|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] AMD Phenom II 940: mm/vmalloc.c:110 vmap_page_range_noflush
> Finally, my serial port header cables showed up so I installed them and > now have some console output. > > Case 1: Xen 4.0.0-rc8 / pv_ops dom0 kernel 2.6.32.10 > > After playing around with the order of the consoles on the xen and > kernel lines I am able to get a login prompt but only after quite a long > time (4-5 mins). It seems like something is stealing processor cycles. > And the behavior is not consistent, on different boots I get different > errors at times. > > > Case 1: pv_ops domU kernel 2.6.32.10 (no xen dom0) > > The kernel shows a lot of errors and just hangs. > > > > Attached: console output for both cases plus menu.lst > > -Gerry > > > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.32.10 (root@grp-01-23-02) (gcc version 4.4.3 > (Ubuntu 4.4.3-4ubuntu5) ) #12 SMP Sat Apr0 > [ 0.000000] Command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 > vga=ext ro console=tty0,115200n8 consolet > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afde0000 (usable) > [ 0.000000] BIOS-e820: 00000000afde0000 - 00000000afde3000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000afde3000 - 00000000afdf0000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000afdf0000 - 00000000afe00000 (reserved) > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) > [ 0.000000] DMI 2.4 present. > [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] last_pfn = 0xafde0 max_arch_pfn = 0x400000000 > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) > [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) > [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) > [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 00000000afde0000 (usable) > [ 0.000000] modified: 00000000afde0000 - 00000000afde3000 (ACPI NVS) > [ 0.000000] modified: 00000000afde3000 - 00000000afdf0000 (ACPI data) > [ 0.000000] modified: 00000000afdf0000 - 00000000afe00000 (reserved) > [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) > [ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable) > [ 0.000000] Using GB pages for direct mapping > [ 0.000000] init_memory_mapping: 0000000000000000-00000000afde0000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 > [ 0.000000] RAMDISK: 33d29000 - 37fef12a > [ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT ) > [ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI > 42302E31 GBTU 01010101) > [ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI > 42302E31 GBTU 01010101) > [ 0.000000] ACPI: DSDT 00000000afde30c0 06E65 (v01 GBT GBTUACPI > 00001000 MSFT 03000000) > [ 0.000000] ACPI: FACS 00000000afde0000 00040 > [ 0.000000] ACPI: HPET 00000000afdea000 00038 (v01 GBT GBTUACPI > 42302E31 GBTU 00000098) > [ 0.000000] ACPI: MCFG 00000000afdea040 0003C (v01 GBT GBTUACPI > 42302E31 GBTU 01010101) > [ 0.000000] ACPI: TAMG 00000000afdea080 0030A (v01 GBT GBT B0 > 5455312E BG?? 53450101) > [ 0.000000] ACPI: APIC 00000000afde9f40 00084 (v01 GBT GBTUACPI > 42302E31 GBTU 01010101) > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000230000000 > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 > [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] > [ 0.000000] bootmap [0000000000010000 - 0000000000055fff] pages 46 > [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> > [0000006000 - 0000008000] > [ 0.000000] #2 [0001000000 - 0001a51864] TEXT DATA BSS ==> > [0001000000 - 0001a51864] > [ 0.000000] #3 [0033d29000 - 0037fef12a] RAMDISK ==> > [0033d29000 - 0037fef12a] > [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> > [000009f800 - 0000100000] > [ 0.000000] #5 [0001a52000 - 0001a520fe] BRK ==> > [0001a52000 - 0001a520fe] > [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> > [0000008000 - 000000a000] > [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> > [000000a000 - 000000b000] > [ 0.000000] found SMP MP-table at [ffff8800000f5c30] f5c30 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00230000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[4] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x00000001 > [ 0.000000] 0: 0x00000006 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x000afde0 > [ 0.000000] 0: 0x00100000 -> 0x00230000 > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: 0000000000001000 - > 0000000000006000 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000f0000 > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - > 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000afde0000 - > 00000000afde3000 > [ 0.000000] PM: Registered nosave memory: 00000000afde3000 - > 00000000afdf0000 > [ 0.000000] PM: Registered nosave memory: 00000000afdf0000 - > 00000000afe00000 > [ 0.000000] PM: Registered nosave memory: 00000000afe00000 - > 00000000e0000000 > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - > 00000000f0000000 > [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - > 00000000fec00000 > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - > 0000000100000000 > [ 0.000000] Allocating PCI resources starting at afe00000 (gap: > afe00000:30200000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s91416 r8192 > d23272 u524288 > [ 0.000000] pcpu-alloc: s91416 r8192 d23272 u524288 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 1933972 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: > root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 vga=ext ro > console=tty0,115200n8 t > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Initializing CPU#0 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Node 0: aperture @ 20000000 size 32 MB > [ 0.000000] Aperture pointing to e820 RAM. Ignoring. > [ 0.000000] Memory: 7605344k/9175040k available (5523k kernel code, > 1313304k absent, 256392k reserved, 3053k data, 8) > [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, > CPUs=4, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:4352 nr_irqs:440 > [ 0.000000] Console: colour VGA+ 80x50 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [ttyS0] enabled > [ 0.000000] allocated 78643200 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want > memory cgroups > [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu > timer > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 3013.747 MHz processor. > [ 0.030006] Calibrating delay loop (skipped), value calculated using timer > frequency.. 6027.48 BogoMIPS (lpj=3013743) > [ 0.050017] Security Framework initialized > [ 0.054134] SELinux: Disabled at boot. > [ 0.058452] Dentry cache hash table entries: 1048576 (order: 11, 8388608 > bytes) > [ 0.063393] Inode-cache hash table entries: 524288 (order: 10, 4194304 > bytes) > [ 0.071575] Mount-cache hash table entries: 256 > [ 0.080121] Initializing cgroup subsys ns > [ 0.084147] Initializing cgroup subsys cpuacct > [ 0.090004] Initializing cgroup subsys memory > [ 0.094384] Initializing cgroup subsys devices > [ 0.100002] Initializing cgroup subsys freezer > [ 0.104466] Initializing cgroup subsys net_cls > [ 0.108943] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.110002] CPU: L2 Cache: 512K (64 bytes/line) > [ 0.120003] CPU 0/0x0 -> Node 0 > [ 0.123163] CPU: Physical Processor ID: 0 > [ 0.127190] CPU: Processor Core ID: 0 > [ 0.130002] mce: CPU supports 6 MCE banks > [ 0.134042] using C1E aware idle routine > [ 0.137986] Performance Events: AMD PMU driver. > [ 0.141521] ... version: 0 > [ 0.145549] ... bit width: 48 > [ 0.150001] ... generic registers: 4 > [ 0.154024] ... value mask: 0000ffffffffffff > [ 0.160001] ... max period: 00007fffffffffff > [ 0.165330] ... fixed-purpose events: 0 > [ 0.170001] ... event mask: 000000000000000f > [ 0.176667] ACPI: Core revision 20090903 > [ 0.200029] ftrace: converting mcount calls to 0f 1f 44 00 00 > [ 0.210008] ftrace: allocating 21751 entries in 86 pages > [ 0.225172] Setting APIC routing to flat > [ 0.230490] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.336570] CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02 > [ 0.350000] Booting processor 1 APIC 0x1 ip 0x6000 > [ 0.040000] Initializing CPU#1 > [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) > [ 0.040000] CPU 1/0x1 -> Node 0 > [ 0.040000] CPU: Physical Processor ID: 0 > [ 0.040000] CPU: Processor Core ID: 1 > [ 0.500087] CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02 > [ 0.521266] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.530052] Booting processor 2 APIC 0x2 ip 0x6000 > [ 0.040000] Initializing CPU#2 > [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) > [ 0.040000] CPU 2/0x2 -> Node 0 > [ 0.040000] CPU: Physical Processor ID: 0 > [ 0.040000] CPU: Processor Core ID: 3 > [ 0.700082] CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02 > [ 0.721263] checking TSC synchronization [CPU#0 -> CPU#2]: passed. > [ 0.730058] Booting processor 3 APIC 0x3 ip 0x6000 > [ 0.040000] Initializing CPU#3 > [ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.040000] CPU: L2 Cache: 512K (64 bytes/line) > [ 0.040000] CPU 3/0x3 -> Node 0 > [ 0.040000] CPU: Physical Processor ID: 0 > [ 0.040000] CPU: Processor Core ID: 2 > [ 0.900091] CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02 > [ 0.921264] checking TSC synchronization [CPU#0 -> CPU#3]: passed. > [ 0.930009] Brought up 4 CPUs > [ 0.940001] Total of 4 processors activated (24110.25 BogoMIPS). > [ 0.950170] devtmpfs: initialized > [ 0.954622] regulator: core version 0.5 > [ 0.958500] Time: 0:10:44 Date: 05/05/10 > [ 0.960041] NET: Registered protocol family 16 > [ 0.964594] TOM: 00000000d0000000 aka 3328M > [ 0.970012] TOM2: 0000000230000000 aka 8960M > [ 0.974339] ACPI: bus type pci registered > [ 0.978424] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - > 255 > [ 0.980002] PCI: MCFG area at e0000000 reserved in E820 > [ 0.995600] PCI: Using MMCONFIG at e0000000 - efffffff > [ 1.000001] PCI: Using configuration type 1 for base access > [ 1.006220] bio: create slab <bio-0> at 0 > [ 1.020358] ACPI: Interpreter enabled > [ 1.024052] ACPI: (supports S0 S1 S4 S5) > [ 1.028207] ACPI: Using IOAPIC for interrupt routing > [ 1.033096] ACPI Warning: Incorrect checksum in table [??????"???] - 00, > should be A6 (20090903/tbutils-314) > [ 1.042365] ACPI: No dock devices found. > [ 1.046409] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 1.050128] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold > [ 1.060002] pci 0000:00:0a.0: PME# disabled > [ 1.064490] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot > [ 1.070003] pci 0000:00:12.2: PME# disabled > [ 1.074404] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot > [ 1.080004] pci 0000:00:13.2: PME# disabled > [ 1.084437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold > [ 1.090003] pci 0000:00:14.2: PME# disabled > [ 1.094608] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 1.100003] pci 0000:02:00.0: PME# disabled > [ 1.104387] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot > [ 1.110004] pci 0000:03:0e.0: PME# disabled > [ 1.114240] pci 0000:00:14.4: transparent bridge > [ 1.132377] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.140299] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.148292] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.153425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.163451] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.172355] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.180286] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.188293] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, > disabled. > [ 1.193491] vgaarb: device added: > PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none > [ 1.200002] vgaarb: loaded > [ 1.202810] SCSI subsystem initialized > [ 1.210142] usbcore: registered new interface driver usbfs > [ 1.215652] usbcore: registered new interface driver hub > [ 1.220016] usbcore: registered new device driver usb > [ 1.225157] ACPI: WMI: Mapper loaded > [ 1.230001] PCI: Using ACPI for IRQ routing > [ 1.234206] pci 0000:00:00.0: BAR 3: address space collision on of device > [0xe0000000-0xffffffff] > [ 1.240001] pci 0000:00:00.0: BAR 3: can't allocate resource > [ 1.250004] NetLabel: Initializing > [ 1.253432] NetLabel: domain hash size = 128 > [ 1.257807] NetLabel: protocols = UNLABELED CIPSOv4 > [ 1.260009] NetLabel: unlabeled traffic allowed by default > [ 1.265630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 > [ 1.271470] hpet0: 4 comparators, 32-bit 14.318180 MHz counter > [ 1.281005] Switching to clocksource tsc > [ 1.285069] pnp: PnP ACPI init > [ 1.285069] ACPI: bus type pnp registered > [ 1.289814] pnp 00:0c: mem resource (0xd1c00-0xd3fff) overlaps > 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling > [ 1.299767] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps > 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling > [ 1.309708] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps > 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling > [ 1.319646] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps > 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling > [ 1.329587] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 > BAR 3 (0x0-0x1fffffff), disabling > [ 1.339181] pnp 00:0c: mem resource (0x100000-0xafddffff) overlaps > 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling > [ 1.349524] pnp: PnP ACPI: found 13 devices > [ 1.353738] ACPI: ACPI bus type pnp unregistered > [ 1.358377] system 00:01: ioport range 0x4d0-0x4d1 has been reserved > [ 1.364773] system 00:01: ioport range 0x220-0x225 has been reserved > [ 1.371159] system 00:01: ioport range 0x290-0x294 has been reserved > [ 1.377523] system 00:02: ioport range 0x4100-0x411f has been reserved > [ 1.384089] system 00:02: ioport range 0x228-0x22f has been reserved > [ 1.390470] system 00:02: ioport range 0x40b-0x40b has been reserved > [ 1.396832] system 00:02: ioport range 0x4d6-0x4d6 has been reserved > [ 1.403229] system 00:02: ioport range 0xc00-0xc01 has been reserved > [ 1.409597] system 00:02: ioport range 0xc14-0xc14 has been reserved > [ 1.415992] system 00:02: ioport range 0xc50-0xc52 has been reserved > [ 1.422370] system 00:02: ioport range 0xc6c-0xc6d has been reserved > [ 1.428735] system 00:02: ioport range 0xc6f-0xc6f has been reserved > [ 1.435128] system 00:02: ioport range 0xcd0-0xcd1 has been reserved > [ 1.441509] system 00:02: ioport range 0xcd2-0xcd3 has been reserved > [ 1.447871] system 00:02: ioport range 0xcd4-0xcdf has been reserved > [ 1.454266] system 00:02: ioport range 0x4000-0x40fe has been reserved > [ 1.460818] system 00:02: ioport range 0x4210-0x4217 has been reserved > [ 1.467355] system 00:02: ioport range 0xb00-0xb0f has been reserved > [ 1.473748] system 00:02: ioport range 0xb10-0xb1f has been reserved > [ 1.480128] system 00:02: ioport range 0xb20-0xb3f has been reserved > [ 1.486493] system 00:0b: iomem range 0xe0000000-0xefffffff has been > reserved > [ 1.493667] system 00:0c: iomem range 0xafde0000-0xafdfffff could not be > reserved > [ 1.501182] system 00:0c: iomem range 0xffff0000-0xffffffff has been > reserved > [ 1.508330] system 00:0c: iomem range 0xafef0000-0xcfeeffff could not be > reserved > [ 1.515856] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be > reserved > [ 1.523369] system 00:0c: iomem range 0xfee00000-0xfee00fff has been > reserved > [ 1.530534] system 00:0c: iomem range 0xfff80000-0xfffeffff has been > reserved > [ 1.542754] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 1.548689] pci 0000:00:01.0: IO window: 0xe000-0xefff > [ 1.554050] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdffffff > [ 1.560175] pci 0000:00:01.0: PREFETCH window: > 0x000000d0000000-0x000000dfffffff > [ 1.567754] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 > [ 1.573722] pci 0000:00:0a.0: IO window: 0xd000-0xdfff > [ 1.579047] pci 0000:00:0a.0: MEM window: 0xfdd00000-0xfddfffff > [ 1.585181] pci 0000:00:0a.0: PREFETCH window: > 0x000000fda00000-0x000000fdafffff > [ 1.592775] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 > [ 1.598711] pci 0000:00:14.4: IO window: 0xc000-0xcfff > [ 1.604067] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff > [ 1.610193] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff > [ 1.616751] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ 1.623549] NET: Registered protocol family 2 > [ 1.628090] IP route cache hash table entries: 262144 (order: 9, 2097152 > bytes) > [ 1.636549] ------------[ cut here ]------------ > [ 1.641209] WARNING: at mm/vmalloc.c:110 > vmap_page_range_noflush+0x301/0x380() > [ 1.648440] Hardware name: GA-MA790GP-UD4H > [ 1.652582] Modules linked in: > [ 1.655710] Pid: 1, comm: swapper Not tainted 2.6.32.10 #12 > [ 1.661321] Call Trace: > [ 1.663801] [<ffffffff8106602b>] warn_slowpath_common+0x7b/0xc0 > [ 1.669819] [<ffffffff81066084>] warn_slowpath_null+0x14/0x20 > [ 1.675698] [<ffffffff8111bb31>] vmap_page_range_noflush+0x301/0x380 > [ 1.682164] [<ffffffff8111bbe2>] map_vm_area+0x32/0x50 > [ 1.687402] [<ffffffff8111d010>] __vmalloc_area_node+0x100/0x190 > [ 1.693535] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222 > [ 1.700172] [<ffffffff8111cf02>] __vmalloc_node+0xa2/0xb0 > [ 1.705671] [<ffffffff81898700>] ? alloc_large_system_hash+0x15e/0x222 > [ 1.712324] [<ffffffff818b4a72>] ? inet_init+0x0/0x209 > [ 1.717562] [<ffffffff8111d282>] __vmalloc+0x22/0x30 > [ 1.722653] [<ffffffff81898700>] alloc_large_system_hash+0x15e/0x222 > [ 1.729916] [<ffffffff818b4a72>] ? inet_init+0x0/0x209 > [ 1.735186] [<ffffffff818b4a72>] ? inet_init+0x0/0x209 > [ 1.740438] [<ffffffff818b44b6>] tcp_init+0xa3/0x383 > [ 1.745505] [<ffffffff818b4bbd>] inet_init+0x14b/0x209 > [ 1.750772] [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1a0 > [ 1.756451] [<ffffffff8187972c>] kernel_init+0x15a/0x1b0 > [ 1.761890] [<ffffffff810150ea>] child_rip+0xa/0x20 > [ 1.766870] [<ffffffff818795d2>] ? kernel_init+0x0/0x1b0 > [ 1.772307] [<ffffffff810150e0>] ? child_rip+0x0/0x20 > [ 1.777461] ---[ end trace e93713a9d40cd06c ]--- > [ 1.782160] general protection fault: 0000 [#1] SMP This is the same error I've gotten. Now thought I can't reproduce it (after I slimmed down the .config to build less modules). Try 'nopat' as a command line parameter. Also, you might want to update your kernel. The 2.6.32.12 is out _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |