|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] CPUFreq: BUG: unable to handle kernel paging request
Hello! This is with a self-built the Debian Linux kernel package, sid r15564, which translates to b1cb4e89c3d2 of jeremy/xen.git. System is the same as in <http://lists.xensource.com/archives/html/xen-devel/2010-04/msg00303.html>, only equipped with less RAM to avoid <http://lists.xensource.com/archives/html/xen-devel/2010-04/msg01009.html>. I'm seeing a Xen dom0 crash / hang as follows: (XEN) Xen version 3.4.3-rc3 (Debian 3.4.3~rc3-2) (waldi@xxxxxxxxxx) (gcc version 4.4.3 (Debian 4.4.3-7) ) Thu Apr 8 14:16:43 UTC 2010 (XEN) Command line: com1=38400,8n1 vga=current,keep console=com1,vga loglvl=all guest_loglvl=all console_to_ring (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e000 (usable) (XEN) 000000000009e000 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000008dee0000 (usable) (XEN) 000000008dee0000 - 000000008deef000 (ACPI data) (XEN) 000000008deef000 - 000000008df00000 (ACPI NVS) (XEN) 000000008df00000 - 0000000090000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) System RAM: 2270MB (2324984kB) (XEN) ACPI: RSDP 000F7350, 0024 (r2 PTLTD ) (XEN) ACPI: XSDT 8DEEB7E4, 004C (r1 PTLTD XSDT 50000 LTP 0) (XEN) ACPI: FACP 8DEEB8A4, 00F4 (r3 FSC ïPZ- 50000 F4240) (XEN) ACPI: DSDT 8DEEB998, 34FB (r1 FSC D2030 50000 MSFT 2000002) (XEN) ACPI: FACS 8DEEFFC0, 0040 (XEN) ACPI: SSDT 8DEEEE93, 00B5 (r1 PTLTD POWERNOW 50000 LTP 1) (XEN) ACPI: APIC 8DEEEF48, 0050 (r1 PTLTD APIC 50000 LTP 0) (XEN) ACPI: MCFG 8DEEEF98, 0040 (r1 PTLTD MCFG 50000 LTP 0) (XEN) ACPI: BOOT 8DEEEFD8, 0028 (r1 PTLTD $SBFTBL$ 50000 LTP 1) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000008dee0000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f73b0 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0xf008 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f004,0], pm1x_evt[f000,0] (XEN) ACPI: wakeup_vec[8deeffcc], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:15 APIC version 16 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 1800.097 MHz processor. (XEN) CPU0: AMD Flush Filter disabled (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 128K (64 bytes/line) (XEN) CPU0: AMD K8 machine check reporting enabled. (XEN) CPU0: AMD Sempron(tm) Processor 3000+ stepping 02 (XEN) Total of 1 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0 (XEN) Platform timer is 3.579MHz ACPI PM Timer ï(XEN) Brought up 1 CPUs (XEN) I/O virtualisation disabled (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b2000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000084000000->0000000088000000 (524378 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff816b2000 (XEN) Init. ramdisk: ffffffff816b2000->ffffffff83036600 (XEN) Phys-Mach map: ffffffff83037000->ffffffff834572d0 (XEN) Start info: ffffffff83458000->ffffffff834584b4 (XEN) Page tables: ffffffff83459000->ffffffff83478000 (XEN) Boot stack: ffffffff83478000->ffffffff83479000 (XEN) TOTAL: ffffffff80000000->ffffffff83800000 (XEN) ENTRY ADDRESS: ffffffff814f5200 (XEN) Dom0 has maximum 1 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) Xen is keeping VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 136kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-12) (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Tue Apr 27 12:05:56 CEST 2010 [ 0.000000] Command line: root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 8405a-8dee0: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn 90000-fec00: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn fec10-fee00: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn fee01-fff00: 0 pages freed [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] Xen: 000000000009e000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 000000008405a000 (usable) [ 0.000000] Xen: 000000008dee0000 - 000000008deef000 (ACPI data) [ 0.000000] Xen: 000000008deef000 - 000000008df00000 (ACPI NVS) [ 0.000000] Xen: 000000008df00000 - 0000000090000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x8405a max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000008405a000 [ 0.000000] 0000000000 - 008405a000 page 4k [ 0.000000] kernel direct mapping tables up to 8405a000 @ 100000-525000 [ 0.000000] RAMDISK: 016b2000 - 03036600 [ 0.000000] ACPI: RSDP 00000000000f7350 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 000000008deeb7e4 0004C (v01 PTLTD ? XSDT 00050000 LTP 00000000) [ 0.000000] ACPI: FACP 000000008deeb8a4 000F4 (v03 FSC ïPZ-? 00050000 000F4240) [ 0.000000] ACPI: DSDT 000000008deeb998 034FB (v01 FSC D2030 00050000 MSFT 02000002) [ 0.000000] ACPI: FACS 000000008deeffc0 00040 [ 0.000000] ACPI: SSDT 000000008deeee93 000B5 (v01 PTLTD POWERNOW 00050000 LTP 00000001) [ 0.000000] ACPI: APIC 000000008deeef48 00050 (v01 PTLTD ? APIC 00050000 LTP 00000000) [ 0.000000] ACPI: MCFG 000000008deeef98 00040 (v01 PTLTD MCFG 00050000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000008deeefd8 00028 (v01 PTLTD $SBFTBL$ 00050000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000008405a000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000008405a000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000002880f] pages 11 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 008405a000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0003459000 - 0003478000] XEN PAGETABLES ==> [0003459000 - 0003478000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001691d14] TEXT DATA BSS ==> [0001000000 - 0001691d14] [ 0.000000] #4 [00016b2000 - 0003036600] RAMDISK ==> [00016b2000 - 0003036600] [ 0.000000] #5 [0003037000 - 0003459000] XEN START INFO ==> [0003037000 - 0003459000] [ 0.000000] #6 [0001692000 - 00016921c4] BRK ==> [0001692000 - 00016921c4] [ 0.000000] #7 [0000100000 - 0000503000] PGTABLE ==> [0000100000 - 0000503000] [ 0.000000] found SMP MP-table at [ffff8800000f73b0] f73b0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0008405a [ 0.000000] On node 0 totalpages: 540648 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1030 pages reserved [ 0.000000] DMA zone: 2896 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7338 pages used for memmap [ 0.000000] DMA32 zone: 529328 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 3.4.3-rc3 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800034ae000 s90008 r8192 d20584 u118784 [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] trying to map vcpu_info 0 at ffff8800034b9020, mfn 874b9, offset 32 [ 0.000000] cpu 0 using vcpu_info at ffff8800034b9020 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 532224 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff88000564a000 - ffff88000964a000 [ 0.000000] DMA: software IO TLB at phys 0x564a000 - 0x964a000 [ 0.000000] xen_swiotlb_fixup: buf=ffff88000564a000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff8800096aa000 size=32768 [ 0.000000] Memory: 2024356k/2163048k available (3102k kernel code, 456k absent, 138236k reserved, 1878k data, 588k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:512 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 511 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] Detected 1800.097 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.19 BogoMIPS (lpj=7200388) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004779] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.007352] Mount-cache hash table entries: 256 [ 0.008116] Initializing cgroup subsys ns [ 0.008599] Initializing cgroup subsys cpuacct [ 0.009080] Initializing cgroup subsys devices [ 0.009560] Initializing cgroup subsys freezer [ 0.010038] Initializing cgroup subsys net_cls [ 0.010565] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.011519] CPU: L2 Cache: 128K (64 bytes/line) [ 0.011998] CPU 0/0x0 -> Node 0 [ 0.012007] tseg: 008df00000 [ 0.012486] Performance Events: AMD PMU driver. [ 0.012967] ------------[ cut here ]------------ [ 0.013453] WARNING: at /media/data-local/thomas/tmp/linux_xen_/debian_sid/build/source_amd64_xen/arch/x86/xen/enlighten.c:721 init_hw_perf_events+0x32d/0x3cd() [ 0.014886] Hardware name: D2264-A1 [ 0.015363] Modules linked in: [ 0.015841] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1 [ 0.016000] Call Trace: [ 0.016000] [<ffffffff814fca02>] ? init_hw_perf_events+0x32d/0x3cd [ 0.016000] [<ffffffff814fca02>] ? init_hw_perf_events+0x32d/0x3cd [ 0.016000] [<ffffffff8104fc24>] ? warn_slowpath_common+0x77/0xa3 [ 0.016000] [<ffffffff814fca02>] ? init_hw_perf_events+0x32d/0x3cd [ 0.016000] [<ffffffff812fc102>] ? identify_cpu+0x2ff/0x308 [ 0.016000] [<ffffffff8100eb4f>] ? xen_restore_fl_direct_end+0x0/0x1 [ 0.016000] [<ffffffff810e7ece>] ? kmem_cache_alloc+0x8c/0xf0 [ 0.016000] [<ffffffff814fc629>] ? identify_boot_cpu+0x15/0x3e [ 0.016000] [<ffffffff814fc6b0>] ? check_bugs+0x9/0x2e [ 0.016000] [<ffffffff814f5cc2>] ? start_kernel+0x3cd/0x3e8 [ 0.016000] [<ffffffff814f7aca>] ? xen_start_kernel+0x649/0x64f [ 0.016000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.016000] ... version: 0 [ 0.016000] ... bit width: 48 [ 0.016000] ... generic registers: 4 [ 0.016000] ... value mask: 0000ffffffffffff [ 0.016000] ... max period: 00007fffffffffff [ 0.016000] ... fixed-purpose events: 0 [ 0.016000] ... event mask: 000000000000000f [ 0.016000] SMP alternatives: switching to UP code [ 0.020021] Freeing SMP alternatives: 28k freed [ 0.020542] ACPI: Core revision 20090903 [ 0.028109] alloc irq_desc for 510 on node 0 [ 0.028593] alloc kstat_irqs on node 0 [ 0.029084] alloc irq_desc for 509 on node 0 [ 0.029560] alloc kstat_irqs on node 0 [ 0.032023] alloc irq_desc for 508 on node 0 [ 0.036001] alloc kstat_irqs on node 0 [ 0.036001] alloc irq_desc for 507 on node 0 [ 0.036001] alloc kstat_irqs on node 0 [ 0.036197] Brought up 1 CPUs [ 0.040001] CPU0 attaching NULL sched-domain. [ 0.040185] devtmpfs: initialized [ 0.048189] Grant table initialized [ 0.052001] regulator: core version 0.5 [ 0.052114] NET: Registered protocol family 16 [ 0.056093] alloc irq_desc for 506 on node 0 [ 0.060001] alloc kstat_irqs on node 0 [ 0.060213] node 0 link 0: io port [0, fffff] [ 0.064014] TOM: 0000000090000000 aka 2304M [ 0.068007] node 0 link 0: mmio [e0000000, efffffff] [ 0.072011] node 0 link 0: mmio [a0000, bffff] [ 0.076006] node 0 link 0: mmio [90000000, fe0bffff] [ 0.080005] bus: [00,ff] on node 0 link 0 [ 0.084001] bus: 00 index 0 io port: [0, ffff] [ 0.084001] bus: 00 index 1 mmio: [90000000, fcffffffff] [ 0.084001] bus: 00 index 2 mmio: [a0000, bffff] [ 0.084024] ACPI: bus type pci registered [ 0.088011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 [ 0.092001] PCI: Not using MMCONFIG. [ 0.092001] PCI: Using configuration type 1 for base access [ 0.092812] bio: create slab <bio-0> at 0 [ 0.097008] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.100031] ACPI: EC: Look up EC in DSDT [ 0.109869] ACPI: Interpreter enabled [ 0.112001] ACPI: (supports S0 S1 S3 S4 S5) [ 0.112001] ACPI: Using IOAPIC for interrupt routing [ 0.112053] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 [ 0.117104] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.120478] PCI: Using MMCONFIG at e0000000 - e02fffff [ 0.131443] ACPI: No dock devices found. [ 0.132248] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.136001] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.136235] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.140001] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.140001] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.140001] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.140001] pci 0000:00:02.5: reg 20 io port: [0x1c80-0x1c8f] [ 0.140001] pci 0000:00:02.5: PME# supported from D3cold [ 0.140001] pci 0000:00:02.5: PME# disabled [ 0.140001] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff] [ 0.140001] pci 0000:00:02.7: reg 14 io port: [0x1000-0x107f] [ 0.140001] pci 0000:00:02.7: supports D1 D2 [ 0.140001] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.140001] pci 0000:00:02.7: PME# disabled [ 0.140001] pci 0000:00:03.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff] [ 0.140001] pci 0000:00:03.1: reg 10 32bit mmio: [0xfa001000-0xfa001fff] [ 0.140001] pci 0000:00:03.2: reg 10 32bit mmio: [0xfa002000-0xfa002fff] [ 0.140001] pci 0000:00:03.3: reg 10 32bit mmio: [0xfa003000-0xfa003fff] [ 0.140001] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.140001] pci 0000:00:03.3: PME# disabled [ 0.140048] pci 0000:00:05.0: reg 10 io port: [0x1cb0-0x1cb7] [ 0.144001] pci 0000:00:05.0: reg 14 io port: [0x1ca4-0x1ca7] [ 0.144001] pci 0000:00:05.0: reg 18 io port: [0x1ca8-0x1caf] [ 0.144001] pci 0000:00:05.0: reg 1c io port: [0x1ca0-0x1ca3] [ 0.144001] pci 0000:00:05.0: reg 20 io port: [0x1c90-0x1c9f] [ 0.144001] pci 0000:00:05.0: reg 24 io port: [0x1c00-0x1c7f] [ 0.144001] pci 0000:00:05.0: PME# supported from D3cold [ 0.144001] pci 0000:00:05.0: PME# disabled [ 0.144001] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.144001] pci 0000:00:06.0: PME# disabled [ 0.144001] pci 0000:00:09.0: reg 10 io port: [0x1800-0x18ff] [ 0.144001] pci 0000:00:09.0: reg 14 32bit mmio: [0xfa004000-0xfa0040ff] [ 0.144001] pci 0000:00:09.0: supports D1 D2 [ 0.144001] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold [ 0.144001] pci 0000:00:09.0: PME# disabled [ 0.144001] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold [ 0.144001] pci 0000:00:1f.0: PME# disabled [ 0.144051] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.148001] pci 0000:01:00.0: reg 14 32bit mmio: [0xfa100000-0xfa11ffff] [ 0.148001] pci 0000:01:00.0: reg 18 io port: [0x2000-0x207f] [ 0.148001] pci 0000:01:00.0: supports D1 D2 [ 0.148001] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.148001] pci 0000:00:01.0: bridge 32bit mmio: [0xfa100000-0xfa1fffff] [ 0.148001] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.148100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.152392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.156097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] [ 0.160001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:02.0 (XEN) PCI add device 00:02.5 (XEN) PCI add device 00:02.7 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:03.1 (XEN) PCI add device 00:03.2 (XEN) PCI add device 00:03.3 (XEN) PCI add device 00:05.0 (XEN) PCI add device 00:06.0 (XEN) PCI add device 00:09.0 (XEN) PCI add device 00:18.0 (XEN) PCI add device 00:18.1 (XEN) PCI add device 00:18.2 (XEN) PCI add device 00:18.3 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 01:00.0 [ 0.174484] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.176129] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.180115] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.184115] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.188115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.192115] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.196115] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.200131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.204057] sync cpu 0 get result ffffffff max_id 0 [ 0.208001] Failed to sync pcpu 0 [ 0.208001] xen_balloon: Initialising balloon driver with page order 0. [ 0.208055] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.212001] vgaarb: loaded [ 0.212113] PCI: Using ACPI for IRQ routing [ 0.216164] Switching to clocksource xen [ 0.221937] pnp: PnP ACPI init [ 0.224001] ACPI: bus type pnp registered [ 0.241767] xen: registering gsi 8 triggering 1 polarity 0 [ 0.244945] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.244945] xen: --> irq=8 [ 0.282249] Already setup the GSI :8 [ 0.294763] xen: registering gsi 13 triggering 1 polarity 0 [ 0.298707] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.298707] xen: --> irq=13 [ 0.336232] Already setup the GSI :13 [ 0.348836] xen: registering gsi 1 triggering 1 polarity 0 [ 0.352689] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.352689] xen: --> irq=1 [ 0.386085] Already setup the GSI :1 [ 0.398701] xen: registering gsi 12 triggering 1 polarity 0 [ 0.402571] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.402571] xen: --> irq=12 [ 0.440087] Already setup the GSI :12 [ 0.453351] xen: registering gsi 7 triggering 1 polarity 0 [ 0.456541] xen_allocate_pirq: returning irq 7 for gsi 7 [ 0.456541] xen: --> irq=7 [ 0.494099] Already setup the GSI :7 [ 0.506963] xen: registering gsi 4 triggering 1 polarity 0 [ 0.510619] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.510619] xen: --> irq=4 [ 0.543941] Already setup the GSI :4 [ 0.556845] xen: registering gsi 3 triggering 1 polarity 0 [ 0.560392] xen_allocate_pirq: returning irq 3 for gsi 3 [ 0.560392] xen: --> irq=3 [ 0.597951] Already setup the GSI :3 [ 0.610477] pnp: PnP ACPI: found 11 devices [ 0.614469] ACPI: ACPI bus type pnp unregistered [ 0.635341] system 00:01: ioport range 0x480-0x48f has been reserved [ 0.639326] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.639326] system 00:01: ioport range 0xf000-0xf0fe has been reserved [ 0.639326] system 00:01: ioport range 0xf200-0xf2fe has been reserved [ 0.639326] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.639326] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 0.639326] system 00:01: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.639326] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.639326] system 00:01: iomem range 0xff780000-0xffefffff has been reserved [ 0.639326] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.849272] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.852015] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.852015] pci 0000:00:01.0: MEM window: 0xfa100000-0xfa1fffff [ 0.852015] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.852015] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.852015] pci 0000:00:06.0: IO window: disabled [ 0.852015] pci 0000:00:06.0: MEM window: disabled [ 0.852015] pci 0000:00:06.0: PREFETCH window: disabled [ 0.852015] pci 0000:00:1f.0: PCI bridge, secondary bus 0000:03 [ 0.852015] pci 0000:00:1f.0: IO window: disabled [ 0.852015] pci 0000:00:1f.0: MEM window: disabled [ 0.852015] pci 0000:00:1f.0: PREFETCH window: disabled [ 0.852015] pci 0000:00:06.0: setting latency timer to 64 [ 0.852015] pci 0000:00:1f.0: setting latency timer to 64 [ 0.852015] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.852015] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.852015] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.852015] pci_bus 0000:01: resource 1 mem: [0xfa100000-0xfa1fffff] [ 0.852015] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 1.167148] NET: Registered protocol family 2 [ 1.184033] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.208867] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.234242] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.236017] TCP: Hash tables configured (established 524288 bind 65536) [ 1.236017] TCP reno registered [ 1.236017] NET: Registered protocol family 1 [ 2.888020] pci 0000:00:03.3: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.888557] pci 0000:01:00.0: Boot video device [ 2.889114] Unpacking initramfs... [ 2.950047] Freeing initrd memory: 26129k freed [ 2.978384] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.978874] DMA: Placing 64MB software IO TLB between ffff88000564a000 - ffff88000964a000 [ 2.979826] DMA: software IO TLB at phys 0x564a000 - 0x964a000 [ 2.980951] Simple Boot Flag at 0x69 set to 0x1 [ 2.981787] audit: initializing netlink socket (disabled) [ 2.982312] type=2000 audit(1272372474.062:1): initialized [ 2.983215] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.985800] VFS: Disk quotas dquot_6.5.2 [ 2.986407] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.987013] msgmni has been set to 4004 [ 2.987827] alg: No test for stdrng (krng) [ 2.988463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.989416] io scheduler noop registered [ 2.989894] io scheduler anticipatory registered [ 2.990397] io scheduler deadline registered [ 2.990920] io scheduler cfq registered (default) [ 2.991757] alloc irq_desc for 505 on node 0 [ 2.992241] alloc kstat_irqs on node 0 [ 2.992790] pcieport 0000:00:06.0: setting latency timer to 64 [ 2.993569] alloc irq_desc for 504 on node 0 [ 2.994047] alloc kstat_irqs on node 0 [ 2.994586] pcieport 0000:00:1f.0: setting latency timer to 64 [ 2.995207] aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support [ 3.002657] registering netback [ 3.005218] alloc irq_desc for 503 on node 0 [ 3.005703] alloc kstat_irqs on node 0 [ 3.006545] Linux agpgart interface v0.103 [ 3.007117] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.007806] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.008808] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.009460] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 3.010498] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.014165] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.014650] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.015357] mice: PS/2 mouse device common for all mice [ 3.015955] rtc_cmos 00:03: RTC can wake from S4 [ 3.016547] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.017078] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 3.017575] cpuidle: using governor ladder [ 3.018051] cpuidle: using governor menu [ 3.018532] No iBFT detected. [ 3.019418] TCP cubic registered [ 3.020165] NET: Registered protocol family 10 [ 3.021442] lo: Disabled Privacy Extensions [ 3.022280] Mobile IPv6 [ 3.022758] NET: Registered protocol family 17 [ 3.023443] PM: Resume from disk failed. [ 3.023956] registered taskstats version 1 [ 3.024907] rtc_cmos 00:03: setting system clock to 2010-04-27 12:47:55 UTC (1272372475) [ 3.025918] Initalizing network drop monitor service [ 3.026560] Freeing unused kernel memory: 588k freed [ 3.027589] Write protecting the kernel read-only data: 4260k Loading, please wait... [ 3.039508] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.796391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.797380] ACPI: Power Button [PWRB] [ 3.797967] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.798919] ACPI: Power Button [PWRF] [ 3.805759] SCSI subsystem initialized [ 3.863705] usbcore: registered new interface driver usbfs [ 3.864529] usbcore: registered new interface driver hub [ 3.865304] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.865828] xen: registering gsi 19 triggering 0 polarity 1 [ 3.866314] alloc irq_desc for 19 on node 0 [ 3.866791] alloc kstat_irqs on node 0 [ 3.867275] xen: --> irq=19 [ 3.867785] r8169 0000:00:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.868373] usbcore: registered new device driver usb [ 3.869173] r8169 0000:00:09.0: no PCI Express capability [ 3.870508] eth0: RTL8110s at 0xffffc9000062e000, 00:30:05:d3:3e:73, XID 04000000 IRQ 19 [ 3.886927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.895502] xen: registering gsi 23 triggering 0 polarity 1 [ 3.895995] alloc irq_desc for 23 on node 0 [ 3.896024] alloc kstat_irqs on node 0 [ 3.897057] xen: --> irq=23 [ 3.897541] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.898526] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 3.899050] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 3.900174] libata version 3.00 loaded. [ 3.903275] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported [ 3.903809] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfa003000 [ 3.912023] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 3.912558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.913038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.914010] usb usb1: Product: EHCI Host Controller [ 3.914487] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd [ 3.914965] usb usb1: SerialNumber: 0000:00:03.3 [ 3.915721] usb usb1: configuration #1 chosen from 1 choice [ 3.916392] hub 1-0:1.0: USB hub found [ 3.916914] hub 1-0:1.0: 8 ports detected [ 3.920680] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.921246] pata_sis 0000:00:02.5: version 0.5.2 [ 3.921756] xen: registering gsi 16 triggering 0 polarity 1 [ 3.922269] alloc irq_desc for 16 on node 0 [ 3.922746] alloc kstat_irqs on node 0 [ 3.923229] xen: --> irq=16 [ 3.923712] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.924962] scsi0 : pata_sis [ 3.925824] scsi1 : pata_sis [ 3.927663] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c80 irq 14 [ 3.928153] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c88 irq 15 [ 3.929663] xen: registering gsi 20 triggering 0 polarity 1 [ 3.930156] alloc irq_desc for 20 on node 0 [ 3.930661] alloc kstat_irqs on node 0 [ 3.931145] xen: --> irq=20 [ 3.931628] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.932617] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 3.932666] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 3.932666] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfa000000 [ 3.986081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.986567] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.987516] usb usb2: Product: OHCI Host Controller [ 3.987993] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 3.988021] usb usb2: SerialNumber: 0000:00:03.0 [ 3.989265] usb usb2: configuration #1 chosen from 1 choice [ 3.989867] hub 2-0:1.0: USB hub found [ 3.990391] hub 2-0:1.0: 3 ports detected [ 3.991109] xen: registering gsi 21 triggering 0 polarity 1 [ 3.991602] alloc irq_desc for 21 on node 0 [ 3.992084] alloc kstat_irqs on node 0 [ 3.992601] xen: --> irq=21 [ 3.993111] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.994099] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 3.994603] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 3.995633] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfa001000 [ 4.050052] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.050538] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.051511] usb usb3: Product: OHCI Host Controller [ 4.051987] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 4.052004] usb usb3: SerialNumber: 0000:00:03.1 [ 4.053235] usb usb3: configuration #1 chosen from 1 choice [ 4.053848] hub 3-0:1.0: USB hub found [ 4.054375] hub 3-0:1.0: 3 ports detected [ 4.055553] xen: registering gsi 22 triggering 0 polarity 1 [ 4.056050] alloc irq_desc for 22 on node 0 [ 4.056526] alloc kstat_irqs on node 0 [ 4.057040] xen: --> irq=22 [ 4.057522] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.058509] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 4.059016] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 4.060090] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfa002000 [ 4.092311] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0F08, max UDMA/33 [ 4.108316] ata1.00: configured for UDMA/33 [ 4.112958] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0F08 PQ: 0 ANSI: 5 [ 4.118158] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.118643] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.119592] usb usb4: Product: OHCI Host Controller [ 4.120021] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 4.120021] usb usb4: SerialNumber: 0000:00:03.2 [ 4.121339] usb usb4: configuration #1 chosen from 1 choice [ 4.121942] hub 4-0:1.0: USB hub found [ 4.122492] hub 4-0:1.0: 2 ports detected [ 4.273444] sata_sis 0000:00:05.0: version 1.0 [ 4.273959] xen: registering gsi 17 triggering 0 polarity 1 [ 4.274446] alloc irq_desc for 17 on node 0 [ 4.274923] alloc kstat_irqs on node 0 [ 4.275407] xen: --> irq=17 [ 4.275890] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.276025] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset [ 4.295224] scsi2 : sata_sis [ 4.296743] scsi3 : sata_sis [ 4.298082] ata3: SATA max UDMA/133 cmd 0x1cb0 ctl 0x1ca4 bmdma 0x1c90 irq 17 [ 4.299089] ata4: SATA max UDMA/133 cmd 0x1ca8 ctl 0x1ca0 bmdma 0x1c98 irq 17 [ 4.306271] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [ 4.306756] Uniform CD-ROM driver Revision: 3.20 [ 4.307756] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 4.476031] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 4.620087] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.628417] ata3.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133 [ 4.628897] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.636462] ata3.00: configured for UDMA/133 [ 4.637123] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-55MU 10.0 PQ: 0 ANSI: 5 [ 4.690997] usb 2-3: New USB device found, idVendor=046d, idProduct=c00e [ 4.691482] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.692457] usb 2-3: Product: USB-PS/2 Optical Mouse [ 4.692934] usb 2-3: Manufacturer: Logitech [ 4.694439] usb 2-3: configuration #1 chosen from 1 choice [ 4.956068] ata4: SATA link down (SStatus 0 SControl 300) [ 4.982077] usbcore: registered new interface driver hiddev [ 4.991795] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 4.992722] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.994935] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-3/2-3:1.0/input/input4 [ 4.996481] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-3/input0 [ 4.997563] usbcore: registered new interface driver usbhid [ 4.999231] usbhid: v2.6:USB HID core driver [ 5.002477] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 5.003599] sd 2:0:0:0: [sda] Write Protect is off [ 5.004105] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.004912] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.014432] sda: sda1 [ 5.031380] sd 2:0:0:0: [sda] Attached SCSI disk [ 6.900046] floppy0: no floppy controllers found [ 6.990250] device-mapper: uevent: version 1.0.3 [ 6.991795] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 7.294684] PM: Starting manual resume from disk [ 7.295202] PM: Resume from partition 254:1 [ 7.295678] PM: Checking hibernation image. [ 7.296511] PM: Error -22 checking image file [ 7.296990] PM: Resume from disk failed. [ 7.350566] kjournald starting. Commit interval 5 seconds [ 7.351068] EXT3-fs: mounted filesystem with ordered data mode. INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd[ 8.992385] udev: starting version 151 . Synthesizing the initial hotplug events...done. [ 9.477104] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Waiting for /dev to be fully populated...(XEN) Set CPU acpi_id(0) cpuid(0) Px State info: (XEN) _PPC: 0 [ 9.673567] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 (XEN) Set CPU acpi_id(0) cpuid(0) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=2 (XEN) State0: 1800MHz 59000mW 100us 7us 0xc020118a 0x18a (XEN) State1: 1000MHz 21100mW 100us 7us 0xc0201482 0x482 (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=252 num_processors=1 (XEN) _PPC: 0 [ 9.890502] processor LNXCPU:00: registered as cooling_device0 [ 10.290226] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 10.317517] EDAC MC: Ver: 2.1.0 Apr 27 2010 [ 10.383776] EDAC amd64_edac: Ver: 3.2.0 Apr 27 2010 [ 10.398560] EDAC amd64: ECC is enabled by BIOS. [ 10.399296] EDAC MC: Rev E or earlier detected [ 10.400707] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 10.404894] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 10.443663] parport_pc 00:08: reported by Plug and Play ACPI [ 10.444295] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 11.131990] xen: registering gsi 18 triggering 0 polarity 1 [ 11.132020] alloc irq_desc for 18 on node 0 [ 11.132020] alloc kstat_irqs on node 0 [ 11.133511] xen: --> irq=18 [ 11.133994] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 11.456043] intel8x0_measure_ac97_clock: measured 54477 usecs (2621 samples) [ 11.456560] intel8x0: clocking to 48000 [ 13.312051] floppy0: no floppy controllers found done. %@Setting parameters of disc: (none). Setting up LVM Volume Groups File-based locking initialisation failed. Reading all physical volumes. This may take a while... Found volume group "vg0" using metadata type lvm2 File-based locking initialisation failed. 6 logical volume(s) in volume group "vg0" now active . Checking root file system...fsck from util-linux-ng 2.16.2 /dev/mapper/vg0-boole--root: clean, 186743/350192 files, 1136657/1391616 blocks done. [ 14.714464] EXT3 FS on dm-0, internal journal Invalidating stale software suspend images... done. Cleaning up ifupdown.... Loading kernel modules...[ 14.948119] loop: module loaded done. Activating lvm and md swap...[ 15.209927] Adding 974840k swap on /dev/mapper/vg0-boole--swap. Priority:-1 extents:1 across:974840k done. Checking file systems...fsck from util-linux-ng 2.16.2 /dev/mapper/vg0-boole--data--local: clean, 307148/1617472 files, 4078583/6516736 blocks done. Setting up networking.... Mounting local filesystems...[ 15.409898] kjournald starting. Commit interval 5 seconds [ 15.411154] EXT3 FS on dm-2, internal journal [ 15.411638] EXT3-fs: mounted filesystem with ordered data mode. done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...[ 16.070685] Bridge firewalling registered [ 16.117299] device eth0 entered promiscuous mode [ 16.121749] r8169: eth0: link up [ 16.129955] br0: port 1(eth0) entering learning state Waiting for br0 to get ready (MAXWAIT is 32 seconds). [ 26.872012] eth0: no IPv6 routers present [ 26.912007] br0: no IPv6 routers present [ 31.128014] br0: port 1(eth0) entering forwarding state Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/br0/00:30:05:d3:3e:73 Sending on LPF/br0/00:30:05:d3:3e:73 Sending on Socket/fallback DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 8 DHCPOFFER from 192.168.111.2 DHCPREQUEST on br0 to 255.255.255.255 port 67 DHCPACK from 192.168.111.2 bound to 192.168.111.208 -- renewal in 19175 seconds. Starting portmap daemon.... Starting NFS common utilities: statd. [ 43.042217] RPC: Registered udp transport module. [ 43.042732] RPC: Registered tcp transport module. [ 43.043209] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 43.147802] Slow work thread pool: Starting up [ 43.148442] Slow work thread pool: Ready [ 43.149494] FS-Cache: Loaded [ 43.241008] FS-Cache: Netfs 'nfs' registered for caching [ 43.329167] svc: failed to register lockdv1 RPC service (errno 97). done. Setting kernel variables ...done. Starting portmap daemon...Already running.. Starting NFS common utilities: statd. Cleaning up temporary files.... Setting console screen modes and fonts. cannot (un)set powersave mode [9;30][14;30]Setting up ALSA...done. [ 43.912662] fuse init (API version 7.13) Setting sensors limits. INIT: Entering runlevel: 2 Starting portmap daemon...Already running.. Starting NFS common utilities: statd. Enabling additional executable binary formats: binfmt-support. Loading cpufreq kernel modules...[ 44.866578] BUG: unable to handle kernel paging request at ffff8808026d8438 [ 44.867565] IP: [<ffffffffa02c7095>] cpufreq_stat_notifier_trans+0x95/0xd7 [cpufreq_stats] [ 44.868522] PGD 1002067 PUD 0 [ 44.868999] Oops: 0002 [#1] SMP [ 44.869476] last sysfs file: /sys/module/processor/initstate [ 44.869954] CPU 0 [ 44.870428] Modules linked in: powernow_k8(+) cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative binfmt_misc fuse nfs lockd fscache nfs_acl auth_rpcgss sunrpc bridge stp loop snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq parport_pc psmouse tpm_tis amd64_edac_mod snd_timer snd_seq_device edac_core tpm parport pcspkr tpm_bios edac_mce_amd k8temp serio_raw snd soundcore evdev processor container snd_page_alloc shpchp acpi_processor pci_hotplug ext3 jbd mbcache dm_mod sd_mod crc_t10dif sg usbhid hid sr_mod cdrom sata_sis ata_generic ohci_hcd pata_sis ehci_hcd libata r8169 mii usbcore nls_base button scsi_mod thermal fan thermal_sys [last unloaded: scsi_wait_scan] [ 44.870552] Pid: 1188, comm: modprobe Tainted: G W 2.6.32-5-xen-amd64 #1 D2264-A1 [ 44.870552] RIP: e030:[<ffffffffa02c7095>] [<ffffffffa02c7095>] cpufreq_stat_notifier_trans+0x95/0xd7 [cpufreq_stats] [ 44.870552] RSP: e02b:ffff880082989ad8 EFLAGS: 00010246 [ 44.870552] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffff8800026d8440 [ 44.870552] RDX: 00000000ffffffff RSI: ffff880081ed1bc0 RDI: ffffffffa02c78b0 [ 44.870552] RBP: ffff880081ed1bc0 R08: ffff8800034ba590 R09: ffff880082989a00 [ 44.870552] R10: 000000000000000c R11: 00000000000186a0 R12: 00000000ffff06d8 [ 44.870552] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 [ 44.870552] FS: 00007fc3d68586f0(0000) GS:ffff8800034ae000(0000) knlGS:0000000000000000 [ 44.870552] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 44.870552] CR2: ffff8808026d8438 CR3: 00000000829ac000 CR4: 0000000000000660 [ 44.870552] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 44.870552] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 44.870552] Process modprobe (pid: 1188, threadinfo ffff880082988000, task ffff880002e87170) [ 44.870552] Stack: [ 44.870552] 0000000000000000 00000000fffffffe 0000000000000000 ffff880082989bf8 [ 44.870552] <0> 0000000000000001 ffffffff8106a299 ffffffff8168a6c0 ffff880082989bf8 [ 44.870552] <0> 0000000000000000 00000000ffffffff ffffffff8168a690 ffffffff8106a3d3 [ 44.870552] Call Trace: [ 44.870552] [<ffffffff8106a299>] ? notifier_call_chain+0x29/0x4c [ 44.870552] [<ffffffff8106a3d3>] ? __srcu_notifier_call_chain+0x46/0x61 [ 44.870552] [<ffffffff8123f091>] ? cpufreq_notify_transition+0x95/0xb1 [ 44.870552] [<ffffffffa02d0ae1>] ? powernowk8_target+0x5de/0x6c1 [powernow_k8] [ 44.870552] [<ffffffff81304e6a>] ? _spin_unlock_irqrestore+0xd/0xe [ 44.870552] [<ffffffff812412cf>] ? cpufreq_governor_dbs+0x2e3/0x308 [ 44.870552] [<ffffffff8123e8d9>] ? __cpufreq_governor+0x69/0xa6 [ 44.870552] [<ffffffff8123f938>] ? __cpufreq_set_policy+0x17a/0x18d [ 44.870552] [<ffffffff8123facb>] ? cpufreq_add_dev_interface+0x180/0x1e6 [ 44.870552] [<ffffffff8123fef9>] ? handle_update+0x0/0x8 [ 44.870552] [<ffffffff81240133>] ? cpufreq_add_dev_policy+0x14c/0x16b [ 44.870552] [<ffffffff812403aa>] ? cpufreq_add_dev+0x258/0x32c [ 44.870552] [<ffffffff81227c85>] ? sysdev_driver_register+0xb6/0x10d [ 44.870552] [<ffffffff8123e9c6>] ? cpufreq_register_driver+0x8f/0x13c [ 44.870552] [<ffffffffa02d16f2>] ? powernowk8_init+0xa4/0xb3 [powernow_k8] [ 44.870552] [<ffffffffa02d164e>] ? powernowk8_init+0x0/0xb3 [powernow_k8] [ 44.870552] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174 [ 44.870552] [<ffffffff8107c3d2>] ? sys_init_module+0xc5/0x21a [ 44.870552] [<ffffffff81011b42>] ? system_call_fastpath+0x16/0x1b [ 44.870552] Code: 03 e1 44 89 ea 48 c7 c0 a8 62 01 00 48 8b 14 d5 d0 74 4d 81 48 8b 34 10 48 8b 4e 20 48 85 c9 74 0e 8b 56 18 4c 89 e0 48 2b 46 08 <48> 01 04 d1 4c 89 66 08 66 ff 05 0c 08 00 00 41 39 de 74 23 41 [ 44.870552] RIP [<ffffffffa02c7095>] cpufreq_stat_notifier_trans+0x95/0xd7 [cpufreq_stats] [ 44.870552] RSP <ffff880082989ad8> [ 44.870552] CR2: ffff8808026d8438 [ 44.870552] ---[ end trace a7919e7f17c0a727 ]--- done (none). Starting enhanced syslogd: rsyslogd. Starting Xen daemons:[ 45.331750] Event-channel device installed. xenfs xenstored xenconsoled xend[ 45.582462] alloc irq_desc for 502 on node 0 [ 45.583417] alloc kstat_irqs on node 0 [ 45.584498] alloc irq_desc for 501 on node 0 [ 45.584987] alloc kstat_irqs on node 0 [ 45.586076] XENBUS: Unable to read cpu state . Starting ACPI services.... Starting deferred execution scheduler: atd. CPUFreq Utilities: Setting ondemand CPUFreq governor... Here it hangs. Magic SysRq works. I'll rebuild that kernel with debugging info. Regards, Thomas Attachment:
signature.asc _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |