RE: [Xen-devel] Cannot load latest 2.6.32.10 kernel on AMD quad-core

[Mike Viau <viaum@xxxxxxxxxxxxxxx>]

> Sun, 25 Apr 2010 09:10:11 -0700 <bderzhavets@xxxxxxxxx> wrote:

>>But besides that, the output from the kernel over ttyUSB0 still doesn't look right.  You should be able to get some kernel output I would think.

>Yes, i have COM1 on both boards. No problems.

>Boris.

Just to clarify, do you really use a ttyUSB0 (via an usb to serial adapter) and it works on you kernel command line to log messages or do just use your ttyUSB serial port (in dom0 for example) to console into your Linux machine?

Thanks.

-M


--- On Sun, 4/25/10, Gerry Reno <greno@xxxxxxxxxxx> wrote:

From: Gerry Reno <greno@xxxxxxxxxxx>
Subject: Re: [Xen-devel] Cannot load latest 2.6.32.10 kernel on AMD quad-core
To: xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Sunday, April 25, 2010, 11:37 AM

Boris Derzhavets wrote:
> Per Wiki:-
>
> 2) If your computer running Xen doesn't have a real physical serial port you can add a PCI add-on serial card with a DB9 serial connector. This is a good option for many computers.
>
> seems to be the cheapest solution. No matter for AMD or Intel.
> Thanks Pasi once again.
>
> Boris.
>
>
>
> -
>
I'll check if there are any open slots and see if I can find an addon serial card.  But besides that, the output from the kernel over ttyUSB0 still doesn't look right.  You should be able to get some kernel output I would think.

-Gerry


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

---

Hotmail & Messenger. Get them on your phone now.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel