|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [xen-4.1-testing test] 7418: regressions - FAIL
flight 7418 xen-4.1-testing real [real] http://www.chiark.greenend.org.uk/~xensrcts/logs/7418/ Regressions :-( Tests which did not succeed and are blocking: test-amd64-i386-pair 16 guest-start fail REGR. vs. 7329 test-amd64-i386-pv 9 guest-start fail REGR. vs. 7329 test-amd64-i386-xl-multivcpu 9 guest-start fail REGR. vs. 7329 test-amd64-i386-xl 9 guest-start fail REGR. vs. 7329 test-i386-i386-pv 9 guest-start fail REGR. vs. 7329 test-i386-i386-xl 9 guest-start fail REGR. vs. 7329 Tests which are failing intermittently (not blocking): test-amd64-i386-xl-credit2 8 debian-fixup fail pass in 7405 Tests which did not succeed, but are not blocking, including regressions (tests previously passed) regarded as allowable: test-amd64-amd64-win 16 leak-check/check fail never pass test-amd64-amd64-xl-win 13 guest-stop fail never pass test-amd64-i386-rhel6hvm-amd 7 redhat-install fail like 7318 test-amd64-i386-rhel6hvm-intel 7 redhat-install fail like 7313 test-amd64-i386-win-vcpus1 16 leak-check/check fail never pass test-amd64-i386-win 16 leak-check/check fail never pass test-amd64-i386-xl-win-vcpus1 13 guest-stop fail never pass test-amd64-xcpkern-i386-rhel6hvm-amd 8 guest-saverestore fail never pass test-amd64-xcpkern-i386-rhel6hvm-intel 8 guest-saverestore fail never pass test-amd64-xcpkern-i386-win 16 leak-check/check fail never pass test-amd64-xcpkern-i386-xl-win 13 guest-stop fail never pass test-i386-i386-pair 16 guest-start fail like 7313 test-i386-i386-win 16 leak-check/check fail never pass test-i386-i386-xl-win 13 guest-stop fail never pass test-i386-xcpkern-i386-win 16 leak-check/check fail never pass version targeted for testing: xen dbe9e02a1f75 baseline version: xen 61336bbb0002 ------------------------------------------------------------ People who touched revisions under test: Ian Campbell <Ian.Campbell@xxxxxxxxxx> Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Jim Fehlig <jfehlig@xxxxxxxxxx> Keir Fraser <keir@xxxxxxx> Li, Xin <xin.li@xxxxxxxxx> Tim Deegan <Tim.Deegan@xxxxxxxxxx> Yang, Wei <wei.y.yang@xxxxxxxxx> ------------------------------------------------------------ jobs: build-i386-xcpkern pass build-amd64 pass build-i386 pass build-amd64-oldkern pass build-i386-oldkern pass build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl pass test-amd64-i386-xl fail test-i386-i386-xl fail test-amd64-xcpkern-i386-xl pass test-i386-xcpkern-i386-xl pass test-amd64-i386-rhel6hvm-amd fail test-amd64-xcpkern-i386-rhel6hvm-amd fail test-amd64-i386-xl-credit2 fail test-amd64-xcpkern-i386-xl-credit2 pass test-amd64-i386-rhel6hvm-intel fail test-amd64-xcpkern-i386-rhel6hvm-intel fail test-amd64-i386-xl-multivcpu fail test-amd64-xcpkern-i386-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair fail test-i386-i386-pair fail test-amd64-xcpkern-i386-pair pass test-i386-xcpkern-i386-pair pass test-amd64-amd64-pv pass test-amd64-i386-pv fail test-i386-i386-pv fail test-amd64-xcpkern-i386-pv pass test-i386-xcpkern-i386-pv pass test-amd64-i386-win-vcpus1 fail test-amd64-i386-xl-win-vcpus1 fail test-amd64-amd64-win fail test-amd64-i386-win fail test-i386-i386-win fail test-amd64-xcpkern-i386-win fail test-i386-xcpkern-i386-win fail test-amd64-amd64-xl-win fail test-i386-i386-xl-win fail test-amd64-xcpkern-i386-xl-win fail ------------------------------------------------------------ sg-report-flight on woking.cam.xci-test.com logs: /home/xc_osstest/logs images: /home/xc_osstest/images Logs, config files, etc. are available at http://www.chiark.greenend.org.uk/~xensrcts/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ changeset: 23069:dbe9e02a1f75 tag: tip user: Yang, Wei <wei.y.yang@xxxxxxxxx> date: Sat May 28 09:22:55 2011 +0100 x86/intel: Fix CPUID leaf 7 detection Must set subleaf to 0 (input ECX==0). Signed-off-by: Yang, Wei <wei.y.yang@xxxxxxxxx> Signed-off-by: Li, Xin <xin.li@xxxxxxxxx> xen-unstable changeset: 23436:f6ce871e5689 xen-unstable date: Sat May 28 08:57:12 2011 +0100 changeset: 23068:3f2f2543e943 user: Keir Fraser <keir@xxxxxxx> date: Sat May 28 09:17:15 2011 +0100 Clean up stdarg handling a little. Fix for NetBSD. Signed-off-by: Keir Fraser <keir@xxxxxxx> xen-unstable changeset: 23432:14eb8e1fcd82 xen-unstable date: Fri May 27 15:49:24 2011 +0100 changeset: 23067:f408456e30e8 user: Ian Campbell <ian.campbell@xxxxxxxxxx> date: Sat May 28 09:16:08 2011 +0100 IOMMU: Fail if intremap is not available and iommu=required/force. Rather than sprinkling panic()s throughout the setup code hoist the check up into common code. Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx> Signed-off-by: Keir Fraser <keir@xxxxxxx> Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> xen-unstable changeset: 23402:f979a1a69fe3 xen-unstable date: Thu May 26 08:18:44 2011 +0100 changeset: 23066:d0feff6ff44c user: Markus Gross <gross@xxxxxxxxxxxxx> date: Sat May 28 09:09:40 2011 +0100 libxc: obtain correct length of p2m during core dumping while implementing core dumping functionality for the libxl driver of libvirt, I discovered an issue with mapping pages of a pv guest. After dumping the core of a pv guest the domain was not cleared up properly and some pages were not unmapped. This issue is similar to the one reported here: http://lists.xensource.com/archives/html/xen-devel/2011-05/msg01314.html In xc_domain_dumpcore_via_callback in the file xc_core.c the function xc_core_arch_map_p2m is called to map P2M_FL_ENTRIES pages to the variable p2m. But to unmap the pages later, the dinfo->p2m_size has to be set accordingly. This was not done, instead a variable named p2m_size was set. This way P2M_FL_ENTRIES was always zero and the pages were left mapped. Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Committed-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> xen-unstable changeset: 23374:8bd7b5e98f2a xen-unstable date: Tue May 24 15:00:16 2011 +0100 changeset: 23065:41fcee15368a user: Jim Fehlig <jfehlig@xxxxxxxxxx> date: Sat May 28 09:08:21 2011 +0100 libxc: after saving, unmap correct amount for live_m2p With some help from Olaf, I've finally got to the bottom of an issue I came across while trying to implement save/restore in the libvirt libxenlight driver. After issuing the save operation, the saved domain was not being cleaned up properly and left in this state from xl's perspective xen33:# xl list Name ID Mem VCPUs State Time(s) Domain-0 0 6821 8 r----- 122.5 (null) 2 2 2 --pssd 10.8 Checking the libvirtd /proc/$pid/maps I found this 7f3798984000-7f3798b86000 r--s 00002000 00:03 4026532097 /proc/xen/privcmd So not all all pages belonging to the domain were unmapped from libvirtd. In tools/libxc/xc_domain_save.c we found that P2M_FL_ENTRIES were being mapped but only P2M_FLL_ENTRIES were being unmapped. The attached patch changes the unmapping to use the same P2M_FL_ENTRIES macro. I'm not too familiar with this code though so posting here for review. I suspect this was not noticed before since most (all?) processes doing save terminate after the save and are not long-running like libvirtd. Ian Campbell writes: > Looks like I introduced this in 18558:ccf0205255e1, sorry! > > I guess it is also wrong in the error path out of map_and_save_p2m_table > and so we also need [another hunk]. This change should be backported to relevant earlier trees. -iwj From: Jim Fehlig <jfehlig@xxxxxxxxxx> From: Ian Campbell <Ian.Campbell@xxxxxxxxxx> Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Cc: Olaf Hering <olaf@xxxxxxxxx> Acked-by: Ian Campbell <Ian.Campbell@xxxxxxxxxx> Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Committed-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> xen-unstable changeset: 23373:171007b4e2c4 xen-unstable date: Tue May 24 14:50:00 2011 +0100 changeset: 23064:61336bbb0002 user: Tim Deegan <Tim.Deegan@xxxxxxxxxx> date: Tue May 24 08:19:39 2011 +0100 drivers/passthrough: fix error paths in pci_add_device*() When a device can't be allocated to dom0 by the IOMMU, don't leave dom0 in the "domain" field. It causes pci_remove_device() to crash trying to remove the dev from the domain's list of devices (and was probably the wrong thing to do anyway). Signed-off-by: Tim Deegan <Tim.Deegan@xxxxxxxxxx> xen-unstable changeset: 23371:4326bcd88b33 xen-unstable date: Mon May 23 18:35:32 2011 +0100 drivers/passthrough: Revert 23352:ea48976517af -- incorrect bugfix. Signed-off-by: Keir Fraser <keir@xxxxxxx> xen-unstable changeset: 23370:2e6719425265 xen-unstable date: Mon May 23 18:35:04 2011 +0100 (qemu changes not included) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |