Xen project Mailing List

Re: [Xen-devel] [GIT PULL] devel/pat + devel/kms.fixes-0.5 on RV730 PRO [Radeon HD 4650]

To: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>

From: Boris Derzhavets <bderzhavets@xxxxxxxxx>

Date: Mon, 16 Aug 2010 11:35:24 -0700 (PDT)

Delivery-date: Mon, 16 Aug 2010 11:36:22 -0700

Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:Cc:MIME-Version:Content-Type; b=mJXKFL0qp4QdNn4Y59m/0Tt7ckkx9+Jivmqrg6q81IgrqGBI7hcx93YawxblRrNVCBjY5wt6orMPWYDnJyszjJzJXJutSLbDZ0O/lhGTVCtb3nXZc1qjj7RVEOcuwfdnyxHzUB+2BPxondb+YnErM3WgQhFAjs1+sYrzucJCCZQ=;

List-id: Xen developer discussion <xen-devel.lists.xensource.com>

> Can you provide the serial output?
No

> Is the error the same as you reported
before (were it could not load the firmware code?)

Yes.
Xen System loads up so i have dmesg.log It's attached

> Can you try fiddling with the dracut options to force it include the
proper firmware bits?

Which ones ? That is what happens loading Dom0.

Dmesg:

[drm] Loading RV730 CP Microcode
platform radeon_cp.0: firmware: requesting radeon/RV730_pfp.bin

Hangs.... for a while.

r600_cp: Failed to load firmware "radeon/RV730_pfp.bin"
[drm:rv770_init] *ERROR* Failed to load firmware!
[drm:radeon_driver_load_kms] *ERROR* Fatal error while trying to initialize radeon.
radeon 0000:01:00.0: PCI INT A disabled
radeon: probe of 0000:01:00.0 failed with error -2

Proceed with normal load.

Boris.

--- On Mon, 8/16/10, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote:

From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Subject: Re: [Xen-devel] [GIT PULL] devel/pat + devel/kms.fixes-0.5 on RV730 PRO [Radeon HD 4650]
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Monday, August 16, 2010, 1:39 PM

On Mon, Aug 16, 2010 at 10:22:35AM -0700, Boris Derzhavets wrote:
> It hanged during loading Dom0 for 1-1.5 min trying to load module and went ahead.
> Dmesg reports error to initialize KMS.

Can you provide the serial output? Is the error the same as you reported
before (were it could not load the firmware code?)

Can you try fiddling with the dracut options to force it include the
proper firmware bits?

>
> Boris.
>
> --- On Mon, 8/16/10, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote:
>
> From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> Subject: Re: [Xen-devel] [GIT PULL] devel/pat + devel/kms.fixes-0.5 on RV730 PRO [Radeon HD 4650]
> To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
> Date: Monday, August 16, 2010, 1:07 PM
>
> On Mon, Aug 16, 2010 at 10:01:53AM -0700, Boris Derzhavets wrote:
> > I did run dracut and created
> > # dracut -f /boot/initramfs-2.6.32.19.img 2.6.32.19
> >
> > -rw-r--r-- 1 root root 79503576 Aug 16 16:25 initramfs-2.6.32.19.img
> >
> > significantly longer (x2) then after automatically created after
> > # make modules_install install
> > reported errors missing radeon modules.
>
> OK, so if you rebuild your kernel and make CONFIG_DRM_RADEON=m and
> re-run dracut does it work?
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
>
>

> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

Attachment: dm1.log.gz
Description: GNU Zip compressed data

_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel