|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] iommuu/vt-d issues with LSI MegaSAS (PERC5i) [Full log Xen + dom0 kernel]
On Sun, May 30, 2010 at 11:33:05AM -0700, M. Nunberg wrote: > Here is the full log, kernel + xen > Thanks! This should be detailed enough to figure out what happens.. -- Pasi > \ \/ /___ _ __ | || | / _ \ / | _ __ ___/ | > \ // _ \ '_ \ | || |_| | | || |__| '__/ __| | > / \ __/ | | | |__ _| |_| || |__| | | (__| | > /_/\_\___|_| |_| |_|(_)___(_)_| |_| \___|_| > > (XEN) Xen version 4.0.1-rc1 (mordy@) (gcc version 4.3.2 (Debian > 4.3.2-1.1) ) Fri May 28 16:46:04 PDT 2010 > (XEN) Latest ChangeSet: Sat May 22 07:18:16 2010 +0100 > 21162:370fd9f97c70 > (XEN) Console output is synchronous. > (XEN) Command line: iommu=verbose loglvl=all guest_loglvl=all > sync_console console_to_rint com1=115200,8n1 console=com1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009a000 (usable) > (XEN) 000000000009a000 - 00000000000a0000 (reserved) > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000bf760000 (usable) > (XEN) 00000000bf76e000 - 00000000bf770000 type 9 > (XEN) 00000000bf770000 - 00000000bf77e000 (ACPI data) > (XEN) 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS) > (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) > (XEN) 00000000bf7ec000 - 00000000c0000000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000340000000 (usable) > (XEN) ACPI: RSDP 000F9E10, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT BF770100, 0094 (r1 NEC 20090424 MSFT > 97) > (XEN) ACPI: FACP BF770290, 00F4 (r4 042409 FACP1917 20090424 MSFT > 97) > (XEN) ACPI: DSDT BF770670, 5BFB (r2 10601 10601000 0 INTL > 20051117) > (XEN) ACPI: FACS BF77E000, 0040 > (XEN) ACPI: APIC BF770390, 00D2 (r2 042409 APIC1917 20090424 MSFT > 97) > (XEN) ACPI: MCFG BF770470, 003C (r1 042409 OEMMCFG 20090424 MSFT > 97) > (XEN) ACPI: SLIC BF7704B0, 0176 (r1 NEC 20090424 MSFT > 97) > (XEN) ACPI: ERST BF770630, 0040 (r1 042409 WHEA1917 20090424 MSFT > 97) > (XEN) ACPI: OEMB BF77E040, 007B (r1 042409 OEMB1917 20090424 MSFT > 97) > (XEN) ACPI: SRAT BF77A670, 01D0 (r1 042409 OEMSRAT 1 INTL > 1) > (XEN) ACPI: HPET BF77A840, 0038 (r1 042409 OEMHPET 20090424 MSFT > 97) > (XEN) ACPI: DMAR BF77E0C0, 0118 (r1 AMI OEMDMAR 1 MSFT > 97) > (XEN) ACPI: SSDT BF781DF0, 0363 (r1 DpgPmm CpuPm 12 INTL > 20051117) > (XEN) ACPI: EINJ BF77A880, 0130 (r1 AMIER AMI_EINJ 20090424 MSFT > 97) > (XEN) ACPI: BERT BF77AA10, 0030 (r1 AMIER AMI_BERT 20090424 MSFT > 97) > (XEN) ACPI: ERST BF77AA40, 01B0 (r1 AMIER AMI_ERST 20090424 MSFT > 97) > (XEN) ACPI: HEST BF77ABF0, 00A8 (r1 AMIER AMI_HEST 20090424 MSFT > 97) > (XEN) System RAM: 12278MB (12573672kB) > (XEN) SRAT: PXM 0 -> APIC 0 -> Node 0 > (XEN) SRAT: PXM 0 -> APIC 2 -> Node 0 > (XEN) SRAT: PXM 0 -> APIC 4 -> Node 0 > (XEN) SRAT: PXM 0 -> APIC 6 -> Node 0 > (XEN) SRAT: PXM 0 -> APIC 1 -> Node 0 > (XEN) SRAT: PXM 0 -> APIC 3 -> Node 0 > (XEN) SRAT: PXM 0 -> APIC 5 -> Node 0 > (XEN) SRAT: PXM 0 -> APIC 7 -> Node 0 > (XEN) SRAT: PXM 1 -> APIC 16 -> Node 1 > (XEN) SRAT: PXM 1 -> APIC 18 -> Node 1 > (XEN) SRAT: PXM 1 -> APIC 20 -> Node 1 > (XEN) SRAT: PXM 1 -> APIC 22 -> Node 1 > (XEN) SRAT: PXM 1 -> APIC 17 -> Node 1 > (XEN) SRAT: PXM 1 -> APIC 19 -> Node 1 > (XEN) SRAT: PXM 1 -> APIC 21 -> Node 1 > (XEN) SRAT: PXM 1 -> APIC 23 -> Node 1 > (XEN) SRAT: Node 0 PXM 0 0-a0000 > (XEN) SRAT: Node 0 PXM 0 100000-c0000000 > (XEN) SRAT: Node 0 PXM 0 100000000-1c0000000 > (XEN) SRAT: Node 1 PXM 1 1c0000000-340000000 > (XEN) NUMA: Allocated memnodemap from 33fdfb000 - 33fdff000 > (XEN) NUMA: Using 8 for the hash shift. > (XEN) Domain heap initialised DMA width 30 bits > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[bf77e00c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled) > (XEN) Processor #16 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > (XEN) Processor #18 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) > (XEN) Processor #20 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) > (XEN) Processor #6 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) > (XEN) Processor #22 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) > (XEN) Processor #1 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled) > (XEN) Processor #17 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled) > (XEN) Processor #3 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled) > (XEN) Processor #19 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled) > (XEN) Processor #5 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled) > (XEN) Processor #21 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled) > (XEN) Processor #7 7:10 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled) > (XEN) Processor #23 7:10 APIC version 21 > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > (XEN) Overriding APIC driver with bigsmp > (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Phys. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000 > (XEN) [VT-D]dmar.c:679: Host address width 40 > (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD: > (XEN) [VT-D]dmar.c:398: dmaru->address = fbffe000 > (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7 > (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7 > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000 end_address effff > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2 > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7 > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr bf7ec000 end_address > bf7fffff > (XEN) [VT-D]dmar.c:704: found ACPI_DMAR_ATSR: > (XEN) [VT-D]dmar.c:599: atsru->all_ports: 0 > (XEN) [VT-D]dmar.c:320: bridge: 0:1.0 start = 0 sec = 1 sub = 1 > (XEN) [VT-D]dmar.c:320: bridge: 0:3.0 start = 0 sec = 2 sub = 2 > (XEN) [VT-D]dmar.c:320: bridge: 0:7.0 start = 0 sec = 3 sub = 3 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: Not using MMCONFIG. > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2266.784 MHz processor. > (XEN) Initing memory sharing. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) HVM: ASIDs enabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Intel machine check reporting enabled > (XEN) [VT-D]iommu.c:1078: drhd->address = fbffe000 iommu->reg = > ffff82c3fff57000 > (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f0207e > (XEN) Intel VT-d Snoop Control not supported. > (XEN) Intel VT-d DMA Passthrough not supported. > (XEN) Intel VT-d Queued Invalidation supported. > (XEN) Intel VT-d Interrupt Remapping supported. > (XEN) I/O virtualisation enabled > (XEN) I/O virtualisation for PV guests disabled > (XEN) Total of 16 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) TSC is reliable, synchronization unnecessary > (XEN) Platform timer is 14.318MHz HPET > ÿ(XEN) Allocated console ring of 128 KiB. > (XEN) microcode.c:73:d32767 microcode: CPU1 resumed > (XEN) microcode.c:73:d32767 microcode: CPU9 resumed > (XEN) microcode.c:73:d32767 microcode: CPU6 resumed > (XEN) microcode.c:73:d32767 microcode: CPU14 resumed > (XEN) microcode.c:73:d32767 microcode: CPU7 resumed > (XEN) microcode.c:73:d32767 microcode: CPU15 resumed > (XEN) microcode.c:73:d32767 microcode: CPU10 resumed > (XEN) microcode.c:73:d32767 microcode: CPU13 resumed > (XEN) microcode.c:73:d32767 microcode: CPU5 resumed > (XEN) microcode.c:73:d32767 microcode: CPU2 resumed > (XEN) microcode.c:73:d32767 microcode: CPU3 resumed > (XEN) microcode.c:73:d32767 microcode: CPU11 resumed > (XEN) microcode.c:73:d32767 microcode: CPU12 resumed > (XEN) microcode.c:73:d32767 microcode: CPU8 resumed > (XEN) microcode.c:73:d32767 microcode: CPU4 resumed > (XEN) Brought up 16 CPUs > (XEN) Turbo Mode detected! > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is > enabled. > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:0.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.1 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.2 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.3 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.4 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.5 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.6 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.7 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 1:0.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 5:e.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 7:0.0 > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 8:0.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.4 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.5 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.4 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.4 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.5 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.0 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.1 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.2 > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.3 > (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg = > ffff82c3fff57000 > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26b6000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000100000000->0000000120000000 (2937039 pages > to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff826b6000 > (XEN) Init. ramdisk: ffffffff826b6000->ffffffff8f7d7600 > (XEN) Phys-Mach map: ffffffff8f7d8000->ffffffff90f40678 > (XEN) Start info: ffffffff90f41000->ffffffff90f414b4 > (XEN) Page tables: ffffffff90f42000->ffffffff90fcf000 > (XEN) Boot stack: ffffffff90fcf000->ffffffff90fd0000 > (XEN) TOTAL: ffffffff80000000->ffffffff91400000 > (XEN) ENTRY ADDRESS: ffffffff819be200 > (XEN) Dom0 has maximum 16 VCPUs > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) ********************************************** > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > (XEN) ******* This option is intended to aid debugging of Xen by > ensuring > (XEN) ******* that all output is synchronously delivered on the serial > line. > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > (XEN) ******* timekeeping. It is NOT recommended for production use! > (XEN) ********************************************** > (XEN) 3... 2... 1... > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > input to Xen) > (XEN) Freed 180kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.32.13 (mordy@debmed) (gcc version 4.3.2 (Debian > 4.3.2-1.1) ) #3 SMP Fri May 28 13:20:24 PDT 2010 > Command line: root=/dev/mapper/MISC-fedora ro nomodeset console=hvc0 > earlyprintk=xen debug initcall_debug loglvel=10 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > xen_release_chunk: looking at area pfn bf760-bf76e: 14 pages freed > xen_release_chunk: looking at area pfn bf7e0-bf7ec: 12 pages freed > xen_release_chunk: looking at area pfn c0000-fec00: 257024 pages freed > xen_release_chunk: looking at area pfn fec01-fee00: 511 pages freed > xen_release_chunk: looking at area pfn fee01-ffc00: 3583 pages freed > released 261144 pages of unused memory > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000000009a000 (usable) > Xen: 000000000009a000 - 0000000000100000 (reserved) > Xen: 0000000000100000 - 00000000bf760000 (usable) > Xen: 00000000bf76e000 - 00000000bf770000 type 9 > Xen: 00000000bf770000 - 00000000bf77e000 (ACPI data) > Xen: 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS) > Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) > Xen: 00000000bf7ec000 - 00000000c0000000 (reserved) > Xen: 00000000fec00000 - 00000000fec01000 (reserved) > Xen: 00000000fee00000 - 00000000fee01000 (reserved) > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > Xen: 0000000100000000 - 00000002ed0cf000 (usable) > bootconsole [xenboot0] enabled > DMI present. > AMI BIOS detected: BIOS may corrupt low RAM, working around it. > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> > (reserved) > last_pfn = 0x2ed0cf max_arch_pfn = 0x400000000 > x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 > last_pfn = 0xbf760 max_arch_pfn = 0x400000000 > initial memory mapped : 0 - 20000000 > init_memory_mapping: 0000000000000000-00000000bf760000 > 0000000000 - 00bf760000 page 4k > kernel direct mapping tables up to bf760000 @ 100000-700000 > init_memory_mapping: 0000000100000000-00000002ed0cf000 > 0100000000 - 02ed0cf000 page 4k > kernel direct mapping tables up to 2ed0cf000 @ 10fcf000-12745000 > RAMDISK: 026b6000 - 0f7d7600 > ACPI: RSDP 00000000000f9e10 00024 (v02 ACPIAM) > ACPI: XSDT 00000000bf770100 00094 (v01 NEC 20090424 MSFT > 00000097) > ACPI: FACP 00000000bf770290 000F4 (v04 042409 FACP1917 20090424 MSFT > 00000097) > ACPI: DSDT 00000000bf770670 05BFB (v02 10601 10601000 00000000 INTL > 20051117) > ACPI: FACS 00000000bf77e000 00040 > ACPI: APIC 00000000bf770390 000D2 (v02 042409 APIC1917 20090424 MSFT > 00000097) > ACPI: MCFG 00000000bf770470 0003C (v01 042409 OEMMCFG 20090424 MSFT > 00000097) > ACPI: SLIC 00000000bf7704b0 00176 (v01 NEC 20090424 MSFT > 00000097) > ACPI: ERST 00000000bf770630 00040 (v01 042409 WHEA1917 20090424 MSFT > 00000097) > ACPI: OEMB 00000000bf77e040 0007B (v01 042409 OEMB1917 20090424 MSFT > 00000097) > ACPI: SRAT 00000000bf77a670 001D0 (v01 042409 OEMSRAT 00000001 INTL > 00000001) > ACPI: HPET 00000000bf77a840 00038 (v01 042409 OEMHPET 20090424 MSFT > 00000097) > ACPI: 00000000bf77e0c0 00118 (v01 AMI OEMDMAR 00000001 MSFT > 00000097) > ACPI: SSDT 00000000bf781df0 00363 (v01 DpgPmm CpuPm 00000012 INTL > 20051117) > ACPI: EINJ 00000000bf77a880 00130 (v01 AMIER AMI_EINJ 20090424 MSFT > 00000097) > ACPI: BERT 00000000bf77aa10 00030 (v01 AMIER AMI_BERT 20090424 MSFT > 00000097) > ACPI: ERST 00000000bf77aa40 001B0 (v01 AMIER AMI_ERST 20090424 MSFT > 00000097) > ACPI: HEST 00000000bf77abf0 000A8 (v01 AMIER AMI_HEST 20090424 MSFT > 00000097) > ACPI: Local APIC address 0xfee00000 > SRAT: PXM 0 -> APIC 0 -> Node 0 > SRAT: PXM 0 -> APIC 2 -> Node 0 > SRAT: PXM 0 -> APIC 4 -> Node 0 > SRAT: PXM 0 -> APIC 6 -> Node 0 > SRAT: PXM 0 -> APIC 1 -> Node 0 > SRAT: PXM 0 -> APIC 3 -> Node 0 > SRAT: PXM 0 -> APIC 5 -> Node 0 > SRAT: PXM 0 -> APIC 7 -> Node 0 > SRAT: PXM 1 -> APIC 16 -> Node 1 > SRAT: PXM 1 -> APIC 18 -> Node 1 > SRAT: PXM 1 -> APIC 20 -> Node 1 > SRAT: PXM 1 -> APIC 22 -> Node 1 > SRAT: PXM 1 -> APIC 17 -> Node 1 > SRAT: PXM 1 -> APIC 19 -> Node 1 > SRAT: PXM 1 -> APIC 21 -> Node 1 > SRAT: PXM 1 -> APIC 23 -> Node 1 > SRAT: Node 0 PXM 0 0-a0000 > SRAT: Node 0 PXM 0 100000-c0000000 > SRAT: Node 0 PXM 0 100000000-1c0000000 > SRAT: Node 2 PXM 257 1c0000000-340000000 > NUMA: Allocated memnodemap from 10000 - 16840 > NUMA: Using 20 for the hash shift. > Bootmem setup node 0 0000000000000000-00000001c0000000 > NODE_DATA [0000000000016840 - 000000000002e83f] > bootmap [000000000002f000 - 0000000000066fff] pages 38 > (10 early reservations) ==> bootmem [0000000000 - 01c0000000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > #1 [0010f42000 - 0010fcf000] XEN PAGETABLES ==> [0010f42000 - > 0010fcf000] > #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - > 0000008000] > #3 [0001000000 - 0002695878] TEXT DATA BSS ==> [0001000000 - > 0002695878] > #4 [00026b6000 - 000f7d7600] RAMDISK ==> [00026b6000 - > 000f7d7600] > #5 [000f7d8000 - 0010f42000] XEN START INFO ==> [000f7d8000 - > 0010f42000] > #6 [0002696000 - 0002696149] BRK ==> [0002696000 - > 0002696149] > #7 [0000100000 - 0000670000] PGTABLE ==> [0000100000 - > 0000670000] > #8 [0010fcf000 - 0011f40000] PGTABLE ==> [0010fcf000 - > 0011f40000] > #9 [0000010000 - 0000016840] MEMNODEMAP ==> [0000010000 - > 0000016840] > Bootmem setup node 2 00000001c0000000-00000002ed0cf000 > NODE_DATA [00000001c0000000 - 00000001c0017fff] > bootmap [00000001c0018000 - 00000001c003da1f] pages 26 > (10 early reservations) ==> bootmem [01c0000000 - 02ed0cf000] > #0 [0000000000 - 0000001000] BIOS data page > #1 [0010f42000 - 0010fcf000] XEN PAGETABLES > #2 [0000006000 - 0000008000] TRAMPOLINE > #3 [0001000000 - 0002695878] TEXT DATA BSS > #4 [00026b6000 - 000f7d7600] RAMDISK > #5 [000f7d8000 - 0010f42000] XEN START INFO > #6 [0002696000 - 0002696149] BRK > #7 [0000100000 - 0000670000] PGTABLE > #8 [0010fcf000 - 0011f40000] PGTABLE > #9 [0000010000 - 0000016840] MEMNODEMAP > found SMP MP-table at [ffff8800000ff780] ff780 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x002ed0cf > Movable zone start PFN for each node > early_node_map[4] active PFN ranges > 0: 0x00000010 -> 0x0000009a > 0: 0x00000100 -> 0x000bf760 > 0: 0x00100000 -> 0x001c0000 > 2: 0x001c0000 -> 0x002ed0cf > On node 0 totalpages: 1570538 > DMA zone: 104 pages used for memmap > DMA zone: 1401 pages reserved > DMA zone: 2473 pages, LIFO batch:0 > DMA32 zone: 26520 pages used for memmap > DMA32 zone: 753608 pages, LIFO batch:31 > Normal zone: 19968 pages used for memmap > Normal zone: 766464 pages, LIFO batch:31 > On node 2 totalpages: 1233103 > Normal zone: 31310 pages used for memmap > Normal zone: 1201793 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled) > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled) > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled) > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled) > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled) > ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled) > ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ERROR: Unable to locate IOAPIC for GSI 2 > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) > ERROR: Unable to locate IOAPIC for GSI 20 > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0xffffffff base: 0xfed00000 > SMP: Allowing 16 CPUs, 0 hotplug CPUs > nr_irqs_gsi: 256 > PM: Registered nosave memory: 000000000009a000 - 0000000000100000 > PM: Registered nosave memory: 00000000bf760000 - 00000000bf76e000 > PM: Registered nosave memory: 00000000bf76e000 - 00000000bf770000 > PM: Registered nosave memory: 00000000bf770000 - 00000000bf77e000 > PM: Registered nosave memory: 00000000bf77e000 - 00000000bf7d0000 > PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 > PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000 > PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000 > PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 > PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 > PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 > PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 > PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 > Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) > Booting paravirtualized kernel on Xen > Xen version: 4.0.1-rc1 (preserve-AD) (dom0) > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:3 > PERCPU: Embedded 478 pages/cpu @ffff880032052000 s1927128 r8192 d22568 > u1957888 > pcpu-alloc: s1927128 r8192 d22568 u1957888 alloc=478*4096 > pcpu-alloc: [0] 00 [0] 02 [0] 04 [0] 06 [0] 08 [0] 10 [0] 12 [0] 14 > pcpu-alloc: [1] 01 [1] 03 [1] 05 [1] 07 [1] 09 [1] 11 [1] 13 [1] 15 > trying to map vcpu_info 0 at ffff88003205d020, mfn 15205d, offset 32 > cpu 0 using vcpu_info at ffff88003205d020 > trying to map vcpu_info 1 at ffff8801c7c58020, mfn 2e7c58, offset 32 > cpu 1 using vcpu_info at ffff8801c7c58020 > trying to map vcpu_info 2 at ffff88003223b020, mfn 15223b, offset 32 > cpu 2 using vcpu_info at ffff88003223b020 > trying to map vcpu_info 3 at ffff8801c7e36020, mfn 2e7e36, offset 32 > cpu 3 using vcpu_info at ffff8801c7e36020 > trying to map vcpu_info 4 at ffff880032419020, mfn 152419, offset 32 > cpu 4 using vcpu_info at ffff880032419020 > trying to map vcpu_info 5 at ffff8801c8014020, mfn 2e8014, offset 32 > cpu 5 using vcpu_info at ffff8801c8014020 > trying to map vcpu_info 6 at ffff8800325f7020, mfn 1525f7, offset 32 > cpu 6 using vcpu_info at ffff8800325f7020 > trying to map vcpu_info 7 at ffff8801c81f2020, mfn 2e81f2, offset 32 > cpu 7 using vcpu_info at ffff8801c81f2020 > trying to map vcpu_info 8 at ffff8800327d5020, mfn 1527d5, offset 32 > cpu 8 using vcpu_info at ffff8800327d5020 > trying to map vcpu_info 9 at ffff8801c83d0020, mfn 2e83d0, offset 32 > cpu 9 using vcpu_info at ffff8801c83d0020 > trying to map vcpu_info 10 at ffff8800329b3020, mfn 1529b3, offset 32 > cpu 10 using vcpu_info at ffff8800329b3020 > trying to map vcpu_info 11 at ffff8801c85ae020, mfn 2e85ae, offset 32 > cpu 11 using vcpu_info at ffff8801c85ae020 > trying to map vcpu_info 12 at ffff880032b91020, mfn 152b91, offset 32 > cpu 12 using vcpu_info at ffff880032b91020 > trying to map vcpu_info 13 at ffff8801c878c020, mfn 2e878c, offset 32 > cpu 13 using vcpu_info at ffff8801c878c020 > trying to map vcpu_info 14 at ffff880032d6f020, mfn 152d6f, offset 32 > cpu 14 using vcpu_info at ffff880032d6f020 > trying to map vcpu_info 15 at ffff8801c896a020, mfn 2e896a, offset 32 > cpu 15 using vcpu_info at ffff8801c896a020 > Xen: using vcpu_info placement > Built 2 zonelists in Zone order, mobility grouping on. Total pages: > 2724338 > Policy zone: Normal > Kernel command line: root=/dev/mapper/MISC-fedora ro nomodeset > console=hvc0 earlyprintk=xen debug initcall_debug loglvel=10 > PID hash table entries: 4096 (order: 3, 32768 bytes) > Initializing CPU#0 > DMA: Placing 64MB software IO TLB between ffff880020000000 - > ffff880024000000 > DMA: software IO TLB at phys 0x20000000 - 0x24000000 > xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 > xen_swiotlb_fixup: buf=ffff880024060000 size=32768 > Memory: 10546768k/12272444k available (4727k kernel code, 1057880k > absent, 667796k reserved, 3359k data, 3380k init) > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=3 > Hierarchical RCU implementation. > NR_IRQS:4352 nr_irqs:4352 > xen: --> irq=0 > xen: --> irq=1 > xen: --> irq=2 > xen: --> irq=3 > xen: --> irq=4 > xen: --> irq=5 > xen: --> irq=6 > xen: --> irq=7 > xen: --> irq=8 > xen: --> irq=9 > xen: --> irq=10 > xen: --> irq=11 > xen: --> irq=12 > xen: --> irq=13 > xen: --> irq=14 > xen: --> irq=15 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) > xen: sci override: source_irq=9 global_irq=20 trigger=c polarity=3 > xen: registering gsi 20 triggering 0 polarity 1 > alloc irq_desc for 20 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=20 > xen: acpi sci 20 > Console: colour VGA+ 80x25 > console [hvc0] enabled, bootconsole disabled > console [hvc0] enabled, bootconsole disabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 > ... MAX_LOCK_DEPTH: 48 > ... MAX_LOCKDEP_KEYS: 8191 > ... CLASSHASH_SIZE: 4096 > ... MAX_LOCKDEP_ENTRIES: 16384 > ... MAX_LOCKDEP_CHAINS: 32768 > ... CHAINHASH_SIZE: 16384 > memory used by lock dependency info: 6367 kB > per task-struct memory footprint: 2688 bytes > allocated 112721920 bytes of page_cgroup > please try 'cgroup_disable=memory' option if you don't want memory > cgroups > ODEBUG: 24 of 24 active objects replaced > Xen: using vcpuop timer interface > installing Xen timer for CPU 0 > alloc irq_desc for 4351 on node 0 > alloc kstat_irqs on node 0 > Detected 2266.784 MHz processor. > Calibrating delay loop (skipped), value calculated using timer > frequency.. 4533.56 BogoMIPS (lpj=2266784) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) > Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys memory > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 0/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 9 MCE banks > Performance Events: unsupported p6 CPU model 26 no PMU driver, software > events only. > lockdep: fixing up alternatives. > SMP alternatives: switching to UP code > ACPI: Core revision 20090903 > ftrace: converting mcount calls to 0f 1f 44 00 00 > ftrace: allocating 22950 entries in 91 pages > alloc irq_desc for 4350 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4349 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4348 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4347 on node 0 > alloc kstat_irqs on node 0 > calling migration_init+0x0/0x59 @ 1 > initcall migration_init+0x0/0x59 returned 0 after 976 usecs > calling spawn_ksoftirqd+0x0/0x5a @ 1 > initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 976 usecs > calling init_call_single_data+0x0/0xad @ 1 > initcall init_call_single_data+0x0/0xad returned 0 after 0 usecs > calling spawn_softlockup_task+0x0/0x75 @ 1 > initcall spawn_softlockup_task+0x0/0x75 returned 0 after 976 usecs > calling relay_init+0x0/0x14 @ 1 > initcall relay_init+0x0/0x14 returned 0 after 0 usecs > calling tracer_alloc_buffers+0x0/0x218 @ 1 > initcall tracer_alloc_buffers+0x0/0x218 returned 0 after 976 usecs > calling init_trace_printk+0x0/0x12 @ 1 > initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs > calling trace_workqueue_early_init+0x0/0x137 @ 1 > initcall trace_workqueue_early_init+0x0/0x137 returned 0 after 976 usecs > calling mce_amd_init+0x0/0x33 @ 1 > initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs > installing Xen timer for CPU 1 > alloc irq_desc for 4346 on node 0 > alloc kstat_irqs on node 0 > lockdep: fixing up alternatives. > SMP alternatives: switching to SMP code > alloc irq_desc for 4345 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4344 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4343 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4342 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#1 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 1/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 0 > installing Xen timer for CPU 2 > alloc irq_desc for 4341 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4340 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4339 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4338 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4337 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#2 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 2/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > installing Xen timer for CPU 3 > alloc irq_desc for 4336 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4335 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4334 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4333 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4332 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#3 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 3/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 1 > installing Xen timer for CPU 4 > alloc irq_desc for 4331 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4330 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4329 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4328 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4327 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#4 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 4/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 2 > installing Xen timer for CPU 5 > alloc irq_desc for 4326 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4325 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4324 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4323 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4322 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#5 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 5/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 2 > installing Xen timer for CPU 6 > alloc irq_desc for 4321 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4320 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4319 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4318 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4317 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#6 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 6/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 3 > installing Xen timer for CPU 7 > alloc irq_desc for 4316 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4315 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4314 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4313 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4312 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#7 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 7/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 3 > installing Xen timer for CPU 8 > alloc irq_desc for 4311 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4310 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4309 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4308 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4307 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#8 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 8/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > installing Xen timer for CPU 9 > alloc irq_desc for 4306 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4305 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4304 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4303 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4302 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#9 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 9/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 0 > installing Xen timer for CPU 10 > alloc irq_desc for 4301 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4300 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4299 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4298 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4297 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#10 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 10/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > installing Xen timer for CPU 11 > alloc irq_desc for 4296 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4295 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4294 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4293 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4292 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#11 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 11/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 1 > installing Xen timer for CPU 12 > alloc irq_desc for 4291 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4290 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4289 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4288 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4287 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#12 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 12/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 2 > installing Xen timer for CPU 13 > alloc irq_desc for 4286 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4285 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4284 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4283 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4282 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#13 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 13/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 2 > installing Xen timer for CPU 14 > alloc irq_desc for 4281 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4280 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4279 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4278 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4277 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#14 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 14/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 3 > installing Xen timer for CPU 15 > alloc irq_desc for 4276 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4275 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4274 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4273 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4272 on node 0 > alloc kstat_irqs on node 0 > Initializing CPU#15 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 256K > CPU: L3 cache: 8192K > CPU 15/0x0 -> Node 0 > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 3 > Brought up 16 CPUs > CPU0 attaching sched-domain: > domain 0: span 0,8 level SIBLING > groups: 0 (cpu_power = 589) 8 (cpu_power = 589) > domain 1: span 0,8 level MC > groups: 0,8 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 > (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 > (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU1 attaching sched-domain: > domain 0: span 1,9 level SIBLING > groups: 1 (cpu_power = 589) 9 (cpu_power = 589) > domain 1: span 1,9 level MC > groups: 1,9 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 > (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 > (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU2 attaching sched-domain: > domain 0: span 2,10 level SIBLING > groups: 2 (cpu_power = 589) 10 (cpu_power = 589) > domain 1: span 2,10 level MC > groups: 2,10 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 > (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 > (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU3 attaching sched-domain: > domain 0: span 3,11 level SIBLING > groups: 3 (cpu_power = 589) 11 (cpu_power = 589) > domain 1: span 3,11 level MC > groups: 3,11 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 > (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 > (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU4 attaching sched-domain: > domain 0: span 4,12 level SIBLING > groups: 4 (cpu_power = 589) 12 (cpu_power = 589) > domain 1: span 4,12 level MC > groups: 4,12 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 > (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 > (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU5 attaching sched-domain: > domain 0: span 5,13 level SIBLING > groups: 5 (cpu_power = 589) 13 (cpu_power = 589) > domain 1: span 5,13 level MC > groups: 5,13 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 > (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 > (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU6 attaching sched-domain: > domain 0: span 6,14 level SIBLING > groups: 6 (cpu_power = 589) 14 (cpu_power = 589) > domain 1: span 6,14 level MC > groups: 6,14 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 > (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 > (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU7 attaching sched-domain: > domain 0: span 7,15 level SIBLING > groups: 7 (cpu_power = 589) 15 (cpu_power = 589) > domain 1: span 7,15 level MC > groups: 7,15 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 > (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 > (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU8 attaching sched-domain: > domain 0: span 0,8 level SIBLING > groups: 8 (cpu_power = 589) 0 (cpu_power = 589) > domain 1: span 0,8 level MC > groups: 0,8 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 > (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 > (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU9 attaching sched-domain: > domain 0: span 1,9 level SIBLING > groups: 9 (cpu_power = 589) 1 (cpu_power = 589) > domain 1: span 1,9 level MC > groups: 1,9 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 > (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 > (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU10 attaching sched-domain: > domain 0: span 2,10 level SIBLING > groups: 10 (cpu_power = 589) 2 (cpu_power = 589) > domain 1: span 2,10 level MC > groups: 2,10 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 > (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 > (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU11 attaching sched-domain: > domain 0: span 3,11 level SIBLING > groups: 11 (cpu_power = 589) 3 (cpu_power = 589) > domain 1: span 3,11 level MC > groups: 3,11 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 > (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 > (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU12 attaching sched-domain: > domain 0: span 4,12 level SIBLING > groups: 12 (cpu_power = 589) 4 (cpu_power = 589) > domain 1: span 4,12 level MC > groups: 4,12 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 > (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 > (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU13 attaching sched-domain: > domain 0: span 5,13 level SIBLING > groups: 13 (cpu_power = 589) 5 (cpu_power = 589) > domain 1: span 5,13 level MC > groups: 5,13 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 > (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 > (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU14 attaching sched-domain: > domain 0: span 6,14 level SIBLING > groups: 14 (cpu_power = 589) 6 (cpu_power = 589) > domain 1: span 6,14 level MC > groups: 6,14 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 0,8 > (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 > (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > CPU15 attaching sched-domain: > domain 0: span 7,15 level SIBLING > groups: 15 (cpu_power = 589) 7 (cpu_power = 589) > domain 1: span 7,15 level MC > groups: 7,15 (cpu_power = 1178) > domain 2: span 0-15 level CPU > groups: 7,15 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 > (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 4,12 > (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) > domain 3: span 0-15 level NODE > groups: 0-15 (cpu_power = 9424) > calling init_mmap_min_addr+0x0/0x26 @ 1 > initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs > calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 > initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after > 0 usecs > calling net_ns_init+0x0/0xf8 @ 1 > initcall net_ns_init+0x0/0xf8 returned 0 after 976 usecs > calling e820_mark_nvs_memory+0x0/0x40 @ 1 > initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 976 usecs > calling cpufreq_tsc+0x0/0x28 @ 1 > initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs > calling pci_reboot_init+0x0/0x14 @ 1 > initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs > calling init_lapic_sysfs+0x0/0x2d @ 1 > initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs > calling alloc_frozen_cpus+0x0/0xd @ 1 > initcall alloc_frozen_cpus+0x0/0xd returned 0 after 0 usecs > calling sysctl_init+0x0/0x32 @ 1 > initcall sysctl_init+0x0/0x32 returned 0 after 976 usecs > calling ksysfs_init+0x0/0xbb @ 1 > initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs > calling async_init+0x0/0x60 @ 1 > initcall async_init+0x0/0x60 returned 0 after 976 usecs > calling init_jiffies_clocksource+0x0/0x12 @ 1 > initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs > calling pm_init+0x0/0x34 @ 1 > initcall pm_init+0x0/0x34 returned 0 after 0 usecs > calling pm_disk_init+0x0/0x19 @ 1 > initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs > calling swsusp_header_init+0x0/0x31 @ 1 > initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs > calling init_zero_pfn+0x0/0x35 @ 1 > initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs > calling filelock_init+0x0/0x2e @ 1 > initcall filelock_init+0x0/0x2e returned 0 after 976 usecs > calling init_misc_binfmt+0x0/0x42 @ 1 > initcall init_misc_binfmt+0x0/0x42 returned 0 after 0 usecs > calling init_script_binfmt+0x0/0x14 @ 1 > initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs > calling init_elf_binfmt+0x0/0x14 @ 1 > initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs > calling init_compat_elf_binfmt+0x0/0x14 @ 1 > initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs > calling debugfs_init+0x0/0x5a @ 1 > initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs > calling securityfs_init+0x0/0x51 @ 1 > initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs > calling random32_init+0x0/0xd7 @ 1 > initcall random32_init+0x0/0xd7 returned 0 after 0 usecs > calling __gnttab_init+0x0/0x26 @ 1 > Grant table initialized > initcall __gnttab_init+0x0/0x26 returned 0 after 976 usecs > calling regulator_init+0x0/0x2e @ 1 > regulator: core version 0.5 > initcall regulator_init+0x0/0x2e returned 0 after 0 usecs > calling early_resume_init+0x0/0x19d @ 1 > Time: 11:17:44 Date: 05/30/10 > initcall early_resume_init+0x0/0x19d returned 0 after 0 usecs > calling cpufreq_core_init+0x0/0xa2 @ 1 > initcall cpufreq_core_init+0x0/0xa2 returned 0 after 0 usecs > calling cpuidle_init+0x0/0x40 @ 1 > initcall cpuidle_init+0x0/0x40 returned 0 after 976 usecs > calling sock_init+0x0/0x5e @ 1 > initcall sock_init+0x0/0x5e returned 0 after 976 usecs > calling net_inuse_init+0x0/0x26 @ 1 > initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs > calling netpoll_init+0x0/0x41 @ 1 > initcall netpoll_init+0x0/0x41 returned 0 after 0 usecs > calling netlink_proto_init+0x0/0x142 @ 1 > NET: Registered protocol family 16 > initcall netlink_proto_init+0x0/0x142 returned 0 after 976 usecs > calling bdi_class_init+0x0/0x41 @ 1 > initcall bdi_class_init+0x0/0x41 returned 0 after 976 usecs > calling kobject_uevent_init+0x0/0x54 @ 1 > initcall kobject_uevent_init+0x0/0x54 returned 0 after 976 usecs > calling pcibus_class_init+0x0/0x19 @ 1 > initcall pcibus_class_init+0x0/0x19 returned 0 after 976 usecs > calling pci_driver_init+0x0/0x12 @ 1 > initcall pci_driver_init+0x0/0x12 returned 0 after 976 usecs > calling backlight_class_init+0x0/0x5d @ 1 > initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs > calling __xenbus_probe_init+0x0/0x21 @ 1 > alloc irq_desc for 4271 on node 0 > alloc kstat_irqs on node 0 > initcall __xenbus_probe_init+0x0/0x21 returned 0 after 1952 usecs > calling tty_class_init+0x0/0x38 @ 1 > initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs > calling vtconsole_class_init+0x0/0xc3 @ 1 > initcall vtconsole_class_init+0x0/0xc3 returned 0 after 976 usecs > calling register_node_type+0x0/0x7e @ 1 > initcall register_node_type+0x0/0x7e returned 0 after 976 usecs > calling amd_postcore_init+0x0/0x78 @ 1 > initcall amd_postcore_init+0x0/0x78 returned 0 after 0 usecs > calling arch_kdebugfs_init+0x0/0x272 @ 1 > initcall arch_kdebugfs_init+0x0/0x272 returned 0 after 0 usecs > calling mtrr_if_init+0x0/0x63 @ 1 > initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs > calling ffh_cstate_init+0x0/0x2a @ 1 > initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs > calling arch_init_ftrace_syscalls+0x0/0x11e @ 1 > initcall arch_init_ftrace_syscalls+0x0/0x11e returned 0 after 976 usecs > calling acpi_pci_init+0x0/0x5c @ 1 > ACPI: bus type pci registered > initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs > calling register_xen_pci_notifier+0x0/0x24 @ 1 > initcall register_xen_pci_notifier+0x0/0x24 returned 0 after 0 usecs > calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 > initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs > calling dmi_id_init+0x0/0x34c @ 1 > initcall dmi_id_init+0x0/0x34c returned 0 after 976 usecs > calling dma_bus_init+0x0/0x3f @ 1 > initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs > calling dma_channel_table_init+0x0/0x10e @ 1 > initcall dma_channel_table_init+0x0/0x10e returned 0 after 0 usecs > calling pci_arch_init+0x0/0x60 @ 1 > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 for base access > initcall pci_arch_init+0x0/0x60 returned 0 after 0 usecs > calling topology_init+0x0/0x97 @ 1 > initcall topology_init+0x0/0x97 returned 0 after 976 usecs > calling mtrr_init_finialize+0x0/0x3d @ 1 > initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs > calling param_sysfs_init+0x0/0x23a @ 1 > initcall param_sysfs_init+0x0/0x23a returned 0 after 7811 usecs > calling pm_sysrq_init+0x0/0x1e @ 1 > initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs > calling audit_watch_init+0x0/0x2f @ 1 > initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs > calling init_slow_work+0x0/0x37 @ 1 > initcall init_slow_work+0x0/0x37 returned 0 after 0 usecs > calling default_bdi_init+0x0/0xc6 @ 1 > initcall default_bdi_init+0x0/0xc6 returned 0 after 976 usecs > calling init_bio+0x0/0xce @ 1 > bio: create slab <bio-0> at 0 > initcall init_bio+0x0/0xce returned 0 after 3905 usecs > calling fsnotify_init+0x0/0x12 @ 1 > initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs > calling fsnotify_notification_init+0x0/0x100 @ 1 > initcall fsnotify_notification_init+0x0/0x100 returned 0 after 976 usecs > calling cryptomgr_init+0x0/0x12 @ 1 > initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs > calling blk_settings_init+0x0/0x2a @ 1 > initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs > calling blk_ioc_init+0x0/0x2a @ 1 > initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs > calling blk_softirq_init+0x0/0x70 @ 1 > initcall blk_softirq_init+0x0/0x70 returned 0 after 0 usecs > calling blk_iopoll_setup+0x0/0x70 @ 1 > initcall blk_iopoll_setup+0x0/0x70 returned 0 after 0 usecs > calling genhd_device_init+0x0/0x7b @ 1 > initcall genhd_device_init+0x0/0x7b returned 0 after 2929 usecs > calling blk_dev_integrity_init+0x0/0x2a @ 1 > initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs > calling pci_slot_init+0x0/0x4c @ 1 > initcall pci_slot_init+0x0/0x4c returned 0 after 0 usecs > calling fbmem_init+0x0/0x98 @ 1 > initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs > calling acpi_init+0x0/0x2d1 @ 1 > ERROR: Unable to locate IOAPIC for GSI 20 > ACPI: EC: Look up EC in DSDT > ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, > expected Buffer (20090903/nspredef-1006) > \_SB_:_OSC evaluation returned wrong type > _OSC request data:1 6 > ACPI: Executed 1 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG at e0000000 - efffffff > ACPI Warning: Incorrect checksum in table [OEMB] - 54, should be 51 > (20090903/tbutils-314) > ACPI Warning: Incorrect checksum in table [ ] - 50, should be 94 > (20090903/tbutils-314) > initcall acpi_init+0x0/0x2d1 returned 0 after 158183 usecs > calling dock_init+0x0/0x8d @ 1 > ACPI: No dock devices found. > initcall dock_init+0x0/0x8d returned 0 after 0 usecs > calling acpi_pci_root_init+0x0/0x28 @ 1 > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:00.0: PME# supported from D0 D3hot D3cold > pci 0000:00:00.0: PME# disabled > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: PME# disabled > pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > pci 0000:00:03.0: PME# disabled > pci 0000:00:07.0: PME# supported from D0 D3hot D3cold > pci 0000:00:07.0: PME# disabled > pci 0000:00:16.0: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff] > pci 0000:00:16.1: reg 10 64bit mmio: [0xfbbf8000-0xfbbfbfff] > pci 0000:00:16.2: reg 10 64bit mmio: [0xfbbf4000-0xfbbf7fff] > pci 0000:00:16.3: reg 10 64bit mmio: [0xfbbf0000-0xfbbf3fff] > pci 0000:00:16.4: reg 10 64bit mmio: [0xfbbec000-0xfbbeffff] > pci 0000:00:16.5: reg 10 64bit mmio: [0xfbbe8000-0xfbbebfff] > pci 0000:00:16.6: reg 10 64bit mmio: [0xfbbe4000-0xfbbe7fff] > pci 0000:00:16.7: reg 10 64bit mmio: [0xfbbe0000-0xfbbe3fff] > pci 0000:00:1a.0: reg 20 io port: [0xac00-0xac1f] > pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f] > pci 0000:00:1a.2: reg 20 io port: [0xa800-0xa81f] > pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbbde000-0xfbbde3ff] > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.7: PME# disabled > pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbbd8000-0xfbbdbfff] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.5: PME# disabled > pci 0000:00:1d.0: reg 20 io port: [0xa480-0xa49f] > pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f] > pci 0000:00:1d.2: reg 20 io port: [0xa080-0xa09f] > pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbbdc000-0xfbbdc3ff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0097) > pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] > pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] > pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] > pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] > pci 0000:00:1f.2: reg 20 io port: [0x9480-0x949f] > pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbbd6000-0xfbbd67ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbbd4000-0xfbbd40ff] > pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] > pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff] > pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] > pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff] > pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f] > pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf3fe0000-0xf3ffffff] > pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] > pci 0000:00:01.0: bridge 32bit mmio: [0xf3f00000-0xf6ffffff] > pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] > pci 0000:03:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] > pci 0000:03:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] > pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] > pci 0000:03:00.0: reg 24 io port: [0xcc00-0xcc7f] > pci 0000:03:00.0: reg 30 32bit mmio pref: [0xf7fe0000-0xf7ffffff] > pci 0000:00:07.0: bridge io port: [0xc000-0xcfff] > pci 0000:00:07.0: bridge 32bit mmio: [0xf7f00000-0xfaffffff] > pci 0000:00:07.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] > pci 0000:04:00.0: PME# supported from D0 D3hot D3cold > pci 0000:04:00.0: PME# disabled > pci 0000:04:00.2: PME# supported from D0 D3hot D3cold > pci 0000:04:00.2: PME# disabled > pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable > it with 'pcie_aspm=force' > pci 0000:00:1c.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] > pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff] > pci 0000:05:0e.0: reg 10 32bit mmio pref: [0xf2ff0000-0xf2ffffff] > pci 0000:05:0e.0: reg 18 32bit mmio: [0xfbce0000-0xfbcfffff] > pci 0000:05:0e.0: reg 30 32bit mmio pref: [0xfbcd0000-0xfbcd7fff] > pci 0000:05:0e.0: supports D1 > pci 0000:04:00.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] > pci 0000:04:00.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff] > pci 0000:07:00.0: reg 10 32bit mmio: [0xfbde0000-0xfbdfffff] > pci 0000:07:00.0: reg 18 io port: [0xdc00-0xdc1f] > pci 0000:07:00.0: reg 1c 32bit mmio: [0xfbddc000-0xfbddffff] > pci 0000:07:00.0: PME# supported from D0 D3hot D3cold > pci 0000:07:00.0: PME# disabled > pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] > pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] > pci 0000:08:00.0: reg 10 32bit mmio: [0xfbee0000-0xfbefffff] > pci 0000:08:00.0: reg 18 io port: [0xec00-0xec1f] > pci 0000:08:00.0: reg 1c 32bit mmio: [0xfbedc000-0xfbedffff] > pci 0000:08:00.0: PME# supported from D0 D3hot D3cold > pci 0000:08:00.0: PME# disabled > pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] > pci 0000:00:1c.5: bridge 32bit mmio: [0xfbe00000-0xfbefffff] > pci 0000:00:1e.0: transparent bridge > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:01.0 > (XEN) PCI add device 00:03.0 > (XEN) PCI add device 00:07.0 > (XEN) PCI add device 00:14.0 > (XEN) PCI add device 00:14.1 > (XEN) PCI add device 00:14.2 > (XEN) PCI add device 00:14.3 > (XEN) PCI add device 00:16.0 > (XEN) PCI add device 00:16.1 > (XEN) PCI add device 00:16.2 > (XEN) PCI add device 00:16.3 > (XEN) PCI add device 00:16.4 > (XEN) PCI add device 00:16.5 > (XEN) PCI add device 00:16.6 > (XEN) PCI add device 00:16.7 > (XEN) PCI add device 00:1a.0 > (XEN) PCI add device 00:1a.1 > (XEN) PCI add device 00:1a.2 > (XEN) PCI add device 00:1a.7 > (XEN) PCI add device 00:1b.0 > (XEN) PCI add device 00:1c.0 > (XEN) PCI add device 00:1c.4 > (XEN) PCI add device 00:1c.5 > (XEN) PCI add device 00:1d.0 > (XEN) PCI add device 00:1d.1 > (XEN) PCI add device 00:1d.2 > (XEN) PCI add device 00:1d.7 > (XEN) PCI add device 00:1e.0 > (XEN) PCI add device 00:1f.0 > (XEN) PCI add device 00:1f.2 > (XEN) PCI add device 00:1f.3 > (XEN) PCI add device 01:00.0 > (XEN) PCI add device 03:00.0 > (XEN) PCI add device 04:00.0 > (XEN) PCI add device 04:00.2 > (XEN) PCI add device 05:0e.0 > (XEN) PCI add device 07:00.0 > (XEN) PCI add device 08:00.0 > initcall acpi_pci_root_init+0x0/0x28 returned 0 after 89843 usecs > calling acpi_pci_link_init+0x0/0x43 @ 1 > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) > initcall acpi_pci_link_init+0x0/0x43 returned 0 after 4882 usecs > calling pnp_init+0x0/0x12 @ 1 > initcall pnp_init+0x0/0x12 returned 0 after 0 usecs > calling __setup_shutdown_event+0x0/0x2a @ 1 > initcall __setup_shutdown_event+0x0/0x2a returned 0 after 0 usecs > calling xen_pcpu_init+0x0/0xa7 @ 1 > sync cpu 0 get result 1 max_id f > sync cpu 1 get result 1 max_id f > sync cpu 2 get result 1 max_id f > sync cpu 3 get result 1 max_id f > sync cpu 4 get result 1 max_id f > sync cpu 5 get result 1 max_id f > sync cpu 6 get result 1 max_id f > sync cpu 7 get result 1 max_id f > sync cpu 8 get result 1 max_id f > sync cpu 9 get result 1 max_id f > sync cpu a get result 1 max_id f > sync cpu b get result 1 max_id f > sync cpu c get result 1 max_id f > sync cpu d get result 1 max_id f > sync cpu e get result 1 max_id f > sync cpu f get result 1 max_id f > alloc irq_desc for 4270 on node 0 > alloc kstat_irqs on node 0 > initcall xen_pcpu_init+0x0/0xa7 returned 4270 after 16601 usecs > initcall xen_pcpu_init+0x0/0xa7 returned with error code 4270 > calling xenbus_probe_backend_init+0x0/0x64 @ 1 > initcall xenbus_probe_backend_init+0x0/0x64 returned 0 after 976 usecs > calling xenbus_probe_frontend_init+0x0/0x64 @ 1 > initcall xenbus_probe_frontend_init+0x0/0x64 returned 0 after 0 usecs > calling balloon_init+0x0/0x208 @ 1 > xen_balloon: Initialising balloon driver with page order 0. > initcall balloon_init+0x0/0x208 returned 0 after 0 usecs > calling xen_acpi_processor_extcntl_init+0x0/0x4f @ 1 > initcall xen_acpi_processor_extcntl_init+0x0/0x4f returned 0 after 0 > usecs > calling misc_init+0x0/0xb7 @ 1 > initcall misc_init+0x0/0xb7 returned 0 after 0 usecs > calling vga_arb_device_init+0x0/0x78 @ 1 > vgaarb: device added: PCI:0000:01:00.0,decodes=io > +mem,owns=none,locks=none > vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io > +mem,locks=none > vgaarb: loaded > initcall vga_arb_device_init+0x0/0x78 returned 0 after 976 usecs > calling cn_init+0x0/0xa3 @ 1 > initcall cn_init+0x0/0xa3 returned 0 after 976 usecs > calling init_scsi+0x0/0x91 @ 1 > SCSI subsystem initialized > initcall init_scsi+0x0/0x91 returned 0 after 976 usecs > calling ata_init+0x0/0x390 @ 1 > libata version 3.00 loaded. > initcall ata_init+0x0/0x390 returned 0 after 1953 usecs > calling phy_init+0x0/0x31 @ 1 > initcall phy_init+0x0/0x31 returned 0 after 976 usecs > calling init_pcmcia_cs+0x0/0x36 @ 1 > initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs > calling usb_init+0x0/0x1b2 @ 1 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > initcall usb_init+0x0/0x1b2 returned 0 after 1953 usecs > calling serio_init+0x0/0x89 @ 1 > initcall serio_init+0x0/0x89 returned 0 after 976 usecs > calling input_init+0x0/0x13d @ 1 > initcall input_init+0x0/0x13d returned 0 after 0 usecs > calling rtc_init+0x0/0x71 @ 1 > initcall rtc_init+0x0/0x71 returned 0 after 976 usecs > calling power_supply_class_init+0x0/0x38 @ 1 > initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs > calling thermal_init+0x0/0x58 @ 1 > initcall thermal_init+0x0/0x58 returned 0 after 0 usecs > calling md_init+0x0/0xd0 @ 1 > initcall md_init+0x0/0xd0 returned 0 after 0 usecs > calling leds_init+0x0/0x40 @ 1 > initcall leds_init+0x0/0x40 returned 0 after 0 usecs > calling pci_subsys_init+0x0/0x11a @ 1 > PCI: Using ACPI for IRQ routing > initcall pci_subsys_init+0x0/0x11a returned 0 after 0 usecs > calling proto_init+0x0/0x12 @ 1 > initcall proto_init+0x0/0x12 returned 0 after 0 usecs > calling net_dev_init+0x0/0x1a1 @ 1 > initcall net_dev_init+0x0/0x1a1 returned 0 after 976 usecs > calling neigh_init+0x0/0x71 @ 1 > initcall neigh_init+0x0/0x71 returned 0 after 0 usecs > calling fib_rules_init+0x0/0xa6 @ 1 > initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs > calling pktsched_init+0x0/0xd0 @ 1 > initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs > calling tc_filter_init+0x0/0x4c @ 1 > initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs > calling tc_action_init+0x0/0x4c @ 1 > initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs > calling genl_init+0x0/0x8f @ 1 > initcall genl_init+0x0/0x8f returned 0 after 976 usecs > calling cipso_v4_init+0x0/0x88 @ 1 > initcall cipso_v4_init+0x0/0x88 returned 0 after 0 usecs > calling wireless_nlevent_init+0x0/0x12 @ 1 > initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs > calling netlbl_init+0x0/0x81 @ 1 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs > calling sysctl_init+0x0/0x49 @ 1 > initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs > calling xen_mc_debugfs+0x0/0x118 @ 1 > initcall xen_mc_debugfs+0x0/0x118 returned 0 after 976 usecs > calling xen_mmu_debugfs+0x0/0x2be @ 1 > initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 976 usecs > calling print_all_ICs+0x0/0x567 @ 1 > initcall print_all_ICs+0x0/0x567 returned 0 after 976 usecs > calling hpet_late_init+0x0/0x1d1 @ 1 > initcall hpet_late_init+0x0/0x1d1 returned -19 after 0 usecs > calling init_k8_nbs+0x0/0x28 @ 1 > initcall init_k8_nbs+0x0/0x28 returned 0 after 0 usecs > calling clocksource_done_booting+0x0/0x5e @ 1 > Switching to clocksource xen > kstop/0 used greatest stack depth: 6296 bytes left > initcall clocksource_done_booting+0x0/0x5e returned 0 after 8895 usecs > calling ftrace_init_debugfs+0x0/0x241 @ 1 > initcall ftrace_init_debugfs+0x0/0x241 returned 0 after 653 usecs > calling rb_init_debugfs+0x0/0x2f @ 1 > initcall rb_init_debugfs+0x0/0x2f returned 0 after 18 usecs > calling tracer_init_debugfs+0x0/0x347 @ 1 > initcall tracer_init_debugfs+0x0/0x347 returned 0 after 2609 usecs > calling init_trace_printk_function_export+0x0/0x2f @ 1 > initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 18 > usecs > calling stat_workqueue_init+0x0/0x2d @ 1 > initcall stat_workqueue_init+0x0/0x2d returned 0 after 21 usecs > calling event_trace_init+0x0/0x1ed @ 1 > initcall event_trace_init+0x0/0x1ed returned 0 after 87492 usecs > calling init_pipe_fs+0x0/0x4d @ 1 > initcall init_pipe_fs+0x0/0x4d returned 0 after 212 usecs > calling eventpoll_init+0x0/0xda @ 1 > initcall eventpoll_init+0x0/0xda returned 0 after 121 usecs > calling anon_inode_init+0x0/0x128 @ 1 > initcall anon_inode_init+0x0/0x128 returned 0 after 142 usecs > calling blk_scsi_ioctl_init+0x0/0x297 @ 1 > initcall blk_scsi_ioctl_init+0x0/0x297 returned 0 after 0 usecs > calling acpi_event_init+0x0/0x80 @ 1 > initcall acpi_event_init+0x0/0x80 returned 0 after 155 usecs > calling pnpacpi_init+0x0/0x8c @ 1 > pnp: PnP ACPI init > ACPI: bus type pnp registered > xen: registering gsi 8 triggering 1 polarity 0 > xen_allocate_pirq: returning irq 8 for gsi 8 > xen: --> irq=8 > xen: registering gsi 13 triggering 1 polarity 0 > xen_allocate_pirq: returning irq 13 for gsi 13 > xen: --> irq=13 > xen: registering gsi 4 triggering 1 polarity 0 > xen_allocate_pirq: returning irq 4 for gsi 4 > xen: --> irq=4 > Already setup the GSI :4 > xen: registering gsi 3 triggering 1 polarity 0 > xen_allocate_pirq: returning irq 3 for gsi 3 > xen: --> irq=3 > pnp: PnP ACPI: found 14 devices > ACPI: ACPI bus type pnp unregistered > initcall pnpacpi_init+0x0/0x8c returned 0 after 72877 usecs > calling pnp_system_init+0x0/0x12 @ 1 > system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:06: ioport range 0xa00-0xa0f has been reserved > system 00:06: ioport range 0x290-0x29f has been reserved > system 00:07: ioport range 0xca2-0xca3 has been reserved > system 00:07: ioport range 0xcf8-0xcff could not be reserved > system 00:07: ioport range 0x4d0-0x4d1 has been reserved > system 00:07: ioport range 0x800-0x87f has been reserved > system 00:07: ioport range 0x500-0x57f could not be reserved > system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved > system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved > system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved > system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved > system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved > system 00:0d: iomem range 0xc0000-0xcffff could not be reserved > system 00:0d: iomem range 0xe0000-0xfffff could not be reserved > system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved > initcall pnp_system_init+0x0/0x12 returned 0 after 93585 usecs > calling pcistub_init+0x0/0x1e7 @ 1 > initcall pcistub_init+0x0/0x1e7 returned 0 after 1622 usecs > calling chr_dev_init+0x0/0xc7 @ 1 > initcall chr_dev_init+0x0/0xc7 returned 0 after 922 usecs > calling firmware_class_init+0x0/0x79 @ 1 > initcall firmware_class_init+0x0/0x79 returned 0 after 96 usecs > calling init_pcmcia_bus+0x0/0x84 @ 1 > initcall init_pcmcia_bus+0x0/0x84 returned 0 after 124 usecs > calling cpufreq_gov_performance_init+0x0/0x12 @ 1 > initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 16 usecs > calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 > initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 2 usecs > calling init_acpi_pm_clocksource+0x0/0xef @ 1 > PM-Timer failed consistency check (0x0xffffff) - aborting. > initcall init_acpi_pm_clocksource+0x0/0xef returned -19 after 9691 usecs > calling pcibios_assign_resources+0x0/0x74 @ 1 > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: 0xb000-0xbfff > pci 0000:00:01.0: MEM window: 0xf3f00000-0xf6ffffff > pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff > pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:03.0: IO window: disabled > pci 0000:00:03.0: MEM window: disabled > pci 0000:00:03.0: PREFETCH window: disabled > pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 > pci 0000:00:07.0: IO window: 0xc000-0xcfff > pci 0000:00:07.0: MEM window: 0xf7f00000-0xfaffffff > pci 0000:00:07.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff > pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 > pci 0000:04:00.0: IO window: disabled > pci 0000:04:00.0: MEM window: 0xfbc00000-0xfbcfffff > pci 0000:04:00.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff > pci 0000:04:00.2: PCI bridge, secondary bus 0000:06 > pci 0000:04:00.2: IO window: disabled > pci 0000:04:00.2: MEM window: disabled > pci 0000:04:00.2: PREFETCH window: disabled > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 > pci 0000:00:1c.0: IO window: 0x1000-0x1fff > pci 0000:00:1c.0: MEM window: 0xfbc00000-0xfbcfffff > pci 0000:00:1c.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff > pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 > pci 0000:00:1c.4: IO window: 0xd000-0xdfff > pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff > pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff > pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 > pci 0000:00:1c.5: IO window: 0xe000-0xefff > pci 0000:00:1c.5: MEM window: 0xfbe00000-0xfbefffff > pci 0000:00:1c.5: PREFETCH window: 0x000000f0200000-0x000000f03fffff > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 > pci 0000:00:1e.0: IO window: disabled > pci 0000:00:1e.0: MEM window: disabled > pci 0000:00:1e.0: PREFETCH window: disabled > pci 0000:00:01.0: setting latency timer to 64 > pci 0000:00:03.0: setting latency timer to 64 > pci 0000:00:07.0: setting latency timer to 64 > pci 0000:00:1c.0: enabling device (0106 -> 0107) > xen: registering gsi 17 triggering 0 polarity 1 > alloc irq_desc for 17 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=17 > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:04:00.0: setting latency timer to 64 > pci 0000:04:00.2: setting latency timer to 64 > xen: registering gsi 17 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 17 for gsi 17 > xen: --> irq=17 > Already setup the GSI :17 > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > alloc irq_desc for 16 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=16 > pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.5: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > pci_bus 0000:00: resource 0 io: [0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] > pci_bus 0000:01: resource 1 mem: [0xf3f00000-0xf6ffffff] > pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] > pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] > pci_bus 0000:03: resource 1 mem: [0xf7f00000-0xfaffffff] > pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff] > pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] > pci_bus 0000:04: resource 1 mem: [0xfbc00000-0xfbcfffff] > pci_bus 0000:04: resource 2 pref mem [0xf2f00000-0xf2ffffff] > pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff] > pci_bus 0000:05: resource 2 pref mem [0xf2f00000-0xf2ffffff] > pci_bus 0000:07: resource 0 io: [0xd000-0xdfff] > pci_bus 0000:07: resource 1 mem: [0xfbd00000-0xfbdfffff] > pci_bus 0000:07: resource 2 pref mem [0xf0000000-0xf01fffff] > pci_bus 0000:08: resource 0 io: [0xe000-0xefff] > pci_bus 0000:08: resource 1 mem: [0xfbe00000-0xfbefffff] > pci_bus 0000:08: resource 2 pref mem [0xf0200000-0xf03fffff] > pci_bus 0000:09: resource 3 io: [0x00-0xffff] > pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] > initcall pcibios_assign_resources+0x0/0x74 returned 0 after 361318 usecs > calling sysctl_core_init+0x0/0x38 @ 1 > initcall sysctl_core_init+0x0/0x38 returned 0 after 105 usecs > calling inet_init+0x0/0x209 @ 1 > NET: Registered protocol family 2 > IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) > TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) > TCP: Hash tables configured (established 524288 bind 65536) > TCP reno registered > initcall inet_init+0x0/0x209 returned 0 after 40865 usecs > calling af_unix_init+0x0/0x55 @ 1 > NET: Registered protocol family 1 > initcall af_unix_init+0x0/0x55 returned 0 after 3095 usecs > calling pci_apply_final_quirks+0x0/0x36 @ 1 > pci 0000:03:00.0: Boot video device > pci 0000:04:00.0: rerouting interrupts for [8086:0370] > pci 0000:04:00.2: rerouting interrupts for [8086:0372] > initcall pci_apply_final_quirks+0x0/0x36 returned 0 after 13680 usecs > calling populate_rootfs+0x0/0x263 @ 1 > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 214149k freed > initcall populate_rootfs+0x0/0x263 returned 0 after 592711 usecs > calling pci_iommu_init+0x0/0x50 @ 1 > DMA-API: preallocated 32768 debug entries > DMA-API: debugging enabled by kernel config > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > DMA: Placing 64MB software IO TLB between ffff880020000000 - > ffff880024000000 > DMA: software IO TLB at phys 0x20000000 - 0x24000000 > initcall pci_iommu_init+0x0/0x50 returned 0 after 61360 usecs > calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1 > initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs > calling i8259A_init_sysfs+0x0/0x22 @ 1 > initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 109 usecs > calling vsyscall_init+0x0/0x6c @ 1 > initcall vsyscall_init+0x0/0x6c returned 0 after 117 usecs > calling sbf_init+0x0/0xef @ 1 > initcall sbf_init+0x0/0xef returned 0 after 0 usecs > calling i8237A_init_sysfs+0x0/0x22 @ 1 > initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 80 usecs > calling add_rtc_cmos+0x0/0xc4 @ 1 > initcall add_rtc_cmos+0x0/0xc4 returned 0 after 3 usecs > calling cache_sysfs_init+0x0/0x67 @ 1 > initcall cache_sysfs_init+0x0/0x67 returned 0 after 6102 usecs > calling mce_init_device+0x0/0x109 @ 1 > initcall mce_init_device+0x0/0x109 returned 0 after 2029 usecs > calling threshold_init_device+0x0/0x98 @ 1 > initcall threshold_init_device+0x0/0x98 returned 0 after 1 usecs > calling thermal_throttle_init_device+0x0/0x93 @ 1 > initcall thermal_throttle_init_device+0x0/0x93 returned 0 after 0 usecs > calling msr_init+0x0/0x14c @ 1 > initcall msr_init+0x0/0x14c returned 0 after 1693 usecs > calling cpuid_init+0x0/0x14c @ 1 > initcall cpuid_init+0x0/0x14c returned 0 after 1636 usecs > calling ioapic_init_sysfs+0x0/0xa7 @ 1 > initcall ioapic_init_sysfs+0x0/0xa7 returned 0 after 114 usecs > calling add_pcspkr+0x0/0x28 @ 1 > initcall add_pcspkr+0x0/0x28 returned 0 after 77 usecs > calling audit_classes_init+0x0/0xaf @ 1 > initcall audit_classes_init+0x0/0xaf returned 0 after 13 usecs > calling pt_dump_init+0x0/0x30 @ 1 > initcall pt_dump_init+0x0/0x30 returned 0 after 66 usecs > calling init_vdso_vars+0x0/0x220 @ 1 > initcall init_vdso_vars+0x0/0x220 returned 0 after 46 usecs > calling ia32_binfmt_init+0x0/0x14 @ 1 > initcall ia32_binfmt_init+0x0/0x14 returned 0 after 32 usecs > calling sysenter_setup+0x0/0x2df @ 1 > initcall sysenter_setup+0x0/0x2df returned 0 after 3 usecs > calling init_sched_debug_procfs+0x0/0x2c @ 1 > initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 15 usecs > calling proc_schedstat_init+0x0/0x22 @ 1 > initcall proc_schedstat_init+0x0/0x22 returned 0 after 10 usecs > calling proc_execdomains_init+0x0/0x22 @ 1 > initcall proc_execdomains_init+0x0/0x22 returned 0 after 10 usecs > calling ioresources_init+0x0/0x3c @ 1 > initcall ioresources_init+0x0/0x3c returned 0 after 50 usecs > calling uid_cache_init+0x0/0x8d @ 1 > initcall uid_cache_init+0x0/0x8d returned 0 after 71 usecs > calling init_posix_timers+0x0/0x19f @ 1 > initcall init_posix_timers+0x0/0x19f returned 0 after 66 usecs > calling init_posix_cpu_timers+0x0/0xe5 @ 1 > initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs > calling nsproxy_cache_init+0x0/0x2d @ 1 > initcall nsproxy_cache_init+0x0/0x2d returned 0 after 88 usecs > calling create_proc_profile+0x0/0x282 @ 1 > initcall create_proc_profile+0x0/0x282 returned 0 after 0 usecs > calling timekeeping_init_device+0x0/0x22 @ 1 > initcall timekeeping_init_device+0x0/0x22 returned 0 after 81 usecs > calling init_clocksource_sysfs+0x0/0x50 @ 1 > initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 113 usecs > calling init_timer_list_procfs+0x0/0x2c @ 1 > initcall init_timer_list_procfs+0x0/0x2c returned 0 after 11 usecs > calling init_tstats_procfs+0x0/0x2c @ 1 > initcall init_tstats_procfs+0x0/0x2c returned 0 after 10 usecs > calling lockdep_proc_init+0x0/0x7c @ 1 > initcall lockdep_proc_init+0x0/0x7c returned 0 after 38 usecs > calling futex_init+0x0/0xbe @ 1 > initcall futex_init+0x0/0xbe returned 0 after 71 usecs > calling proc_dma_init+0x0/0x22 @ 1 > initcall proc_dma_init+0x0/0x22 returned 0 after 11 usecs > calling proc_modules_init+0x0/0x22 @ 1 > initcall proc_modules_init+0x0/0x22 returned 0 after 10 usecs > calling kallsyms_init+0x0/0x25 @ 1 > initcall kallsyms_init+0x0/0x25 returned 0 after 10 usecs > calling snapshot_device_init+0x0/0x12 @ 1 > initcall snapshot_device_init+0x0/0x12 returned 0 after 83 usecs > calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 > initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs > calling crash_notes_memory_init+0x0/0x38 @ 1 > initcall crash_notes_memory_init+0x0/0x38 returned 0 after 11 usecs > calling pid_namespaces_init+0x0/0x2d @ 1 > initcall pid_namespaces_init+0x0/0x2d returned 0 after 100 usecs > calling ikconfig_init+0x0/0x39 @ 1 > initcall ikconfig_init+0x0/0x39 returned 0 after 11 usecs > calling audit_init+0x0/0x153 @ 1 > audit: initializing netlink socket (disabled) > type=2000 audit(1275218265.439:1): initialized > initcall audit_init+0x0/0x153 returned 0 after 8236 usecs > calling audit_tree_init+0x0/0x49 @ 1 > initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs > calling init_kprobes+0x0/0x19e @ 1 > initcall init_kprobes+0x0/0x19e returned 0 after 12070 usecs > calling hung_task_init+0x0/0x53 @ 1 > initcall hung_task_init+0x0/0x53 returned 0 after 203 usecs > calling utsname_sysctl_init+0x0/0x14 @ 1 > initcall utsname_sysctl_init+0x0/0x14 returned 0 after 83 usecs > calling init_tracepoints+0x0/0x17 @ 1 > initcall init_tracepoints+0x0/0x17 returned 0 after 0 usecs > calling init_lstats_procfs+0x0/0x25 @ 1 > initcall init_lstats_procfs+0x0/0x25 returned 0 after 12 usecs > calling ftrace_mod_cmd_init+0x0/0x12 @ 1 > initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 18 usecs > calling init_events+0x0/0x63 @ 1 > initcall init_events+0x0/0x63 returned 0 after 11 usecs > calling init_sched_switch_trace+0x0/0x12 @ 1 > initcall init_sched_switch_trace+0x0/0x12 returned 0 after 3 usecs > calling init_stack_trace+0x0/0x12 @ 1 > initcall init_stack_trace+0x0/0x12 returned 0 after 1 usecs > calling init_function_trace+0x0/0x3e @ 1 > initcall init_function_trace+0x0/0x3e returned 0 after 3 usecs > calling init_wakeup_tracer+0x0/0x22 @ 1 > initcall init_wakeup_tracer+0x0/0x22 returned 0 after 3 usecs > calling stack_trace_init+0x0/0x6b @ 1 > initcall stack_trace_init+0x0/0x6b returned 0 after 38 usecs > calling init_mmio_trace+0x0/0x12 @ 1 > initcall init_mmio_trace+0x0/0x12 returned 0 after 1 usecs > calling init_graph_trace+0x0/0x32 @ 1 > initcall init_graph_trace+0x0/0x32 returned 0 after 2 usecs > calling init_kmem_tracer+0x0/0x56 @ 1 > initcall init_kmem_tracer+0x0/0x56 returned 0 after 4 usecs > calling init_blk_tracer+0x0/0x57 @ 1 > initcall init_blk_tracer+0x0/0x57 returned 0 after 3 usecs > calling perf_event_sysfs_init+0x0/0x19 @ 1 > initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 14 usecs > calling init_per_zone_wmark_min+0x0/0x68 @ 1 > initcall init_per_zone_wmark_min+0x0/0x68 returned 0 after 899 usecs > calling kswapd_init+0x0/0x78 @ 1 > initcall kswapd_init+0x0/0x78 returned 0 after 336 usecs > calling setup_vmstat+0x0/0xc3 @ 1 > initcall setup_vmstat+0x0/0xc3 returned 0 after 180 usecs > calling mm_sysfs_init+0x0/0x29 @ 1 > initcall mm_sysfs_init+0x0/0x29 returned 0 after 9 usecs > calling proc_vmalloc_init+0x0/0x25 @ 1 > initcall proc_vmalloc_init+0x0/0x25 returned 0 after 10 usecs > calling procswaps_init+0x0/0x22 @ 1 > initcall procswaps_init+0x0/0x22 returned 0 after 10 usecs > calling hugetlb_init+0x0/0x3c8 @ 1 > HugeTLB registered 2 MB page size, pre-allocated 0 pages > initcall hugetlb_init+0x0/0x3c8 returned 0 after 5058 usecs > calling slab_proc_init+0x0/0x25 @ 1 > initcall slab_proc_init+0x0/0x25 returned 0 after 11 usecs > calling slab_sysfs_init+0x0/0xf0 @ 1 > initcall slab_sysfs_init+0x0/0xf0 returned 0 after 17492 usecs > calling fasync_init+0x0/0x2a @ 1 > initcall fasync_init+0x0/0x2a returned 0 after 247 usecs > calling proc_filesystems_init+0x0/0x22 @ 1 > initcall proc_filesystems_init+0x0/0x22 returned 0 after 12 usecs > calling dnotify_init+0x0/0x80 @ 1 > initcall dnotify_init+0x0/0x80 returned 0 after 546 usecs > calling inotify_setup+0x0/0x12 @ 1 > initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs > calling inotify_user_setup+0x0/0xbe @ 1 > initcall inotify_user_setup+0x0/0xbe returned 0 after 651 usecs > calling aio_setup+0x0/0xa5 @ 1 > initcall aio_setup+0x0/0xa5 returned 0 after 3119 usecs > calling proc_locks_init+0x0/0x22 @ 1 > initcall proc_locks_init+0x0/0x22 returned 0 after 13 usecs > calling init_sys32_ioctl+0x0/0x85 @ 1 > initcall init_sys32_ioctl+0x0/0x85 returned 0 after 12 usecs > calling init_mbcache+0x0/0x14 @ 1 > initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs > calling dquot_init+0x0/0x105 @ 1 > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > initcall dquot_init+0x0/0x105 returned 0 after 8080 usecs > calling init_v2_quota_format+0x0/0x12 @ 1 > initcall init_v2_quota_format+0x0/0x12 returned 0 after 16 usecs > calling proc_cmdline_init+0x0/0x22 @ 1 > initcall proc_cmdline_init+0x0/0x22 returned 0 after 12 usecs > calling proc_cpuinfo_init+0x0/0x22 @ 1 > initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 10 usecs > calling proc_devices_init+0x0/0x22 @ 1 > initcall proc_devices_init+0x0/0x22 returned 0 after 43 usecs > calling proc_interrupts_init+0x0/0x22 @ 1 > initcall proc_interrupts_init+0x0/0x22 returned 0 after 10 usecs > calling proc_loadavg_init+0x0/0x22 @ 1 > initcall proc_loadavg_init+0x0/0x22 returned 0 after 10 usecs > calling proc_meminfo_init+0x0/0x22 @ 1 > initcall proc_meminfo_init+0x0/0x22 returned 0 after 10 usecs > calling proc_stat_init+0x0/0x22 @ 1 > initcall proc_stat_init+0x0/0x22 returned 0 after 10 usecs > calling proc_uptime_init+0x0/0x22 @ 1 > initcall proc_uptime_init+0x0/0x22 returned 0 after 10 usecs > calling proc_version_init+0x0/0x22 @ 1 > initcall proc_version_init+0x0/0x22 returned 0 after 10 usecs > calling proc_softirqs_init+0x0/0x22 @ 1 > initcall proc_softirqs_init+0x0/0x22 returned 0 after 10 usecs > calling proc_kcore_init+0x0/0xa9 @ 1 > initcall proc_kcore_init+0x0/0xa9 returned 0 after 31 usecs > calling vmcore_init+0x0/0x8d2 @ 1 > initcall vmcore_init+0x0/0x8d2 returned 0 after 0 usecs > calling proc_kmsg_init+0x0/0x25 @ 1 > initcall proc_kmsg_init+0x0/0x25 returned 0 after 10 usecs > calling proc_page_init+0x0/0x42 @ 1 > initcall proc_page_init+0x0/0x42 returned 0 after 19 usecs > calling init_devpts_fs+0x0/0x4c @ 1 > initcall init_devpts_fs+0x0/0x4c returned 0 after 239 usecs > calling init_ext3_fs+0x0/0x71 @ 1 > initcall init_ext3_fs+0x0/0x71 returned 0 after 568 usecs > calling init_ext4_fs+0x0/0xea @ 1 > initcall init_ext4_fs+0x0/0xea returned 0 after 1547 usecs > calling journal_init+0x0/0x93 @ 1 > initcall journal_init+0x0/0x93 returned 0 after 975 usecs > calling journal_init+0x0/0xec @ 1 > initcall journal_init+0x0/0xec returned 0 after 1124 usecs > calling init_ramfs_fs+0x0/0x12 @ 1 > initcall init_ramfs_fs+0x0/0x12 returned 0 after 3 usecs > calling init_hugetlbfs_fs+0x0/0x98 @ 1 > initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 444 usecs > calling init_iso9660_fs+0x0/0x71 @ 1 > initcall init_iso9660_fs+0x0/0x71 returned 0 after 306 usecs > calling init_nls_cp437+0x0/0x12 @ 1 > initcall init_nls_cp437+0x0/0x12 returned 0 after 16 usecs > calling init_nls_ascii+0x0/0x12 @ 1 > initcall init_nls_ascii+0x0/0x12 returned 0 after 1 usecs > calling ipc_init+0x0/0x23 @ 1 > msgmni has been set to 21017 > initcall ipc_init+0x0/0x23 returned 0 after 2645 usecs > calling ipc_sysctl_init+0x0/0x14 @ 1 > initcall ipc_sysctl_init+0x0/0x14 returned 0 after 140 usecs > calling init_mqueue_fs+0x0/0xc9 @ 1 > initcall init_mqueue_fs+0x0/0xc9 returned 0 after 600 usecs > calling key_proc_init+0x0/0x59 @ 1 > initcall key_proc_init+0x0/0x59 returned 0 after 23 usecs > calling selinux_nf_ip_init+0x0/0x60 @ 1 > SELinux: Registering netfilter hooks > initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 3407 usecs > calling init_sel_fs+0x0/0x68 @ 1 > initcall init_sel_fs+0x0/0x68 returned 0 after 996 usecs > calling selnl_init+0x0/0x4d @ 1 > initcall selnl_init+0x0/0x4d returned 0 after 54 usecs > calling sel_netif_init+0x0/0x66 @ 1 > initcall sel_netif_init+0x0/0x66 returned 0 after 6 usecs > calling sel_netnode_init+0x0/0x73 @ 1 > initcall sel_netnode_init+0x0/0x73 returned 0 after 2 usecs > calling sel_netport_init+0x0/0x73 @ 1 > initcall sel_netport_init+0x0/0x73 returned 0 after 9 usecs > calling aurule_init+0x0/0x37 @ 1 > initcall aurule_init+0x0/0x37 returned 0 after 0 usecs > calling crypto_wq_init+0x0/0x32 @ 1 > initcall crypto_wq_init+0x0/0x32 returned 0 after 2705 usecs > calling crypto_algapi_init+0x0/0xd @ 1 > initcall crypto_algapi_init+0x0/0xd returned 0 after 49 usecs > calling skcipher_module_init+0x0/0x35 @ 1 > initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs > calling chainiv_module_init+0x0/0x12 @ 1 > initcall chainiv_module_init+0x0/0x12 returned 0 after 37 usecs > calling eseqiv_module_init+0x0/0x12 @ 1 > initcall eseqiv_module_init+0x0/0x12 returned 0 after 2 usecs > calling hmac_module_init+0x0/0x12 @ 1 > initcall hmac_module_init+0x0/0x12 returned 0 after 1 usecs > calling md5_mod_init+0x0/0x12 @ 1 > cryptomgr_test used greatest stack depth: 5672 bytes left > initcall md5_mod_init+0x0/0x12 returned 0 after 415 usecs > calling sha1_generic_mod_init+0x0/0x12 @ 1 > initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 271 usecs > calling crc32c_mod_init+0x0/0x12 @ 1 > initcall crc32c_mod_init+0x0/0x12 returned 0 after 330 usecs > calling krng_mod_init+0x0/0x12 @ 1 > alg: No test for stdrng (krng) > initcall krng_mod_init+0x0/0x12 returned 0 after 212 usecs > calling proc_genhd_init+0x0/0x3c @ 1 > initcall proc_genhd_init+0x0/0x3c returned 0 after 24 usecs > calling bsg_init+0x0/0x132 @ 1 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > initcall bsg_init+0x0/0x132 returned 0 after 308 usecs > calling noop_init+0x0/0x14 @ 1 > io scheduler noop registered > initcall noop_init+0x0/0x14 returned 0 after 19 usecs > calling as_init+0x0/0x14 @ 1 > io scheduler anticipatory registered > initcall as_init+0x0/0x14 returned 0 after 2 usecs > calling deadline_init+0x0/0x14 @ 1 > io scheduler deadline registered > initcall deadline_init+0x0/0x14 returned 0 after 2 usecs > calling cfq_init+0x0/0x94 @ 1 > io scheduler cfq registered (default) > initcall cfq_init+0x0/0x94 returned 0 after 495 usecs > calling debug_objects_init_debugfs+0x0/0x64 @ 1 > initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 80 usecs > calling percpu_counter_startup+0x0/0x38 @ 1 > initcall percpu_counter_startup+0x0/0x38 returned 0 after 2 usecs > calling dynamic_debug_init+0x0/0x127 @ 1 > initcall dynamic_debug_init+0x0/0x127 returned 0 after 328 usecs > calling pci_proc_init+0x0/0x6b @ 1 > initcall pci_proc_init+0x0/0x6b returned 0 after 820 usecs > calling pcie_portdrv_init+0x0/0x4c @ 1 > alloc irq_desc for 4269 on node 0 > alloc kstat_irqs on node 0 > pcieport 0000:00:01.0: setting latency timer to 64 > alloc irq_desc for 4268 on node 0 > alloc kstat_irqs on node 0 > pcieport 0000:00:03.0: setting latency timer to 64 > alloc irq_desc for 4267 on node 0 > alloc kstat_irqs on node 0 > pcieport 0000:00:07.0: setting latency timer to 64 > alloc irq_desc for 4266 on node 0 > alloc kstat_irqs on node 0 > pcieport 0000:00:1c.0: setting latency timer to 64 > alloc irq_desc for 4265 on node 0 > alloc kstat_irqs on node 0 > pcieport 0000:00:1c.4: setting latency timer to 64 > alloc irq_desc for 4264 on node 0 > alloc kstat_irqs on node 0 > pcieport 0000:00:1c.5: setting latency timer to 64 > initcall pcie_portdrv_init+0x0/0x4c returned 0 after 4286 usecs > calling aer_service_init+0x0/0x2b @ 1 > aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC > support > aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC > support > aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC > support > initcall aer_service_init+0x0/0x2b returned 0 after 202 usecs > calling pci_hotplug_init+0x0/0x1d @ 1 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > initcall pci_hotplug_init+0x0/0x1d returned 0 after 1 usecs > calling pcied_init+0x0/0x79 @ 1 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > initcall pcied_init+0x0/0x79 returned 0 after 646 usecs > calling acpiphp_init+0x0/0x5f @ 1 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > initcall acpiphp_init+0x0/0x5f returned -19 after 2301 usecs > calling pci_stub_init+0x0/0x139 @ 1 > pci-stub: invalid id string "" > initcall pci_stub_init+0x0/0x139 returned 0 after 146 usecs > calling fb_console_init+0x0/0x11d @ 1 > cryptomgr_test used greatest stack depth: 5400 bytes left > initcall fb_console_init+0x0/0x11d returned 0 after 291391 usecs > calling xenfb_init+0x0/0x5d @ 1 > initcall xenfb_init+0x0/0x5d returned -19 after 0 usecs > calling vesafb_init+0x0/0x23a @ 1 > initcall vesafb_init+0x0/0x23a returned 0 after 195 usecs > calling efifb_init+0x0/0x1ed @ 1 > initcall efifb_init+0x0/0x1ed returned -19 after 4 usecs > calling acpi_reserve_resources+0x0/0xeb @ 1 > initcall acpi_reserve_resources+0x0/0xeb returned 0 after 9 usecs > calling irqrouter_init_sysfs+0x0/0x38 @ 1 > initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 78 usecs > calling acpi_ac_init+0x0/0x45 @ 1 > initcall acpi_ac_init+0x0/0x45 returned 0 after 182 usecs > calling acpi_button_init+0x0/0x56 @ 1 > input: Power Button > as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > initcall acpi_button_init+0x0/0x56 returned 0 after 18361 usecs > calling acpi_fan_init+0x0/0x56 @ 1 > initcall acpi_fan_init+0x0/0x56 returned 0 after 124 usecs > calling acpi_pci_slot_init+0x0/0x20 @ 1 > initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 1902 usecs > calling acpi_processor_init+0x0/0x132 @ 1 > ACPI: SSDT 00000000bf77e1e0 02B94 (v01 DpgPmm P001Ist 00000011 INTL > 20051117) > ACPI: SSDT 00000000bf780d80 00980 (v01 PmRef P001Cst 00003001 INTL > 20051117) > ACPI: SSDT 00000000bf781700 006E2 (v01 PmRef Cpu0Tst 00003000 INTL > 20051117) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > (XEN) Monitor-Mwait will be used to enter C-3 state > ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) > initcall acpi_processor_init+0x0/0x132 returned 0 after 629629 usecs > calling acpi_container_init+0x0/0x42 @ 1 > initcall acpi_container_init+0x0/0x42 returned 0 after 13724 usecs > calling acpi_thermal_init+0x0/0x7b @ 1 > initcall acpi_thermal_init+0x0/0x7b returned 0 after 169 usecs > calling acpi_battery_init+0x0/0x16 @ 1 > initcall acpi_battery_init+0x0/0x16 returned 0 after 30 usecs > calling 1_acpi_battery_init_async+0x0/0x3c @ 233 > initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 244 usecs > calling evtchn_init+0x0/0x7e @ 1 > Event-channel device installed. > initcall evtchn_init+0x0/0x7e returned 0 after 2902 usecs > calling gntdev_init+0x0/0x3d @ 1 > initcall gntdev_init+0x0/0x3d returned 0 after 117 usecs > calling pciback_init+0x0/0x15f @ 1 > initcall pciback_init+0x0/0x15f returned 0 after 4695 usecs > calling blkif_init+0x0/0x171 @ 1 > initcall blkif_init+0x0/0x171 returned 0 after 3660 usecs > calling blktap_init+0x0/0xa7 @ 1 > blktap_device_init: blktap device major 253 > blktap_ring_init: blktap ring major: 251 > initcall blktap_init+0x0/0xa7 returned 0 after 10464 usecs > calling netback_init+0x0/0x207 @ 1 > registering netback > initcall netback_init+0x0/0x207 returned 0 after 2961 usecs > calling hypervisor_subsys_init+0x0/0x25 @ 1 > initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs > calling hyper_sysfs_init+0x0/0xf2 @ 1 > initcall hyper_sysfs_init+0x0/0xf2 returned 0 after 79 usecs > calling platform_pci_module_init+0x0/0xa3 @ 1 > xen-platform-pcifailed backend handshake: unrecognised magic value > initcall platform_pci_module_init+0x0/0xa3 returned -19 after 5839 usecs > calling mcelog_init+0x0/0x1b0 @ 1 > alloc irq_desc for 4263 on node 0 > alloc kstat_irqs on node 0 > initcall mcelog_init+0x0/0x1b0 returned 0 after 6418 usecs > calling rand_initialize+0x0/0x31 @ 1 > initcall rand_initialize+0x0/0x31 returned 0 after 30 usecs > calling tty_init+0x0/0xf5 @ 1 > initcall tty_init+0x0/0xf5 returned 0 after 6277 usecs > calling pty_init+0x0/0x336 @ 1 > initcall pty_init+0x0/0x336 returned 0 after 243 usecs > calling sysrq_init+0x0/0x25 @ 1 > initcall sysrq_init+0x0/0x25 returned 0 after 14 usecs > calling xen_hvc_init+0x0/0xe2 @ 1 > alloc irq_desc for 4262 on node 0 > alloc kstat_irqs on node 0 > initcall xen_hvc_init+0x0/0xe2 returned 0 after 6895 usecs > calling raw_init+0x0/0xe5 @ 1 > initcall raw_init+0x0/0xe5 returned 0 after 149 usecs > calling hpet_init+0x0/0x6a @ 1 > hpet_acpi_add: no address or irqs in _CRS > initcall hpet_init+0x0/0x6a returned 0 after 4307 usecs > calling nvram_init+0x0/0x82 @ 1 > Non-volatile memory driver v1.3 > initcall nvram_init+0x0/0x82 returned 0 after 2886 usecs > calling agp_init+0x0/0x26 @ 1 > Linux agpgart interface v0.103 > initcall agp_init+0x0/0x26 returned 0 after 2792 usecs > calling agp_intel_init+0x0/0x29 @ 1 > initcall agp_intel_init+0x0/0x29 returned 0 after 111 usecs > calling agp_sis_init+0x0/0x29 @ 1 > initcall agp_sis_init+0x0/0x29 returned 0 after 133 usecs > calling agp_via_init+0x0/0x29 @ 1 > initcall agp_via_init+0x0/0x29 returned 0 after 101 usecs > calling init_tis+0x0/0x91 @ 1 > initcall init_tis+0x0/0x91 returned 0 after 65 usecs > calling cn_proc_init+0x0/0x3d @ 1 > initcall cn_proc_init+0x0/0x3d returned 0 after 45 usecs > calling serial8250_init+0x0/0x143 @ 1 > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > async_waiting @ 1 > async_continuing @ 1 after 10 usec > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > async_waiting @ 1 > async_continuing @ 1 after 1 usec > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > initcall serial8250_init+0x0/0x143 returned 0 after 308270 usecs > calling serial8250_pnp_init+0x0/0x12 @ 1 > 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > initcall serial8250_pnp_init+0x0/0x12 returned 0 after 5240 usecs > calling serial8250_pci_init+0x0/0x1b @ 1 > initcall serial8250_pci_init+0x0/0x1b returned 0 after 114 usecs > calling init_kgdboc+0x0/0x16 @ 1 > initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs > calling topology_sysfs_init+0x0/0x63 @ 1 > initcall topology_sysfs_init+0x0/0x63 returned 0 after 470 usecs > calling brd_init+0x0/0x16d @ 1 > brd: module loaded > initcall brd_init+0x0/0x16d returned 0 after 8259 usecs > calling loop_init+0x0/0x197 @ 1 > loop: module loaded > initcall loop_init+0x0/0x197 returned 0 after 4968 usecs > calling init_kgdbts+0x0/0x16 @ 1 > initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs > calling mac_hid_init+0x0/0xd5 @ 1 > input: Macintosh mouse button emulation as /devices/virtual/input/input2 > initcall mac_hid_init+0x0/0xd5 returned 0 after 6552 usecs > calling scsi_dh_init+0x0/0x3f @ 1 > initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs > calling init_sd+0x0/0x17b @ 1 > initcall init_sd+0x0/0x17b returned 0 after 420 usecs > calling init_sr+0x0/0x49 @ 1 > initcall init_sr+0x0/0x49 returned 0 after 51 usecs > calling init_sg+0x0/0x123 @ 1 > initcall init_sg+0x0/0x123 returned 0 after 136 usecs > calling ahci_init+0x0/0x1b @ 1 > ahci 0000:00:1f.2: version 3.0 > xen: registering gsi 19 triggering 0 polarity 1 > alloc irq_desc for 19 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=19 > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > alloc irq_desc for 4261 on node 0 > alloc kstat_irqs on node 0 > ahci: SSS flag set, parallel bus scan disabled > ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA > mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part > ccc ems sxs > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6100 irq 4261 > ata2: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6180 irq 4261 > ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > irq 4261 > ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > irq 4261 > ata5: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6300 irq 4261 > ata6: SATA max UDMA/133 abar m2048@0xfbbd6000 port 0xfbbd6380 irq 4261 > calling 2_async_port_probe+0x0/0xc9 @ 233 > initcall ahci_init+0x0/0x1b returned 0 after 109920 usecs > calling piix_init+0x0/0x29 @ 1 > initcall piix_init+0x0/0x29 returned 0 after 136 usecs > calling fixed_mdio_bus_init+0x0/0xd0 @ 1 > Fixed MDIO Bus: probed > initcall fixed_mdio_bus_init+0x0/0xd0 returned 0 after 189 usecs > calling net_olddevs_init+0x0/0x9e @ 1 > initcall net_olddevs_init+0x0/0x9e returned 0 after 3 usecs > calling netif_init+0x0/0x6a @ 1 > initcall netif_init+0x0/0x6a returned 0 after 0 usecs > calling cdrom_init+0x0/0x6a @ 1 > initcall cdrom_init+0x0/0x6a returned 0 after 195 usecs > calling mon_init+0x0/0x117 @ 1 > initcall mon_init+0x0/0x117 returned 0 after 283 usecs > calling ehci_hcd_init+0x0/0xc0 @ 1 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > xen: registering gsi 18 triggering 0 polarity 1 > alloc irq_desc for 18 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=18 > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > ehci_hcd 0000:00:1a.7: EHCI Host Controller > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.7: debug port 1 > ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbbde000 > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.32.13 ehci_hcd > usb usb1: SerialNumber: 0000:00:1a.7 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected > xen: registering gsi 23 triggering 0 polarity 1 > alloc irq_desc for 23 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=23 > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbbdc000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.32.13 ehci_hcd > usb usb2: SerialNumber: 0000:00:1d.7 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > initcall ehci_hcd_init+0x0/0xc0 returned 0 after 36306 usecs > calling ohci_hcd_mod_init+0x0/0x92 @ 1 > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > initcall ohci_hcd_mod_init+0x0/0x92 returned 0 after 121 usecs > calling uhci_hcd_init+0x0/0xc0 @ 1 > uhci_hcd: USB Universal Host Controller Interface driver > xen: registering gsi 16 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 16 for gsi 16 > xen: --> irq=16 > Already setup the GSI :16 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.32.13 uhci_hcd > usb usb3: SerialNumber: 0000:00:1a.0 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > xen: registering gsi 21 triggering 0 polarity 1 > alloc irq_desc for 21 on node 0 > alloc kstat_irqs on node 0 > xen: --> irq=21 > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > uhci_hcd 0000:00:1a.1: UHCI Host Controller > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.32.13 uhci_hcd > usb usb4: SerialNumber: 0000:00:1a.1 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > xen: registering gsi 19 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 19 for gsi 19 > xen: --> irq=19 > Already setup the GSI :19 > uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1a.2: setting latency timer to 64 > uhci_hcd 0000:00:1a.2: UHCI Host Controller > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.32.13 uhci_hcd > usb usb5: SerialNumber: 0000:00:1a.2 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > xen: registering gsi 23 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 23 for gsi 23 > xen: --> irq=23 > Already setup the GSI :23 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480 > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: UHCI Host Controller > usb usb6: Manufacturer: Linux 2.6.32.13 uhci_hcd > usb usb6: SerialNumber: 0000:00:1d.0 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > xen: registering gsi 19 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 19 for gsi 19 > xen: --> irq=19 > Already setup the GSI :19 > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: UHCI Host Controller > usb usb7: Manufacturer: Linux 2.6.32.13 uhci_hcd > usb usb7: SerialNumber: 0000:00:1d.1 > usb usb7: configuration #1 chosen from 1 choice > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > xen: registering gsi 18 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 18 for gsi 18 > xen: --> irq=18 > Already setup the GSI :18 > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080 > usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: Product: UHCI Host Controller > usb usb8: Manufacturer: Linux 2.6.32.13 uhci_hcd > usb usb8: SerialNumber: 0000:00:1d.2 > usb usb8: configuration #1 chosen from 1 choice > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > initcall uhci_hcd_init+0x0/0xc0 returned 0 after 27682 usecs > calling i8042_init+0x0/0x3a7 @ 1 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > initcall i8042_init+0x0/0x3a7 returned 0 after 3611 usecs > calling serport_init+0x0/0x34 @ 1 > initcall serport_init+0x0/0x34 returned 0 after 1 usecs > calling mousedev_init+0x0/0x62 @ 1 > mice: PS/2 mouse device common for all mice > initcall mousedev_init+0x0/0x62 returned 0 after 614 usecs > calling evdev_init+0x0/0x12 @ 1 > initcall evdev_init+0x0/0x12 returned 0 after 447 usecs > calling atkbd_init+0x0/0x27 @ 1 > initcall atkbd_init+0x0/0x27 returned 0 after 105 usecs > calling psmouse_init+0x0/0x74 @ 1 > initcall psmouse_init+0x0/0x74 returned 0 after 442 usecs > calling xenkbd_init+0x0/0x5d @ 1 > initcall xenkbd_init+0x0/0x5d returned -19 after 0 usecs > calling cmos_init+0x0/0x6d @ 1 > rtc_cmos 00:03: RTC can wake from S4 > rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram > initcall cmos_init+0x0/0x6d returned 0 after 619 usecs > calling dm_init+0x0/0x49 @ 1 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: > dm-devel@xxxxxxxxxx > initcall dm_init+0x0/0x49 returned 0 after 1824 usecs > calling dm_snapshot_init+0x0/0x26a @ 1 > initcall dm_snapshot_init+0x0/0x26a returned 0 after 898 usecs > calling dm_mirror_init+0x0/0x79 @ 1 > initcall dm_mirror_init+0x0/0x79 returned 0 after 252 usecs > calling dm_dirty_log_init+0x0/0x59 @ 1 > initcall dm_dirty_log_init+0x0/0x59 returned 0 after 16 usecs > calling dm_zero_init+0x0/0x31 @ 1 > initcall dm_zero_init+0x0/0x31 returned 0 after 1 usecs > calling init_ladder+0x0/0x12 @ 1 > cpuidle: using governor ladder > initcall init_ladder+0x0/0x12 returned 0 after 19 usecs > calling init_menu+0x0/0x12 @ 1 > cpuidle: using governor menu > initcall init_menu+0x0/0x12 returned 0 after 2 usecs > calling efivars_init+0x0/0x213 @ 1 > initcall efivars_init+0x0/0x213 returned -19 after 0 usecs > calling hid_init+0x0/0x66 @ 1 > initcall hid_init+0x0/0x66 returned 0 after 175 usecs > calling a4_init+0x0/0x1b @ 1 > initcall a4_init+0x0/0x1b returned 0 after 68 usecs > calling apple_init+0x0/0x38 @ 1 > initcall apple_init+0x0/0x38 returned 0 after 84 usecs > calling belkin_init+0x0/0x1b @ 1 > initcall belkin_init+0x0/0x1b returned 0 after 65 usecs > calling ch_init+0x0/0x1b @ 1 > initcall ch_init+0x0/0x1b returned 0 after 59 usecs > calling ch_init+0x0/0x1b @ 1 > initcall ch_init+0x0/0x1b returned 0 after 69 usecs > calling cp_init+0x0/0x1b @ 1 > initcall cp_init+0x0/0x1b returned 0 after 65 usecs > calling dr_init+0x0/0x1b @ 1 > initcall dr_init+0x0/0x1b returned 0 after 56 usecs > calling ez_init+0x0/0x1b @ 1 > initcall ez_init+0x0/0x1b returned 0 after 57 usecs > calling gyration_init+0x0/0x1b @ 1 > initcall gyration_init+0x0/0x1b returned 0 after 52 usecs > calling ks_init+0x0/0x1b @ 1 > initcall ks_init+0x0/0x1b returned 0 after 98 usecs > calling kye_init+0x0/0x1b @ 1 > initcall kye_init+0x0/0x1b returned 0 after 60 usecs > calling lg_init+0x0/0x1b @ 1 > initcall lg_init+0x0/0x1b returned 0 after 73 usecs > calling ms_init+0x0/0x1b @ 1 > initcall ms_init+0x0/0x1b returned 0 after 68 usecs > calling mr_init+0x0/0x1b @ 1 > initcall mr_init+0x0/0x1b returned 0 after 64 usecs > calling ntrig_init+0x0/0x1b @ 1 > initcall ntrig_init+0x0/0x1b returned 0 after 72 usecs > calling pl_init+0x0/0x1b @ 1 > initcall pl_init+0x0/0x1b returned 0 after 64 usecs > calling pl_init+0x0/0x1b @ 1 > initcall pl_init+0x0/0x1b returned 0 after 71 usecs > calling samsung_init+0x0/0x1b @ 1 > initcall samsung_init+0x0/0x1b returned 0 after 59 usecs > calling sjoy_init+0x0/0x1b @ 1 > initcall sjoy_init+0x0/0x1b returned 0 after 64 usecs > calling sony_init+0x0/0x1b @ 1 > initcall sony_init+0x0/0x1b returned 0 after 70 usecs > calling sp_init+0x0/0x1b @ 1 > initcall sp_init+0x0/0x1b returned 0 after 57 usecs > calling ga_init+0x0/0x1b @ 1 > initcall ga_init+0x0/0x1b returned 0 after 52 usecs > calling tm_init+0x0/0x1b @ 1 > initcall tm_init+0x0/0x1b returned 0 after 52 usecs > calling ts_init+0x0/0x1b @ 1 > initcall ts_init+0x0/0x1b returned 0 after 57 usecs > calling twinhan_init+0x0/0x1b @ 1 > initcall twinhan_init+0x0/0x1b returned 0 after 85 usecs > calling zp_init+0x0/0x1b @ 1 > initcall zp_init+0x0/0x1b returned 0 after 70 usecs > calling hid_init+0x0/0xcb @ 1 > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > initcall hid_init+0x0/0xcb returned 0 after 446 usecs > calling flow_cache_init+0x0/0x1b0 @ 1 > initcall flow_cache_init+0x0/0x1b0 returned 0 after 350 usecs > calling blackhole_module_init+0x0/0x12 @ 1 > initcall blackhole_module_init+0x0/0x12 returned 0 after 2 usecs > calling init_cgroup_cls+0x0/0x12 @ 1 > initcall init_cgroup_cls+0x0/0x12 returned 0 after 21 usecs > calling nf_conntrack_standalone_init+0x0/0x12 @ 1 > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option > or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 22301 > usecs > calling xt_init+0x0/0x190 @ 1 > initcall xt_init+0x0/0x190 returned 0 after 42 usecs > calling tcpudp_mt_init+0x0/0x17 @ 1 > initcall tcpudp_mt_init+0x0/0x17 returned 0 after 25 usecs > calling conntrack_mt_init+0x0/0x17 @ 1 > initcall conntrack_mt_init+0x0/0x17 returned 0 after 2 usecs > calling state_mt_init+0x0/0x17 @ 1 > initcall state_mt_init+0x0/0x17 returned 0 after 2 usecs > calling sysctl_ipv4_init+0x0/0x4e @ 1 > initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 2354 usecs > calling init_syncookies+0x0/0x19 @ 1 > initcall init_syncookies+0x0/0x19 returned 0 after 44 usecs > calling ipv4_netfilter_init+0x0/0x17 @ 1 > initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 16 usecs > calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1 > initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 506 > usecs > calling nf_defrag_init+0x0/0x17 @ 1 > initcall nf_defrag_init+0x0/0x17 returned 0 after 2 usecs > calling ip_tables_init+0x0/0xaf @ 1 > ip_tables: (C) 2000-2006 Netfilter Core Team > initcall ip_tables_init+0x0/0xaf returned 0 after 44 usecs > calling iptable_filter_init+0x0/0x6c @ 1 > initcall iptable_filter_init+0x0/0x6c returned 0 after 136 usecs > calling reject_tg_init+0x0/0x12 @ 1 > initcall reject_tg_init+0x0/0x12 returned 0 after 3 usecs > calling cubictcp_register+0x0/0x65 @ 1 > TCP cubic registered > initcall cubictcp_register+0x0/0x65 returned 0 after 3 usecs > calling xfrm_user_init+0x0/0x4d @ 1 > Initializing XFRM netlink socket > initcall xfrm_user_init+0x0/0x4d returned 0 after 49 usecs > calling packet_init+0x0/0x47 @ 1 > NET: Registered protocol family 17 > initcall packet_init+0x0/0x47 returned 0 after 45 usecs > calling dsa_init_module+0x0/0x14 @ 1 > initcall dsa_init_module+0x0/0x14 returned 0 after 1 usecs > calling edsa_init_module+0x0/0x14 @ 1 > initcall edsa_init_module+0x0/0x14 returned 0 after 1 usecs > calling trailer_init_module+0x0/0x14 @ 1 > initcall trailer_init_module+0x0/0x14 returned 0 after 1 usecs > calling mv88e6060_init+0x0/0x14 @ 1 > initcall mv88e6060_init+0x0/0x14 returned 0 after 14 usecs > calling mv88e6123_61_65_init+0x0/0x14 @ 1 > initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 1 usecs > calling mv88e6131_init+0x0/0x14 @ 1 > initcall mv88e6131_init+0x0/0x14 returned 0 after 1 usecs > calling dsa_init_module+0x0/0x12 @ 1 > initcall dsa_init_module+0x0/0x12 returned 0 after 73 usecs > calling dcbnl_init+0x0/0x32 @ 1 > initcall dcbnl_init+0x0/0x32 returned 0 after 0 usecs > calling mce_debugfs_init+0x0/0x3b @ 1 > initcall mce_debugfs_init+0x0/0x3b returned 0 after 46 usecs > calling severities_debugfs_init+0x0/0x3b @ 1 > initcall severities_debugfs_init+0x0/0x3b returned 0 after 18 usecs > calling hpet_insert_resource+0x0/0x23 @ 1 > initcall hpet_insert_resource+0x0/0x23 returned 0 after 3 usecs > calling update_mp_table+0x0/0x689 @ 1 > initcall update_mp_table+0x0/0x689 returned 0 after 0 usecs > calling lapic_insert_resource+0x0/0x40 @ 1 > initcall lapic_insert_resource+0x0/0x40 returned -1 after 0 usecs > initcall lapic_insert_resource+0x0/0x40 returned with error code -1 > calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 > initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs > calling io_apic_bug_finalize+0x0/0x1b @ 1 > initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs > calling check_early_ioremap_leak+0x0/0x67 @ 1 > initcall check_early_ioremap_leak+0x0/0x67 returned 0 after 0 usecs > calling pat_memtype_list_init+0x0/0x29 @ 1 > initcall pat_memtype_list_init+0x0/0x29 returned 0 after 19 usecs > calling sched_init_debug+0x0/0x24 @ 1 > initcall sched_init_debug+0x0/0x24 returned 0 after 18 usecs > calling init_oops_id+0x0/0x36 @ 1 > initcall init_oops_id+0x0/0x36 returned 0 after 8 usecs > calling disable_boot_consoles+0x0/0x5c @ 1 > initcall disable_boot_consoles+0x0/0x5c returned 0 after 0 usecs > calling pm_qos_power_init+0x0/0xca @ 1 > initcall pm_qos_power_init+0x0/0xca returned 0 after 352 usecs > calling test_suspend+0x0/0x19d @ 1 > initcall test_suspend+0x0/0x19d returned 0 after 0 usecs > calling software_resume+0x0/0x20f @ 1 > PM: Resume from disk failed. > initcall software_resume+0x0/0x20f returned -2 after 15 usecs > initcall software_resume+0x0/0x20f returned with error code -2 > calling debugfs_kprobe_init+0x0/0x8e @ 1 > initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 111 usecs > calling taskstats_init+0x0/0x95 @ 1 > registered taskstats version 1 > initcall taskstats_init+0x0/0x95 returned 0 after 35 usecs > calling clear_boot_tracer+0x0/0x2d @ 1 > initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs > calling fail_page_alloc_debugfs+0x0/0xe4 @ 1 > initcall fail_page_alloc_debugfs+0x0/0xe4 returned 0 after 193 usecs > calling max_swapfiles_check+0x0/0x8 @ 1 > initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs > calling failslab_debugfs_init+0x0/0x6b @ 1 > initcall failslab_debugfs_init+0x0/0x6b returned 0 after 135 usecs > calling init_ima+0x0/0x1a @ 1 > No TPM chip found, activating TPM-bypass! > initcall init_ima+0x0/0x1a returned 0 after 615 usecs > calling fail_make_request_debugfs+0x0/0x19 @ 1 > initcall fail_make_request_debugfs+0x0/0x19 returned 0 after 306 usecs > calling random32_reseed+0x0/0xa9 @ 1 > initcall random32_reseed+0x0/0xa9 returned 0 after 147 usecs > calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 > initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 6 > usecs > calling pci_sysfs_init+0x0/0x4c @ 1 > initcall pci_sysfs_init+0x0/0x4c returned 0 after 3427 usecs > calling boot_wait_for_devices+0x0/0x19 @ 1 > initcall boot_wait_for_devices+0x0/0x19 returned 0 after 1 usecs > calling regulator_init_complete+0x0/0x14b @ 1 > initcall regulator_init_complete+0x0/0x14b returned 0 after 16 usecs > calling seqgen_init+0x0/0xf @ 1 > initcall seqgen_init+0x0/0xf returned 0 after 46 usecs > calling late_resume_init+0x0/0x124 @ 1 > Magic number: 10:134:278 > tty tty15: hash matches > initcall late_resume_init+0x0/0x124 returned 0 after 92 usecs > calling scsi_complete_async_scans+0x0/0x148 @ 1 > initcall scsi_complete_async_scans+0x0/0x148 returned 0 after 0 usecs > calling rtc_hctosys+0x0/0x152 @ 1 > usb 2-1: new high speed USB device using ehci_hcd and address 2 > usb 2-1: New USB device found, idVendor=2001, idProduct=f103 > usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb 2-1: configuration #1 chosen from 1 choice > hub 2-1:1.0: USB hub found > hub 2-1:1.0: 7 ports detected > usb 2-1.2: new full speed USB device using ehci_hcd and address 4 > usb 2-1.2: New USB device found, idVendor=04e8, idProduct=326c > usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 2-1.2: Product: Samsung ML-2010 > usb 2-1.2: Manufacturer: Samsung > usb 2-1.2: SerialNumber: 3A61BKCL919879R. > usb 2-1.2: configuration #1 chosen from 1 choice > usb 6-2: new low speed USB device using uhci_hcd and address 2 > usb 6-2: New USB device found, idVendor=05af, idProduct=0408 > usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 > usb 6-2: Product: 2.4G USB RF KeyBoard > usb 6-2: configuration #1 chosen from 1 choice > input: 2.4G USB RF KeyBoard > as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input3 > generic-usb 0003:05AF:0408.0001: input,hidraw0: USB HID v1.10 Keyboard > [2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2/input0 > input: 2.4G USB RF KeyBoard > as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input4 > generic-usb 0003:05AF:0408.0002: input,hidraw1: USB HID v1.10 Mouse > [2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2/input1 > input: 2.4G USB RF KeyBoard > as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/input/input5 > rtc_cmos 00:03: setting system clock to 2010-05-30 11:17:51 UTC > (1275218271) > initcall rtc_hctosys+0x0/0x152 returned 0 after 1682629 usecs > calling memmap_init+0x0/0xa3 @ 1 > calling 3_async_port_probe+0x0/0xc9 @ 261 > generic-usb 0003:05AF:0408.0003: input,hiddev96,hidraw2: USB HID v1.10 > Device [2.4G USB RF KeyBoard] on usb-0000:00:1d.0-2/input2 > initcall memmap_init+0x0/0xa3 returned 0 after 811 usecs > calling pci_mmcfg_late_insert_resources+0x0/0x163 @ 1 > initcall pci_mmcfg_late_insert_resources+0x0/0x163 returned 0 after 8 > usecs > calling init_net_drop_monitor+0x0/0x17e @ 1 > Initalizing network drop monitor service > initcall init_net_drop_monitor+0x0/0x17e returned 0 after 290 usecs > calling tcp_congestion_default+0x0/0x12 @ 1 > initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs > calling initialize_hashrnd+0x0/0x19 @ 1 > initcall initialize_hashrnd+0x0/0x19 returned 0 after 7 usecs > async_waiting @ 1 > async_waiting @ 261 > calling 4_async_port_probe+0x0/0xc9 @ 262 > calling 5_async_port_probe+0x0/0xc9 @ 263 > async_waiting @ 263 > calling 6_async_port_probe+0x0/0xc9 @ 264 > async_waiting @ 264 > calling 7_async_port_probe+0x0/0xc9 @ 265 > async_waiting @ 265 > async_waiting @ 262 > ata1: SATA link down (SStatus 0 SControl 300) > async_waiting @ 233 > async_continuing @ 233 after 3 usec > initcall 2_async_port_probe+0x0/0xc9 returned 0 after 313154 usecs > async_continuing @ 261 after 236544 usec > ata2: SATA link down (SStatus 0 SControl 300) > async_waiting @ 261 > async_continuing @ 261 after 1 usec > initcall 3_async_port_probe+0x0/0xc9 returned 0 after 555507 usecs > async_continuing @ 262 after 536879 usec > ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata3.00: ATA-8: WDC WD7501AALS-00J7B1, 05.00K05, max UDMA/133 > ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > ata3.00: configured for UDMA/133 > async_waiting @ 262 > async_continuing @ 262 after 1 usec > scsi 2:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 > ANSI: 5 > calling 8_sd_probe_async+0x0/0x1e3 @ 261 > sd 2:0:0:0: Attached scsi generic sg0 type 0 > initcall 4_async_port_probe+0x0/0xc9 returned 0 after 1292146 usecs > async_continuing @ 263 after 1312855 usec > sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 sda3 > sd 2:0:0:0: [sda] Attached SCSI disk > initcall 8_sd_probe_async+0x0/0x1e3 returned 0 after 38221 usecs > ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 > ata4.00: configured for UDMA/100 > async_waiting @ 263 > async_continuing @ 263 after 2 usec > scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 > ANSI: 5 > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 3:0:0:0: Attached scsi CD-ROM sr0 > sr 3:0:0:0: Attached scsi generic sg1 type 5 > initcall 5_async_port_probe+0x0/0xc9 returned 0 after 2200976 usecs > async_continuing @ 264 after 2206705 usec > async/2 used greatest stack depth: 4248 bytes left > ata5: SATA link down (SStatus 0 SControl 300) > async_waiting @ 264 > async_continuing @ 264 after 1 usec > initcall 6_async_port_probe+0x0/0xc9 returned 0 after 2523975 usecs > async_continuing @ 265 after 2529786 usec > ata6: SATA link down (SStatus 0 SControl 300) > async_waiting @ 265 > async_continuing @ 265 after 1 usec > initcall 7_async_port_probe+0x0/0xc9 returned 0 after 2847040 usecs > async_continuing @ 1 after 2919764 usec > Freeing unused kernel memory: 3380k freed > Write protecting the kernel read-only data: 7004k > mLoading, please wait... > calling i2c_init+0x0/0x70 [i2c_core] @ 297 > initcall i2c_init+0x0/0x70 [i2c_core] returned 0 after 220 usecs > calling nvidiafb_init+0x0/0x25 [nvidiafb] @ 297 > nvidiafb 0000:01:00.0: enabling device (0140 -> 0143) > xen: registering gsi 16 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 16 for gsi 16 > xen: --> irq=16 > Already setup the GSI :16 > nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > nvidiafb: Device ID: 10de042f > nvidiafb: unknown NV_ARCH > xen: registering gsi 16 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 16 for gsi 16 > xen: --> irq=16 > Already setup the GSI :16 > nvidiafb 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > nvidiafb: Device ID: 10de06fd > nvidiafb: unknown NV_ARCH > initcall nvidiafb_init+0x0/0x25 [nvidiafb] returned 0 after 67706 usecs > calling megasas_init+0x0/0x16f [megaraid_sas] @ 666 > megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 > megasas: 0x1028:0x0015:0x1028:0x1f03: bus 5:slot 14:func 0 > xen: registering gsi 18 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 18 for gsi 18 > xen: --> irq=18 > Already setup the GSI :18 > megaraid_sas 0000:05:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > megasas: FW now in Ready state > calling e1000_init_module+0x0/0(XEN) [VT-D]iommu.c:821: > iommu_fault_status: Primary Pending Fault > x70 [e1000e] @ 6(XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device > [05:08.0] fault addr 2d0842000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > 76 > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2d0842 > scsi6 : LSI SAS (XEN) root_entry = ffff83013ff37000 > based MegaRAID d(XEN) root_entry[5] = 13cf13001 > river > (XEN) context = ffff83013cf13000 > initcall megasas(XEN) context[40] = 0_0 > _init+0x0/0x16f (XEN) ctxt_entry[40] not present > [megaraid_sas] r(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary > Pending Fault > eturned 0 after (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device > [05:08.0] fault addr 2d0842000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > 73201 usecs > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2d0842 > scsi scan: INQUI(XEN) root_entry = ffff83013ff37000 > RY result too sh(XEN) root_entry[5] = 13cf13001 > ort (5), using 3(XEN) context = ffff83013cf13000 > 6 > (XEN) context[40] = 0_0 > scsi 6:0:0:0: Di(XEN) ctxt_entry[40] not present > rect-Access PQ: 0 ANSI: 0 > scsi scan: INQUIRY result too short (5), using 36 > scsi 6:0:1:0: Direct-Access PQ: 0 > ANSI: 0 > scsi scan: INQUIRY result too short (5), using 36 > scsi 6:0:2:0: Direct-Access PQ: 0 > ANSI: 0 > scsi scan: INQUIRY result too short (5), using 36 > scsi 6:0:3:0: Direct-Access PQ: 0 > ANSI: 0 > scsi 6:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 > ANSI: 5 > e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 > e1000e: Copyright (c) 1999-2008 Intel Corporation. > e1000e 0000:07:00.0: Disabling L1 ASPM > xen: registering gsi 16 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 16 for gsi 16 > xen: --> irq=16 > Already setup the GSI :16 > e1000e 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > e1000e 0000:07:00.0: setting latency timer to 64 > alloc irq_desc for 4260 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4259 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4258 on node 0 > sd 6:2:0:0: Attached scsi generic sg2 type 0 > scsi_scan_6 used(XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary > Pending Fault > greatest stack (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device > [05:08.0] fault addr 2cfa6e000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > depth: 4088 byte(XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = > 5:8.0 gmfn = 2cfa6e > s left > (XEN) root_entry = ffff83013ff37000 > sd 6:2:0:0: [sdb(XEN) root_entry[5] = 13cf13001 > ] 211550208 512-(XEN) context = ffff83013cf13000 > byte logical blo(XEN) context[40] = 0_0 > cks: (108 GB/100(XEN) ctxt_entry[40] not present > GiB) > sd 6:2:0:0: [sdb] Write Protect is off > sd 6:2:0:0: [sdb] Mode Sense: 1f 00 00 08 > sd 6:2:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't > support DPO or FUA > sdb: unknown partition table > alloc kstat_irqs on node 0 > sd 6:2:0:0: [sdb] Attached SCSI disk > 0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:b8:de:18 > 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection > 0000:07:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101ff-0ff > e1000e 0000:08:00.0: Disabling L1 ASPM > xen: registering gsi 17 triggering 0 polarity 1 > xen_allocate_pirq: returning irq 17 for gsi 17 > xen: --> irq=17 > Already setup the GSI :17 > e1000e 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > e1000e 0000:08:00.0: setting latency timer to 64 > alloc irq_desc for 4257 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4256 on node 0 > alloc kstat_irqs on node 0 > alloc irq_desc for 4255 on node 0 > alloc kstat_irqs on node 0 > scsi_id used greatest stack depth: 3904 bytes left > 0000:08:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:b8:de:19 > 0000:08:00.0: eth1: Intel(R) PRO/1000 Network Connection > 0000:08:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff > initcall e1000_init_module+0x0/0x70 [e1000e] returned 0 after 392599 > usecs > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > addr 2cede1000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2cede1 > (XEN) root_entry = ffff83013ff37000 > (XEN) root_entry[5] = 13cf13001 > (XEN) context = ffff83013cf13000 > (XEN) context[40] = 0_0 > (XEN) ctxt_entry[40] not present > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > addr 2cede3000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2cede3 > (XEN) root_entry = ffff83013ff37000 > (XEN) root_entry[5] = 13cf13001 > (XEN) context = ffff83013cf13000 > (XEN) context[40] = 0_0 > (XEN) ctxt_entry[40] not present > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > addr 2cede2000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2cede2 > (XEN) root_entry = ffff83013ff37000 > (XEN) root_entry[5] = 13cf13001 > (XEN) context = ffff83013cf13000 > (XEN) context[40] = 0_0 > (XEN) ctxt_entry[40] not present > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > addr 2cfff9000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2cfff9 > (XEN) root_entry = ffff83013ff37000 > (XEN) root_entry[5] = 13cf13001 > (XEN) context = ffff83013cf13000 > (XEN) context[40] = 0_0 > (XEN) ctxt_entry[40] not present > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > addr 2ced30000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2ced30 > (XEN) root_entry = ffff83013ff37000 > (XEN) root_entry[5] = 13cf13001 > (XEN) context = ffff83013cf13000 > (XEN) context[40] = 0_0 > (XEN) ctxt_entry[40] not present > calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 1132 > initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 3 > usecs > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > addr 2cf14b000, iommu reg = ffff82c3fff57000 > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > (XEN) print_vtd_entries: iommu = ffff83013ff7b130 bdf = 5:8.0 gmfn = > 2cf14b > (XEN) root_entry = ffff83013ff37000 > (XEN) root_entry[5] = 13cf13001 > (XEN) context = ffff83013cf13000 > (XEN) context[40] = 0_0 > (XEN) ctxt_entry[40] not present > > > On Sat, 2010-05-29 at 18:20 +0300, Pasi Kärkkäinen wrote: > > On Sat, May 29, 2010 at 07:31:17AM -0700, M. Nunberg wrote: > > > I've been trying to get VT-D working wiht xen for quite some time, since > > > 3.4.2, and I've always had issues with my RAID controller not working > > > properly when iommu is not disabled in Xen: > > > > > > lspci outpuut for the card: > > > > <snip> > > > > > > > > I am using a Supermicro X8DALi motherboard with a 5500 chipset. > > > > > > Whenever I try to access the device the Xen console spits out something > > > like this: > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > > > > reads are partially succcessful, but I am getting seek errors at times, > > > filesystems will mount properly but I cannot use any of them properly.. > > > > > > > > > The actual kernel output varies, sometimes i get EINVAL when I try to > > > read from the filesystem, sometimes it simply refuses to at all > > > recognize the disk altogether, and other times it will hang the entire > > > system, including the hypervisor itself. > > > I've tried booting the hypervisor with x2apic disabled, but to no > > > effect. I've also tried with the latest xen-4.0-testing (4.0.1), buut > > > same issue and same outpuut > > > > > > A quick google turns up a thread, from this mailing list, with a > > > different RAID card, but the kernel output is similar.. e.g. > > > > > > scsi scan: INQUIRY result too short (5), using 36 > > > > > > http://lists.xensource.com/archives/html/xen-users/2010-04/msg00535.html > > > > > > The full xen log is below > > > > > > > > > > Did you use the latest pvops dom0 kernel from xen/stable-2.6.32.x branch? > > Could you also post the full serial log _with_ the dom0 kernel messages? > > > > .. since the problem gets triggered by the dom0 kernel.. > > > > -- Pasi > > > > > > > > > > > > > > > > > > > L __ __ _ _ ___ > > > ___ > > > \ \/ /___ _ __ | || | / _ \ / _ \ 0x146000>, shtab=0x3a2078, > > > entry=0x100000 > > > \ // _ \ '_ \ | || |_| | | | | | > > > | > > > / \ __/ | | | |__ _| |_| | |_| |apper/OS-root ro nomodeset > > > console=tty0 r > > > /_/\_\___|_| |_| | > > > _|(_)___(_)___/ > > > 020 > > > bytes] > > > (XEN) Xen version 4.0.0 (mordy@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) > > > Fri May 21 07:50:16 PDT 2010boot-module > > > @ > > > (XEN) Latest ChangeSet: > > > unavailable > > > (XEN) Console output is > > > synchronous. > > > (XEN) Command line: iommu=verbose loglvl=all guest_loglvl=all > > > sync_console console_to_rint com1=115200,8n1 > > > console=com1 > > > (XEN) Video > > > information: > > > (XEN) VGA is text mode 80x25, font > > > 8x16 > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 > > > seconds > > > (XEN) EDID info not retrieved because no DDC retrieval method > > > detected > > > (XEN) Disc information: > > > (XEN) Found 1 MBR signatures > > > (XEN) Found 1 EDD information structures > > > (XEN) Xen-e820 RAM map: > > > (XEN) 0000000000000000 - 000000000009a000 (usable) > > > (XEN) 000000000009a000 - 00000000000a0000 (reserved) > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > > (XEN) 0000000000100000 - 00000000bf760000 (usable) > > > (XEN) 00000000bf76e000 - 00000000bf770000 type 9 > > > (XEN) 00000000bf770000 - 00000000bf77e000 (ACPI data) > > > (XEN) 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS) > > > (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) > > > (XEN) 00000000bf7ec000 - 00000000c0000000 (reserved) > > > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > > (XEN) 0000000100000000 - 0000000340000000 (usable) > > > (XEN) ACPI: RSDP 000F9E10, 0024 (r2 ACPIAM) > > > (XEN) ACPI: XSDT BF770100, 0094 (r1 NEC 20090424 MSFT > > > 97) > > > (XEN) ACPI: FACP BF770290, 00F4 (r4 042409 FACP1917 20090424 MSFT > > > 97) > > > (XEN) ACPI: DSDT BF770670, 5BFB (r2 10601 10601000 0 INTL > > > 20051117) > > > (XEN) ACPI: FACS BF77E000, 0040 > > > (XEN) ACPI: APIC BF770390, 00D2 (r2 042409 APIC1917 20090424 MSFT > > > 97) > > > (XEN) ACPI: MCFG BF770470, 003C (r1 042409 OEMMCFG 20090424 MSFT > > > 97) > > > (XEN) ACPI: SLIC BF7704B0, 0176 (r1 NEC 20090424 MSFT > > > 97) > > > (XEN) ACPI: ERST BF770630, 0040 (r1 042409 WHEA1917 20090424 MSFT > > > 97) > > > (XEN) ACPI: OEMB BF77E040, 007B (r1 042409 OEMB1917 20090424 MSFT > > > 97) > > > (XEN) ACPI: SRAT BF77A670, 01D0 (r1 042409 OEMSRAT 1 INTL > > > 1) > > > (XEN) ACPI: HPET BF77A840, 0038 (r1 042409 OEMHPET 20090424 MSFT > > > 97) > > > (XEN) ACPI: DMAR BF77E0C0, 0118 (r1 AMI OEMDMAR 1 MSFT > > > 97) > > > (XEN) ACPI: SSDT BF781DF0, 0363 (r1 DpgPmm CpuPm 12 INTL > > > 20051117) > > > (XEN) ACPI: EINJ BF77A880, 0130 (r1 AMIER AMI_EINJ 20090424 MSFT > > > 97) > > > (XEN) ACPI: BERT BF77AA10, 0030 (r1 AMIER AMI_BERT 20090424 MSFT > > > 97) > > > (XEN) ACPI: ERST BF77AA40, 01B0 (r1 AMIER AMI_ERST 20090424 MSFT > > > 97) > > > (XEN) ACPI: HEST BF77ABF0, 00A8 (r1 AMIER AMI_HEST 20090424 MSFT > > > 97) > > > (XEN) System RAM: 12045MB (12334808kB) > > > (XEN) SRAT: PXM 0 -> APIC 0 -> Node 0 > > > (XEN) SRAT: PXM 0 -> APIC 2 -> Node 0 > > > (XEN) SRAT: PXM 0 -> APIC 4 -> Node 0 > > > (XEN) SRAT: PXM 0 -> APIC 6 -> Node 0 > > > (XEN) SRAT: PXM 0 -> APIC 1 -> Node 0 > > > (XEN) SRAT: PXM 0 -> APIC 3 -> Node 0 > > > (XEN) SRAT: PXM 0 -> APIC 5 -> Node 0 > > > (XEN) SRAT: PXM 0 -> APIC 7 -> Node 0 > > > (XEN) SRAT: PXM 1 -> APIC 16 -> Node 1 > > > (XEN) SRAT: PXM 1 -> APIC 18 -> Node 1 > > > (XEN) SRAT: PXM 1 -> APIC 20 -> Node 1 > > > (XEN) SRAT: PXM 1 -> APIC 22 -> Node 1 > > > (XEN) SRAT: PXM 1 -> APIC 17 -> Node 1 > > > (XEN) SRAT: PXM 1 -> APIC 19 -> Node 1 > > > (XEN) SRAT: PXM 1 -> APIC 21 -> Node 1 > > > (XEN) SRAT: PXM 1 -> APIC 23 -> Node 1 > > > (XEN) SRAT: Node 0 PXM 0 0-a0000 > > > (XEN) SRAT: Node 0 PXM 0 100000-c0000000 > > > (XEN) SRAT: Node 0 PXM 0 100000000-1c0000000 > > > (XEN) SRAT: Node 1 PXM 1 1c0000000-340000000 > > > (XEN) NUMA: Allocated memnodemap from 33fdfb000 - 33fdff000 > > > (XEN) NUMA: Using 8 for the hash shift. > > > (XEN) Domain heap initialised DMA width 30 bits > > > (XEN) found SMP MP-table at 000ff780 > > > (XEN) DMI present. > > > (XEN) Using APIC driver default > > > (XEN) ACPI: PM-Timer IO Port: 0x808 > > > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > > > (XEN) ACPI: wakeup_vec[bf77e00c], vec_size[20] > > > (XEN) ACPI: Local APIC address 0xfee00000 > > > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > > > (XEN) Processor #0 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled) > > > (XEN) Processor #16 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > > > (XEN) Processor #2 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > > (XEN) Processor #18 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > > > (XEN) Processor #4 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) > > > (XEN) Processor #20 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) > > > (XEN) Processor #6 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) > > > (XEN) Processor #22 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) > > > (XEN) Processor #1 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled) > > > (XEN) Processor #17 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled) > > > (XEN) Processor #3 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x13] enabled) > > > (XEN) Processor #19 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled) > > > (XEN) Processor #5 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled) > > > (XEN) Processor #21 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled) > > > (XEN) Processor #7 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled) > > > (XEN) Processor #23 7:10 APIC version 21 > > > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > > > (XEN) Overriding APIC driver with bigsmp > > > (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > > > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) > > > (XEN) ACPI: IRQ0 used by override. > > > (XEN) ACPI: IRQ2 used by override. > > > (XEN) ACPI: IRQ9 used by override. > > > (XEN) Enabling APIC mode: Phys. Using 1 I/O APICs > > > (XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000 > > > (XEN) [VT-D]dmar.c:679: Host address width 40 > > > (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD: > > > (XEN) [VT-D]dmar.c:398: dmaru->address = fbffe000 > > > (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7 > > > (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL > > > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7 > > > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000 end_address effff > > > (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.7 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2 > > > (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.7 > > > (XEN) [VT-D]dmar.c:571: RMRR region: base_addr bf7ec000 end_address > > > bf7fffff > > > (XEN) [VT-D]dmar.c:704: found ACPI_DMAR_ATSR: > > > (XEN) [VT-D]dmar.c:599: atsru->all_ports: 0 > > > (XEN) [VT-D]dmar.c:320: bridge: 0:1.0 start = 0 sec = 1 sub = 1 > > > (XEN) [VT-D]dmar.c:320: bridge: 0:3.0 start = 0 sec = 2 sub = 2 > > > (XEN) [VT-D]dmar.c:320: bridge: 0:7.0 start = 0 sec = 3 sub = 3 > > > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > > > (XEN) PCI: Not using MMCONFIG. > > > (XEN) Using ACPI (MADT) for SMP configuration information > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > (XEN) Detected 2266.790 MHz processor. > > > (XEN) Initing memory sharing. > > > (XEN) VMX: Supported advanced features: > > > (XEN) - APIC MMIO access virtualisation > > > (XEN) - APIC TPR shadow > > > (XEN) - Extended Page Tables (EPT) > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > (XEN) - Virtual NMI > > > (XEN) - MSR direct-access bitmap > > > (XEN) HVM: ASIDs enabled. > > > (XEN) HVM: VMX enabled > > > (XEN) HVM: Hardware Assisted Paging detected. > > > (XEN) Intel machine check reporting enabled > > > (XEN) [VT-D]iommu.c:1078: drhd->address = fbffe000 iommu->reg = > > > ffff82c3fff57000 > > > (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f0207e > > > (XEN) Intel VT-d Snoop Control not supported. > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > (XEN) Intel VT-d Queued Invalidation supported. > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > (XEN) I/O virtualisation enabled > > > (XEN) I/O virtualisation for PV guests disabled > > > (XEN) Total of 16 processors activated. > > > (XEN) ENABLING IO-APIC IRQs > > > (XEN) -> Using new ACK method > > > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > > > (XEN) TSC is reliable, synchronization unnecessary > > > (XEN) Platform timer is 14.318MHz HPET > > > ?(XEN) Allocated console ring of 128 KiB. > > > (XEN) microcode.c:73:d32767 microcode: CPU1 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU9 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU14 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU6 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU3 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU11 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU8 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU7 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU15 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU2 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU5 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU13 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU4 resumed > > > (XEN) microcode.c:73:d32767 microcode: CPU10 resumed > > > (XEN) Brought up 16 CPUs > > > (XEN) microcode.c:73:d32767 microcode: CPU12 resumed > > > (XEN) Turbo Mode detected! > > > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is > > > enabled. > > > (XEN) ACPI sleep modes: S3 > > > (XEN) mcheck_poll: Machine check polling timer started. > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:0.0 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.0 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.1 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.2 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.3 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.4 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.5 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.6 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:16.7 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 1:0.0 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 3:0.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 5:e.0 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 7:0.0 > > > (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 8:0.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:0.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.4 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:2.5 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:3.4 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:4.3 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:5.3 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = fe:6.3 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:0.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.4 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:2.5 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:3.4 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:4.3 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:5.3 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.0 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.1 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.2 > > > (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = ff:6.3 > > > (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg = > > > ffff82c3fff57000 > > > (XEN) *** LOADING DOMAIN 0 *** > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x26b6000 > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > (XEN) Dom0 alloc.: 0000000100000000->0000000120000000 (2937045 pages > > > to be allocated) > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826b6000 > > > (XEN) Init. ramdisk: ffffffff826b6000->ffffffff8f7d7600 > > > (XEN) Phys-Mach map: ffffffff8f7d8000->ffffffff90f406a8 > > > (XEN) Start info: ffffffff90f41000->ffffffff90f414b4 > > > (XEN) Page tables: ffffffff90f42000->ffffffff90fcf000 > > > (XEN) Boot stack: ffffffff90fcf000->ffffffff90fd0000 > > > (XEN) TOTAL: ffffffff80000000->ffffffff91400000 > > > (XEN) ENTRY ADDRESS: ffffffff819be200 > > > (XEN) Dom0 has maximum 16 VCPUs > > > (XEN) Scrubbing Free RAM: .done. > > > (XEN) Xen trace buffers: disabled > > > (XEN) Std. Loglevel: All > > > (XEN) Guest Loglevel: All > > > (XEN) ********************************************** > > > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > > > (XEN) ******* This option is intended to aid debugging of Xen by > > > ensuring > > > (XEN) ******* that all output is synchronously delivered on the serial > > > line. > > > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > > > (XEN) ******* timekeeping. It is NOT recommended for production use! > > > (XEN) ********************************************** > > > (XEN) 3... 2... 1... > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > > > input to Xen) > > > (XEN) Freed 164kB init memory. > > > mapping kernel into physical memory > > > Xen: setup ISA identity maps > > > about to get started... > > > (XEN) PCI add device 00:00.0 > > > (XEN) PCI add device 00:01.0 > > > (XEN) PCI add device 00:03.0 > > > (XEN) PCI add device 00:07.0 > > > (XEN) PCI add device 00:14.0 > > > (XEN) PCI add device 00:14.1 > > > (XEN) PCI add device 00:14.2 > > > (XEN) PCI add device 00:14.3 > > > (XEN) PCI add device 00:16.0 > > > (XEN) PCI add device 00:16.1 > > > (XEN) PCI add device 00:16.2 > > > (XEN) PCI add device 00:16.3 > > > (XEN) PCI add device 00:16.4 > > > (XEN) PCI add device 00:16.5 > > > (XEN) PCI add device 00:16.6 > > > (XEN) PCI add device 00:16.7 > > > (XEN) PCI add device 00:1a.0 > > > (XEN) PCI add device 00:1a.1 > > > (XEN) PCI add device 00:1a.2 > > > (XEN) PCI add device 00:1a.7 > > > (XEN) PCI add device 00:1b.0 > > > (XEN) PCI add device 00:1c.0 > > > (XEN) PCI add device 00:1c.4 > > > (XEN) PCI add device 00:1c.5 > > > (XEN) PCI add device 00:1d.0 > > > (XEN) PCI add device 00:1d.1 > > > (XEN) PCI add device 00:1d.2 > > > (XEN) PCI add device 00:1d.7 > > > (XEN) PCI add device 00:1e.0 > > > (XEN) PCI add device 00:1f.0 > > > (XEN) PCI add device 00:1f.2 > > > (XEN) PCI add device 00:1f.3 > > > (XEN) PCI add device 01:00.0 > > > (XEN) PCI add device 03:00.0 > > > (XEN) PCI add device 04:00.0 > > > (XEN) PCI add device 04:00.2 > > > (XEN) PCI add device 05:0e.0 > > > (XEN) PCI add device 07:00.0 > > > (XEN) PCI add device 08:00.0 > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-1 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=1120] > > > (XEN) Monitor-Mwait will be used to enter C-3 state > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'. > > > (XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 203a09000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 203a09 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 203eba000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 203eba > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204e11000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204e11 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2061e2000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2061e2 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205043000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205043 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 20552b000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 20552b > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205708000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205708 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2060c0000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2060c0 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 206591000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 206591 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204353000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204353 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2061f2000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2061f2 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204306000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204306 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205f6b000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205f6b > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205665000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205665 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2045a0000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2045a0 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205669000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205669 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2042c6000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2042c6 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2061fe000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2061fe > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 20560a000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 20560a > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 206003000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 206003 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 20583e000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 20583e > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205615000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205615 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204265000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204265 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 207498000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 207498 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2049d1000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2049d1 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 20488e000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 20488e > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205495000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205495 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2072d8000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2072d8 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2055ae000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2055ae > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 205544000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 205544 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 204865000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 204865 > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Primary Pending Fault > > > (XEN) [VT-D]iommu.c:796: DMAR:[DMA Write] Request device [05:08.0] fault > > > addr 2074be000, iommu reg = ffff82c3fff57000 > > > (XEN) DMAR:[fault reason 02h] Present bit in context entry is clear > > > (XEN) print_vtd_entries: iommu = ffff83013fffaee0 bdf = 5:8.0 gmfn = > > > 2074be > > > (XEN) root_entry = ffff83013ff37000 > > > (XEN) root_entry[5] = 13cf12001 > > > (XEN) context = ffff83013cf12000 > > > (XEN) context[40] = 0_0 > > > (XEN) ctxt_entry[40] not present > > > > > > > > > _______________________________________________ > > > Xen-devel mailing list > > > Xen-devel@xxxxxxxxxxxxxxxxxxx > > > http://lists.xensource.com/xen-devel > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |