|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [SPAM] pvops 2.6.32.23 failed to boot due to balloon.c
On 10/05/2010 01:13 PM, Jia Rao wrote:
> Hi all,
>
> I tried xen-4.0.2-rc1-pre with pvops 2.6.32.23 kernel. The linux
> kernel failed to boot due to something wrong in driver/xen/balloon.c
> Limiting dom0_mem=2048M solved the problem.
What changeset are you using?
J
>
> FYI.
> Dell PowerEdge 1950 III
> Intel Xeon E5450 quad-core CPU
> 8G memory
> dom0: CentOS 5.4
>
> The following is the console log from the failed boot. Search for
> balloon.c, you will locate the failed calltrace.
>
> Thanks,
> Jia
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Linux version 2.6.32.23 (jrao@cic104) (gcc version 4.1.2
> 20080704 (Red Hat 4.1.2-44)) #6 SMP Tue Oct 5 12:56:52 EDT 2010
> [ 0.000000] Command line: ro root=LABEL=/ console=ttyS0,115200n8
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] xen_release_chunk: looking at area pfn d0000-e0000: 65536
> pages freed
> [ 0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344
> pages freed
> [ 0.000000] released 122880 pages of unused memory
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
> [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
> [ 0.000000] Xen: 0000000000100000 - 00000000cfb50000 (usable)
> [ 0.000000] Xen: 00000000cfb50000 - 00000000cfb66000 (reserved)
> [ 0.000000] Xen: 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
> [ 0.000000] Xen: 00000000cfb85c00 - 00000000d0000000 (reserved)
> [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved)
> [ 0.000000] Xen: 0000000100000000 - 00000001f1ae8000 (usable)
> [ 0.000000] DMI 2.5 present.
> [ 0.000000] last_pfn = 0x1f1ae8 max_arch_pfn = 0x400000000
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
> 0x7010600070106
> [ 0.000000] last_pfn = 0xcfb50 max_arch_pfn = 0x400000000
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] modified physical RAM map:
> [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
> [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
> [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
> [ 0.000000] modified: 00000000000a0000 - 0000000000100000 (reserved)
> [ 0.000000] modified: 0000000000100000 - 00000000cfb50000 (usable)
> [ 0.000000] modified: 00000000cfb50000 - 00000000cfb66000 (reserved)
> [ 0.000000] modified: 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
> [ 0.000000] modified: 00000000cfb85c00 - 00000000d0000000 (reserved)
> [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
> [ 0.000000] modified: 0000000100000000 - 00000001f1ae8000 (usable)
> [ 0.000000] init_memory_mapping: 0000000000000000-0000
> <callto:000-0000>0000cfb50000
> [ 0.000000] init_memory_mapping: 0000000100000000-0000
> <callto:000-0000>0001f1ae8000
> [ 0.000000] RAMDISK: 01d9b000 - 02050600
> [ 0.000000] ACPI: RSDP 00000000000f21b0 00024 (v02 DELL )
> [ 0.000000] ACPI: XSDT 00000000000f224c 000CC (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: FACP 00000000cfb83524 000F4 (v03 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: DSDT 00000000cfb66000 04974 (v01 DELL PE_SC3
> 00000001 INTL 20050624)
> [ 0.000000] ACPI: FACS 00000000cfb85c00 00040
> [ 0.000000] ACPI: APIC 00000000cfb83078 00092 (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: SPCR 00000000cfb83130 00050 (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: HPET 00000000cfb83184 00038 (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: MCFG 00000000cfb831c0 0003C (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: WD__ 00000000cfb83200 00134 (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: SLIC 00000000cfb83338 00024 (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: ERST 00000000cfb6e2b8 00210 (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: HEST 00000000cfb6e4c8 0027C (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: BERT 00000000cfb6e138 0003 <callto:+1138%200003>0
> (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: EINJ 00000000cfb6e168 0015 <callto:+1168%200015>0
> (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: TCPA 00000000cfb834bc 00064 (v01 DELL PE_SC3
> 00000001 DELL 00000001)
> [ 0.000000] ACPI: SSDT 00000000cfb6a974 0049 <callto:+1974%200049>6
> (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6b01a 00496 (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6b6c0 00496 (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6bd66 00496 (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6c40c 00496 (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6cab2 00496 (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6d158 0049 <callto:+1158%200049>6
> (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6d7fe 00496 (v01 DELL PE_SC3
> 00000011 INTL 20050624)
> [ 0.000000] ACPI: SSDT 00000000cfb6dea4 00293 (v01 DELL PE_SC3
> 00000010 INTL 20050624)
> [ 0.000000] (10 early reservations) ==> bootmem [0000000000 -
> 01f1ae8000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
> [0000000000 - 0000001000]
> [ 0.000000] #1 [0002fe0000 - 0002ffd000] XEN PAGETABLES ==>
> [0002fe0000 - 0002ffd000]
> [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
> [0000006000 - 0000008000]
> [ 0.000000] #3 [0001000000 - 0001c713c4] TEXT DATA BSS ==>
> [0001000000 - 0001c713c4]
> [ 0.000000] #4 [0001d9b000 - 0002050600] RAMDISK ==>
> [0001d9b000 - 0002050600]
> [ 0.000000] #5 [0002051000 - 0002fe0000] XEN START INFO ==>
> [0002051000 - 0002fe0000]
> [ 0.000000] #6 [0100000000 - 015c518000] XEN EXTRA ==>
> [0100000000 - 015c518000]
> [ 0.000000] #7 [0001c72000 - 0001c832d9] BRK ==>
> [0001c72000 - 0001c832d9]
> [ 0.000000] #8 [0000100000 - 0000763000] PGTABLE ==>
> [0000100000 - 0000763000]
> [ 0.000000] #9 [0002ffd000 - 000378f000] PGTABLE ==>
> [0002ffd000 - 000378f000]
> [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x001f1ae8
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[4] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x00000001
> [ 0.000000] 0: 0x00000006 -> 0x000000a0
> [ 0.000000] 0: 0x00000100 -> 0x000cfb50
> [ 0.000000] 0: 0x00100000 -> 0x001f1ae8
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000,
> GSI 0-0
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 0000000000001000 -
> 0000000000006000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000cfb50000 -
> 00000000cfb66000
> [ 0.000000] PM: Registered nosave memory: 00000000cfb66000 -
> 00000000cfb85000
> [ 0.000000] PM: Registered nosave memory: 00000000cfb85000 -
> 00000000cfb86000
> [ 0.000000] PM: Registered nosave memory: 00000000cfb86000 -
> 00000000d0000000
> [ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
> 00000000e0000000
> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
> 00000000f0000000
> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
> 00000000fe000000
> [ 0.000000] PM: Registered nosave memory: 00000000fe000000 -
> 0000000100000000
> [ 0.000000] Allocating PCI resources starting at d0000000 (gap:
> d0000000:10000000)
> [ 0.000000] Booting paravirtualized kernel on Xen
> [ 0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)
> [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880028038000 s89624
> r8192 d20968 u118784
> [ 0.000000] pcpu-alloc: s89624 r8192 d20968 u118784 alloc=29*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 1811086
> [ 0.000000] Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11,
> 8388608 bytes)
> [ 0.000000] Inode-cache hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] DMA: Placing 64MB software IO TLB between
> ffff880020000000 - ffff880024000000
> [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000
> [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
> [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
> [ 0.000000] Memory: 5621304k/8154016k available (6859k kernel code,
> 791636k absent, 1740080k reserved, 4237k data, 536k init)
> [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=8, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:4352 nr_irqs:2304
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c
> polarity=1
> [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
> [ 0.000000] xen: acpi sci 9
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] installing Xen timer for CPU 0
> [ 0.000000] Detected 2992.618 MHz processor.
> [ 0.000999] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 5985.23 BogoMIPS (lpj=2992618)
> [ 0.001020] Security Framework initialized
> [ 0.001999] SELinux: Initializing.
> [ 0.001999] Mount-cache hash table entries: 256
> [ 0.002201] Initializing cgroup subsys ns
> [ 0.002999] Initializing cgroup subsys cpuacct
> [ 0.002999] Initializing cgroup subsys freezer
> [ 0.003022] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.003999] CPU: L2 cache: 6144K
> [ 0.004004] CPU: Physical Processor ID: 0
> [ 0.004999] CPU: Processor Core ID: 0
> [ 0.005004] mce: CPU supports 6 MCE banks
> [ 0.006015] Performance Events: unsupported p6 CPU model 23 no PMU
> driver, software events only.
> [ 0.006998] SMP alternatives: switching to UP code
> [ 0.007006] ACPI: Core revision 20090903
> [ 0.018279] installing Xen timer for CPU 1
> [ 0.019035] SMP alternatives: switching to SMP code
> [ 0.000999] Initializing CPU#1
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 6144K
> [ 0.000999] CPU: Physical Processor ID: 1
> [ 0.000999] CPU: Processor Core ID: 0
> [ 0.020238] installing Xen timer for CPU 2
> [ 0.000999] Initializing CPU#2
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 6144K
> [ 0.000999] CPU: Physical Processor ID: 0
> [ 0.000999] CPU: Processor Core ID: 2
> [ 0.021293] installing Xen timer for CPU 3
> [ 0.000999] Initializing CPU#3
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 6144K
> [ 0.000999] CPU: Physical Processor ID: 1
> [ 0.000999] CPU: Processor Core ID: 2
> [ 0.022262] installing Xen timer for CPU 4
> [ 0.000999] Initializing CPU#4
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 6144K
> [ 0.000999] CPU: Physical Processor ID: 0
> [ 0.000999] CPU: Processor Core ID: 1
> [ 0.023210] installing Xen timer for CPU 5
> [ 0.000999] Initializing CPU#5
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 6144K
> [ 0.000999] CPU: Physical Processor ID: 1
> [ 0.000999] CPU: Processor Core ID: 1
> [ 0.024214] installing Xen timer for CPU 6
> [ 0.000999] Initializing CPU#6
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 6144K
> [ 0.000999] CPU: Physical Processor ID: 0
> [ 0.000999] CPU: Processor Core ID: 3
> [ 0.025229] installing Xen timer for CPU 7
> [ 0.000999] Initializing CPU#7
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 6144K
> [ 0.000999] CPU: Physical Processor ID: 1
> [ 0.000999] CPU: Processor Core ID: 3
> [ 0.026166] Brought up 8 CPUs
> [ 0.028121] Grant table initialized
> [ 0.029033] NET: Registered protocol family 16
> [ 0.031039] ACPI FADT declares the system doesn't support PCIe ASPM,
> so disable it
> [ 0.031995] ACPI: bus type pci registered
> [ 0.033056] PCI: MCFG configuration 0: base e0000000 segment 0 buses
> 0 - 255
> [ 0.033994] PCI: MCFG area at e0000000 reserved in E820
> [ 0.079095] PCI: Using MMCONFIG at e0000000 - efffffff
> [ 0.079987] PCI: Using configuration type 1 for base access
> [ 0.079987] PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort.
> [ 0.107000] bio: create slab <bio-0> at 0
> [ 0.109384] ERROR: Unable to locate IOAPIC for GSI 9
> [ 0.112944] ACPI Error (psargs-0359): [CDW1] Namespace lookup
> failure, AE_NOT_FOUND
> [ 0.112982] ACPI Error (psparse-0537): Method parse/execution failed
> [\_SB_._OSC] (Node ffff8801f1404760), AE_NOT_FOUND
> [ 0.114889] ACPI: BIOS _OSI(Linux) query ignored
> [ 0.119506] ACPI: Interpreter enabled
> [ 0.119981] ACPI: (supports S0 S4 S5)
> [ 0.119981] ACPI: Using IOAPIC for interrupt routing
> [ 0.144495] ACPI: No dock devices found.
> [ 0.148165] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.153130] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:00.0: PME# disabled
> [ 0.153976] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:02.0: PME# disabled
> [ 0.153976] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:03.0: PME# disabled
> [ 0.153976] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:04.0: PME# disabled
> [ 0.153976] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:05.0: PME# disabled
> [ 0.153976] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:06.0: PME# disabled
> [ 0.153976] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:07.0: PME# disabled
> [ 0.153976] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.153976] pci 0000:00:1c.0: PME# disabled
> [ 0.234361] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.234964] pci 0000:00:1d.7: PME# disabled
> [ 0.234964] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
> [ 0.234964] pci 0000:04:00.0: PME# disabled
> [ 0.234964] pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
> [ 0.234964] pci 0000:04:00.3: PME# disabled
> [ 0.234964] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
> [ 0.234964] pci 0000:05:00.0: PME# disabled
> [ 0.234964] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
> [ 0.234964] pci 0000:05:01.0: PME# disabled
> [ 0.234964] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
> [ 0.234964] pci 0000:06:00.0: PME# disabled
> [ 0.234964] pci 0000:07:00.0: PME# supported from D3hot D3cold
> [ 0.234964] pci 0000:07:00.0: PME# disabled
> [ 0.234964] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 0.234964] pci 0000:02:00.0: PME# disabled
> [ 0.234964] pci 0000:03:00.0: PME# supported from D3hot D3cold
> [ 0.234964] pci 0000:03:00.0: PME# disabled
> [ 0.350141] pci 0000:00:1e.0: transparent bridge
> [ 0.368092] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 *6 7 10 11 12)
> [ 0.368951] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12)
> *0, disabled.
> [ 0.368951] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12)
> *0, disabled.
> [ 0.368951] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12)
> [ 0.368951] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
> [ 0.368951] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
> [ 0.368951] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12)
> *0, disabled.
> [ 0.368951] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12)
> *0, disabled.
> [ 0.424003] xen_balloon: Initialising balloon driver with page order 0.
> [ 0.431002] last_pfn = 0x1f1ae8 max_arch_pfn = 0x400000000
> [ 0.444032] vgaarb: device added:
> PCI:0000:0e:0d.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.444951] vgaarb: loaded
> [ 0.455011] SCSI subsystem initialized
> [ 0.460054] usbcore: registered new interface driver usbfs
> [ 0.466009] usbcore: registered new interface driver hub
> [ 0.470993] usbcore: registered new device driver usb
> [ 0.476983] PCI: Using ACPI for IRQ routing
> [ 0.482057] cfg80211: Using static regulatory domain info
> [ 0.482951] cfg80211: Regulatory domain: US
> [ 0.482951] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
> max_eirp)
> [ 0.482951] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi,
> 2700 mBm)
> [ 0.482951] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi,
> 2300 mBm)
> [ 0.482951] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi,
> 2300 mBm)
> [ 0.482951] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi,
> 2300 mBm)
> [ 0.482951] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi,
> 2300 mBm)
> [ 0.482951] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi,
> 3000 mBm)
> [ 0.535965] cfg80211: Calling CRDA for country: US
> [ 0.540983] NetLabel: Initializing
> [ 0.541951] NetLabel: domain hash size = 128
> [ 0.541951] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.541951] NetLabel: unlabeled traffic allowed by default
> [ 0.558140] Switching to clocksource xen
> [ 0.566033] pnp: PnP ACPI init
> [ 0.569116] ACPI: bus type pnp registered
> [ 0.573923] xen_allocate_pirq: returning irq 13 for gsi 13
> [ 0.579899] xen_allocate_pirq: returning irq 8 for gsi 8
> [ 0.586186] xen_allocate_pirq: returning irq 4 for gsi 4
> [ 0.592155] xen_allocate_pirq: returning irq 3 for gsi 3
> [ 0.602971] pnp: PnP ACPI: found 12 devices
> [ 0.603524] ACPI: ACPI bus type pnp unregistered
> [ 0.603524] system 00:08: ioport range 0x800-0x87f has been reserved
> [ 0.603524] system 00:08: ioport range 0x880-0x8bf has been reserved
> [ 0.603524] system 00:08: ioport range 0x8c0-0x8df has been reserved
> [ 0.603524] system 00:08: ioport range 0x8e0-0x8e3 has been reserved
> [ 0.603524] system 00:08: ioport range 0x900-0x900 has been reserved
> [ 0.603524] system 00:08: ioport range 0xc00-0xc7f has been reserved
> [ 0.603524] system 00:08: ioport range 0xca0-0xca7 has been reserved
> [ 0.603524] system 00:08: ioport range 0xca9-0xcab has been reserved
> [ 0.603524] system 00:08: ioport range 0xcad-0xcaf has been reserved
> [ 0.603524] system 00:09: ioport range 0xca8-0xca8 has been reserved
> [ 0.603524] system 00:09: ioport range 0xcac-0xcac has been reserved
> [ 0.603524] system 00:0a: iomem range 0xe0000000-0xefffffff has been
> reserved
> [ 0.694730] PM-Timer failed consistency check (0x0xffffff) - aborting.
> [ 0.695439] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
> [ 0.695439] pci 0000:06:00.0: IO window: disabled
> [ 0.695439] pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff
> [ 0.695439] pci 0000:06:00.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
> [ 0.695439] pci 0000:05:00.0: IO window: disabled
> [ 0.695439] pci 0000:05:00.0: MEM window: 0xf4000000-0xf7ffffff
> [ 0.695439] pci 0000:05:00.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:05:01.0: PCI bridge, secondary bus 0000:08
> [ 0.695439] pci 0000:05:01.0: IO window: disabled
> [ 0.695439] pci 0000:05:01.0: MEM window: disabled
> [ 0.695439] pci 0000:05:01.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
> [ 0.695439] pci 0000:04:00.0: IO window: disabled
> [ 0.695439] pci 0000:04:00.0: MEM window: 0xf4000000-0xf7ffffff
> [ 0.695439] pci 0000:04:00.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:04:00.3: PCI bridge, secondary bus 0000:09
> [ 0.695439] pci 0000:04:00.3: IO window: disabled
> [ 0.695439] pci 0000:04:00.3: MEM window: disabled
> [ 0.695439] pci 0000:04:00.3: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:02.0: PCI bridge, secondary bus 0000:04
> [ 0.695439] pci 0000:00:02.0: IO window: disabled
> [ 0.695439] pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff
> [ 0.695439] pci 0000:00:02.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
> [ 0.695439] pci 0000:00:03.0: IO window: 0xe000-0xefff
> [ 0.695439] pci 0000:00:03.0: MEM window: 0xfc300000-0xfc5fffff
> [ 0.695439] pci 0000:00:03.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:04.0: PCI bridge, secondary bus 0000:0a
> [ 0.695439] pci 0000:00:04.0: IO window: disabled
> [ 0.695439] pci 0000:00:04.0: MEM window: disabled
> [ 0.695439] pci 0000:00:04.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0b
> [ 0.695439] pci 0000:00:05.0: IO window: disabled
> [ 0.695439] pci 0000:00:05.0: MEM window: disabled
> [ 0.695439] pci 0000:00:05.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0c
> [ 0.695439] pci 0000:00:06.0: IO window: disabled
> [ 0.695439] pci 0000:00:06.0: MEM window: disabled
> [ 0.695439] pci 0000:00:06.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0d
> [ 0.695439] pci 0000:00:07.0: IO window: disabled
> [ 0.695439] pci 0000:00:07.0: MEM window: disabled
> [ 0.695439] pci 0000:00:07.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
> [ 0.695439] pci 0000:02:00.0: IO window: disabled
> [ 0.695439] pci 0000:02:00.0: MEM window: 0xf8000000-0xfbffffff
> [ 0.695439] pci 0000:02:00.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> [ 0.695439] pci 0000:00:1c.0: IO window: disabled
> [ 0.695439] pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff
> [ 0.695439] pci 0000:00:1c.0: PREFETCH window: disabled
> [ 0.695439] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e
> [ 0.695439] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
> [ 0.695439] pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff
> [ 0.695439] pci 0000:00:1e.0: PREFETCH window:
> 0x000000d8000000-0x000000dfffffff
> [ 1.012173] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.013154] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 1.024509] Already setup the GSI :16
> [ 1.025505] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.025505] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 1.040622] Already setup the GSI :16
> [ 1.041617] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.041617] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 1.057048] Already setup the GSI :16
> [ 1.058044] pci 0000:05:01.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.058044] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 1.073308] Already setup the GSI :16
> [ 1.074303] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.074303] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 1.089155] Already setup the GSI :16
> [ 1.090151] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.090151] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 1.105016] Already setup the GSI :16
> [ 1.106010] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.106010] xen_allocate_pirq: returning irq 16 for gsi 16
> [ 1.120874] Already setup the GSI :16
> [ 1.121869] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 1.121869] NET: Registered protocol family 2
> [ 1.135776] IP route cache hash table entries: 262144 (order: 9,
> 2097152 bytes)
> [ 1.143882] TCP established hash table entries: 262144 (order: 10,
> 4194304 bytes)
> [ 1.144780] TCP bind hash table entries: 65536 (order: 8, 1048576
> bytes)
> [ 1.144780] TCP: Hash tables configured (established 262144 bind 65536)
> [ 1.144780] TCP reno registered
> [ 1.144780] NET: Registered protocol family 1
> [ 1.174826] RPC: Registered udp transport module.
> [ 1.175732] RPC: Registered tcp transport module.
> [ 1.175732] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 1.190860] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
> [ 1.197132] Trying to unpack rootfs image as initramfs...
> [ 1.205725] Freeing initrd memory: 2773k freed
> [ 1.206442] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 1.206442] DMA: Placing 64MB software IO TLB between
> ffff880020000000 - ffff880024000000
> [ 1.206442] DMA: software IO TLB at phys 0x20000000 - 0x24000000
> [ 1.231298] kvm: no hardware support
> [ 1.232268] has_svm: not amd
> [ 1.232268] kvm: no hardware support
> [ 1.251374] Microcode Update Driver: v2.00
> <tigran@xxxxxxxxxxxxxxxxxxxx <mailto:tigran@xxxxxxxxxxxxxxxxxxxx>>,
> Peter Oruba
> [ 1.252361] Scanning for low memory corruption every 60 seconds
> [ 1.265938] audit: initializing netlink socket (disabled)
> [ 1.271347] type=2000 audit(1286307216.193:1): initialized
> [ 1.285580] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.300285] VFS: Disk quotas dquot_6.5.2
> [ 1.304392] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.313459] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx
> <mailto:okir@xxxxxxxxxxxx>).
> [ 1.320630] OCFS2 1.5.0
> [ 1.324237] ocfs2: Registered cluster interface o2cb
> [ 1.326194] OCFS2 Node Manager 1.5.0
> [ 1.333051] OCFS2 DLM 1.5.0
> [ 1.334034] OCFS2 DLMFS 1.5.0
> [ 1.339087] OCFS2 User DLM kernel interface loaded
> [ 1.340045] msgmni has been set to 10986
> [ 1.349436] alg: No test for stdrng (krng)
> [ 1.353843] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 252)
> [ 1.354830] io scheduler noop registered
> [ 1.354830] io scheduler anticipatory registered
> [ 1.354830] io scheduler deadline registered
> [ 1.374221] io scheduler cfq registered (default)
> [ 1.395873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.402413] input: Power Button as /class/input/input0
> [ 1.403396] ACPI: Power Button [PWRF]
> [ 1.412855] Marking TSC unstable due to TSC halts in idle
> [ 1.418313] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.424834] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.431278] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.437730] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.444189] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.450639] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.457086] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.463609] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.473921] Event-channel device installed.
> [ 1.481040] ------------[ cut here ]------------
> [ 1.482005] kernel BUG at
> /home/jrao/xen-4.0-testing.hg/linux-2.6-pvops.git/drivers/xen/balloon.c:271!
> [ 1.482005] invalid opcode: 0000 [#1] SMP
> [ 1.482005] last sysfs file:
> [ 1.482005] CPU 0
> [ 1.482005] Modules linked in:
> [ 1.482005] Pid: 19, comm: events/0 Not tainted 2.6.32.23 #6
> PowerEdge 1950
> [ 1.482005] RIP: e030:[<ffffffff8134457e>] [<ffffffff8134457e>]
> balloon_process+0x1e3/0x5a8
> [ 1.482005] RSP: e02b:ffff8801f150bdc0 EFLAGS: 00010216
> [ 1.482005] RAX: 000000000009d730 RBX: ffff88002c5acd08 RCX:
> ffff88002c5b3d30
> [ 1.482005] RDX: ffffffff81c7a000 RSI: ffff8801f150be20 RDI:
> 0000000000000ae2
> [ 1.482005] RBP: ffff8801f150be70 R08: ffff8801f150a000 R09:
> dead000000200200
> [ 1.482005] R10: dead000000100100 R11: 0000000000000000 R12:
> 000000000015c517
> [ 1.482005] R13: 0000000000206323 R14: ffff88002c5b3d08 R15:
> ffffffff8134439b
> [ 1.482005] FS: 0000000000000000(0000) GS:ffff880028038000(0000)
> knlGS:0000000000000000
> [ 1.482005] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 1.482005] CR2: 0000000000000000 CR3: 0000000001001000 CR4:
> 0000000000002660
> [ 1.482005] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> [ 1.482005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
> 0000000000000400
> [ 1.482005] Process events/0 (pid: 19, threadinfo ffff8801f150a000,
> task ffff8801f14ebc00)
> [ 1.482005] Stack:
> [ 1.482005] 00000000000002c0 0000000000000200 0000
> <callto:+1200%200000>020081a0eec0
> 0000000000000200
> [ 1.482005] <0> ffff8801f150bdf0 ffffffff81067b0f ffff8801f150be70
> 0000000000000000
> [ 1.482005] <0> ffff880028040288 0000
> <callto:+1288%200000>000000000008 ffff8801f14ebc00
> ffff8801f1478000
> [ 1.482005] Call Trace:
> [ 1.482005] [<ffffffff81067b0f>] ? need_resched+0x1e/0x28
> [ 1.482005] [<ffffffff8134439b>] ? balloon_process+0x0/0x5a8
> [ 1.482005] [<ffffffff8108991f>] worker_thread+0x144/0x1e0
> [ 1.482005] [<ffffffff8108ce92>] ? autoremove_wake_function+0x0/0x38
> [ 1.482005] [<ffffffff810897db>] ? worker_thread+0x0/0x1e0
> [ 1.482005] [<ffffffff8108cb0f>] kthread+0x69/0x71
> [ 1.482005] [<ffffffff8103ccea>] child_rip+0xa/0x20
> [ 1.482005] [<ffffffff8103bea1>] ? int_ret_from_sys_call+0x7/0x1b
> [ 1.482005] [<ffffffff8103c65d>] ? retint_restore_args+0x5/0x6
> [ 1.482005] [<ffffffff8103cce0>] ? child_rip+0x0/0x20
> [ 1.482005] Code: 4c 0f af e0 80 3d c4 b1 78 00 00 48 8b 45 88 4c 8b
> 2c c5 60 17 c5 81 75 0d 4c 89 e7 e8 21 1a cf ff 48 ff c0 75 05 45 31 ff
> eb 5a <0f> 0
> [ 1.482005] RIP [<ffffffff8134457e>] balloon_process+0x1e3/0x5a8
> [ 1.482005] RSP <ffff8801f150bdc0>
> [ 1.482005] ---[ end trace a7919e7f17c0a725 ]---
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |