Re: [Xen-devel] Remus : VM on backup not in pause state

[Brendan Cully <brendan@xxxxxxxxx>]

I've reproduced this on unstable (I'd been running the 4.0 tree
previously). The cause was a well-intentioned but broken patch by Ian
Jackson (21488:dd6bbdc42033). I've just mailed the fix to xen-devel.

On Monday, 26 July 2010 at 23:17, Dulloor wrote:
> Thanks for the pointers. I haven't had time to work on this. I will
> collect more data and get back as soon as I can.
> 
> -dulloor
> 
> On Mon, Jul 26, 2010 at 3:05 PM, Brendan Cully <brendan@xxxxxxxxx> wrote:
> > On Thursday, 22 July 2010 at 16:40, Dulloor wrote:
> >> On Thu, Jul 22, 2010 at 2:49 PM, Brendan Cully <brendan@xxxxxxxxx> wrote:
> >> > On Thursday, 22 July 2010 at 13:45, Dulloor wrote:
> >> >> My setup is as follows :
> >> >> - xen : unstable (rev:21743)
> >> >> - Dom0 : pvops (branch : stable-2.6.32.x,
> >> >> rev:01d9fbca207ec232c758d991d66466fc6e38349e)
> >> >> - Guest Configuration :
> >> >> ------------------------------------------------------------------------------------------
> >> >> kernel = "/usr/lib/xen/boot/hvmloader"
> >> >> builder='hvm'
> >> >> name = "linux-hvm"
> >> >> vcpus = 4
> >> >> memory = 2048
> >> >> vif = [ 'type=ioemu, bridge=eth0, mac=00:1c:3e:17:22:13' ]
> >> >> disk = [ 'phy:/dev/XenVolG/hvm-linux-snap-1.img,hda,w' ]
> >> >> device_model = '/usr/lib/xen/bin/qemu-dm'
> >> >> boot="cd"
> >> >> sdl=0
> >> >> vnc=1
> >> >> vnclisten="0.0.0.0"
> >> >> vncconsole=0
> >> >> vncpasswd=''
> >> >> stdvga=0
> >> >> superpages=1
> >> >> serial='pty'
> >> >> ------------------------------------------------------------------------------------------
> >> >>
> >> >> - Remus command :
> >> >> # remus --no-net linux-hvm <dst-ip>
> >> >>
> >> >> - On primary :
> >> >> # xm list
> >> >> Name                                        ID   Mem VCPUs      State   
> >> >> Time(s)
> >> >> linux-hvm                                    9  2048     4     -b-s--   
> >> >>   10.8
> >> >>
> >> >> - On secondary :
> >> >> # xm list
> >> >> Name                                        ID   Mem VCPUs      State   
> >> >> Time(s)
> >> >> linux-hvm                                   11  2048     4     -b----   
> >> >>    1.9
> >> >>
> >> >>
> >> >> I have to issue "xm pause/unpause" explicitly for the backup VM.
> >> >> Any recent changes ?
> >> >
> >> > This probably means there was a timeout on the replication channel,
> >> > interpreted by the backup as a failure of the primary, which caused it
> >> > to activate itself. You should see evidence of that in the remus
> >> > console logs and xend.log and daemon.log (for the disk side).
> >> >
> >> > Once you've figured out where the timeout happened it'll be easier to
> >> > figure out why.
> >> >
> >> Please find the logs attached. I didn't find anything interesting in
> >> daemon.log.
> >> What does remus log there ? I am not using disk replication, since I
> >> have issues with that .. but that's for another email :)
> >
> > daemon.log is just for disk replication, so if you're not using it you
> > won't see anything.
> >
> >> The only visible error is in xend-secondary.log around xc_restore :
> >> [2010-07-22 16:15:37 2056] DEBUG (balloon:207) Balloon: setting dom0 
> >> target to 5
> >> 765 MiB.
> >> [2010-07-22 16:15:37 2056] DEBUG (XendDomainInfo:1467) Setting memory 
> >> target of
> >> domain Domain-0 (0) to 5765 MiB.
> >> [2010-07-22 16:15:37 2056] DEBUG (XendCheckpoint:290) [xc_restore]: 
> >> /usr/lib/xen
> >> /bin/xc_restore 5 1 5 6 1 1 1 0
> >> [2010-07-22 16:18:42 2056] INFO (XendCheckpoint:408) xc: error: Error
> >> when reading pages (11 = Resource temporarily unavailabl): Internal
> >> error
> >> [2010-07-22 16:18:42 2056] INFO (XendCheckpoint:408) xc: error: error
> >> when buffering batch, finishing (11 = Resource temporarily
> >> unavailabl): Internal error
> >>
> >> If you haven't seen this before, please let me know and I will try
> >> debugging more.
> >
> > I haven't seen that. It looks like read_exact_timed has failed with
> > EAGAIN, which is surprising since it explicitly looks for EAGAIN and
> > loops on it. Can you log len and errno after line 77 in
> > read_exact_timed in tools/libxc/xc_domain_restore.c? ie change
> >
> >       if ( len <= 0 )
> >            return -1;
> >
> > to something like
> >
> >   if ( len <= 0 ) {
> >       fprintf(stderr, "read_exact_timed failed (read rc: %d, errno: %d)\n",
> >       len, errno);
> >       return -1;
> >   }
> >
> > Another possibility is read is returning 0 here (and EAGAIN is just a
> > leftover errno from a previous read), which would indicate that the
> > _sender_ hung up the connection. It's hard to tell exactly what's
> > going on because you seem to have an enormous amount of clock skew
> > between your primary and secondary dom0s and I can't tell whether the
> > logs match up.
> >
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel