|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: [PATCH V2 1/3] Introduce log_start/log_stop in CPUPhysMemoryClient
Send patch updates always with proper "[PATCH]" tag, they may get lost
otherwise.
On 2011-01-18 13:25, anthony.perard@xxxxxxxxxx wrote:
> From: Anthony PERARD <anthony.perard@xxxxxxxxxx>
>
> In order to use log_start/log_stop with Xen as well in the vga code,
> this two operations have been put in CPUPhysMemoryClient.
>
> The two new functions cpu_physical_log_start,cpu_physical_log_stop are
> used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does
> no longer depends on kvm header.
>
> Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
> ---
> cpu-all.h | 6 ++++++
> cpu-common.h | 4 ++++
> exec.c | 28 ++++++++++++++++++++++++++++
> hw/vga.c | 31 ++++++++++++++++---------------
> hw/vhost.c | 2 ++
> kvm-all.c | 8 ++++++--
> kvm-stub.c | 10 ----------
> kvm.h | 3 ---
> 8 files changed, 62 insertions(+), 30 deletions(-)
>
> diff --git a/cpu-all.h b/cpu-all.h
> index 30ae17d..aaf5442 100644
> --- a/cpu-all.h
> +++ b/cpu-all.h
> @@ -957,6 +957,12 @@ int cpu_physical_memory_get_dirty_tracking(void);
> int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr,
> target_phys_addr_t end_addr);
>
> +int cpu_physical_log_start(target_phys_addr_t start_addr,
> + ram_addr_t size);
> +
> +int cpu_physical_log_stop(target_phys_addr_t start_addr,
> + ram_addr_t size);
> +
> void dump_exec_info(FILE *f, fprintf_function cpu_fprintf);
> #endif /* !CONFIG_USER_ONLY */
>
> diff --git a/cpu-common.h b/cpu-common.h
> index 8ec01f4..2344842 100644
> --- a/cpu-common.h
> +++ b/cpu-common.h
> @@ -88,6 +88,10 @@ struct CPUPhysMemoryClient {
> target_phys_addr_t end_addr);
> int (*migration_log)(struct CPUPhysMemoryClient *client,
> int enable);
> + int (*log_start)(struct CPUPhysMemoryClient *client,
> + target_phys_addr_t phys_addr, ram_addr_t size);
> + int (*log_stop)(struct CPUPhysMemoryClient *client,
> + target_phys_addr_t phys_addr, ram_addr_t size);
> QLIST_ENTRY(CPUPhysMemoryClient) list;
> };
>
> diff --git a/exec.c b/exec.c
> index c6ed96d..59a6426 100644
> --- a/exec.c
> +++ b/exec.c
> @@ -2073,6 +2073,34 @@ int cpu_physical_sync_dirty_bitmap(target_phys_addr_t
> start_addr,
> return ret;
> }
>
> +int cpu_physical_log_start(target_phys_addr_t start_addr,
> + ram_addr_t size)
> +{
> + CPUPhysMemoryClient *client;
> + QLIST_FOREACH(client, &memory_client_list, list) {
> + if (client->log_start) {
> + int r = client->log_start(client, start_addr, size);
> + if (r < 0)
> + return r;
> + }
> + }
> + return 0;
> +}
> +
> +int cpu_physical_log_stop(target_phys_addr_t start_addr,
> + ram_addr_t size)
> +{
> + CPUPhysMemoryClient *client;
> + QLIST_FOREACH(client, &memory_client_list, list) {
> + if (client->log_stop) {
> + int r = client->log_stop(client, start_addr, size);
> + if (r < 0)
> + return r;
> + }
> + }
> + return 0;
> +}
> +
> static inline void tlb_update_dirty(CPUTLBEntry *tlb_entry)
> {
> ram_addr_t ram_addr;
> diff --git a/hw/vga.c b/hw/vga.c
> index c057f4f..a9bf172 100644
> --- a/hw/vga.c
> +++ b/hw/vga.c
> @@ -28,7 +28,6 @@
> #include "vga_int.h"
> #include "pixel_ops.h"
> #include "qemu-timer.h"
> -#include "kvm.h"
>
> //#define DEBUG_VGA
> //#define DEBUG_VGA_MEM
> @@ -1597,34 +1596,36 @@ static void vga_sync_dirty_bitmap(VGACommonState *s)
>
> void vga_dirty_log_start(VGACommonState *s)
> {
> - if (kvm_enabled() && s->map_addr)
> - kvm_log_start(s->map_addr, s->map_end - s->map_addr);
> + if (s->map_addr) {
> + cpu_physical_log_start(s->map_addr, s->map_end - s->map_addr);
> + }
>
> - if (kvm_enabled() && s->lfb_vram_mapped) {
> - kvm_log_start(isa_mem_base + 0xa0000, 0x8000);
> - kvm_log_start(isa_mem_base + 0xa8000, 0x8000);
> + if (s->lfb_vram_mapped) {
> + cpu_physical_log_start(isa_mem_base + 0xa0000, 0x8000);
> + cpu_physical_log_start(isa_mem_base + 0xa8000, 0x8000);
> }
>
> #ifdef CONFIG_BOCHS_VBE
> - if (kvm_enabled() && s->vbe_mapped) {
> - kvm_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
> + if (s->vbe_mapped) {
> + cpu_physical_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
> }
> #endif
> }
>
> void vga_dirty_log_stop(VGACommonState *s)
> {
> - if (kvm_enabled() && s->map_addr)
> - kvm_log_stop(s->map_addr, s->map_end - s->map_addr);
> + if (s->map_addr) {
> + cpu_physical_log_stop(s->map_addr, s->map_end - s->map_addr);
> + }
>
> - if (kvm_enabled() && s->lfb_vram_mapped) {
> - kvm_log_stop(isa_mem_base + 0xa0000, 0x8000);
> - kvm_log_stop(isa_mem_base + 0xa8000, 0x8000);
> + if (s->lfb_vram_mapped) {
> + cpu_physical_log_stop(isa_mem_base + 0xa0000, 0x8000);
> + cpu_physical_log_stop(isa_mem_base + 0xa8000, 0x8000);
> }
>
> #ifdef CONFIG_BOCHS_VBE
> - if (kvm_enabled() && s->vbe_mapped) {
> - kvm_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
> + if (s->vbe_mapped) {
> + cpu_physical_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
> }
Sorry in case they were present earlier and I missed them, but here are
tabs included that should be removed from new code. There is a
check-patch script floating around on the list, I think it's not yet
merged though.
> #endif
> }
> diff --git a/hw/vhost.c b/hw/vhost.c
> index 8586f66..932b372 100644
> --- a/hw/vhost.c
> +++ b/hw/vhost.c
> @@ -606,6 +606,8 @@ int vhost_dev_init(struct vhost_dev *hdev, int devfd)
> hdev->client.set_memory = vhost_client_set_memory;
> hdev->client.sync_dirty_bitmap = vhost_client_sync_dirty_bitmap;
> hdev->client.migration_log = vhost_client_migration_log;
> + hdev->client.log_start = NULL;
> + hdev->client.log_stop = NULL;
> hdev->mem = qemu_mallocz(offsetof(struct vhost_memory, regions));
> hdev->log = NULL;
> hdev->log_size = 0;
> diff --git a/kvm-all.c b/kvm-all.c
> index 37b99c7..aedfe33 100644
> --- a/kvm-all.c
> +++ b/kvm-all.c
> @@ -267,14 +267,16 @@ static int
> kvm_dirty_pages_log_change(target_phys_addr_t phys_addr,
> return kvm_set_user_memory_region(s, mem);
> }
>
> -int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size)
> +static int kvm_log_start(CPUPhysMemoryClient *client,
> + target_phys_addr_t phys_addr, ram_addr_t size)
> {
> return kvm_dirty_pages_log_change(phys_addr, size,
> KVM_MEM_LOG_DIRTY_PAGES,
> KVM_MEM_LOG_DIRTY_PAGES);
> }
>
> -int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size)
> +static int kvm_log_stop(CPUPhysMemoryClient *client,
> + target_phys_addr_t phys_addr, ram_addr_t size)
> {
> return kvm_dirty_pages_log_change(phys_addr, size,
> 0,
> @@ -596,6 +598,8 @@ static CPUPhysMemoryClient kvm_cpu_phys_memory_client = {
> .set_memory = kvm_client_set_memory,
> .sync_dirty_bitmap = kvm_client_sync_dirty_bitmap,
> .migration_log = kvm_client_migration_log,
> + .log_start = kvm_log_start,
> + .log_stop = kvm_log_stop,
> };
>
> int kvm_init(int smp_cpus)
> diff --git a/kvm-stub.c b/kvm-stub.c
> index 5384a4b..41324e4 100644
> --- a/kvm-stub.c
> +++ b/kvm-stub.c
> @@ -33,16 +33,6 @@ int kvm_init_vcpu(CPUState *env)
> return -ENOSYS;
> }
>
> -int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size)
> -{
> - return -ENOSYS;
> -}
> -
> -int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size)
> -{
> - return -ENOSYS;
> -}
> -
> int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size)
> {
> return -ENOSYS;
> diff --git a/kvm.h b/kvm.h
> index 60a9b42..fc77b81 100644
> --- a/kvm.h
> +++ b/kvm.h
> @@ -49,9 +49,6 @@ int kvm_init_vcpu(CPUState *env);
> int kvm_cpu_exec(CPUState *env);
>
> #if !defined(CONFIG_USER_ONLY)
> -int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size);
> -int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size);
> -
> void kvm_setup_guest_memory(void *start, size_t size);
>
> int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size);
Besides the tabs, I'm fine with it:
Reviewed-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Maybe this patch should be picked up by qemu-kvm's upstream branch (it
will definitely collide with my coding style patch if not more, but
that's easily resolvable there).
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |