[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH RFC V3 12/12] xen: Add a Xen specific ACPI Implementation to target-xen
From: Anthony PERARD <anthony.perard@xxxxxxxxxx> Xen currently uses a different BIOS (hvmloader + rombios) therefore the Qemu acpi_piix4 implementation wouldn't work correctly with Xen. We plan on fixing this properly but at the moment we are just adding a new Xen specific acpi_piix4 implementation. This patch is optional; without it the VM boots but it cannot shutdown properly or go to S3. Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> --- Makefile.target | 1 + hw/xen_acpi_piix4.c | 405 +++++++++++++++++++++++++++++++++++++++++++++++++++ hw/xen_common.h | 3 + hw/xen_machine_fv.c | 6 +- 4 files changed, 410 insertions(+), 5 deletions(-) create mode 100644 hw/xen_acpi_piix4.c diff --git a/Makefile.target b/Makefile.target index ea14393..db7f96b 100644 --- a/Makefile.target +++ b/Makefile.target @@ -189,6 +189,7 @@ obj-$(CONFIG_NO_XEN) += xen-stub.o # xen full virtualized machine obj-$(CONFIG_XEN) += xen_machine_fv.o obj-$(CONFIG_XEN) += xen_platform.o +obj-$(CONFIG_XEN) += xen_acpi_piix4.o # USB layer obj-$(CONFIG_USB_OHCI) += usb-ohci.o diff --git a/hw/xen_acpi_piix4.c b/hw/xen_acpi_piix4.c new file mode 100644 index 0000000..f4792f2 --- /dev/null +++ b/hw/xen_acpi_piix4.c @@ -0,0 +1,405 @@ + /* + * PIIX4 ACPI controller emulation + * + * Winston liwen Wang, winston.l.wang@xxxxxxxxx + * Copyright (c) 2006 , Intel Corporation. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw.h" +#include "pc.h" +#include "pci.h" +#include "sysemu.h" +#include "acpi.h" + +#include "xen_backend.h" +#include "xen_common.h" +#include "qemu-log.h" + +#include <xen/hvm/ioreq.h> +#include <xen/hvm/params.h> + +#define PIIX4ACPI_LOG_ERROR 0 +#define PIIX4ACPI_LOG_INFO 1 +#define PIIX4ACPI_LOG_DEBUG 2 +#define PIIX4ACPI_LOGLEVEL PIIX4ACPI_LOG_INFO +#define PIIX4ACPI_LOG(level, fmt, ...) do { if (level <= PIIX4ACPI_LOGLEVEL) qemu_log(fmt, ## __VA_ARGS__); } while (0) + +/* Sleep state type codes as defined by the \_Sx objects in the DSDT. */ +/* These must be kept in sync with the DSDT (hvmloader/acpi/dsdt.asl) */ +#define SLP_TYP_S4 (6 << 10) +#define SLP_TYP_S3 (5 << 10) +#define SLP_TYP_S5 (7 << 10) + +#define ACPI_DBG_IO_ADDR 0xb044 +#define ACPI_PHP_IO_ADDR 0x10c0 + +#define PHP_EVT_ADD 0x0 +#define PHP_EVT_REMOVE 0x3 + +/* The bit in GPE0_STS/EN to notify the pci hotplug event */ +#define ACPI_PHP_GPE_BIT 3 + +#define DEVFN_TO_PHP_SLOT_REG(devfn) (devfn >> 1) +#define PHP_SLOT_REG_TO_DEVFN(reg, hilo) ((reg << 1) | hilo) + +/* ioport to monitor cpu add/remove status */ +#define PROC_BASE 0xaf00 + +typedef struct PCIAcpiState { + PCIDevice dev; + uint16_t pm1_control; /* pm1a_ECNT_BLK */ + qemu_irq irq; + qemu_irq cmos_s3; +} PCIAcpiState; + +typedef struct GPEState { + /* GPE0 block */ + uint8_t gpe0_sts[ACPI_GPE0_BLK_LEN / 2]; + uint8_t gpe0_en[ACPI_GPE0_BLK_LEN / 2]; + + /* CPU bitmap */ + uint8_t cpus_sts[32]; + + /* SCI IRQ level */ + uint8_t sci_asserted; + +} GPEState; + +static GPEState gpe_state; + +static qemu_irq sci_irq; + +typedef struct AcpiDeviceState AcpiDeviceState; +AcpiDeviceState *acpi_device_table; + +static const VMStateDescription vmstate_acpi = { + .name = "PIIX4 ACPI", + .version_id = 1, + .fields = (VMStateField []) { + VMSTATE_PCI_DEVICE(dev, PCIAcpiState), + VMSTATE_UINT16(pm1_control, PCIAcpiState), + VMSTATE_END_OF_LIST() + } +}; + +static void acpiPm1Control_writeb(void *opaque, uint32_t addr, uint32_t val) +{ + PCIAcpiState *s = opaque; + s->pm1_control = (s->pm1_control & 0xff00) | (val & 0xff); +} + +static uint32_t acpiPm1Control_readb(void *opaque, uint32_t addr) +{ + PCIAcpiState *s = opaque; + /* Mask out the write-only bits */ + return (uint8_t)(s->pm1_control & ~(ACPI_BITMASK_GLOBAL_LOCK_RELEASE|ACPI_BITMASK_SLEEP_ENABLE)); +} + +static void acpi_shutdown(PCIAcpiState *s, uint32_t val) +{ + if (!(val & ACPI_BITMASK_SLEEP_ENABLE)) + return; + + switch (val & ACPI_BITMASK_SLEEP_TYPE) { + case SLP_TYP_S3: + qemu_system_reset(); + qemu_irq_raise(s->cmos_s3); + xc_set_hvm_param(xen_xc, xen_domid, HVM_PARAM_ACPI_S_STATE, 3); + break; + case SLP_TYP_S4: + case SLP_TYP_S5: + qemu_system_shutdown_request(); + break; + default: + break; + } +} + +static void acpiPm1ControlP1_writeb(void *opaque, uint32_t addr, uint32_t val) +{ + PCIAcpiState *s = opaque; + + val <<= 8; + s->pm1_control = ((s->pm1_control & 0xff) | val) & ~ACPI_BITMASK_SLEEP_ENABLE; + + acpi_shutdown(s, val); +} + +static uint32_t acpiPm1ControlP1_readb(void *opaque, uint32_t addr) +{ + PCIAcpiState *s = opaque; + /* Mask out the write-only bits */ + return (uint8_t)((s->pm1_control & ~(ACPI_BITMASK_GLOBAL_LOCK_RELEASE|ACPI_BITMASK_SLEEP_ENABLE)) >> 8); +} + +static void acpiPm1Control_writew(void *opaque, uint32_t addr, uint32_t val) +{ + PCIAcpiState *s = opaque; + + s->pm1_control = val & ~ACPI_BITMASK_SLEEP_ENABLE; + + acpi_shutdown(s, val); +} + +static uint32_t acpiPm1Control_readw(void *opaque, uint32_t addr) +{ + PCIAcpiState *s = opaque; + /* Mask out the write-only bits */ + return (s->pm1_control & ~(ACPI_BITMASK_GLOBAL_LOCK_RELEASE|ACPI_BITMASK_SLEEP_ENABLE)); +} + +static void acpi_map(PCIDevice *pci_dev, int region_num, + uint32_t addr, uint32_t size, int type) +{ + PCIAcpiState *d = (PCIAcpiState *)pci_dev; + + /* Byte access */ + register_ioport_write(addr + 4, 1, 1, acpiPm1Control_writeb, d); + register_ioport_read(addr + 4, 1, 1, acpiPm1Control_readb, d); + register_ioport_write(addr + 4 + 1, 1, 1, acpiPm1ControlP1_writeb, d); + register_ioport_read(addr + 4 +1, 1, 1, acpiPm1ControlP1_readb, d); + + /* Word access */ + register_ioport_write(addr + 4, 2, 2, acpiPm1Control_writew, d); + register_ioport_read(addr + 4, 2, 2, acpiPm1Control_readw, d); +} + +static inline int test_bit(uint8_t *map, int bit) +{ + return ( map[bit / 8] & (1 << (bit % 8)) ); +} + +static inline void set_bit(uint8_t *map, int bit) +{ + map[bit / 8] |= (1 << (bit % 8)); +} + +static inline void clear_bit(uint8_t *map, int bit) +{ + map[bit / 8] &= ~(1 << (bit % 8)); +} + +static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val) +{ + PIIX4ACPI_LOG(PIIX4ACPI_LOG_DEBUG, "ACPI: DBG: 0x%08x\n", val); + PIIX4ACPI_LOG(PIIX4ACPI_LOG_INFO, "ACPI:debug: write addr=0x%x, val=0x%x.\n", addr, val); +} + +/* GPEx_STS occupy 1st half of the block, while GPEx_EN 2nd half */ +static uint32_t gpe_sts_read(void *opaque, uint32_t addr) +{ + GPEState *s = opaque; + + return s->gpe0_sts[addr - ACPI_GPE0_BLK_ADDRESS]; +} + +/* write 1 to clear specific GPE bits */ +static void gpe_sts_write(void *opaque, uint32_t addr, uint32_t val) +{ + GPEState *s = opaque; + int hotplugged = 0; + + PIIX4ACPI_LOG(PIIX4ACPI_LOG_DEBUG, "gpe_sts_write: addr=0x%x, val=0x%x.\n", addr, val); + + hotplugged = test_bit(&s->gpe0_sts[0], ACPI_PHP_GPE_BIT); + s->gpe0_sts[addr - ACPI_GPE0_BLK_ADDRESS] &= ~val; + if ( s->sci_asserted && + hotplugged && + !test_bit(&s->gpe0_sts[0], ACPI_PHP_GPE_BIT)) { + PIIX4ACPI_LOG(PIIX4ACPI_LOG_INFO, "Clear the GPE0_STS bit for ACPI hotplug & deassert the IRQ.\n"); + qemu_irq_lower(sci_irq); + } + +} + +static uint32_t gpe_en_read(void *opaque, uint32_t addr) +{ + GPEState *s = opaque; + + return s->gpe0_en[addr - (ACPI_GPE0_BLK_ADDRESS + ACPI_GPE0_BLK_LEN / 2)]; +} + +/* write 0 to clear en bit */ +static void gpe_en_write(void *opaque, uint32_t addr, uint32_t val) +{ + GPEState *s = opaque; + int reg_count; + + PIIX4ACPI_LOG(PIIX4ACPI_LOG_DEBUG, "gpe_en_write: addr=0x%x, val=0x%x.\n", addr, val); + reg_count = addr - (ACPI_GPE0_BLK_ADDRESS + ACPI_GPE0_BLK_LEN / 2); + s->gpe0_en[reg_count] = val; + /* If disable GPE bit right after generating SCI on it, + * need deassert the intr to avoid redundant intrs + */ + if ( s->sci_asserted && + reg_count == (ACPI_PHP_GPE_BIT / 8) && + !(val & (1 << (ACPI_PHP_GPE_BIT % 8))) ) { + PIIX4ACPI_LOG(PIIX4ACPI_LOG_INFO, "deassert due to disable GPE bit.\n"); + s->sci_asserted = 0; + qemu_irq_lower(sci_irq); + } + +} + +static const VMStateDescription vmstate_gpe = { + .name = "gpe", + .version_id = 2, + .minimum_version_id = 2, + .minimum_version_id_old = 2, + .fields = (VMStateField []) { + VMSTATE_BUFFER(gpe0_sts, GPEState), + VMSTATE_BUFFER(gpe0_en, GPEState), + VMSTATE_UINT8(sci_asserted, GPEState), + VMSTATE_END_OF_LIST() + } +}; + +static uint32_t gpe_cpus_readb(void *opaque, uint32_t addr) +{ + uint32_t val = 0; + GPEState *g = opaque; + + switch (addr) { + case PROC_BASE ... PROC_BASE+31: + val = g->cpus_sts[addr - PROC_BASE]; + default: + break; + } + + return val; +} + +static void gpe_cpus_writeb(void *opaque, uint32_t addr, uint32_t val) +{ + /* GPEState *g = opaque; */ + + switch (addr) { + case PROC_BASE ... PROC_BASE + 31: + /* don't allow to change cpus_sts from inside a guest */ + break; + default: + break; + } +} + +static void gpe_acpi_init(void) +{ + GPEState *s = &gpe_state; + memset(s, 0, sizeof(GPEState)); + + s->cpus_sts[0] = 1; + + register_ioport_read(PROC_BASE, 32, 1, gpe_cpus_readb, s); + register_ioport_write(PROC_BASE, 32, 1, gpe_cpus_writeb, s); + + register_ioport_read(ACPI_GPE0_BLK_ADDRESS, + ACPI_GPE0_BLK_LEN / 2, + 1, + gpe_sts_read, + s); + register_ioport_read(ACPI_GPE0_BLK_ADDRESS + ACPI_GPE0_BLK_LEN / 2, + ACPI_GPE0_BLK_LEN / 2, + 1, + gpe_en_read, + s); + + register_ioport_write(ACPI_GPE0_BLK_ADDRESS, + ACPI_GPE0_BLK_LEN / 2, + 1, + gpe_sts_write, + s); + register_ioport_write(ACPI_GPE0_BLK_ADDRESS + ACPI_GPE0_BLK_LEN / 2, + ACPI_GPE0_BLK_LEN / 2, + 1, + gpe_en_write, + s); + + vmstate_register(NULL, 0, &vmstate_gpe, s); +} + +static int piix4_pm_xen_initfn(PCIDevice *dev) +{ + PCIAcpiState *s = DO_UPCAST(PCIAcpiState, dev, dev); + uint8_t *pci_conf; + + pci_conf = s->dev.config; + pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL); + pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3); + pci_conf[0x08] = 0x01; /* B0 stepping */ + pci_conf[0x09] = 0x00; /* base class */ + pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER); + pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; /* header_type */ + pci_conf[0x3d] = 0x01; /* Hardwired to PIRQA is used */ + + /* PMBA POWER MANAGEMENT BASE ADDRESS, hardcoded to 0x1f40 + * to make shutdown work for IPF, due to IPF Guest Firmware + * will enumerate pci devices. + * + * TODO: if Guest Firmware or Guest OS will change this PMBA, + * More logic will be added. + */ + pci_conf[0x40] = 0x41; /* Special device-specific BAR at 0x40 */ + pci_conf[0x41] = 0x1f; + pci_conf[0x42] = 0x00; + pci_conf[0x43] = 0x00; + + s->pm1_control = ACPI_BITMASK_SCI_ENABLE; + + acpi_map((PCIDevice *)s, 0, 0x1f40, 0x10, PCI_BASE_ADDRESS_SPACE_IO); + + gpe_acpi_init(); + + register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s); + + return 0; +} + +void piix4_pm_xen_init(PCIBus *bus, int devfn, qemu_irq sci_irq_spec, qemu_irq cmos_s3) +{ + PCIDevice *dev; + PCIAcpiState *s; + + sci_irq = sci_irq_spec; + + dev = pci_create(bus, devfn, "PIIX4 ACPI"); + + s = DO_UPCAST(PCIAcpiState, dev, dev); + + s->irq = sci_irq_spec; + s->cmos_s3 = cmos_s3; + + qdev_init_nofail(&dev->qdev); +} + +static PCIDeviceInfo piix4_pm_xen_info = { + .qdev.name = "PIIX4 ACPI", + .qdev.desc = "dm", + .qdev.size = sizeof(PCIAcpiState), + .qdev.vmsd = &vmstate_acpi, + .init = piix4_pm_xen_initfn, +}; + +static void piix4_pm_xen_register(void) +{ + pci_qdev_register(&piix4_pm_xen_info); +} + +device_init(piix4_pm_xen_register); diff --git a/hw/xen_common.h b/hw/xen_common.h index 96cfad7..9dfca8f 100644 --- a/hw/xen_common.h +++ b/hw/xen_common.h @@ -55,4 +55,7 @@ typedef xc_interface *qemu_xc_interface; qemu_irq *i8259_xen_init(void); void destroy_hvm_domain(void); +/* hw/xen_acpi_piix4.c */ +void piix4_pm_xen_init(PCIBus *bus, int devfn, qemu_irq sci_irq_spec, qemu_irq cmos_s3); + #endif /* QEMU_HW_XEN_COMMON_H */ diff --git a/hw/xen_machine_fv.c b/hw/xen_machine_fv.c index dfdff55..30a356f 100644 --- a/hw/xen_machine_fv.c +++ b/hw/xen_machine_fv.c @@ -54,7 +54,6 @@ static void xen_init_fv(ram_addr_t ram_size, qemu_irq *isa_irq; qemu_irq *i8259; qemu_irq *cmos_s3; - qemu_irq *smi_irq; IsaIrqState *isa_irq_state; DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; FDCtrl *floppy_controller; @@ -131,10 +130,7 @@ static void xen_init_fv(ram_addr_t ram_size, if (acpi_enabled) { cmos_s3 = qemu_allocate_irqs(pc_cmos_set_s3_resume, rtc_state, 1); - smi_irq = qemu_allocate_irqs(pc_acpi_smi_interrupt, first_cpu, 1); - piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100, - isa_reserve_irq(9), *cmos_s3, *smi_irq, - 0); + piix4_pm_xen_init(pci_bus, piix3_devfn + 3, isa_reserve_irq(9), *cmos_s3); } if (i440fx_state) { -- 1.6.5 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |