[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: Failure to start xend with 2.6.32.15 (c2cb3df04eb3ff68d0de102b2acacc9b8616e659) under Xen 4.0 (F13)
Hi Boris et al,I can confirm this problem. Same setup ( KV 2.6.32.15, Ubuntu 10.04 server). evtchn is built-in, not a module. I manually tried to create the device node (mknod /dev/xen/evtchn c 10 62) but xenstored didn't like that and after the failed start of xenstored /dev/xen/evtchn disappeard again. Is there a quick fix or should I downgrade? cheers Paul ------ info ---------- root@two-new /usr/src # ls -l /dev/xen/ total 0 crw-rw---- 1 root root 10, 55 2010-06-08 21:21 gntdev root@two-new /usr/src # cat /proc/misc 55 xen/gntdev 56 network_throughput 57 network_latency 58 cpu_dma_latency 59 device-mapper 1 psaux 200 tun 60 pktcdvd 228 hpet 61 blktap-control 62 xen/evtchn 229 fuse 227 mcelog 63 vga_arbiter ------ info ---------- Am 08.06.2010 22:02, schrieb Boris Derzhavets: Reproduced on top of F13 Xen 4.0 Dom0 [root@fedora13 ~]# cd /dev/xen [root@fedora13 xen]# ls -l total 0 crw-rw---- 1 root root 10, 61 Jun 8 23:56 gntdev [root@fedora13 xen]# udevd -V 151 [root@fedora13 xen]# cat /proc/misc 229 fuse 223 uinput 130 watchdog 184 microcode 56 network_throughput 57 network_latency 58 cpu_dma_latency 59 device-mapper 144 nvram 228 hpet 60 blktap-control 61 xen/gntdev 62 xen/evtchn 231 snapshot 227 mcelog 63 vga_arbiter Boris. --- On Tue, 6/8/10, Jeremy Fitzhardinge<jeremy@xxxxxxxx> wrote: From: Jeremy Fitzhardinge<jeremy@xxxxxxxx> Subject: Re: [Xen-devel] Re: Failure to start xend with 2.6.32.15 (c2cb3df04eb3ff68d0de102b2acacc9b8616e659) under Xen 4.0 To: "Boris Derzhavets"<bderzhavets@xxxxxxxxx> Cc: "Bastian Blank"<waldi@xxxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx, "Keir Fraser"<keir.fraser@xxxxxxxxxxxxx>, "Konrad Rzeszutek Wilk"<konrad.wilk@xxxxxxxxxx> Date: Tuesday, June 8, 2010, 3:15 PM On 06/08/2010 12:13 PM, Boris Derzhavets wrote:Yes it's the kernel, but no device created under /dev/xen (in case 2.6.32.15 been loaded ) :- root@ServerLLX:~# cd /dev/xen root@ServerLLX:/dev/xen# ls -l total 0 crw-rw---- 1 root root 10, 61 2010-06-08 23:08 gntdevWhat distro? Perhaps there's something wrong with the udev setup? Jroot@ServerLLX:/dev/xen# cat /proc/misc 56 network_throughput 57 network_latency 58 cpu_dma_latency 59 device-mapper 144 nvram 228 hpet 60 blktap-control => 61 xen/gntdev =>62 xen/evtchn 231 snapshot 227 mcelog 63 vga_arbiter Boris --- On *Tue, 6/8/10, Jeremy Fitzhardinge /<jeremy@xxxxxxxx>/* wrote: From: Jeremy Fitzhardinge<jeremy@xxxxxxxx> Subject: Re: [Xen-devel] Re: Failure to start xend with 2.6.32.15 (c2cb3df04eb3ff68d0de102b2acacc9b8616e659) under Xen 4.0 To: "Boris Derzhavets"<bderzhavets@xxxxxxxxx> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx, "Keir Fraser" <keir.fraser@xxxxxxxxxxxxx>, "Konrad Rzeszutek Wilk" <konrad.wilk@xxxxxxxxxx> Date: Tuesday, June 8, 2010, 2:50 PM On 06/08/2010 11:29 AM, Boris Derzhavets wrote: > root@ServerLLX:/# find / -name "libxc" -print > ./usr/src/xen-4.0.0/tools/libxc > > root@ServerLLX:/# cd /dev/xen > root@ServerLLX:/dev/xen# ls -l > total 0 > crw-rw---- 1 root root 10, 61 2010-06-08 22:10 gntdev > root@ServerLLX:/dev/xen# > > Seems like i have evtchn device missing, regardless in .config :- > You should be able to see if its present in the kernel by looking at /proc/misc, but something still needs to create the /dev nodes. Usually this is udev, but libxc goes to special lengths to get this wrong, and will end up deleting the perfectly good nodes unless you update it. Keir, have the libxc changes been backported to all the release trees? J > > CONFIG_XEN_BALLOON=y > CONFIG_XEN_SCRUB_PAGES=y > => CONFIG_XEN_DEV_EVTCHN=y > CONFIG_XEN_BACKEND=y > CONFIG_XEN_NETDEV_BACKEND=y > CONFIG_XEN_BLKDEV_BACKEND=y > CONFIG_XEN_BLKDEV_TAP=y > CONFIG_XEN_BLKBACK_PAGEMAP=y > CONFIG_XEN_PCIDEV_BACKEND=y > CONFIG_XEN_PCIDEV_BACKEND_VPCI=y > > > Boris. > > > --- On *Tue, 6/8/10, Jeremy Fitzhardinge /<jeremy@xxxxxxxx </mc/compose?to=jeremy@xxxxxxxx>>/* wrote: > > > From: Jeremy Fitzhardinge<jeremy@xxxxxxxx </mc/compose?to=jeremy@xxxxxxxx>> > Subject: [Xen-devel] Re: Failure to start xend with 2.6.32.15 > (c2cb3df04eb3ff68d0de102b2acacc9b8616e659) under Xen 4.0 > To: "Boris Derzhavets"<bderzhavets@xxxxxxxxx </mc/compose?to=bderzhavets@xxxxxxxxx>> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx </mc/compose?to=xen-devel@xxxxxxxxxxxxxxxxxxx>, "Konrad Rzeszutek Wilk" > <konrad.wilk@xxxxxxxxxx</mc/compose?to=konrad.wilk@xxxxxxxxxx>> > Date: Tuesday, June 8, 2010, 1:29 PM > > On 06/08/2010 12:57 AM, Boris Derzhavets wrote: > > [2010-06-08 11:50:10 4166] ERROR (SrvDaemon:349) Exception starting > > xend ((111, 'Connection refused')) > > Traceback (most recent call last): > > > > Is your libxc uptodate? Do you have proper gnttab and evtchn > entries in > /dev/xen? > > J > > > File > > > "/usr/local/lib/python2.6/dist-packages/xen/xend/server/SrvDaemon.py", > > line 341, in run > > servers = SrvServer.create() > > File > > > "/usr/local/lib/python2.6/dist-packages/xen/xend/server/SrvServer.py", > > line 251, in create > > root.putChild('xend', SrvRoot()) > > File > > "/usr/local/lib/python2.6/dist-packages/xen/xend/server/SrvRoot.py", > > line 40, in __init__ > > self.get(name) > > File "/usr/local/lib/python2.6/dist-packages/xen/web/SrvDir.py", > > line 84, in get > > val = val.getobj() > > File "/usr/local/lib/python2.6/dist-packages/xen/web/SrvDir.py", > > line 52, in getobj > > self.obj = klassobj() > > File > > "/usr/local/lib/python2.6/dist-packages/xen/xend/server/SrvNode.py", > > line 30, in __init__ > > self.xn = XendNode.instance() > > File > "/usr/local/lib/python2.6/dist-packages/xen/xend/XendNode.py", > > line 1141, in instance > > inst.save() > > File > "/usr/local/lib/python2.6/dist-packages/xen/xend/XendNode.py", > > line 578, in save > > self.save_networks() > > File > "/usr/local/lib/python2.6/dist-packages/xen/xend/XendNode.py", > > line 594, in save_networks > > for network_uuid in XendNetwork.get_all()]) > > File > "/usr/local/lib/python2.6/dist-packages/xen/xend/XendBase.py", > > line 102, in get_record > > for key in keys]) > > File > > > "/usr/local/lib/python2.6/dist-packages/xen/xend/XendNetwork.py", line > > 196, in get_VIFs > > vms = XendDomain.instance().get_all_vms() > > File > > "/usr/local/lib/python2.6/dist-packages/xen/xend/XendDomain.py", > line > > 1882, in instance > > inst.init() > > File > > "/usr/local/lib/python2.6/dist-packages/xen/xend/XendDomain.py", > line > > 114, in init > > xstransact.Mkdir(XS_VMROOT) > > File > > > "/usr/local/lib/python2.6/dist-packages/xen/xend/xenstore/xstransact.py", > > line 355, in Mkdir > > complete(path, lambda t: t.mkdir(*args)) > > File > > > "/usr/local/lib/python2.6/dist-packages/xen/xend/xenstore/xstransact.py", > > line 361, in complete > > t = xstransact(path) > > File > > > "/usr/local/lib/python2.6/dist-packages/xen/xend/xenstore/xstransact.py", > > line 29, in __init__ > > self.transaction = xshandle().transaction_start() > > File > > > "/usr/local/lib/python2.6/dist-packages/xen/xend/xenstore/xsutil.py", > > line 18, in xshandle > > xs_handle = xen.lowlevel.xs.xs() > > > > Boris. > > P.S. 2.6.32.10 works fine. > > > > > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxx </mc/compose?to=Xen-devel@xxxxxxxxxxxxxxxxxxx> > </mc/compose?to=Xen-devel@xxxxxxxxxxxxxxxxxxx </mc/compose?to=Xen-devel@xxxxxxxxxxxxxxxxxxx>> > http://lists.xensource.com/xen-devel > > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx </mc/compose?to=Xen-devel@xxxxxxxxxxxxxxxxxxx> http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |