Re: [Xen-devel] Re: [GIT PATCH v2 0/14] xen: events: cleanups + ween off nr_irqs

[Ian Campbell <Ian.Campbell@xxxxxxxxxx>]

On Fri, 2011-03-11 at 13:28 +0000, Ian Campbell wrote:
> On Fri, 2011-03-11 at 11:24 +0000, Ian Campbell wrote:
> > On Fri, 2011-03-11 at 09:12 +0000, Ian Campbell wrote:
> > > On Thu, 2011-03-10 at 22:57 +0000, Konrad Rzeszutek Wilk wrote:
> > > > On Thu, Mar 10, 2011 at 04:07:59PM +0000, Ian Campbell wrote:
> > > > > Changes since last time:
> > > > >       * correct return value of xen_irq_from_pirq
> > > > >       * WARN if a pirq cannot be allocated for a legacy IRQ
> > > > >       * Updated checking comment of "xen: events: do not workaround
> > > > >         too-small nr_irqs"
> > > > > 
> > > > > The following series makes a few cleanups to the Xen IRQ 
> > > > > infrastructure.
> > > > > The most important thing is that it removes the need to know about
> > > > > nr_irqs and in particular the reliance on nr_irqs being static.
> > > > > 
> > > > > Apart from being generally a good thing this is needed because in 
> > > > > 2.6.39
> > > > > nr_irqs will be able to grow dynamically, specifically e7bcecb7b1d2
> > > > > "genirq: Make nr_irqs runtime expandable" from tip/core/irq is 
> > > > > targeted
> > > > > at 2.6.39.
> > > > > 
> > > > > Dynamically growing nr_irqs also allows us to remove the workaround
> > > > > which eats into GSI space if a dynamic IRQ cannot be allocated.
> > > > > 
> > > > > There is no ideal sequencing of this series vs e7bcecb7b1d2 (most 
> > > > > should
> > > > > have gone in before, but the penultimate patch really needed to be
> > > > > simultaneous) so I haven't bothered to try and pull anything from tip
> > > > > into this branch -- it should all be resolved during the merge window
> > > > > and bisection won't be too broken since the "eat into GSI space"
> > > > > workaround only appears to be needed on a small number of older
> > > > > platforms (qemu being the main exception).
> > > > 
> > > > <nods>
> > > > > 
> > > > > I have tested:
> > > > >       * Domain 0 on real h/w and under qemu
> > > > >       * PV guest, including migration and passthrough of both VF and 
> > > > > PF.
> > > > >       * PVHVM guest, including migration and passthrough of both VF 
> > > > > and
> > > > >         PF.
> > > > 
> > > > I am having difficulties with passthrough of an USB device. Somehow the
> > > > irq count is not going up at all (both in dom0 and domU) and it looks to
> > > > be doing just simple polling. I've rebased the xen-pciback to be on top
> > > > of your changes and apply cleanly. The whole lot is now in #master
> > > > 
> > > > MSI and MSI-X devices work just fine in both Dom0 and DomU case so
> > > > it is something special with the legacy IRQs. Probably forgot something
> > > > simple...
> > > 
> > > Thanks, I'll take a look. Did you mean "legacy IRQ" as in <16 or as in
> > > not-MSI(-X)?
> > 
> > Works for me in a PV guest, at least under the second interpretation (I
> > don't have any useful devices IRQ < 16). This is with your pciback 0.5.
> > 
> > I see something like what you describe under HVM, although pciback is
> > not used in that case. xc_physdev_map_pirq is used but not with
> > the /sys/.../bdf node AFAICT.
> > 
> > More digging required I guess...
> 
> If I just pass through the EHCI device it doesn't work. However if I
> also pass-through the associated UHCI controller then I do see the
> usb-storage device, interrupts and all. The EHCI controller still
> doesn't work though. Note that with a PV guest passing-through the EHCI
> controller by itself does work.
> 
> The issue I'm seeing seems to have more to do with accessing the memory
> mapped BAR than IRQs though:

I seem to see this with 2.6.32 dom0 as well. This IRQ series of patches
doesn't appear to make a difference when running 2.6.38-rcX+.

Unfortunately I think the error must be elsewhere :-(

Ian.



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel