Re: [Xen-devel] pvops Domain 0 Creased when boot Xen-unstable on Ubuntu10.04

[Ian Campbell <Ian.Campbell@xxxxxxxxxxxxx>]

On Tue, 2011-05-17 at 16:48 +0100, Bei Guan wrote:
> 
> 
> 2011/5/17 Ian Campbell <Ian.Campbell@xxxxxxxxxx>
>         
>         On Tue, 2011-05-17 at 16:27 +0100, Bei Guan wrote:
>         >
>         >
>         > 2011/5/17 Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
>         >         > menuentry "Ubuntu_Xen 4.2 (2.6.32.28)" {
>         >         > recordfail
>         >         > insmod ext2
>         >         > set root='(hd0,9)'
>         >         > search --no-floppy --fs-uuid --set
>         >         59c64afa-47a8-4a5f-a4cf-dbe3be20cc15
>         >         >         multiboot /boot/xen.gz dom0_mem=1024M
>         loglvl=all
>         >         guest_loglvl=all
>         >         > sync_console console_to_ring com1=115200,8n1
>         console=com1
>         >         lapic=debug
>         >         > apic_verbosity=debug apic=debug iommu=off
>         >         > module /boot/vmlinuz-2.6.32.28 nopat
>         >         > root=UUID=59c64afa-47a8-4a5f-a4cf-dbe3be20cc15 ro
>         >         console=tty0
>         >         > console=ttyS0,115200n8 console=hvc0
>         earlyprintk=xen
>         >         nomodeset initcall_debug
>         >         > debug loglevel=10
>         >         > module /boot/initrd.img-2.6.32.28
>         >         > }
>         >         >
>         >         > In the debug, there is message like this:
>         >         >
>         >         > Loading, please wait...
>         >         > mount: mounting none on /dev failed: No such
>         device
>         >
>         >
>         >
>         >         So your /dev/sda is being seen. Not sure why the
>         UUID hasn't
>         >         been read, but
>         >         you could do 'root=/dev/sdaX' where X is the correct
>         root
>         >         partition.
>         >
>         >         This would replace the 'UUID=59...'.
>         >
>         > I just tried this. Because the /dev/sda9 is the root fs, so
>         I used
>         > 'root=/dev/sda9' to replace the original one. But it also
>         the same
>         > error as the following. Detailed is also attached.
>         >
>         >
>         > Loading, please wait...
>         > mount: mounting none on /dev failed: No such device
>         
>         
>         This is trying to mount something on /dev, presumably a TMPFS
>         or
>         DEVTMPFS or similar, this fails which apparently cascades into
>         not
>         finding the disk.
>         
>         I suggest you have a dig into your initramfs and try and
>         figure out what
>         specifically it is trying to do and what requirements your
>         distro has
>         put on the kernel configuration.
>         
>         You appear to be getting dumped into a debug shell within the
>         initramfs
>         so you can quite easily have a poke around and see what's
>         going on I
>         think.
> 
> 
> Sorry, can you give me more detail about how to do this? What command
> or what others? Many thanks.

It's a minimal Linux environment, you should have e.g. "ls" and "cat".
Try and find the mount command which is failing.

Ian.
> 
> 
>  
>         
>         Ian.
>         
>         
> 



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel