 2 ports detected > > > > > > xen_allocate_pirq: > > > > > > returning irq > > > > > > > 19 for > > > > > > > > > gsi 19 > > > > > > > > > > > Already setup the GSI :19 uhci_hcd > > > > 0000:00:1a.2: > > > PCI INT D > > > > > > > -> GSI > > > > > > > > > 19 > > > > > > > > > > > (level, low) -> IRQ 19 uhci_hcd > > > > 0000:00:1a.2: UHCI > > > > > Host > > > > > > > > Controller > > > > > > > > > > > uhci_hcd 0000:00:1a.2: new USB bus > > > > registered, > > > > > assigned > > > > > > > bus > > > > > > > > > number 5 > > > > > > > > > > > uhci_hcd 0000:00:1a.2: irq 19, io base > > > > 0x000020a0 > > > > > usb > > > > > > > usb5: New > > > > > > > > > USB > > > > > > > > > > > device found, idVendor=1d6b, > > > > > > idProduct=0001 > > > > usb > > > > > usb5: New > > > > > > > USB > > > > > > > > > device > > > > > > > > > > > strings: Mfr=3, Product=2, > > > > > > SerialNumber=1 > > > > usb usb5: > > > > Product: UHCI > > > > > > > > > Host > > > > > > > > > > > Controller usb usb5: Manufacturer: Linux > > > > 2.6.32.9 > > > > > uhci_hcd > > > > > > > usb > > > > > > > > > usb5: > > > > > > SerialNumber: 0000:00:1a.2 usb usb5: > > > > configuration > > > > > #1 > > > > > > > chosen from > > > > > > > > > 1 > > > > > > > > > > > choice hub 5-0:1.0: USB hub found hub > > > > 5-0:1.0: 2 > > > > > ports > > > > > > > detected > > > > > > > > > > xen_allocate_pirq: returning irq 23 for > > > > > > gsi > > > > 23 > > > > > Already > > > > > > > setup the > > > > > > > > > GSI :23 > > > > > > > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI > > > > > > 23 > > > > (level, > > > > > low) -> > > > > > > > IRQ 23 > > > > > > > > > > uhci_hcd 0000:00:1d.0: UHCI Host > > > > > > Controller > > > > > > uhci_hcd > > > > > > > > 0000:00:1d.0: new > > > > > > > > > > > USB bus registered, assigned bus number > > > > > > 6 > > > > uhci_hcd > > > > > > 0000:00:1d.0: > > > > > irq 23, > > > > > > > > > > > io base 0x00002080 usb usb6: New USB > > > > > > device > > > > found, > > > > > > idVendor=1d6b, > > > > > > > > > > idProduct=0001 usb usb6: New USB device > > > > strings: > > > Mfr=3, > > > > > > > > Product=2, > > > > > > > > > > > SerialNumber=1 usb usb6: Product: UHCI > > > > > > Host > > > > > > Controller usb > > > > > > > usb6: > > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd > > > > > > usb > > > > usb6: > > > > SerialNumber: > > > > > > 0000:00:1d.0 usb usb6: configuration #1 > > > > chosen from > > > > > 1 > > > > > > > choice hub > > > > > > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 > > > > > > ports > > > > > > detected > > > > > > > > xen_allocate_pirq: > > > > > > returning irq 19 for gsi 19 Already > > > > > > setup > > > > the GSI > > > > > :19 > > > : > > > > uhci_hcd > > > > > > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 > > > > > > (level, > > > > low) -> > > > > > IRQ 19 > > > > > > > uhci_hcd > > > > > > > > > > 0000:00:1d.1: UHCI Host Controller > > > > > > uhci_hcd > > > > > > 0000:00:1d.1: > > > > new USB > > > > > > > > > bus > > > > > > > > > > > registered, assigned bus number 7 > > > > > > uhci_hcd > > > > > > 0000:00:1d.1: > > > > irq 19, > > > > > > > > > io base > > > > > > > > > > > 0x00002060 usb usb7: New USB device > > > > > > found, > > > > > > idVendor=1d6b, > > > > > > > > idProduct=0001 > > > > > > > > > > > usb usb7: New USB device strings: Mfr=3, > > > > Product=2, > > > > > > > SerialNumber=1 usb > > > > > > > > > > > usb7: Product: UHCI Host Controller usb > > > > usb7: > > > > Manufacturer: Linux > > > > > > > > > > 2.6.32.9 uhci_hcd usb usb7: > > > > > > SerialNumber: > > > > > > 0000:00:1d.1 usb > > > > > > > usb7: > > > > > > configuration #1 chosen from 1 choice > > > > > > hub > > > > 7-0:1.0: > > > USB hub > > > > > > > found > > > > > > > > > hub > > > > > > > > > > > 7-0:1.0: 2 ports detected > > > > > > xen_allocate_pirq: > > > > > > returning irq > > > > > > > 18 for > > > > > > > > > gsi 18 > > > > > > > > > > > Already setup the GSI :18 uhci_hcd > > > > 0000:00:1d.2: > > > PCI INT C > > > > > > > -> GSI > > > > > > > > > 18 > > > > > > > > > > > (level, low) -> IRQ 18 uhci_hcd > > > > 0000:00:1d.2: UHCI > > > > > Host > > > > > > > > Controller > > > > > > > > > > > uhci_hcd 0000:00:1d.2: new USB bus > > > > registered, > > > > > assigned > > > > > > > bus > > > > > > > > > number 8 > > > > > > > > > > > uhci_hcd 0000:00:1d.2: irq 18, io base > > > > 0x00002040 > > > > > usb > > > > > > > usb8: New > > > > > > > > > USB > > > > > > > > > > > device found, idVendor=1d6b, > > > > > > idProduct=0001 > > > > usb > > > > > usb8: New > > > > > > > USB > > > > > > > > > device > > > > > > > > > > > strings: Mfr=3, Product=2, > > > > > > SerialNumber=1 > > > > usb usb8: > > > > Product: UHCI > > > > > > > > > Host > > > > > > References > > > > > > Visible links > > > 1. mailto:[20]pasik@xxxxxx > > > 2. mailto:[21]pasik@xxxxxx > > > 3. mailto:[22]pasik@xxxxxx > > > 4. mailto:[23]pasik@xxxxxx > > > 5. mailto:[24]pasik@xxxxxx > > > 6. > > > > [25]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 7. > > > > > > [26]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 8. mailto:[27]pasik@xxxxxx > > > 9. > > > > [28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 10. > > > > > > [29]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 11. mailto:[30]pasik@xxxxxx > > > 12. mailto:[31]pasik@xxxxxx > > > 13. > > > > [32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 14. > > > > > > [33]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 15. mailto:[34]pasik@xxxxxx > > > 16. > > > > [35]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 17. > > > > > > [36]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops- > >dom0-xen-stable-x86_64 > > > > > 18. mailto:[37]pasik@xxxxxx > > > > References > > > > Visible links > > 1. mailto:pasik@xxxxxx > > 2. mailto:pasik@xxxxxx > > 3. mailto:pasik@xxxxxx > > 4. mailto:pasik@xxxxxx > > 5. mailto:pasik@xxxxxx > > 6. mailto:pasik@xxxxxx > > 7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 9. mailto:pasik@xxxxxx > > 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 11. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 12. mailto:pasik@xxxxxx > > 13. mailto:pasik@xxxxxx > > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 16. mailto:pasik@xxxxxx > > 17. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 18. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 19. mailto:pasik@xxxxxx > > 20. mailto:pasik@xxxxxx > > 21. mailto:pasik@xxxxxx > > 22. mailto:pasik@xxxxxx > > 23. mailto:pasik@xxxxxx > > 24. mailto:pasik@xxxxxx > > 25. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 26. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 27. mailto:pasik@xxxxxx > > 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 29. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 30. mailto:pasik@xxxxxx > > 31. mailto:pasik@xxxxxx > > 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 33. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 34. mailto:pasik@xxxxxx > > 35. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 36. > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0 > >-xen-stable-x86_64 37. mailto:pasik@xxxxxx > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-devel > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |