|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [GIT PULL] Xen updates
Wednesday, October 27, 2010, 10:05:47 PM, you wrote: > On 10/27/2010 12:40 PM, Sander Eikelenboom wrote: >> Ah ok you are (of course) completely right thx ! >> What strikes me now .. is that when i used this xhci controller passed >> through to a domU i: >> a) saw only one IRQ/vector coupled to xhci_hcd in the /proc/interrupts >> b) i don't see them being counted now in the dom0 although i use the >> controller (i the domU this caused +/- 8000 interrupts a second .. so i >> should be seeing something else the 0 i assume. > The device is working but you're not seeing any interrupts for it? Strange. > J Grmbll sorry my mistake, early this day i shoved it in a USB2 port, to see if a problem with the driver of the videograbber had any relation to usb2/usb3 controller. But it didn't and was allready fixed. Shoved it back in on the xhci controller and it counts fine now ... Sorry for the noise ! And congratulations to you all on achieving this !! Can't wait for pciback support :-) -- Sander >> -- >> Sander >> >> >> CPU0 CPU1 CPU2 CPU3 >> 1: 8 0 0 0 xen-pirq-ioapic-edge >> i8042 >> 8: 0 0 0 0 xen-pirq-ioapic-edge rtc0 >> 9: 0 0 0 0 xen-pirq-ioapic-level >> acpi >> 12: 103 0 0 0 xen-pirq-ioapic-edge >> i8042 >> 16: 0 0 0 0 xen-pirq-ioapic-level >> uhci_hcd:usb3 >> 18: 0 0 0 0 xen-pirq-ioapic-level >> ehci_hcd:usb1, uhci_hcd:usb5, uhci_hcd:usb8 >> 19: 0 0 0 0 xen-pirq-ioapic-level >> uhci_hcd:usb7 >> 21: 0 0 0 0 xen-pirq-ioapic-level >> uhci_hcd:usb4 >> 23: 73410 0 0 0 xen-pirq-ioapic-level >> ehci_hcd:usb2, uhci_hcd:usb6 >> 990: 0 0 0 0 xen-dyn-event >> evtchn:xenstored >> 991: 188 0 0 0 xen-dyn-event >> evtchn:xenstored >> 992: 10583 0 0 0 xen-pirq-msi eth1 >> 993: 1 0 0 0 xen-pirq-msi >> 994: 0 0 0 0 xen-pirq-msi-x >> xhci_hcd >> 995: 0 0 0 0 xen-pirq-msi-x >> xhci_hcd >> 996: 0 0 0 0 xen-pirq-msi-x >> xhci_hcd >> 997: 0 0 0 0 xen-pirq-msi-x >> xhci_hcd >> 998: 1 0 0 0 xen-pirq-msi-x >> xhci_hcd >> 1000: 51648 0 0 0 xen-pirq-msi ahci >> 1001: 1 0 0 0 xen-pirq-msi i915 >> 1002: 0 0 0 0 xen-percpu-virq >> hvc_console >> 1003: 133 0 0 0 xen-dyn-event xenbus >> 1004: 0 0 0 15729 xen-percpu-ipi >> callfuncsingle3 >> 1005: 0 0 0 0 xen-percpu-virq >> debug3 >> 1006: 0 0 0 538 xen-percpu-ipi >> callfunc3 >> 1007: 0 0 0 24048 xen-percpu-ipi >> resched3 >> 1008: 0 0 0 525075 xen-percpu-virq >> timer3 >> 1009: 0 0 19569 0 xen-percpu-ipi >> callfuncsingle2 >> 1010: 0 0 0 0 xen-percpu-virq >> debug2 >> 1011: 0 0 451 0 xen-percpu-ipi >> callfunc2 >> 1012: 0 0 23590 0 xen-percpu-ipi >> resched2 >> 1013: 0 0 523891 0 xen-percpu-virq >> timer2 >> 1014: 0 13911 0 0 xen-percpu-ipi >> callfuncsingle1 >> 1015: 0 0 0 0 xen-percpu-virq >> debug1 >> 1016: 0 563 0 0 xen-percpu-ipi >> callfunc1 >> 1017: 0 22079 0 0 xen-percpu-ipi >> resched1 >> 1018: 0 519767 0 0 xen-percpu-virq >> timer1 >> 1019: 1445 0 0 0 xen-percpu-ipi >> callfuncsingle0 >> 1020: 0 0 0 0 xen-percpu-virq >> debug0 >> 1021: 395 0 0 0 xen-percpu-ipi >> callfunc0 >> 1022: 22182 0 0 0 xen-percpu-ipi >> resched0 >> 1023: 583133 0 0 0 xen-percpu-virq >> timer0 >> NMI: 0 0 0 0 Non-maskable interrupts >> LOC: 0 0 0 0 Local timer interrupts >> SPU: 0 0 0 0 Spurious interrupts >> PMI: 0 0 0 0 Performance monitoring >> interrupts >> IWI: 0 0 0 0 IRQ work interrupts >> RES: 22182 22079 23590 24048 Rescheduling interrupts >> CAL: 1840 14474 20020 16268 Function call interrupts >> TLB: 0 0 0 0 TLB shootdowns >> TRM: 0 0 0 0 Thermal event interrupts >> THR: 0 0 0 0 Threshold APIC interrupts >> MCE: 0 0 0 0 Machine check exceptions >> MCP: 0 0 0 0 Machine check polls >> ERR: 0 >> MIS: 0 >> >> -- Best regards, Sander mailto:linux@xxxxxxxxxxxxxx _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |