Re: [Xen-devel] Re: VM hung after running sometime

[wei song <james.songwei@xxxxxxxxx>]

I also met this issue, especially running high work load on HVM vms with xen 4.0.0 + pvops 2.6.31.13xen. I noticed port 1 of VCPU1 always be blocked on this port, the system of vcpu0 is normal but stopped on vcpu1.   Jeremy, could you please take a look on this issue? Could you give some idea on it? 

thanks,
James

2010/9/21 Keir Fraser <keir.fraser@xxxxxxxxxxxxx>

On 21/09/2010 06:02, "MaoXiaoyun" <tinnycloud@xxxxxxxxxxx> wrote:

> Take a look at domain 0 event channel with port 105,106, I find on port 105,
> it pending is
> 1.(in [1,0], first bit refer to pending, and is 1, second bit refer to mask,
> is 0).
>
> (XEN)      105 [1/0]: s=3 n=2 d=10 p=1 x=0
> (XEN)      106 [0/0]: s=3 n=2 d=10 p=2 x=0
>
> In all, we have domain U cpu blocking on _VPF_blocked_in_xen, and it must set
> the pending bit.
> Consider pending is 1, it looks like the irq is not triggered, am I  right ?
> Since if it is triggerred, it should clear the pending bit. (line 361).

Yes it looks like dom0 is not handling the event for some reason. Qemu looks
like it still works and is waiting for a notification via select(). But that
won't happen until dom0 kernel handles the event as an IRQ and calls the
relevant irq handler (drivers/xen/evtchn.c:evtchn_interrupt()).

I think you're on the right track in your debugging. I don't know much about
the pv_ops irq handling path, except to say that this aspect is different
than non-pv_ops kernels which special-case handling of events bound to
user-space rather more. So at the moment my best guess would be that the bug
is in the pv_ops kernel irq handling for this type of user-space-bound
event.

 -- Keir

> ------------------------------/linux-2.6-pvops.git/kernel/irq/chip.c---
> 354 void
> 355 handle_level_irq(unsigned int irq, struct irq_desc *desc)
> 356 {
> 357         struct irqaction *action;
> 358         irqreturn_t action_ret;
> 359
> 360         spin_lock(&desc->lock);
> 361         mask_ack_irq(desc, irq);
> 362
> 363         if (unlikely(desc->status & IRQ_INPROGRESS))
> 364                 goto out_unlock;
> 365         desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
> 366         kstat_incr_irqs_this_cpu(irq, desc);
> 367
>
> BTW, the qemu still works fine when VM is hang. Below is it strace output.
> No much difference between other well worked qemu instance, other than select
> all Timeout.
> -------------------
> select(14, [3 7 11 12 13], [], [], {0, 10000}) = 0 (Timeout)
> clock_gettime(CLOCK_MONOTONIC, {673470, 59535265}) = 0
> clock_gettime(CLOCK_MONOTONIC, {673470, 59629728}) = 0
> clock_gettime(CLOCK_MONOTONIC, {673470, 59717700}) = 0
> clock_gettime(CLOCK_MONOTONIC, {673470, 59806552}) = 0
> select(14, [3 7 11 12 13], [], [], {0, 10000}) = 0 (Timeout)
> clock_gettime(CLOCK_MONOTONIC, {673470, 70234406}) = 0
> clock_gettime(CLOCK_MONOTONIC, {673470, 70332116}) = 0
> clock_gettime(CLOCK_MONOTONIC, {673470, 70419835}) = 0
>
>
>
>
>> Date: Mon, 20 Sep 2010 10:35:46 +0100
>> Subject: Re: VM hung after running sometime
>> From: keir.fraser@xxxxxxxxxxxxx
>> To: tinnycloud@xxxxxxxxxxx
>> CC: xen-devel@xxxxxxxxxxxxxxxxxxx; jbeulich@xxxxxxxxxx
>>
>> On 20/09/2010 10:15, "MaoXiaoyun" <tinnycloud@xxxxxxxxxxx> wrote:
>>
>>> Thanks Keir.
>>>
>>> You're right, after I deeply looked into the wait_on_xen_event_channel, it
>>> is
>>> smart enough
>>> to avoid the race I assumed.
>>>
>>> How about prepare_wait_on_xen_event_channel ?
>>> Currently Istill don't know when it will be invoked.
>>> Could enlighten me?
>>
>> As you can see it is called from hvm_send_assist_req(), hence it is called
>> whenever an ioreq is sent to qemu-dm. Note that it is called *before*
>> qemu-dm is notified -- hence it cannot race the wakeup from qemu, as we will

>> not get woken until qemu-dm has done the work, and it cannot start the work

>> until it is notified, and it is not notified until after
>> prepare_wait_on_xen_event_channel has been executed.
>>
>> -- Keir
>>
>>>
>>>> Date: Mon, 20 Sep 2010 08:45:21 +0100
>>>> Subject: Re: VM hung after running sometime
>>>> From: keir.fraser@xxxxxxxxxxxxx
>>>> To: tinnycloud@xxxxxxxxxxx
>>>> CC: xen-devel@xxxxxxxxxxxxxxxxxxx; jbeulich@xxxxxxxxxx
>>>>
>>>> On 20/09/2010 07:00, "MaoXiaoyun" <tinnycloud@xxxxxxxxxxx> wrote:
>>>>
>>>>> When IO is not ready, domain U in VMEXIT->hvm_do_resume might invoke
>>>>> wait_on_xen_event_channel
>>>>> (where it is blocked in _VPF_blocked_in_xen).
>>>>>
>>>>> Here is my assumption of event missed.
>>>>>

>>>>> step 1: hvm_do_resume execute 260, and suppose p->state is

>>>>> STATE_IOREQ_READY
>>>>> or STATE_IOREQ_INPROCESS
>>>>> step 2: then in cpu_handle_ioreq is in line 547, it execute line 548 so
>>>>> quickly before hvm_do_resume execute line 270.
>>>>> Well, the event is missed.
>>>>> In other words, the _VPF_blocked_in_xen is cleared before it is actually
>>>>> setted, and Domian U who is blocked
>>>>> might never get unblocked, it this possible?
>>>>
>>>> Firstly, that code is very paranoid and it should never actually be the
>>>> case
>>>> that we see STATE_IOREQ_READY or STATE_IOREQ_INPROCESS in hvm_do_resume().
>>>> Secondly, even if you do, take a look at the implementation of
>>>> wait_on_xen_event_channel() -- it is smart enough to avoid the race you
>>>> mention.
>>>>
>>>> -- Keir
>>>>
>>>>
>>>
>>
>>
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel