[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] IRQ affinity: Xen view different from pvops (konrad-pcifront) domU
I have a Fibre Channel HBA that I'm passing through to the pvops domU. In domU its IRQ 127 and I've affinitized it to VCPU0 (out of 16) by setting /proc/irq/127/smp_affinity to 0001 (default setting was FFFF). However, when I checked the interrupt bindings in Xen, it still shows IRQ 127 as being affinitized to all CPUs (all F's). I checked lspci in both dom0 and domU and the address portion (00000000fee00000) of the MSI address/data seem to match Xen's interrupt binding report (I expected the digits to the right of 'fee' to be non-zero if it's affinitized to one specific CPU). I've tried using a recent Ubuntu HVM kernel for domU instead of Konrad's pcifront pvops kernel and with the HVM kernel, Xen's interrupt binding matches the IRQ smp_affinity in domU. Am I not correctly interpreting the apparent affinity discrepancy between Xen and pvops domU or is there a known limitation or problem with affinitizing IRQs in Konrad's pcifront pvops domU kernel? from Konrad's pcifront pvop domU: lspci -vv -s 00:00.0 00:00.0 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 08) Interrupt: pin D routed to IRQ 127 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee00000 Data: 4043 Capabilities: [b0] MSI-X: Enable- Mask- TabSize=9 Vector table: BAR=4 offset=00004100 PBA: BAR=4 offset=00004000 cat /proc/irq/127/smp_affinity 0001 uname -a Linux kaan-40-dpm 2.6.36-rc7-pvops-kpcif-08-2-domu-5.8.dcinco-debug #1 SMP Tue Nov 9 10:36:45 PST 2010 x86_64 GNU/Linux from 2.6.32.25 pvops dom0: lspci -vv -s 11:00.3 11:00.3 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 08) Interrupt: pin D routed to IRQ 4426 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee00000 Data: 4043 Capabilities: [b0] MSI-X: Enable- Mask- TabSize=9 Vector table: BAR=4 offset=00004100 PBA: BAR=4 offset=00004000 uname -a Linux kaan-40 2.6.32.25-pvops-stable-dom0-5.7.dcinco-debug #1 SMP PREEMPT Fri Nov 5 16:13:32 PDT 2010 x86_64 GNU/Linux (XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to DOM0) (XEN) Guest interrupt information: (XEN) IRQ: 67 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:43 type=PCI-MSI status=00000010 in-flight=0 domain-list=2:127(----), xm list Name ID Mem VCPUs State Time(s) Domain-0 0 1024 1 r----- 43.6 domU 2 2048 16 -b---- 63.0 xm vcpu-list Name ID VCPU CPU State Time(s) CPU Affinity Domain-0 0 0 0 r-- 44.7 0 domU 2 0 0 -b- 17.1 0 domU 2 1 1 -b- 4.9 1 domU 2 2 2 -b- 3.1 2 domU 2 3 3 -b- 4.7 3 domU 2 4 4 -b- 3.0 4 domU 2 5 5 -b- 3.9 5 domU 2 6 6 -b- 4.9 6 domU 2 7 7 -b- 1.9 7 domU 2 8 8 -b- 3.7 8 domU 2 9 9 -b- 1.8 9 domU 2 10 10 -b- 1.8 10 domU 2 11 11 -b- 4.3 11 domU 2 12 12 -b- 2.8 12 domU 2 13 13 -b- 2.7 13 domU 2 14 14 -b- 1.9 14 domU 2 15 15 -b- 3.9 15 xm info release : 2.6.32.25-pvops-stable-dom0-5.7.dcinco-debug version : #1 SMP PREEMPT Fri Nov 5 16:13:32 PDT 2010 machine : x86_64 hw_caps : bfebfbff:2c100800:00000000:00001f40:029ee3ff:00000000:00000001:00000000 max_node_id : 1 xen_major : 4 xen_minor : 0 xen_extra : .2-rc1-pre xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 xen_changeset : Fri Sep 17 17:06:57 2010 +0100 21350:6e0ffcd2d9e0 xen_commandline : dummy=dummy dom0_mem=1024M dom0_max_vcpus=1 dom0_vcpus_pin=true iommu=1,passthrough,no-intremap loglvl=all loglvl_guest=all loglevl=10 debug apic=on apic_verbosity=verbose extra_guest_irqs=80 com1=115200,8n1 console=com1 console_to_ring noirqbalance xen-pciback.permissive acpi=force numa=on - Dante _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |