[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Re: [GIT/PATCH v3] xen network backend driver



On Tue, 2011-03-01 at 10:06 +0000, Ian Campbell wrote:
> On Mon, 2011-02-28 at 18:53 +0000, Ben Hutchings wrote:
> > On Mon, 2011-02-28 at 17:27 +0000, Ian Campbell wrote:
> 
> > This should be defined as unsigned long (ideally it would be u64, but
> > that can't be updated atomically on 32-bit systems).
> [...]
> > Don't update last_rx; it's only needed on slave devices of a bond, and
> > the bonding driver takes care of it now.
> 
> I made these two changes.
> 
> > [...]
> > > +static int xenvif_change_mtu(struct net_device *dev, int mtu)
> > > +{
> > > + struct xenvif *vif = netdev_priv(dev);
> > > + int max = vif->can_sg ? 65535 - ETH_HLEN : ETH_DATA_LEN;
> > > + if (mtu > max)
> > > +         return -EINVAL;
> > > + dev->mtu = mtu;
> > > + return 0;
> > > +}
> > [...]
> > 
> > Since any VLAN tag must be inserted inline, shouldn't the MTU limit be
> > 65535 - VLAN_ETH_HLEN?
> 
> In that case shouldn't the other case also be ETH_FRAME_LEN -
> VLAN_ETH_HLEN?
[...]

IEEE 802.3, in its infinite wisdom, says that the maximum frame length
is 1514, except that when an 802.1q tag is present it is 1518.  So the
MTU for standard Ethernet remains 1500, regardless of the use of VLANs.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.