[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Problem: Pattern with vertical colored lines on the dom0 screen



On Tue, Sep 28, 2010 at 04:54:05PM -0700, Kay, Allen M wrote:
> Thanks Konrad.  I got hold of a T410 and able to duplicate the problem with 
> the 2.6.36-rc5 kernel.
> 
> Currently, I'm encountering a problem with the latest xen/pvops kernel.  I'm 
> getting "No root device found ... Boot has failed, sleep forever."
> 
> If anyone knows how to fix this (i.e. which config to turn on), please let me 
> know.  My base OS is FC13.
> 

Does your initrd image have/load the proper driver for your disk controller? 
Did you see: http://wiki.xensource.com/xenwiki/Fedora13Xen4Tutorial ?

Does that system have a serial port, or SOL (on a management chip) ?

-- Pasi

> Allen
> 
> -----Original Message-----
> From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@xxxxxxxxxx] 
> Sent: Monday, September 27, 2010 9:47 AM
> To: Dietmar Hahn; Han, Weidong; Kay, Allen M
> Cc: Jean Guyader; xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-devel] Problem: Pattern with vertical colored lines on the 
> dom0 screen
> 
> On Mon, Sep 27, 2010 at 02:06:26PM +0200, Dietmar Hahn wrote:
> > Hi Jean,
> > 
> > many thanks for this hint! This saved me a lot of time searching through
> > the specs.
> > 
> > Am 24.09.2010 schrieb Jean Guyader:
> > > The problem we saw with that the bit 10 of the GCC (offset 0x52 on the
> > > PCH config space)
> > > wasn't set after the bios. This bit probably enable the shadow GTT
> > > (created with the GTT + vt-d).
> > 
> > Yes, the same problem here!
> > I found the following patch, maybe something similar would help here too?
> > https://patchwork.kernel.org/patch/132771
> 
> There looks to be another in the upstream kernels:
> 
> check_tylersburg_isoch
> > 
> > So I have to hit the bios development :-(
> 
> Well, we should probably provide a quirk check in the Xen code.
> 
> Copying the Intel folks to see if they any ideas on adding this in the Intel 
> VT-d
> code paths. Or they might have already a patch ready for this?
> > 
> > > The vertical stripes means GTT fault.
> > > 
> > > Jean
> > 
> > Many thanks!
> > Dietmar.
> > 
> > -- 
> > Company details: http://ts.fujitsu.com/imprint.html
> > 
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-devel
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.