[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Re: Konrad devel/next-3.0, pci-passthrough not working: Error: pci: PCI Backend and pci-stub don't own device



Hello Konrad,

Tuesday, June 21, 2011, 4:13:55 PM, you wrote:

> On Tue, Jun 21, 2011 at 03:41:26PM +0200, Sander Eikelenboom wrote:
>> Hi Konrad,
>> 
>> I'm trying to use a kernel compiled from your devel/next-3.0 branch.

> Ok, good.
>> But trying to start a PV guest with pci-passthrough makes xen complain:
>> 
>> xm create /etc/xen/domU/production/security.cfg
>> Using config file "/etc/xen/domU/production/security.cfg".
>> Error: pci: PCI Backend and pci-stub don't own device 0000:04:00.0

> Most suprising. I wonder if there is some SysFS magic that Xend does not
> understand anymore. Can you try this with 'xl' please?

xl create /etc/xen/domU/production/security.cfg
Parsing config file /etc/xen/domU/production/security.cfg
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.0 is not 
assignable
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.1 is not 
assignable
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.2 is not 
assignable
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.3 is not 
assignable
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.4 is not 
assignable
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.5 is not 
assignable
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.6 is not 
assignable
libxl: error: libxl_pci.c:521:libxl_device_pci_list_assignable Looks like 
pciback driver not loaded
libxl: error: libxl_pci.c:794:libxl__device_pci_add PCI device 0:4:0.7 is not 
assignable
Daemon running with PID 15232


i will reboot and see if i see some clear differences in sysfs for these 
devices.



>> Although the device is in fact owned by xen-pciback:

> <nods>
>> 
>> 04:00.0 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 04:00.1 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 04:00.2 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 04:00.3 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 04:00.4 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 04:00.5 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 04:00.6 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 04:00.7 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 
>> Host Controller
>>         Subsystem: Device a000:4000
>>         Kernel driver in use: xen-pciback
>> 
>> 
>> With the kernels from Jeremy's tree (2.6.32.35) it works fine, using the 
>> exact same grub config lines with the 3.0 it doesn't.
>> All guests with pci-passthrough fail to start, all others start fine.
>> As hypervisor i'm running 4.1.1.
>> 
>> info attachted:
>> - xm info
>> - xm dmesg
>> - dmesg
>> - lspci
>> 
>> --
>> Sander

>> [    0.000000] Linux version 3.0.0-rc3-xen-konrad-devel-next-20110621+ 
>> (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Tue Jun 
>> 21 14:03:13 CEST 2011
>> [    0.000000] Command line: root=/dev/mapper/serveerstertje-root ro 
>> nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 
>> acpi_enforce_resources=lax 
>> xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2)
>>  pci=resource_alignment=07:01.0;07:01.1;07:01.2
>> [    0.000000] released 0 pages of unused memory
>> [    0.000000] 1-1 mapping on 9f->100
>> [    0.000000] 1-1 mapping on aff90->100000
>> [    0.000000] Set 327889 page(s) to 1-1 mapping.
>> [    0.000000] BIOS-provided physical RAM map:
>> [    0.000000]  Xen: 0000000000000000 - 000000000009f000 (usable)
>> [    0.000000]  Xen: 000000000009f000 - 0000000000100000 (reserved)
>> [    0.000000]  Xen: 0000000000100000 - 0000000030000000 (usable)
>> [    0.000000]  Xen: 0000000030000000 - 00000000aff90000 (unusable)
>> [    0.000000]  Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data)
>> [    0.000000]  Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS)
>> [    0.000000]  Xen: 00000000affe0000 - 00000000b0000000 (reserved)
>> [    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
>> [    0.000000]  Xen: 00000000fec20000 - 00000000fec21000 (reserved)
>> [    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
>> [    0.000000]  Xen: 00000000ffe00000 - 0000000100000000 (reserved)
>> [    0.000000]  Xen: 0000000100000000 - 00000002b0000000 (usable)
>> [    0.000000] bootconsole [xenboot0] enabled
>> [    0.000000] NX (Execute Disable) protection: active
>> [    0.000000] DMI present.
>> [    0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640)  , BIOS V1.8B1 
>> 09/13/2010
>> [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 
>> (usable) ==> (reserved)
>> [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 
>> (usable)
>> [    0.000000] No AGP bridge found
>> [    0.000000] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
>> [    0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
>> [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
>> [    0.000000] initial memory mapped : 0 - 027d7000
>> [    0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192
>> [    0.000000] init_memory_mapping: 0000000000000000-0000000030000000
>> [    0.000000]  0000000000 - 0030000000 page 4k
>> [    0.000000] kernel direct mapping tables up to 30000000 @ 
>> 2fe7e000-30000000
>> [    0.000000] xen: setting RW the range 2ffe4000 - 30000000
>> [    0.000000] init_memory_mapping: 0000000100000000-00000002b0000000
>> [    0.000000]  0100000000 - 02b0000000 page 4k
>> [    0.000000] kernel direct mapping tables up to 2b0000000 @ 
>> 2e8f2000-2fe7e000
>> [    0.000000] xen: setting RW the range 2f679000 - 2fe7e000
>> [    0.000000] RAMDISK: 01e0d000 - 027d7000
>> [    0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM)
>> [    0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI    OEMSLIC  
>> 20100913 MSFT 00000097)
>> [    0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 
>> 20100913 MSFT 00000097)
>> [    0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01  A7640 A7640100 
>> 00000100 INTL 20051117)
>> [    0.000000] ACPI: FACS 00000000aff9e000 00040
>> [    0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 
>> 20100913 MSFT 00000097)
>> [    0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG  
>> 20100913 MSFT 00000097)
>> [    0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI    OEMSLIC  
>> 20100913 MSFT 00000097)
>> [    0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 
>> 20100913 MSFT 00000097)
>> [    0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD    FAM_F_10 
>> 00000002 AMD  00000001)
>> [    0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET  
>> 20100913 MSFT 00000097)
>> [    0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01  AMD     RD890S 
>> 00202031 AMD  00000000)
>> [    0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I  POWERNOW 
>> 00000001 AMD  00000001)
>> [    0.000000] ACPI: Local APIC address 0xfee00000
>> [    0.000000] Zone PFN ranges:
>> [    0.000000]   DMA      0x00000010 -> 0x00001000
>> [    0.000000]   DMA32    0x00001000 -> 0x00100000
>> [    0.000000]   Normal   0x00100000 -> 0x002b0000
>> [    0.000000] Movable zone start PFN for each node
>> [    0.000000] early_node_map[3] active PFN ranges
>> [    0.000000]     0: 0x00000010 -> 0x0000009f
>> [    0.000000]     0: 0x00000100 -> 0x00030000
>> [    0.000000]     0: 0x00100000 -> 0x002b0000
>> [    0.000000] On node 0 totalpages: 1965967
>> [    0.000000]   DMA zone: 56 pages used for memmap
>> [    0.000000]   DMA zone: 2 pages reserved
>> [    0.000000]   DMA zone: 3925 pages, LIFO batch:0
>> [    0.000000]   DMA32 zone: 14280 pages used for memmap
>> [    0.000000]   DMA32 zone: 178232 pages, LIFO batch:31
>> [    0.000000]   Normal zone: 24192 pages used for memmap
>> [    0.000000]   Normal zone: 1745280 pages, LIFO batch:31
>> [    0.000000] ACPI: PM-Timer IO Port: 0x808
>> [    0.000000] ACPI: Local APIC address 0xfee00000
>> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> [    0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
>> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>> [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>> [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>> [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
>> [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>> [    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
>> [    0.000000] IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI 
>> 0-255
>> [    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
>> [    0.000000] IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI 
>> 24-279
>> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> [    0.000000] ACPI: IRQ0 used by override.
>> [    0.000000] ACPI: IRQ2 used by override.
>> [    0.000000] ACPI: IRQ9 used by override.
>> [    0.000000] Using ACPI (MADT) for SMP configuration information
>> [    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
>> [    0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
>> [    0.000000] nr_irqs_gsi: 296
>> [    0.000000] Allocating PCI resources starting at b0000000 (gap: 
>> b0000000:4ec00000)
>> [    0.000000] Booting paravirtualized kernel on Xen
>> [    0.000000] Xen version: 4.1.1 (preserve-AD)
>> [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 
>> nr_node_ids:1
>> [    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88002fdc6000 s76416 r8192 
>> d21888 u106496
>> [    0.000000] pcpu-alloc: s76416 r8192 d21888 u106496 alloc=26*4096
>> [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
>> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
>> pages: 1927437
>> [    0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro 
>> nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 
>> acpi_enforce_resources=lax 
>> xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2)
>>  pci=resource_alignment=07:01.0;07:01.1;07:01.2
>> [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> [    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 
>> bytes)
>> [    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 
>> bytes)
>> [    0.000000] Placing 64MB software IO TLB between ffff8800237f2000 - 
>> ffff8800277f2000
>> [    0.000000] software IO TLB at phys 0x237f2000 - 0x277f2000
>> [    0.000000] Memory: 559148k/11272192k available (7669k kernel code, 
>> 3408324k absent, 7304720k reserved, 3713k data, 812k init)
>> [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, 
>> CPUs=6, Nodes=1
>> [    0.000000] Hierarchical RCU implementation.
>> [    0.000000]        RCU debugfs-based tracing is enabled.
>> [    0.000000]        CONFIG_RCU_FANOUT set to non-default value of 32
>> [    0.000000] NR_IRQS:4352 nr_irqs:1536 16
>> [    0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
>> [    0.000000] xen: registering gsi 9 triggering 0 polarity 1
>> [    0.000000] xen: --> pirq=9 -> irq=9
>> [    0.000000] xen: acpi sci 9
>> [    0.000000] xen: --> pirq=1 -> irq=1
>> [    0.000000] xen: --> pirq=2 -> irq=2
>> [    0.000000] xen: --> pirq=3 -> irq=3
>> [    0.000000] xen: --> pirq=4 -> irq=4
>> [    0.000000] xen: --> pirq=5 -> irq=5
>> [    0.000000] xen: --> pirq=6 -> irq=6
>> [    0.000000] xen: --> pirq=7 -> irq=7
>> [    0.000000] xen: --> pirq=8 -> irq=8
>> [    0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
>> [    0.000000] xen: --> pirq=9 -> irq=9
>> [    0.000000] xen: --> pirq=10 -> irq=10
>> [    0.000000] xen: --> pirq=11 -> irq=11
>> [    0.000000] xen: --> pirq=12 -> irq=12
>> [    0.000000] xen: --> pirq=13 -> irq=13
>> [    0.000000] xen: --> pirq=14 -> irq=14
>> [    0.000000] xen: --> pirq=15 -> irq=15
>> [    0.000000] Console: colour dummy device 80x25
>> [    0.000000] console [tty0] enabled, bootconsole disabled
>> [    0.000000] Xen: using vcpuop timer interface
>> [    0.000000] installing Xen timer for CPU 0
>> [    0.000000] Detected 3200.184 MHz processor.
>> [    0.004000] Calibrating delay loop (skipped), value calculated using 
>> timer frequency.. 6400.36 BogoMIPS (lpj=12800736)
>> [    0.004000] pid_max: default: 32768 minimum: 301
>> [    0.004000] Security Framework initialized
>> [    0.004000] SELinux:  Initializing.
>> [    0.004000] SELinux:  Starting in permissive mode
>> [    0.004000] Mount-cache hash table entries: 256
>> [    0.004000] tseg: 0000000000
>> [    0.004000] CPU: Physical Processor ID: 0
>> [    0.004000] CPU: Processor Core ID: 0
>> [    0.004000] ACPI: Core revision 20110413
>> [    0.012014] ftrace: allocating 26057 entries in 103 pages
>> [    0.016072] cpu 0 spinlock event irq 297
>> [    0.016105] Performance Events: Broken PMU hardware detected, using 
>> software events only.
>> [    0.016304] MCE: In-kernel MCE decoding enabled.
>> [    0.016367] installing Xen timer for CPU 1
>> [    0.016384] cpu 1 spinlock event irq 303
>> [    0.016574] installing Xen timer for CPU 2
>> [    0.016584] cpu 2 spinlock event irq 309
>> [    0.016762] installing Xen timer for CPU 3
>> [    0.016771] cpu 3 spinlock event irq 315
>> [    0.016937] installing Xen timer for CPU 4
>> [    0.016946] cpu 4 spinlock event irq 321
>> [    0.017140] installing Xen timer for CPU 5
>> [    0.017151] cpu 5 spinlock event irq 327
>> [    0.017316] Brought up 6 CPUs
>> [    0.017386] Grant table initialized
>> [    0.017386] NET: Registered protocol family 16
>> [    0.017386] node 0 link 0: io port [1000, ffffff]
>> [    0.017386] TOM: 00000000b0000000 aka 2816M
>> [    0.017386] Fam 10h mmconf [e0000000, efffffff]
>> [    0.017386] node 0 link 0: mmio [e0000000, efffffff] ==> none
>> [    0.017386] node 0 link 0: mmio [f0000000, ffffffff]
>> [    0.017386] node 0 link 0: mmio [a0000, bffff]
>> [    0.017386] node 0 link 0: mmio [b0000000, dfffffff]
>> [    0.017386] TOM2: 0000000250000000 aka 9472M
>> [    0.017386] bus: [00, 07] on node 0 link 0
>> [    0.017386] bus: 00 index 0 [io  0x0000-0xffff]
>> [    0.017386] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
>> [    0.017386] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
>> [    0.017386] bus: 00 index 3 [mem 0xb0000000-0xdfffffff]
>> [    0.017386] bus: 00 index 4 [mem 0x250000000-0xfcffffffff]
>> [    0.017386] Extended Config Space enabled on 1 nodes
>> [    0.017386] ACPI: bus type pci registered
>> [    0.017386] sync cpu 0 get result 1 max_id 5
>> [    0.017386] sync cpu 1 get result 1 max_id 5
>> [    0.017386] sync cpu 2 get result 1 max_id 5
>> [    0.017386] sync cpu 3 get result 1 max_id 5
>> [    0.017386] sync cpu 4 get result 1 max_id 5
>> [    0.017386] sync cpu 5 get result 1 max_id 5
>> [    0.020032] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
>> 0xe0000000-0xefffffff] (base 0xe0000000)
>> [    0.020045] PCI: not using MMCONFIG
>> [    0.020048] PCI: Using configuration type 1 for base access
>> [    0.020050] PCI: Using configuration type 1 for extended access
>> [    0.036035] bio: create slab <bio-0> at 0
>> [    0.038934] ACPI: EC: Look up EC in DSDT
>> [    0.042573] ACPI: Executed 3 blocks of module-level executable AML code
>> [    0.060694] ACPI: Interpreter enabled
>> [    0.060698] ACPI: (supports S0 S5)
>> [    0.060708] ACPI: Using IOAPIC for interrupt routing
>> [    0.060752] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
>> 0xe0000000-0xefffffff] (base 0xe0000000)
>> [    0.062357] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI 
>> motherboard resources
>> [    0.228348] ACPI: No dock devices found.
>> [    0.228348] PCI: Using host bridge windows from ACPI; if necessary, use 
>> "pci=nocrs" and report a bug
>> [    0.228637] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [    0.228675] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>> [    0.228675] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>> [    0.228675] pci_root PNP0A03:00: host bridge window [mem 
>> 0x000a0000-0x000bffff]
>> [    0.228675] pci_root PNP0A03:00: host bridge window [mem 
>> 0x000d0000-0x000dffff]
>> [    0.228675] pci_root PNP0A03:00: host bridge window [mem 
>> 0xb0000000-0xdfffffff]
>> [    0.228675] pci_root PNP0A03:00: host bridge window [mem 
>> 0xf0000000-0xfebfffff]
>> [    0.228675] pci_bus 0000:00: scanning bus
>> [    0.228675] pci 0000:00:00.0: [1002:5a11] type 0 class 0x000600
>> [    0.228675] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.228675] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.228675] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.228675] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806
>> [    0.228675] pci 0000:00:00.2: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.228675] pci 0000:00:00.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.228675] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.228675] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
>> [    0.228675] pci 0000:00:02.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.228675] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.228675] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.228675] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>> [    0.228675] pci 0000:00:02.0: PME# disabled
>> [    0.228675] pci 0000:00:03.0: [1002:5a17] type 1 class 0x000604
>> [    0.228675] pci 0000:00:03.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.228675] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.228686] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.228709] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>> [    0.228713] pci 0000:00:03.0: PME# disabled
>> [    0.228739] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604
>> [    0.228741] pci 0000:00:05.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.228751] pci 0000:00:05.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.228787] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.228810] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>> [    0.228813] pci 0000:00:05.0: PME# disabled
>> [    0.228844] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
>> [    0.228847] pci 0000:00:06.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.228850] pci 0000:00:06.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.228886] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.228908] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>> [    0.228912] pci 0000:00:06.0: PME# disabled
>> [    0.228948] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
>> [    0.228950] pci 0000:00:0a.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.228953] pci 0000:00:0a.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.228989] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.229041] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>> [    0.229045] pci 0000:00:0a.0: PME# disabled
>> [    0.229069] pci 0000:00:0b.0: [1002:5a1f] type 1 class 0x000604
>> [    0.229072] pci 0000:00:0b.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.229074] pci 0000:00:0b.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.229117] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.229140] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
>> [    0.229144] pci 0000:00:0b.0: PME# disabled
>> [    0.229170] pci 0000:00:0d.0: [1002:5a1e] type 1 class 0x000604
>> [    0.229172] pci 0000:00:0d.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.229175] pci 0000:00:0d.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.229218] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.229241] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
>> [    0.229244] pci 0000:00:0d.0: PME# disabled
>> [    0.229287] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
>> [    0.229301] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.229303] pci 0000:00:11.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.229318] pci 0000:00:11.0: reg 10: [io  0x7000-0x7007]
>> [    0.229330] pci 0000:00:11.0: reg 14: [io  0x6000-0x6003]
>> [    0.229342] pci 0000:00:11.0: reg 18: [io  0x5000-0x5007]
>> [    0.229361] pci 0000:00:11.0: reg 1c: [io  0x3000-0x3003]
>> [    0.229372] pci 0000:00:11.0: reg 20: [io  0x2000-0x200f]
>> [    0.229384] pci 0000:00:11.0: reg 24: [mem 0xf98ff000-0xf98ff3ff]
>> [    0.229402] pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xc4
>> [    0.229412] pci 0000:00:11.0: set SATA to AHCI mode
>> [    0.229415] pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.229478] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
>> [    0.229482] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.229484] pci 0000:00:12.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.229499] pci 0000:00:12.0: reg 10: [mem 0xf98fb000-0xf98fbfff]
>> [    0.229565] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232041] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
>> [    0.232059] pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232061] pci 0000:00:12.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232076] pci 0000:00:12.2: reg 10: [mem 0xf98ff400-0xf98ff4ff]
>> [    0.232148] pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232174] pci 0000:00:12.2: supports D1 D2
>> [    0.232176] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>> [    0.232180] pci 0000:00:12.2: PME# disabled
>> [    0.232205] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
>> [    0.232208] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232211] pci 0000:00:13.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232233] pci 0000:00:13.0: reg 10: [mem 0xf98fc000-0xf98fcfff]
>> [    0.232297] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232328] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
>> [    0.232339] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232341] pci 0000:00:13.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232356] pci 0000:00:13.2: reg 10: [mem 0xf98ff800-0xf98ff8ff]
>> [    0.232428] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232453] pci 0000:00:13.2: supports D1 D2
>> [    0.232455] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>> [    0.232460] pci 0000:00:13.2: PME# disabled
>> [    0.232491] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
>> [    0.232495] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232497] pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232500] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x60
>> [    0.232584] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20
>> [    0.232586] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232602] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
>> [    0.232606] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232608] pci 0000:00:14.1: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232623] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
>> [    0.232635] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
>> [    0.232647] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>> [    0.232666] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>> [    0.232678] pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
>> [    0.232705] pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232722] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
>> [    0.232726] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232728] pci 0000:00:14.3: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232812] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232827] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
>> [    0.232866] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232868] pci 0000:00:14.4: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232903] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x16e
>> [    0.232918] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
>> [    0.232922] pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.232924] pci 0000:00:14.5: calling quirk_mmio_always_on+0x0/0x17
>> [    0.232939] pci 0000:00:14.5: reg 10: [mem 0xf98fd000-0xf98fdfff]
>> [    0.233010] pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233036] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
>> [    0.233039] pci 0000:00:15.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.233041] pci 0000:00:15.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233096] pci 0000:00:15.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233126] pci 0000:00:15.0: supports D1 D2
>> [    0.233160] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
>> [    0.233164] pci 0000:00:16.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.233167] pci 0000:00:16.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233189] pci 0000:00:16.0: reg 10: [mem 0xf98fe000-0xf98fefff]
>> [    0.233254] pci 0000:00:16.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233285] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
>> [    0.233295] pci 0000:00:16.2: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.233298] pci 0000:00:16.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233313] pci 0000:00:16.2: reg 10: [mem 0xf98ffc00-0xf98ffcff]
>> [    0.233384] pci 0000:00:16.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233410] pci 0000:00:16.2: supports D1 D2
>> [    0.233412] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
>> [    0.233416] pci 0000:00:16.2: PME# disabled
>> [    0.233449] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
>> [    0.233452] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233479] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233499] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
>> [    0.233502] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233536] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233546] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
>> [    0.233549] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233576] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233588] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
>> [    0.233591] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233625] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233644] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
>> [    0.233647] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233674] pci 0000:00:18.4: calling quirk_resource_alignment+0x0/0x16e
>> [    0.233692] pci_bus 0000:00: fixups for bus
>> [    0.233696] pci 0000:00:02.0: scanning [bus 0b-0b] behind bridge, pass 0
>> [    0.233748] pci_bus 0000:0b: scanning bus
>> [    0.233768] pci 0000:0b:00.0: [10de:06e4] type 0 class 0x000300
>> [    0.233771] pci 0000:0b:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.233785] pci 0000:0b:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
>> [    0.233809] pci 0000:0b:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit 
>> pref]
>> [    0.233825] pci 0000:0b:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
>> [    0.233836] pci 0000:0b:00.0: reg 24: [io  0xe800-0xe87f]
>> [    0.233848] pci 0000:0b:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
>> [    0.233853] pci 0000:0b:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.240043] pci_bus 0000:0b: fixups for bus
>> [    0.240047] pci 0000:00:02.0: PCI bridge to [bus 0b-0b]
>> [    0.240055] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>> [    0.240060] pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfe9fffff]
>> [    0.240066] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 
>> 64bit pref]
>> [    0.240068] pci_bus 0000:0b: bus scan returning with max=0b
>> [    0.240073] pci 0000:00:03.0: scanning [bus 0a-0a] behind bridge, pass 0
>> [    0.240126] pci_bus 0000:0a: scanning bus
>> [    0.240150] pci 0000:0a:00.0: [9710:9990] type 0 class 0x000c03
>> [    0.240156] pci 0000:0a:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.240182] pci 0000:0a:00.0: reg 10: [mem 0xf9ff8000-0xf9ff8fff]
>> [    0.240275] pci 0000:0a:00.0: calling quirk_netmos+0x0/0x98
>> [    0.240278] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.240323] pci 0000:0a:00.0: supports D1 D2
>> [    0.240325] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot
>> [    0.240330] pci 0000:0a:00.0: PME# disabled
>> [    0.240379] pci 0000:0a:00.1: [9710:9990] type 0 class 0x000c03
>> [    0.240383] pci 0000:0a:00.1: calling quirk_mmio_always_on+0x0/0x17
>> [    0.240402] pci 0000:0a:00.1: reg 10: [mem 0xf9ff9000-0xf9ff9fff]
>> [    0.240495] pci 0000:0a:00.1: calling quirk_netmos+0x0/0x98
>> [    0.240497] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x16e
>> [    0.240546] pci 0000:0a:00.1: supports D1 D2
>> [    0.240548] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot
>> [    0.240554] pci 0000:0a:00.1: PME# disabled
>> [    0.240594] pci 0000:0a:00.2: [9710:9990] type 0 class 0x000c03
>> [    0.240597] pci 0000:0a:00.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.240623] pci 0000:0a:00.2: reg 10: [mem 0xf9ffa000-0xf9ffafff]
>> [    0.240716] pci 0000:0a:00.2: calling quirk_netmos+0x0/0x98
>> [    0.240718] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.240760] pci 0000:0a:00.2: supports D1 D2
>> [    0.240762] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot
>> [    0.240768] pci 0000:0a:00.2: PME# disabled
>> [    0.240815] pci 0000:0a:00.3: [9710:9990] type 0 class 0x000c03
>> [    0.240819] pci 0000:0a:00.3: calling quirk_mmio_always_on+0x0/0x17
>> [    0.240838] pci 0000:0a:00.3: reg 10: [mem 0xf9ffb000-0xf9ffbfff]
>> [    0.240931] pci 0000:0a:00.3: calling quirk_netmos+0x0/0x98
>> [    0.240933] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x16e
>> [    0.240983] pci 0000:0a:00.3: supports D1 D2
>> [    0.240984] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot
>> [    0.240990] pci 0000:0a:00.3: PME# disabled
>> [    0.241030] pci 0000:0a:00.4: [9710:9990] type 0 class 0x000c03
>> [    0.241033] pci 0000:0a:00.4: calling quirk_mmio_always_on+0x0/0x17
>> [    0.241088] pci 0000:0a:00.4: reg 10: [mem 0xf9ffc000-0xf9ffcfff]
>> [    0.241173] pci 0000:0a:00.4: calling quirk_netmos+0x0/0x98
>> [    0.241175] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x16e
>> [    0.241224] pci 0000:0a:00.4: supports D1 D2
>> [    0.241226] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot
>> [    0.241232] pci 0000:0a:00.4: PME# disabled
>> [    0.241272] pci 0000:0a:00.5: [9710:9990] type 0 class 0x000c03
>> [    0.241276] pci 0000:0a:00.5: calling quirk_mmio_always_on+0x0/0x17
>> [    0.241295] pci 0000:0a:00.5: reg 10: [mem 0xf9ffd000-0xf9ffdfff]
>> [    0.241394] pci 0000:0a:00.5: calling quirk_netmos+0x0/0x98
>> [    0.241396] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x16e
>> [    0.241438] pci 0000:0a:00.5: supports D1 D2
>> [    0.241440] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot
>> [    0.241446] pci 0000:0a:00.5: PME# disabled
>> [    0.241493] pci 0000:0a:00.6: [9710:9990] type 0 class 0x000c03
>> [    0.241496] pci 0000:0a:00.6: calling quirk_mmio_always_on+0x0/0x17
>> [    0.241516] pci 0000:0a:00.6: reg 10: [mem 0xf9ffe000-0xf9ffefff]
>> [    0.241608] pci 0000:0a:00.6: calling quirk_netmos+0x0/0x98
>> [    0.241611] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x16e
>> [    0.241660] pci 0000:0a:00.6: supports D1 D2
>> [    0.241662] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot
>> [    0.241667] pci 0000:0a:00.6: PME# disabled
>> [    0.241710] pci 0000:0a:00.7: [9710:9990] type 0 class 0x000c03
>> [    0.241714] pci 0000:0a:00.7: calling quirk_mmio_always_on+0x0/0x17
>> [    0.241740] pci 0000:0a:00.7: reg 10: [mem 0xf9fff000-0xf9ffffff]
>> [    0.241835] pci 0000:0a:00.7: calling quirk_netmos+0x0/0x98
>> [    0.241838] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x16e
>> [    0.241880] pci 0000:0a:00.7: supports D1 D2
>> [    0.241881] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot
>> [    0.241887] pci 0000:0a:00.7: PME# disabled
>> [    0.248094] pci_bus 0000:0a: fixups for bus
>> [    0.248097] pci 0000:00:03.0: PCI bridge to [bus 0a-0a]
>> [    0.248106] pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] 
>> (disabled)
>> [    0.248110] pci 0000:00:03.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
>> [    0.248116] pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff 
>> pref] (disabled)
>> [    0.248118] pci_bus 0000:0a: bus scan returning with max=0a
>> [    0.248123] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 0
>> [    0.248176] pci_bus 0000:09: scanning bus
>> [    0.248196] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200
>> [    0.248201] pci 0000:09:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.248229] pci 0000:09:00.0: reg 10: [io  0xd800-0xd8ff]
>> [    0.248260] pci 0000:09:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit 
>> pref]
>> [    0.248280] pci 0000:09:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit 
>> pref]
>> [    0.248293] pci 0000:09:00.0: reg 30: [mem 0xf9ee0000-0xf9efffff pref]
>> [    0.248300] pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.248348] pci 0000:09:00.0: supports D1 D2
>> [    0.248350] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.248355] pci 0000:09:00.0: PME# disabled
>> [    0.256047] pci_bus 0000:09: fixups for bus
>> [    0.256050] pci 0000:00:05.0: PCI bridge to [bus 09-09]
>> [    0.256058] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
>> [    0.256062] pci 0000:00:05.0:   bridge window [mem 0xf9e00000-0xf9efffff]
>> [    0.256068] pci 0000:00:05.0:   bridge window [mem 0xcff00000-0xcfffffff 
>> 64bit pref]
>> [    0.256070] pci_bus 0000:09: bus scan returning with max=09
>> [    0.256075] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 0
>> [    0.256157] pci_bus 0000:08: scanning bus
>> [    0.256178] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
>> [    0.256183] pci 0000:08:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.256200] pci 0000:08:00.0: reg 10: [io  0xc800-0xc8ff]
>> [    0.256230] pci 0000:08:00.0: reg 18: [mem 0xcfeff000-0xcfefffff 64bit 
>> pref]
>> [    0.256250] pci 0000:08:00.0: reg 20: [mem 0xcfef8000-0xcfefbfff 64bit 
>> pref]
>> [    0.256270] pci 0000:08:00.0: reg 30: [mem 0xf9de0000-0xf9dfffff pref]
>> [    0.256277] pci 0000:08:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.256318] pci 0000:08:00.0: supports D1 D2
>> [    0.256320] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.256325] pci 0000:08:00.0: PME# disabled
>> [    0.264054] pci_bus 0000:08: fixups for bus
>> [    0.264057] pci 0000:00:06.0: PCI bridge to [bus 08-08]
>> [    0.264065] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
>> [    0.264069] pci 0000:00:06.0:   bridge window [mem 0xf9d00000-0xf9dfffff]
>> [    0.264075] pci 0000:00:06.0:   bridge window [mem 0xcfe00000-0xcfefffff 
>> 64bit pref]
>> [    0.264077] pci_bus 0000:08: bus scan returning with max=08
>> [    0.264081] pci 0000:00:0a.0: scanning [bus 06-07] behind bridge, pass 0
>> [    0.264134] pci_bus 0000:06: scanning bus
>> [    0.264161] pci 0000:06:00.0: [104c:8231] type 1 class 0x000604
>> [    0.264166] pci 0000:06:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.264234] pci 0000:06:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.264280] pci 0000:06:00.0: supports D1 D2
>> [    0.264340] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You 
>> can enable it with 'pcie_aspm=force'
>> [    0.264352] pci_bus 0000:06: fixups for bus
>> [    0.264354] pci 0000:00:0a.0: PCI bridge to [bus 06-07]
>> [    0.264360] pci 0000:00:0a.0:   bridge window [io  0xf000-0x0000] 
>> (disabled)
>> [    0.264364] pci 0000:00:0a.0:   bridge window [mem 0xf9c00000-0xf9cfffff]
>> [    0.264370] pci 0000:00:0a.0:   bridge window [mem 0xfff00000-0x000fffff 
>> pref] (disabled)
>> [    0.264374] pci 0000:06:00.0: scanning [bus 07-07] behind bridge, pass 0
>> [    0.264454] pci_bus 0000:07: scanning bus
>> [    0.264481] pci 0000:07:01.0: [1033:0035] type 0 class 0x000c03
>> [    0.264492] pci 0000:07:01.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.264513] pci 0000:07:01.0: reg 10: [mem 0xf9cfd000-0xf9cfdfff]
>> [    0.264613] pci 0000:07:01.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.264616] pci 0000:07:01.0: Disabling memory decoding and releasing 
>> memory resources.
>> [    0.264656] pci 0000:07:01.0: supports D1 D2
>> [    0.264658] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot
>> [    0.264664] pci 0000:07:01.0: PME# disabled
>> [    0.264690] pci 0000:07:01.1: [1033:0035] type 0 class 0x000c03
>> [    0.264700] pci 0000:07:01.1: calling quirk_mmio_always_on+0x0/0x17
>> [    0.264728] pci 0000:07:01.1: reg 10: [mem 0xf9cfe000-0xf9cfefff]
>> [    0.264829] pci 0000:07:01.1: calling quirk_resource_alignment+0x0/0x16e
>> [    0.264831] pci 0000:07:01.1: Disabling memory decoding and releasing 
>> memory resources.
>> [    0.264864] pci 0000:07:01.1: supports D1 D2
>> [    0.264866] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot
>> [    0.264872] pci 0000:07:01.1: PME# disabled
>> [    0.264905] pci 0000:07:01.2: [1033:00e0] type 0 class 0x000c03
>> [    0.264916] pci 0000:07:01.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.264937] pci 0000:07:01.2: reg 10: [mem 0xf9cffc00-0xf9cffcff]
>> [    0.265037] pci 0000:07:01.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.265040] pci 0000:07:01.2: Disabling memory decoding and releasing 
>> memory resources.
>> [    0.265048] pci 0000:07:01.2: Rounding up size of resource #0 to 0x1000.
>> [    0.265083] pci 0000:07:01.2: supports D1 D2
>> [    0.265085] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot
>> [    0.265091] pci 0000:07:01.2: PME# disabled
>> [    0.265182] pci_bus 0000:07: fixups for bus
>> [    0.265184] pci 0000:06:00.0: PCI bridge to [bus 07-07]
>> [    0.265194] pci 0000:06:00.0:   bridge window [io  0xf000-0x0000] 
>> (disabled)
>> [    0.265200] pci 0000:06:00.0:   bridge window [mem 0xf9c00000-0xf9cfffff]
>> [    0.265209] pci 0000:06:00.0:   bridge window [mem 0xfff00000-0x000fffff 
>> pref] (disabled)
>> [    0.265211] pci_bus 0000:07: bus scan returning with max=07
>> [    0.265217] pci 0000:06:00.0: scanning [bus 07-07] behind bridge, pass 1
>> [    0.265224] pci_bus 0000:06: bus scan returning with max=07
>> [    0.265228] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 0
>> [    0.265280] pci_bus 0000:05: scanning bus
>> [    0.265296] pci 0000:05:00.0: [1002:95c5] type 0 class 0x000300
>> [    0.265300] pci 0000:05:00.0: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.265302] pci 0000:05:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.265323] pci 0000:05:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit 
>> pref]
>> [    0.265348] pci 0000:05:00.0: reg 18: [mem 0xf9be0000-0xf9beffff 64bit]
>> [    0.265360] pci 0000:05:00.0: reg 20: [io  0xb000-0xb0ff]
>> [    0.265382] pci 0000:05:00.0: reg 30: [mem 0xf9bc0000-0xf9bdffff pref]
>> [    0.265388] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.265422] pci 0000:05:00.0: supports D1 D2
>> [    0.265452] pci 0000:05:00.1: [1002:aa28] type 0 class 0x000403
>> [    0.265457] pci 0000:05:00.1: calling quirk_no_ata_d3+0x0/0x1b
>> [    0.265460] pci 0000:05:00.1: calling quirk_mmio_always_on+0x0/0x17
>> [    0.265481] pci 0000:05:00.1: reg 10: [mem 0xf9bfc000-0xf9bfffff 64bit]
>> [    0.265544] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x16e
>> [    0.265571] pci 0000:05:00.1: supports D1 D2
>> [    0.272047] pci_bus 0000:05: fixups for bus
>> [    0.272050] pci 0000:00:0b.0: PCI bridge to [bus 05-05]
>> [    0.272059] pci 0000:00:0b.0:   bridge window [io  0xb000-0xbfff]
>> [    0.272063] pci 0000:00:0b.0:   bridge window [mem 0xf9b00000-0xf9bfffff]
>> [    0.272069] pci 0000:00:0b.0:   bridge window [mem 0xb0000000-0xbfffffff 
>> 64bit pref]
>> [    0.272071] pci_bus 0000:05: bus scan returning with max=05
>> [    0.272082] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 0
>> [    0.272128] pci_bus 0000:04: scanning bus
>> [    0.272152] pci 0000:04:00.0: [9710:9990] type 0 class 0x000c03
>> [    0.272157] pci 0000:04:00.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.272183] pci 0000:04:00.0: reg 10: [mem 0xf9af8000-0xf9af8fff]
>> [    0.272275] pci 0000:04:00.0: calling quirk_netmos+0x0/0x98
>> [    0.272277] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.272321] pci 0000:04:00.0: supports D1 D2
>> [    0.272323] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
>> [    0.272329] pci 0000:04:00.0: PME# disabled
>> [    0.272377] pci 0000:04:00.1: [9710:9990] type 0 class 0x000c03
>> [    0.272380] pci 0000:04:00.1: calling quirk_mmio_always_on+0x0/0x17
>> [    0.272399] pci 0000:04:00.1: reg 10: [mem 0xf9af9000-0xf9af9fff]
>> [    0.272489] pci 0000:04:00.1: calling quirk_netmos+0x0/0x98
>> [    0.272491] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x16e
>> [    0.272567] pci 0000:04:00.1: supports D1 D2
>> [    0.272569] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot
>> [    0.272575] pci 0000:04:00.1: PME# disabled
>> [    0.272614] pci 0000:04:00.2: [9710:9990] type 0 class 0x000c03
>> [    0.272617] pci 0000:04:00.2: calling quirk_mmio_always_on+0x0/0x17
>> [    0.272636] pci 0000:04:00.2: reg 10: [mem 0xf9afa000-0xf9afafff]
>> [    0.272726] pci 0000:04:00.2: calling quirk_netmos+0x0/0x98
>> [    0.272728] pci 0000:04:00.2: calling quirk_resource_alignment+0x0/0x16e
>> [    0.272777] pci 0000:04:00.2: supports D1 D2
>> [    0.272778] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot
>> [    0.272784] pci 0000:04:00.2: PME# disabled
>> [    0.272823] pci 0000:04:00.3: [9710:9990] type 0 class 0x000c03
>> [    0.272827] pci 0000:04:00.3: calling quirk_mmio_always_on+0x0/0x17
>> [    0.272845] pci 0000:04:00.3: reg 10: [mem 0xf9afb000-0xf9afbfff]
>> [    0.272936] pci 0000:04:00.3: calling quirk_netmos+0x0/0x98
>> [    0.272938] pci 0000:04:00.3: calling quirk_resource_alignment+0x0/0x16e
>> [    0.272986] pci 0000:04:00.3: supports D1 D2
>> [    0.272988] pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot
>> [    0.272994] pci 0000:04:00.3: PME# disabled
>> [    0.273040] pci 0000:04:00.4: [9710:9990] type 0 class 0x000c03
>> [    0.273043] pci 0000:04:00.4: calling quirk_mmio_always_on+0x0/0x17
>> [    0.273062] pci 0000:04:00.4: reg 10: [mem 0xf9afc000-0xf9afcfff]
>> [    0.273152] pci 0000:04:00.4: calling quirk_netmos+0x0/0x98
>> [    0.273155] pci 0000:04:00.4: calling quirk_resource_alignment+0x0/0x16e
>> [    0.273197] pci 0000:04:00.4: supports D1 D2
>> [    0.273199] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot
>> [    0.273211] pci 0000:04:00.4: PME# disabled
>> [    0.273256] pci 0000:04:00.5: [9710:9990] type 0 class 0x000c03
>> [    0.273260] pci 0000:04:00.5: calling quirk_mmio_always_on+0x0/0x17
>> [    0.273278] pci 0000:04:00.5: reg 10: [mem 0xf9afd000-0xf9afdfff]
>> [    0.273369] pci 0000:04:00.5: calling quirk_netmos+0x0/0x98
>> [    0.273371] pci 0000:04:00.5: calling quirk_resource_alignment+0x0/0x16e
>> [    0.273420] pci 0000:04:00.5: supports D1 D2
>> [    0.273421] pci 0000:04:00.5: PME# supported from D0 D1 D2 D3hot
>> [    0.273427] pci 0000:04:00.5: PME# disabled
>> [    0.273473] pci 0000:04:00.6: [9710:9990] type 0 class 0x000c03
>> [    0.273477] pci 0000:04:00.6: calling quirk_mmio_always_on+0x0/0x17
>> [    0.273496] pci 0000:04:00.6: reg 10: [mem 0xf9afe000-0xf9afefff]
>> [    0.273586] pci 0000:04:00.6: calling quirk_netmos+0x0/0x98
>> [    0.273589] pci 0000:04:00.6: calling quirk_resource_alignment+0x0/0x16e
>> [    0.273630] pci 0000:04:00.6: supports D1 D2
>> [    0.273632] pci 0000:04:00.6: PME# supported from D0 D1 D2 D3hot
>> [    0.273644] pci 0000:04:00.6: PME# disabled
>> [    0.273686] pci 0000:04:00.7: [9710:9990] type 0 class 0x000c03
>> [    0.273690] pci 0000:04:00.7: calling quirk_mmio_always_on+0x0/0x17
>> [    0.273709] pci 0000:04:00.7: reg 10: [mem 0xf9aff000-0xf9afffff]
>> [    0.273800] pci 0000:04:00.7: calling quirk_netmos+0x0/0x98
>> [    0.273803] pci 0000:04:00.7: calling quirk_resource_alignment+0x0/0x16e
>> [    0.273851] pci 0000:04:00.7: supports D1 D2
>> [    0.273853] pci 0000:04:00.7: PME# supported from D0 D1 D2 D3hot
>> [    0.273859] pci 0000:04:00.7: PME# disabled
>> [    0.280095] pci_bus 0000:04: fixups for bus
>> [    0.280098] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
>> [    0.280106] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] 
>> (disabled)
>> [    0.280110] pci 0000:00:0d.0:   bridge window [mem 0xf9a00000-0xf9afffff]
>> [    0.280123] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff 
>> pref] (disabled)
>> [    0.280125] pci_bus 0000:04: bus scan returning with max=04
>> [    0.280131] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0
>> [    0.280143] pci_bus 0000:03: scanning bus
>> [    0.280171] pci 0000:03:06.0: [13f6:0111] type 0 class 0x000401
>> [    0.280182] pci 0000:03:06.0: calling quirk_mmio_always_on+0x0/0x17
>> [    0.280201] pci 0000:03:06.0: reg 10: [io  0xa800-0xa8ff]
>> [    0.280300] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x16e
>> [    0.280327] pci 0000:03:06.0: supports D1 D2
>> [    0.280387] pci_bus 0000:03: fixups for bus
>> [    0.280389] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive 
>> decode)
>> [    0.280395] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
>> [    0.280400] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] 
>> (disabled)
>> [    0.280405] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff 
>> pref] (disabled)
>> [    0.280408] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] 
>> (subtractive decode)
>> [    0.280410] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] 
>> (subtractive decode)
>> [    0.280412] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] 
>> (subtractive decode)
>> [    0.280414] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] 
>> (subtractive decode)
>> [    0.280416] pci 0000:00:14.4:   bridge window [mem 0xb0000000-0xdfffffff] 
>> (subtractive decode)
>> [    0.280418] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] 
>> (subtractive decode)
>> [    0.280420] pci_bus 0000:03: bus scan returning with max=03
>> [    0.280425] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 0
>> [    0.280491] pci_bus 0000:02: scanning bus
>> [    0.280494] pci_bus 0000:02: fixups for bus
>> [    0.280496] pci 0000:00:15.0: PCI bridge to [bus 02-02]
>> [    0.280504] pci 0000:00:15.0:   bridge window [io  0xf000-0x0000] 
>> (disabled)
>> [    0.280509] pci 0000:00:15.0:   bridge window [mem 0xfff00000-0x000fffff] 
>> (disabled)
>> [    0.280516] pci 0000:00:15.0:   bridge window [mem 0xfff00000-0x000fffff 
>> pref] (disabled)
>> [    0.280518] pci_bus 0000:02: bus scan returning with max=02
>> [    0.280523] pci 0000:00:02.0: scanning [bus 0b-0b] behind bridge, pass 1
>> [    0.280528] pci 0000:00:03.0: scanning [bus 0a-0a] behind bridge, pass 1
>> [    0.280534] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 1
>> [    0.280540] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 1
>> [    0.280546] pci 0000:00:0a.0: scanning [bus 06-07] behind bridge, pass 1
>> [    0.280558] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 1
>> [    0.280564] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 1
>> [    0.280570] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1
>> [    0.280578] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 1
>> [    0.280584] pci_bus 0000:00: bus scan returning with max=0b
>> [    0.280585] pci_bus 0000:00: on NUMA node 0
>> [    0.280590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> [    0.280671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
>> [    0.280695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT]
>> [    0.280719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
>> [    0.280776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
>> [    0.280802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
>> [    0.280823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT]
>> [    0.280848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT]
>> [    0.280879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>> [    0.280937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
>> [    0.281076]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>> [    0.281259]  pci0000:00: ACPI _OSC control (0x1d) granted
>> [    0.296074] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
>> [    0.296161] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
>> [    0.296260] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
>> [    0.296349] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
>> [    0.296419] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15)
>> [    0.296466] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
>> [    0.296521] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
>> [    0.296578] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15)
>> [    0.296610] xen/balloon: Initialising balloon driver.
>> [    0.296610] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
>> [    0.321839] xen-balloon: Initialising balloon driver.
>> [    0.321839] vgaarb: device added: 
>> PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
>> [    0.321839] vgaarb: device added: 
>> PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
>> [    0.321839] vgaarb: loaded
>> [    0.321839] vgaarb: bridge control possible 0000:05:00.0
>> [    0.321839] vgaarb: bridge control possible 0000:0b:00.0
>> [    0.321839] SCSI subsystem initialized
>> [    0.321839] libata version 3.00 loaded.
>> [    0.321839] usbcore: registered new interface driver usbfs
>> [    0.321839] usbcore: registered new interface driver hub
>> [    0.321839] usbcore: registered new device driver usb
>> [    0.321839] Advanced Linux Sound Architecture Driver Version 1.0.24.
>> [    0.321839] PCI: Using ACPI for IRQ routing
>> [    0.324019] PCI: pci_cache_line_size set to 64 bytes
>> [    0.324019] pci 0000:00:11.0: BAR 0: reserving [io  0x7000-0x7007 flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:00:11.0: BAR 1: reserving [io  0x6000-0x6003 flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:00:11.0: BAR 2: reserving [io  0x5000-0x5007 flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:00:11.0: BAR 3: reserving [io  0x3000-0x3003 flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:00:11.0: BAR 4: reserving [io  0x2000-0x200f flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:00:11.0: BAR 5: reserving [mem 0xf98ff000-0xf98ff3ff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:00:12.0: BAR 0: reserving [mem 0xf98fb000-0xf98fbfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:00:12.2: BAR 0: reserving [mem 0xf98ff400-0xf98ff4ff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:00:13.0: BAR 0: reserving [mem 0xf98fc000-0xf98fcfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:00:13.2: BAR 0: reserving [mem 0xf98ff800-0xf98ff8ff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:00:14.1: BAR 0: reserving [io  0x01f0-0x01f7 flags 
>> 0x110] (d=0, p=0)
>> [    0.324019] pci 0000:00:14.1: BAR 1: reserving [io  0x03f6 flags 0x110] 
>> (d=0, p=0)
>> [    0.324019] pci 0000:00:14.1: BAR 2: reserving [io  0x0170-0x0177 flags 
>> 0x110] (d=0, p=0)
>> [    0.324019] pci 0000:00:14.1: BAR 3: reserving [io  0x0376 flags 0x110] 
>> (d=0, p=0)
>> [    0.324019] pci 0000:00:14.1: BAR 4: reserving [io  0xff00-0xff0f flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:00:14.5: BAR 0: reserving [mem 0xf98fd000-0xf98fdfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:00:16.0: BAR 0: reserving [mem 0xf98fe000-0xf98fefff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:00:16.2: BAR 0: reserving [mem 0xf98ffc00-0xf98ffcff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0b:00.0: BAR 0: reserving [mem 0xfd000000-0xfdffffff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0b:00.0: BAR 1: reserving [mem 0xd0000000-0xdfffffff 
>> flags 0x14220c] (d=0, p=0)
>> [    0.324019] pci 0000:0b:00.0: BAR 3: reserving [mem 0xfa000000-0xfbffffff 
>> flags 0x140204] (d=0, p=0)
>> [    0.324019] pci 0000:0b:00.0: BAR 5: reserving [io  0xe800-0xe87f flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.0: BAR 0: reserving [mem 0xf9ff8000-0xf9ff8fff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.1: BAR 0: reserving [mem 0xf9ff9000-0xf9ff9fff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.2: BAR 0: reserving [mem 0xf9ffa000-0xf9ffafff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.3: BAR 0: reserving [mem 0xf9ffb000-0xf9ffbfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.4: BAR 0: reserving [mem 0xf9ffc000-0xf9ffcfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.5: BAR 0: reserving [mem 0xf9ffd000-0xf9ffdfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.6: BAR 0: reserving [mem 0xf9ffe000-0xf9ffefff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:0a:00.7: BAR 0: reserving [mem 0xf9fff000-0xf9ffffff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:09:00.0: BAR 0: reserving [io  0xd800-0xd8ff flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:09:00.0: BAR 2: reserving [mem 0xcffff000-0xcfffffff 
>> flags 0x14220c] (d=0, p=0)
>> [    0.324019] pci 0000:09:00.0: BAR 4: reserving [mem 0xcfff8000-0xcfffbfff 
>> flags 0x14220c] (d=0, p=0)
>> [    0.324019] pci 0000:08:00.0: BAR 0: reserving [io  0xc800-0xc8ff flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:08:00.0: BAR 2: reserving [mem 0xcfeff000-0xcfefffff 
>> flags 0x14220c] (d=0, p=0)
>> [    0.324019] pci 0000:08:00.0: BAR 4: reserving [mem 0xcfef8000-0xcfefbfff 
>> flags 0x14220c] (d=0, p=0)
>> [    0.324019] pci 0000:05:00.1: BAR 0: reserving [mem 0xf9bfc000-0xf9bfffff 
>> flags 0x140204] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.0: BAR 0: reserving [mem 0xf9af8000-0xf9af8fff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.1: BAR 0: reserving [mem 0xf9af9000-0xf9af9fff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.2: BAR 0: reserving [mem 0xf9afa000-0xf9afafff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.3: BAR 0: reserving [mem 0xf9afb000-0xf9afbfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.4: BAR 0: reserving [mem 0xf9afc000-0xf9afcfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.5: BAR 0: reserving [mem 0xf9afd000-0xf9afdfff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.6: BAR 0: reserving [mem 0xf9afe000-0xf9afefff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:04:00.7: BAR 0: reserving [mem 0xf9aff000-0xf9afffff 
>> flags 0x40200] (d=0, p=0)
>> [    0.324019] pci 0000:03:06.0: BAR 0: reserving [io  0xa800-0xa8ff flags 
>> 0x40101] (d=0, p=0)
>> [    0.324019] pci 0000:05:00.0: BAR 0: reserving [mem 0xb0000000-0xbfffffff 
>> flags 0x14220c] (d=1, p=1)
>> [    0.324019] pci 0000:05:00.0: BAR 2: reserving [mem 0xf9be0000-0xf9beffff 
>> flags 0x140204] (d=1, p=1)
>> [    0.324019] pci 0000:05:00.0: BAR 4: reserving [io  0xb000-0xb0ff flags 
>> 0x40101] (d=1, p=1)
>> [    0.324049] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
>> [    0.324075] NetLabel: Initializing
>> [    0.324075] NetLabel:  domain hash size = 128
>> [    0.324075] NetLabel:  protocols = UNLABELED CIPSOv4
>> [    0.324075] NetLabel:  unlabeled traffic allowed by default
>> [    0.324144] Switching to clocksource xen
>> [    0.324184] Switched to NOHz mode on CPU #5
>> [    0.327787] Switched to NOHz mode on CPU #0
>> [    0.328877] xen-pciback: wants to seize 0000:03:06.0
>> [    0.328880] xen-pciback: wants to seize 0000:04:00.0
>> [    0.328883] xen-pciback: wants to seize 0000:04:00.1
>> [    0.328885] xen-pciback: wants to seize 0000:04:00.2
>> [    0.328887] xen-pciback: wants to seize 0000:04:00.3
>> [    0.328889] xen-pciback: wants to seize 0000:04:00.4
>> [    0.328891] xen-pciback: wants to seize 0000:04:00.5
>> [    0.328893] xen-pciback: wants to seize 0000:04:00.6
>> [    0.328895] xen-pciback: wants to seize 0000:04:00.7
>> [    0.328897] xen-pciback: wants to seize 0000:0a:00.0
>> [    0.328899] xen-pciback: wants to seize 0000:0a:00.1
>> [    0.328901] xen-pciback: wants to seize 0000:0a:00.2
>> [    0.328903] xen-pciback: wants to seize 0000:0a:00.3
>> [    0.328905] xen-pciback: wants to seize 0000:0a:00.4
>> [    0.328907] xen-pciback: wants to seize 0000:0a:00.5
>> [    0.328909] xen-pciback: wants to seize 0000:0a:00.6
>> [    0.328911] xen-pciback: wants to seize 0000:0a:00.7
>> [    0.328913] xen-pciback: wants to seize 0000:05:00.0
>> [    0.328915] xen-pciback: wants to seize 0000:05:00.1
>> [    0.328917] xen-pciback: wants to seize 0000:07:01.0
>> [    0.328919] xen-pciback: wants to seize 0000:07:01.1
>> [    0.328921] xen-pciback: wants to seize 0000:07:01.2
>> [    0.328935] xen-pciback 0000:00:00.0: probing...
>> [    0.328942] xen-pciback 0000:00:00.2: probing...
>> [    0.328955] xen-pciback 0000:00:02.0: probing...
>> [    0.328961] xen-pciback 0000:00:03.0: probing...
>> [    0.328966] xen-pciback 0000:00:05.0: probing...
>> [    0.328971] xen-pciback 0000:00:06.0: probing...
>> [    0.328976] xen-pciback 0000:00:0a.0: probing...
>> [    0.328981] xen-pciback 0000:00:0b.0: probing...
>> [    0.328987] xen-pciback 0000:00:0d.0: probing...
>> [    0.328992] xen-pciback 0000:00:11.0: probing...
>> [    0.328997] xen-pciback 0000:00:12.0: probing...
>> [    0.329001] xen-pciback 0000:00:12.2: probing...
>> [    0.329006] xen-pciback 0000:00:13.0: probing...
>> [    0.329011] xen-pciback 0000:00:13.2: probing...
>> [    0.329016] xen-pciback 0000:00:14.0: probing...
>> [    0.329020] xen-pciback 0000:00:14.1: probing...
>> [    0.329025] xen-pciback 0000:00:14.3: probing...
>> [    0.329030] xen-pciback 0000:00:14.4: probing...
>> [    0.329042] xen-pciback 0000:00:14.5: probing...
>> [    0.329047] xen-pciback 0000:00:15.0: probing...
>> [    0.329052] xen-pciback 0000:00:16.0: probing...
>> [    0.329056] xen-pciback 0000:00:16.2: probing...
>> [    0.329061] xen-pciback 0000:00:18.0: probing...
>> [    0.329066] xen-pciback 0000:00:18.1: probing...
>> [    0.329070] xen-pciback 0000:00:18.2: probing...
>> [    0.329075] xen-pciback 0000:00:18.3: probing...
>> [    0.329080] xen-pciback 0000:00:18.4: probing...
>> [    0.329084] xen-pciback 0000:0b:00.0: probing...
>> [    0.329088] xen-pciback 0000:0a:00.0: probing...
>> [    0.329090] xen-pciback 0000:0a:00.0: seizing device
>> [    0.329094] xen-pciback 0000:0a:00.0: pcistub_device_alloc
>> [    0.329096] xen-pciback 0000:0a:00.0: deferring initialization
>> [    0.329100] xen-pciback 0000:0a:00.1: probing...
>> [    0.329102] xen-pciback 0000:0a:00.1: seizing device
>> [    0.329104] xen-pciback 0000:0a:00.1: pcistub_device_alloc
>> [    0.329106] xen-pciback 0000:0a:00.1: deferring initialization
>> [    0.329110] xen-pciback 0000:0a:00.2: probing...
>> [    0.329112] xen-pciback 0000:0a:00.2: seizing device
>> [    0.329114] xen-pciback 0000:0a:00.2: pcistub_device_alloc
>> [    0.329116] xen-pciback 0000:0a:00.2: deferring initialization
>> [    0.329155] xen-pciback 0000:0a:00.3: probing...
>> [    0.329157] xen-pciback 0000:0a:00.3: seizing device
>> [    0.329160] xen-pciback 0000:0a:00.3: pcistub_device_alloc
>> [    0.329161] xen-pciback 0000:0a:00.3: deferring initialization
>> [    0.329165] xen-pciback 0000:0a:00.4: probing...
>> [    0.329167] xen-pciback 0000:0a:00.4: seizing device
>> [    0.329170] xen-pciback 0000:0a:00.4: pcistub_device_alloc
>> [    0.329171] xen-pciback 0000:0a:00.4: deferring initialization
>> [    0.329175] xen-pciback 0000:0a:00.5: probing...
>> [    0.329177] xen-pciback 0000:0a:00.5: seizing device
>> [    0.329180] xen-pciback 0000:0a:00.5: pcistub_device_alloc
>> [    0.329183] xen-pciback 0000:0a:00.5: deferring initialization
>> [    0.329188] xen-pciback 0000:0a:00.6: probing...
>> [    0.329189] xen-pciback 0000:0a:00.6: seizing device
>> [    0.329192] xen-pciback 0000:0a:00.6: pcistub_device_alloc
>> [    0.329194] xen-pciback 0000:0a:00.6: deferring initialization
>> [    0.329198] xen-pciback 0000:0a:00.7: probing...
>> [    0.329200] xen-pciback 0000:0a:00.7: seizing device
>> [    0.329203] xen-pciback 0000:0a:00.7: pcistub_device_alloc
>> [    0.329204] xen-pciback 0000:0a:00.7: deferring initialization
>> [    0.329208] xen-pciback 0000:09:00.0: probing...
>> [    0.329213] xen-pciback 0000:08:00.0: probing...
>> [    0.329219] xen-pciback 0000:06:00.0: probing...
>> [    0.329223] xen-pciback 0000:07:01.0: probing...
>> [    0.329225] xen-pciback 0000:07:01.0: seizing device
>> [    0.329228] xen-pciback 0000:07:01.0: pcistub_device_alloc
>> [    0.329230] xen-pciback 0000:07:01.0: deferring initialization
>> [    0.329234] xen-pciback 0000:07:01.1: probing...
>> [    0.329236] xen-pciback 0000:07:01.1: seizing device
>> [    0.329238] xen-pciback 0000:07:01.1: pcistub_device_alloc
>> [    0.329240] xen-pciback 0000:07:01.1: deferring initialization
>> [    0.329244] xen-pciback 0000:07:01.2: probing...
>> [    0.329246] xen-pciback 0000:07:01.2: seizing device
>> [    0.329248] xen-pciback 0000:07:01.2: pcistub_device_alloc
>> [    0.329250] xen-pciback 0000:07:01.2: deferring initialization
>> [    0.329254] xen-pciback 0000:05:00.0: probing...
>> [    0.329256] xen-pciback 0000:05:00.0: seizing device
>> [    0.329258] xen-pciback 0000:05:00.0: pcistub_device_alloc
>> [    0.329260] xen-pciback 0000:05:00.0: deferring initialization
>> [    0.329264] xen-pciback 0000:05:00.1: probing...
>> [    0.329266] xen-pciback 0000:05:00.1: seizing device
>> [    0.329268] xen-pciback 0000:05:00.1: pcistub_device_alloc
>> [    0.329270] xen-pciback 0000:05:00.1: deferring initialization
>> [    0.329274] xen-pciback 0000:04:00.0: probing...
>> [    0.329276] xen-pciback 0000:04:00.0: seizing device
>> [    0.329279] xen-pciback 0000:04:00.0: pcistub_device_alloc
>> [    0.329281] xen-pciback 0000:04:00.0: deferring initialization
>> [    0.329284] xen-pciback 0000:04:00.1: probing...
>> [    0.329286] xen-pciback 0000:04:00.1: seizing device
>> [    0.329289] xen-pciback 0000:04:00.1: pcistub_device_alloc
>> [    0.329290] xen-pciback 0000:04:00.1: deferring initialization
>> [    0.329301] xen-pciback 0000:04:00.2: probing...
>> [    0.329303] xen-pciback 0000:04:00.2: seizing device
>> [    0.329306] xen-pciback 0000:04:00.2: pcistub_device_alloc
>> [    0.329307] xen-pciback 0000:04:00.2: deferring initialization
>> [    0.329312] xen-pciback 0000:04:00.3: probing...
>> [    0.329313] xen-pciback 0000:04:00.3: seizing device
>> [    0.329316] xen-pciback 0000:04:00.3: pcistub_device_alloc
>> [    0.329318] xen-pciback 0000:04:00.3: deferring initialization
>> [    0.329322] xen-pciback 0000:04:00.4: probing...
>> [    0.329324] xen-pciback 0000:04:00.4: seizing device
>> [    0.329326] xen-pciback 0000:04:00.4: pcistub_device_alloc
>> [    0.329328] xen-pciback 0000:04:00.4: deferring initialization
>> [    0.329334] xen-pciback 0000:04:00.5: probing...
>> [    0.329336] xen-pciback 0000:04:00.5: seizing device
>> [    0.329338] xen-pciback 0000:04:00.5: pcistub_device_alloc
>> [    0.329340] xen-pciback 0000:04:00.5: deferring initialization
>> [    0.329344] xen-pciback 0000:04:00.6: probing...
>> [    0.329346] xen-pciback 0000:04:00.6: seizing device
>> [    0.329349] xen-pciback 0000:04:00.6: pcistub_device_alloc
>> [    0.329350] xen-pciback 0000:04:00.6: deferring initialization
>> [    0.329354] xen-pciback 0000:04:00.7: probing...
>> [    0.329356] xen-pciback 0000:04:00.7: seizing device
>> [    0.329359] xen-pciback 0000:04:00.7: pcistub_device_alloc
>> [    0.329361] xen-pciback 0000:04:00.7: deferring initialization
>> [    0.329365] xen-pciback 0000:03:06.0: probing...
>> [    0.329367] xen-pciback 0000:03:06.0: seizing device
>> [    0.329369] xen-pciback 0000:03:06.0: pcistub_device_alloc
>> [    0.329371] xen-pciback 0000:03:06.0: deferring initialization
>> [    0.329540] pnp: PnP ACPI init
>> [    0.329550] ACPI: bus type pnp registered
>> [    0.329699] pnp 00:00: [bus 00-ff]
>> [    0.329701] pnp 00:00: [io  0x0cf8-0x0cff]
>> [    0.329704] pnp 00:00: [io  0x0000-0x0cf7 window]
>> [    0.329705] pnp 00:00: [io  0x0d00-0xffff window]
>> [    0.329707] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>> [    0.329709] pnp 00:00: [mem 0x000d0000-0x000dffff window]
>> [    0.329711] pnp 00:00: [mem 0xb0000000-0xdfffffff window]
>> [    0.329713] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
>> [    0.329862] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>> [    0.329972] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
>> [    0.329975] pnp 00:01: [mem 0xfec20000-0xfec200ff]
>> [    0.330104] system 00:01: [mem 0xfec20000-0xfec200ff] could not be 
>> reserved
>> [    0.330109] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.330158] pnp 00:02: [mem 0xf6000000-0xf6003fff]
>> [    0.330241] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
>> [    0.330253] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.331692] Switched to NOHz mode on CPU #3
>> [    0.331915] Switched to NOHz mode on CPU #4
>> [    0.334948] Switched to NOHz mode on CPU #1
>> [    0.335155] Switched to NOHz mode on CPU #2
>> [    0.556162] pnp 00:03: [dma 4]
>> [    0.556165] pnp 00:03: [io  0x0000-0x000f]
>> [    0.556167] pnp 00:03: [io  0x0081-0x0083]
>> [    0.556168] pnp 00:03: [io  0x0087]
>> [    0.556170] pnp 00:03: [io  0x0089-0x008b]
>> [    0.556172] pnp 00:03: [io  0x008f]
>> [    0.556173] pnp 00:03: [io  0x00c0-0x00df]
>> [    0.556305] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>> [    0.556317] pnp 00:04: [io  0x0070-0x0071]
>> [    0.556320] xen: registering gsi 8 triggering 1 polarity 0
>> [    0.556325] xen_map_pirq_gsi: returning irq 8 for gsi 8
>> [    0.556330] xen: --> pirq=8 -> irq=8
>> [    0.556364] pnp 00:04: [irq 8]
>> [    0.556453] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>> [    0.556501] pnp 00:05: [io  0x0061]
>> [    0.556632] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>> [    0.556641] pnp 00:06: [io  0x00f0-0x00ff]
>> [    0.556643] xen: registering gsi 13 triggering 1 polarity 0
>> [    0.556646] xen_map_pirq_gsi: returning irq 13 for gsi 13
>> [    0.556649] xen: --> pirq=13 -> irq=13
>> [    0.556667] pnp 00:06: [irq 13]
>> [    0.556752] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>> [    0.557002] pnp 00:07: [io  0x03f8-0x03ff]
>> [    0.557004] xen: registering gsi 4 triggering 1 polarity 0
>> [    0.557007] xen_map_pirq_gsi: returning irq 4 for gsi 4
>> [    0.557010] xen: --> pirq=4 -> irq=4
>> [    0.557011] Already setup the GSI :4
>> [    0.557014] pnp 00:07: [irq 4]
>> [    0.557016] pnp 00:07: [dma 0 disabled]
>> [    0.557154] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>> [    0.557260] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
>> [    0.557262] pnp 00:08: [io  0x0600-0x06df]
>> [    0.557264] pnp 00:08: [io  0x0ae0-0x0aef]
>> [    0.557408] system 00:08: [io  0x0600-0x06df] has been reserved
>> [    0.557412] system 00:08: [io  0x0ae0-0x0aef] has been reserved
>> [    0.557416] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.557445] pnp 00:09: [mem 0xfed00000-0xfed003ff]
>> [    0.557533] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
>> [    0.557637] pnp 00:0a: [io  0x0060]
>> [    0.557639] pnp 00:0a: [io  0x0064]
>> [    0.557641] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
>> [    0.557643] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
>> [    0.557781] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be 
>> reserved
>> [    0.557786] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>> [    0.557790] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.557997] pnp 00:0b: [io  0x0010-0x001f]
>> [    0.557999] pnp 00:0b: [io  0x0022-0x003f]
>> [    0.558001] pnp 00:0b: [io  0x0062-0x0063]
>> [    0.558002] pnp 00:0b: [io  0x0065-0x006f]
>> [    0.558004] pnp 00:0b: [io  0x0072-0x007f]
>> [    0.558006] pnp 00:0b: [io  0x0080]
>> [    0.558007] pnp 00:0b: [io  0x0084-0x0086]
>> [    0.558009] pnp 00:0b: [io  0x0088]
>> [    0.558011] pnp 00:0b: [io  0x008c-0x008e]
>> [    0.558012] pnp 00:0b: [io  0x0090-0x009f]
>> [    0.558014] pnp 00:0b: [io  0x00a2-0x00bf]
>> [    0.558016] pnp 00:0b: [io  0x00b1]
>> [    0.558017] pnp 00:0b: [io  0x00e0-0x00ef]
>> [    0.558019] pnp 00:0b: [io  0x04d0-0x04d1]
>> [    0.558021] pnp 00:0b: [io  0x040b]
>> [    0.558022] pnp 00:0b: [io  0x04d6]
>> [    0.558024] pnp 00:0b: [io  0x0c00-0x0c01]
>> [    0.558026] pnp 00:0b: [io  0x0c14]
>> [    0.558027] pnp 00:0b: [io  0x0c50-0x0c51]
>> [    0.558029] pnp 00:0b: [io  0x0c52]
>> [    0.558031] pnp 00:0b: [io  0x0c6c]
>> [    0.558032] pnp 00:0b: [io  0x0c6f]
>> [    0.558034] pnp 00:0b: [io  0x0cd0-0x0cd1]
>> [    0.558036] pnp 00:0b: [io  0x0cd2-0x0cd3]
>> [    0.558037] pnp 00:0b: [io  0x0cd4-0x0cd5]
>> [    0.558039] pnp 00:0b: [io  0x0cd6-0x0cd7]
>> [    0.558041] pnp 00:0b: [io  0x0cd8-0x0cdf]
>> [    0.558044] pnp 00:0b: [io  0x0800-0x089f]
>> [    0.558046] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
>> [    0.558048] pnp 00:0b: [io  0x0b00-0x0b1f]
>> [    0.558050] pnp 00:0b: [io  0x0b20-0x0b3f]
>> [    0.558051] pnp 00:0b: [io  0x0900-0x090f]
>> [    0.558053] pnp 00:0b: [io  0x0910-0x091f]
>> [    0.558055] pnp 00:0b: [io  0xfe00-0xfefe]
>> [    0.558056] pnp 00:0b: [io  0x0060]
>> [    0.558058] pnp 00:0b: [io  0x0064]
>> [    0.558060] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
>> [    0.558062] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
>> [    0.558064] pnp 00:0b: [mem 0xfec10000-0xfec1001f]
>> [    0.558066] pnp 00:0b: [mem 0xfed80000-0xfed80fff]
>> [    0.558068] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
>> [    0.558264] system 00:0b: [io  0x04d0-0x04d1] has been reserved
>> [    0.558268] system 00:0b: [io  0x040b] has been reserved
>> [    0.558271] system 00:0b: [io  0x04d6] has been reserved
>> [    0.558274] system 00:0b: [io  0x0c00-0x0c01] has been reserved
>> [    0.558277] system 00:0b: [io  0x0c14] has been reserved
>> [    0.558280] system 00:0b: [io  0x0c50-0x0c51] has been reserved
>> [    0.558283] system 00:0b: [io  0x0c52] has been reserved
>> [    0.558286] system 00:0b: [io  0x0c6c] has been reserved
>> [    0.558288] system 00:0b: [io  0x0c6f] has been reserved
>> [    0.558291] system 00:0b: [io  0x0cd0-0x0cd1] has been reserved
>> [    0.558294] system 00:0b: [io  0x0cd2-0x0cd3] has been reserved
>> [    0.558298] system 00:0b: [io  0x0cd4-0x0cd5] has been reserved
>> [    0.558301] system 00:0b: [io  0x0cd6-0x0cd7] has been reserved
>> [    0.558304] system 00:0b: [io  0x0cd8-0x0cdf] has been reserved
>> [    0.558307] system 00:0b: [io  0x0800-0x089f] has been reserved
>> [    0.558310] system 00:0b: [io  0x0b00-0x0b1f] has been reserved
>> [    0.558313] system 00:0b: [io  0x0b20-0x0b3f] has been reserved
>> [    0.558317] system 00:0b: [io  0x0900-0x090f] has been reserved
>> [    0.558320] system 00:0b: [io  0x0910-0x091f] has been reserved
>> [    0.558323] system 00:0b: [io  0xfe00-0xfefe] has been reserved
>> [    0.558327] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
>> [    0.558330] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
>> [    0.558334] system 00:0b: [mem 0xfed80000-0xfed80fff] has been reserved
>> [    0.558338] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.558393] pnp 00:0c: [mem 0xe0000000-0xefffffff]
>> [    0.558535] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
>> [    0.558539] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.558695] pnp 00:0d: [mem 0x00000000-0x0009ffff]
>> [    0.558697] pnp 00:0d: [mem 0x000c0000-0x000cffff]
>> [    0.558699] pnp 00:0d: [mem 0x000e0000-0x000fffff]
>> [    0.558701] pnp 00:0d: [mem 0x00100000-0xafffffff]
>> [    0.558703] pnp 00:0d: [mem 0xfec00000-0xffffffff]
>> [    0.558850] system 00:0d: [mem 0x00000000-0x0009ffff] could not be 
>> reserved
>> [    0.558854] system 00:0d: [mem 0x000c0000-0x000cffff] could not be 
>> reserved
>> [    0.558857] system 00:0d: [mem 0x000e0000-0x000fffff] could not be 
>> reserved
>> [    0.558868] system 00:0d: [mem 0x00100000-0xafffffff] could not be 
>> reserved
>> [    0.558872] system 00:0d: [mem 0xfec00000-0xffffffff] could not be 
>> reserved
>> [    0.558876] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
>> [    0.559003] pnp: PnP ACPI: found 14 devices
>> [    0.559006] ACPI: ACPI bus type pnp unregistered
>> [    0.565638] PM-Timer failed consistency check  (0x0xffffff) - aborting.
>> [    0.565666] PCI: max bus depth: 2 pci_try_num: 3
>> [    0.565751] pci 0000:00:02.0: PCI bridge to [bus 0b-0b]
>> [    0.565756] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>> [    0.565762] pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfe9fffff]
>> [    0.565767] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 
>> 64bit pref]
>> [    0.565775] pci 0000:00:03.0: PCI bridge to [bus 0a-0a]
>> [    0.565778] pci 0000:00:03.0:   bridge window [io  disabled]
>> [    0.565784] pci 0000:00:03.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
>> [    0.565788] pci 0000:00:03.0:   bridge window [mem pref disabled]
>> [    0.565802] pci 0000:00:05.0: PCI bridge to [bus 09-09]
>> [    0.565806] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
>> [    0.565819] pci 0000:00:05.0:   bridge window [mem 0xf9e00000-0xf9efffff]
>> [    0.565824] pci 0000:00:05.0:   bridge window [mem 0xcff00000-0xcfffffff 
>> 64bit pref]
>> [    0.565831] pci 0000:00:06.0: PCI bridge to [bus 08-08]
>> [    0.565835] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
>> [    0.565841] pci 0000:00:06.0:   bridge window [mem 0xf9d00000-0xf9dfffff]
>> [    0.565846] pci 0000:00:06.0:   bridge window [mem 0xcfe00000-0xcfefffff 
>> 64bit pref]
>> [    0.565855] xen-pciback 0000:07:01.0: BAR 0: assigned [mem 
>> 0xf9c00000-0xf9c00fff]
>> [    0.565864] xen-pciback 0000:07:01.0: BAR 0: set to [mem 
>> 0xf9c00000-0xf9c00fff] (PCI address [0xf9c00000-0xf9c00fff])
>> [    0.565868] xen-pciback 0000:07:01.1: BAR 0: assigned [mem 
>> 0xf9c01000-0xf9c01fff]
>> [    0.565877] xen-pciback 0000:07:01.1: BAR 0: set to [mem 
>> 0xf9c01000-0xf9c01fff] (PCI address [0xf9c01000-0xf9c01fff])
>> [    0.565888] xen-pciback 0000:07:01.2: BAR 0: assigned [mem 
>> 0xf9c02000-0xf9c02fff]
>> [    0.565896] xen-pciback 0000:07:01.2: BAR 0: set to [mem 
>> 0xf9c02000-0xf9c02fff] (PCI address [0xf9c02000-0xf9c02fff])
>> [    0.565900] pci 0000:06:00.0: PCI bridge to [bus 07-07]
>> [    0.565903] pci 0000:06:00.0:   bridge window [io  disabled]
>> [    0.565911] pci 0000:06:00.0:   bridge window [mem 0xf9c00000-0xf9cfffff]
>> [    0.565918] pci 0000:06:00.0:   bridge window [mem pref disabled]
>> [    0.565928] pci 0000:00:0a.0: PCI bridge to [bus 06-07]
>> [    0.565930] pci 0000:00:0a.0:   bridge window [io  disabled]
>> [    0.565936] pci 0000:00:0a.0:   bridge window [mem 0xf9c00000-0xf9cfffff]
>> [    0.565941] pci 0000:00:0a.0:   bridge window [mem pref disabled]
>> [    0.565948] pci 0000:00:0b.0: PCI bridge to [bus 05-05]
>> [    0.565951] pci 0000:00:0b.0:   bridge window [io  0xb000-0xbfff]
>> [    0.565957] pci 0000:00:0b.0:   bridge window [mem 0xf9b00000-0xf9bfffff]
>> [    0.565962] pci 0000:00:0b.0:   bridge window [mem 0xb0000000-0xbfffffff 
>> 64bit pref]
>> [    0.565977] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
>> [    0.565979] pci 0000:00:0d.0:   bridge window [io  disabled]
>> [    0.565985] pci 0000:00:0d.0:   bridge window [mem 0xf9a00000-0xf9afffff]
>> [    0.565990] pci 0000:00:0d.0:   bridge window [mem pref disabled]
>> [    0.565999] pci 0000:00:14.4: PCI bridge to [bus 03-03]
>> [    0.566003] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
>> [    0.566010] pci 0000:00:14.4:   bridge window [mem disabled]
>> [    0.566015] pci 0000:00:14.4:   bridge window [mem pref disabled]
>> [    0.566024] pci 0000:00:15.0: PCI bridge to [bus 02-02]
>> [    0.566027] pci 0000:00:15.0:   bridge window [io  disabled]
>> [    0.566033] pci 0000:00:15.0:   bridge window [mem disabled]
>> [    0.566038] pci 0000:00:15.0:   bridge window [mem pref disabled]
>> [    0.566060] xen: registering gsi 52 triggering 0 polarity 1
>> [    0.566070] xen: --> pirq=52 -> irq=52
>> [    0.566090] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
>> [    0.566097] pci 0000:00:02.0: setting latency timer to 64
>> [    0.566104] xen: registering gsi 52 triggering 0 polarity 1
>> [    0.566106] xen_map_pirq_gsi: returning irq 52 for gsi 52
>> [    0.566109] xen: --> pirq=52 -> irq=52
>> [    0.566111] Already setup the GSI :52
>> [    0.566114] pci 0000:00:03.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
>> [    0.566119] pci 0000:00:03.0: setting latency timer to 64
>> [    0.566125] xen: registering gsi 52 triggering 0 polarity 1
>> [    0.566127] xen_map_pirq_gsi: returning irq 52 for gsi 52
>> [    0.566129] xen: --> pirq=52 -> irq=52
>> [    0.566131] Already setup the GSI :52
>> [    0.566134] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
>> [    0.566139] pci 0000:00:05.0: setting latency timer to 64
>> [    0.566152] xen: registering gsi 53 triggering 0 polarity 1
>> [    0.566157] xen: --> pirq=53 -> irq=53
>> [    0.566172] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
>> [    0.566178] pci 0000:00:06.0: setting latency timer to 64
>> [    0.566184] xen: registering gsi 54 triggering 0 polarity 1
>> [    0.566189] xen: --> pirq=54 -> irq=54
>> [    0.566203] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
>> [    0.566210] pci 0000:00:0a.0: setting latency timer to 64
>> [    0.566220] pci 0000:06:00.0: setting latency timer to 64
>> [    0.566262] xen: registering gsi 54 triggering 0 polarity 1
>> [    0.566264] xen_map_pirq_gsi: returning irq 54 for gsi 54
>> [    0.566267] xen: --> pirq=54 -> irq=54
>> [    0.566269] Already setup the GSI :54
>> [    0.566271] pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
>> [    0.566277] pci 0000:00:0b.0: setting latency timer to 64
>> [    0.566282] xen: registering gsi 54 triggering 0 polarity 1
>> [    0.566284] xen_map_pirq_gsi: returning irq 54 for gsi 54
>> [    0.566287] xen: --> pirq=54 -> irq=54
>> [    0.566289] Already setup the GSI :54
>> [    0.566291] pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
>> [    0.566296] pci 0000:00:0d.0: setting latency timer to 64
>> [    0.566309] xen: registering gsi 16 triggering 0 polarity 1
>> [    0.566313] xen: --> pirq=16 -> irq=16
>> [    0.566329] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> [    0.566336] pci 0000:00:15.0: setting latency timer to 64
>> [    0.566340] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>> [    0.566342] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>> [    0.566344] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> [    0.566346] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
>> [    0.566348] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff]
>> [    0.566351] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
>> [    0.566353] pci_bus 0000:0b: resource 0 [io  0xe000-0xefff]
>> [    0.566355] pci_bus 0000:0b: resource 1 [mem 0xfa000000-0xfe9fffff]
>> [    0.566357] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xdfffffff 64bit 
>> pref]
>> [    0.566359] pci_bus 0000:0a: resource 1 [mem 0xf9f00000-0xf9ffffff]
>> [    0.566361] pci_bus 0000:09: resource 0 [io  0xd000-0xdfff]
>> [    0.566363] pci_bus 0000:09: resource 1 [mem 0xf9e00000-0xf9efffff]
>> [    0.566366] pci_bus 0000:09: resource 2 [mem 0xcff00000-0xcfffffff 64bit 
>> pref]
>> [    0.566368] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
>> [    0.566370] pci_bus 0000:08: resource 1 [mem 0xf9d00000-0xf9dfffff]
>> [    0.566372] pci_bus 0000:08: resource 2 [mem 0xcfe00000-0xcfefffff 64bit 
>> pref]
>> [    0.566374] pci_bus 0000:06: resource 1 [mem 0xf9c00000-0xf9cfffff]
>> [    0.566376] pci_bus 0000:07: resource 1 [mem 0xf9c00000-0xf9cfffff]
>> [    0.566378] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
>> [    0.566380] pci_bus 0000:05: resource 1 [mem 0xf9b00000-0xf9bfffff]
>> [    0.566383] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xbfffffff 64bit 
>> pref]
>> [    0.566385] pci_bus 0000:04: resource 1 [mem 0xf9a00000-0xf9afffff]
>> [    0.566387] pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
>> [    0.566389] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>> [    0.566391] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>> [    0.566393] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>> [    0.566395] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
>> [    0.566397] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff]
>> [    0.566399] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
>> [    0.566428] NET: Registered protocol family 2
>> [    0.566469] IP route cache hash table entries: 262144 (order: 9, 2097152 
>> bytes)
>> [    0.567038] TCP established hash table entries: 262144 (order: 10, 
>> 4194304 bytes)
>> [    0.568156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> [    0.568434] TCP: Hash tables configured (established 262144 bind 65536)
>> [    0.568438] TCP reno registered
>> [    0.568443] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>> [    0.568487] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>> [    0.568610] NET: Registered protocol family 1
>> [    0.568625] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568630] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568634] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568643] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568646] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568648] pci 0000:00:00.2: calling pci_fixup_video+0x0/0xb1
>> [    0.568653] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568662] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568665] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568670] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568673] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568678] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568685] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568688] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568691] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568695] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568698] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568700] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568705] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568707] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568710] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568714] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568717] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568720] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568724] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568727] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568729] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568734] pci 0000:00:11.0: calling 
>> quirk_msi_intx_disable_ati_bug+0x0/0x41
>> [    0.568746] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568749] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    0.568751] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xb1
>> [    0.568756] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    0.568759] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.336108] pci 0000:00:12.0: calling pci_fixup_video+0x0/0xb1
>> [    1.336119] pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.336122] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.336237] pci 0000:00:12.2: calling pci_fixup_video+0x0/0xb1
>> [    1.336243] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.336246] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.364106] pci 0000:00:13.0: calling pci_fixup_video+0x0/0xb1
>> [    1.364116] pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.364118] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.364231] pci 0000:00:13.2: calling pci_fixup_video+0x0/0xb1
>> [    1.364237] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.364240] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.364250] pci 0000:00:14.0: calling pci_fixup_video+0x0/0xb1
>> [    1.364255] pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.364258] pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.364261] pci 0000:00:14.1: calling pci_fixup_video+0x0/0xb1
>> [    1.364266] pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.364269] pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.364271] pci 0000:00:14.3: calling pci_fixup_video+0x0/0xb1
>> [    1.364276] pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.364279] pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.364282] pci 0000:00:14.4: calling pci_fixup_video+0x0/0xb1
>> [    1.364287] pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.364290] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.388102] pci 0000:00:14.5: calling pci_fixup_video+0x0/0xb1
>> [    1.388112] pci 0000:00:15.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.388114] pci 0000:00:15.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.388117] pci 0000:00:15.0: calling pci_fixup_video+0x0/0xb1
>> [    1.388122] pci 0000:00:16.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.388124] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412105] pci 0000:00:16.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412115] pci 0000:00:16.2: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412118] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412230] pci 0000:00:16.2: calling pci_fixup_video+0x0/0xb1
>> [    1.412236] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412246] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412249] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412254] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412257] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412259] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xb1
>> [    1.412264] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412267] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412269] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xb1
>> [    1.412274] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412277] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412280] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xb1
>> [    1.412284] pci 0000:00:18.4: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412287] pci 0000:00:18.4: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412290] pci 0000:00:18.4: calling pci_fixup_video+0x0/0xb1
>> [    1.412295] pci 0000:0b:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
>> [    1.412310] pci 0000:0b:00.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412313] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412316] pci 0000:0b:00.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412334] pci 0000:0b:00.0: Boot video device
>> [    1.412339] xen-pciback 0000:0a:00.0: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412342] xen-pciback 0000:0a:00.0: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412401] xen-pciback 0000:0a:00.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412409] xen-pciback 0000:0a:00.1: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412419] xen-pciback 0000:0a:00.1: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412451] xen-pciback 0000:0a:00.1: calling pci_fixup_video+0x0/0xb1
>> [    1.412458] xen-pciback 0000:0a:00.2: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412461] xen-pciback 0000:0a:00.2: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412490] xen-pciback 0000:0a:00.2: calling pci_fixup_video+0x0/0xb1
>> [    1.412505] xen-pciback 0000:0a:00.3: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412508] xen-pciback 0000:0a:00.3: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412539] xen-pciback 0000:0a:00.3: calling pci_fixup_video+0x0/0xb1
>> [    1.412546] xen-pciback 0000:0a:00.4: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412549] xen-pciback 0000:0a:00.4: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412576] xen-pciback 0000:0a:00.4: calling pci_fixup_video+0x0/0xb1
>> [    1.412619] xen-pciback 0000:0a:00.5: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412622] xen-pciback 0000:0a:00.5: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412653] xen-pciback 0000:0a:00.5: calling pci_fixup_video+0x0/0xb1
>> [    1.412660] xen-pciback 0000:0a:00.6: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412663] xen-pciback 0000:0a:00.6: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412691] xen-pciback 0000:0a:00.6: calling pci_fixup_video+0x0/0xb1
>> [    1.412698] xen-pciback 0000:0a:00.7: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412701] xen-pciback 0000:0a:00.7: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412732] xen-pciback 0000:0a:00.7: calling pci_fixup_video+0x0/0xb1
>> [    1.412739] pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412741] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412744] pci 0000:09:00.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412750] pci 0000:08:00.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412753] pci 0000:08:00.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412755] pci 0000:08:00.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412768] pci 0000:06:00.0: calling quirk_cardbus_legacy+0x0/0x30
>> [    1.412771] pci 0000:06:00.0: calling quirk_xio2000a+0x0/0x84
>> [    1.412773] pci 0000:06:00.0: TI XIO2000a quirk detected; secondary bus 
>> fast back-to-back transfers disabled
>> [    1.412787] pci 0000:06:00.0: calling quirk_usb_early_handoff+0x0/0x573
>> [    1.412790] pci 0000:06:00.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412795] xen-pciback 0000:07:01.0: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412798] xen-pciback 0000:07:01.0: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412803] xen-pciback 0000:07:01.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412809] xen-pciback 0000:07:01.1: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412812] xen-pciback 0000:07:01.1: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412817] xen-pciback 0000:07:01.1: calling pci_fixup_video+0x0/0xb1
>> [    1.412823] xen-pciback 0000:07:01.2: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412826] xen-pciback 0000:07:01.2: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412831] xen-pciback 0000:07:01.2: calling pci_fixup_video+0x0/0xb1
>> [    1.412837] xen-pciback 0000:05:00.0: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412840] xen-pciback 0000:05:00.0: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412843] xen-pciback 0000:05:00.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412856] xen-pciback 0000:05:00.1: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412859] xen-pciback 0000:05:00.1: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412862] xen-pciback 0000:05:00.1: calling pci_fixup_video+0x0/0xb1
>> [    1.412873] xen-pciback 0000:04:00.0: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412876] xen-pciback 0000:04:00.0: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.412961] xen-pciback 0000:04:00.0: calling pci_fixup_video+0x0/0xb1
>> [    1.412968] xen-pciback 0000:04:00.1: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.412971] xen-pciback 0000:04:00.1: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413120] xen-pciback 0000:04:00.1: calling pci_fixup_video+0x0/0xb1
>> [    1.413127] xen-pciback 0000:04:00.2: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.413130] xen-pciback 0000:04:00.2: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413174] xen-pciback 0000:04:00.2: calling pci_fixup_video+0x0/0xb1
>> [    1.413183] xen-pciback 0000:04:00.3: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.413188] xen-pciback 0000:04:00.3: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413227] xen-pciback 0000:04:00.3: calling pci_fixup_video+0x0/0xb1
>> [    1.413234] xen-pciback 0000:04:00.4: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.413237] xen-pciback 0000:04:00.4: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413265] xen-pciback 0000:04:00.4: calling pci_fixup_video+0x0/0xb1
>> [    1.413272] xen-pciback 0000:04:00.5: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.413275] xen-pciback 0000:04:00.5: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413313] xen-pciback 0000:04:00.5: calling pci_fixup_video+0x0/0xb1
>> [    1.413320] xen-pciback 0000:04:00.6: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.413323] xen-pciback 0000:04:00.6: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413350] xen-pciback 0000:04:00.6: calling pci_fixup_video+0x0/0xb1
>> [    1.413357] xen-pciback 0000:04:00.7: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.413360] xen-pciback 0000:04:00.7: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413398] xen-pciback 0000:04:00.7: calling pci_fixup_video+0x0/0xb1
>> [    1.413405] xen-pciback 0000:03:06.0: calling 
>> quirk_cardbus_legacy+0x0/0x30
>> [    1.413408] xen-pciback 0000:03:06.0: calling 
>> quirk_usb_early_handoff+0x0/0x573
>> [    1.413411] xen-pciback 0000:03:06.0: calling pci_fixup_video+0x0/0xb1
>> [    1.413417] PCI: CLS 64 bytes, default 64
>> [    1.413468] Trying to unpack rootfs image as initramfs...
>> [    1.423693] Freeing initrd memory: 10024k freed
>> [    1.428551] audit: initializing netlink socket (disabled)
>> [    1.428569] type=2000 audit(1308662314.490:1): initialized
>> [    1.431032] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [    1.434634] VFS: Disk quotas dquot_6.5.2
>> [    1.434710] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> [    1.435890] fuse init (API version 7.16)
>> [    1.436536] Btrfs loaded
>> [    1.436543] msgmni has been set to 1111
>> [    1.436624] SELinux:  Registering netfilter hooks
>> [    1.437259] Block layer SCSI generic (bsg) driver version 0.4 loaded 
>> (major 253)
>> [    1.437264] io scheduler noop registered
>> [    1.437266] io scheduler deadline registered
>> [    1.437331] io scheduler cfq registered (default)
>> [    1.437490] pcieport 0000:00:02.0: setting latency timer to 64
>> [    1.437656] pcieport 0000:00:03.0: setting latency timer to 64
>> [    1.437825] pcieport 0000:00:05.0: setting latency timer to 64
>> [    1.437971] pcieport 0000:00:06.0: setting latency timer to 64
>> [    1.438138] pcieport 0000:00:0a.0: setting latency timer to 64
>> [    1.438286] pcieport 0000:00:0b.0: setting latency timer to 64
>> [    1.438451] pcieport 0000:00:0d.0: setting latency timer to 64
>> [    1.438608] pcieport 0000:00:15.0: setting latency timer to 64
>> [    1.438937] pcieport 0000:00:02.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438941] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
>> [    1.438947] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
>> [    1.438964] pcieport 0000:00:03.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438968] xen-pciback 0000:0a:00.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438972] xen-pciback 0000:0a:00.1: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438975] xen-pciback 0000:0a:00.2: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438979] xen-pciback 0000:0a:00.3: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438982] xen-pciback 0000:0a:00.4: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438986] xen-pciback 0000:0a:00.5: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438989] xen-pciback 0000:0a:00.6: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438993] xen-pciback 0000:0a:00.7: Signaling PME through PCIe PME 
>> interrupt
>> [    1.438998] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
>> [    1.439017] pcieport 0000:00:05.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439021] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
>> [    1.439026] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
>> [    1.439043] pcieport 0000:00:06.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439046] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
>> [    1.439052] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
>> [    1.439072] pcieport 0000:00:0a.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439077] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
>> [    1.439080] xen-pciback 0000:07:01.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439084] xen-pciback 0000:07:01.1: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439087] xen-pciback 0000:07:01.2: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439098] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
>> [    1.439133] pcieport 0000:00:0b.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439137] xen-pciback 0000:05:00.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439145] xen-pciback 0000:05:00.1: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439151] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
>> [    1.439170] pcieport 0000:00:0d.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439174] xen-pciback 0000:04:00.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439178] xen-pciback 0000:04:00.1: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439182] xen-pciback 0000:04:00.2: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439186] xen-pciback 0000:04:00.3: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439189] xen-pciback 0000:04:00.4: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439193] xen-pciback 0000:04:00.5: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439197] xen-pciback 0000:04:00.6: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439201] xen-pciback 0000:04:00.7: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439207] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
>> [    1.439234] pcieport 0000:00:15.0: Signaling PME through PCIe PME 
>> interrupt
>> [    1.439241] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
>> [    1.439378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [    1.439531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>> [    1.439536] xen-pciback: pcistub_init_devices_late
>> [    1.439539] xen-pciback 0000:03:06.0: initializing...
>> [    1.439541] xen-pciback 0000:03:06.0: initializing config
>> [    1.439543] xen-pciback 0000:03:06.0: initializing virtual configuration 
>> space
>> [    1.439546] xen-pciback 0000:03:06.0: added config field at offset 0x00
>> [    1.439549] xen-pciback 0000:03:06.0: added config field at offset 0x02
>> [    1.439551] xen-pciback 0000:03:06.0: added config field at offset 0x04
>> [    1.439554] xen-pciback 0000:03:06.0: added config field at offset 0x3c
>> [    1.439556] xen-pciback 0000:03:06.0: added config field at offset 0x3d
>> [    1.439558] xen-pciback 0000:03:06.0: added config field at offset 0x0c
>> [    1.439560] xen-pciback 0000:03:06.0: added config field at offset 0x0d
>> [    1.439563] xen-pciback 0000:03:06.0: added config field at offset 0x0f
>> [    1.439565] xen-pciback 0000:03:06.0: added config field at offset 0x10
>> [    1.439567] xen-pciback 0000:03:06.0: added config field at offset 0x14
>> [    1.439570] xen-pciback 0000:03:06.0: added config field at offset 0x18
>> [    1.439572] xen-pciback 0000:03:06.0: added config field at offset 0x1c
>> [    1.439574] xen-pciback 0000:03:06.0: added config field at offset 0x20
>> [    1.439577] xen-pciback 0000:03:06.0: added config field at offset 0x24
>> [    1.439579] xen-pciback 0000:03:06.0: added config field at offset 0x30
>> [    1.439598] xen-pciback 0000:03:06.0: Found capability 0x1 at 0xc0
>> [    1.439601] xen-pciback 0000:03:06.0: added config field at offset 0xc0
>> [    1.439603] xen-pciback 0000:03:06.0: added config field at offset 0xc2
>> [    1.439608] xen-pciback 0000:03:06.0: added config field at offset 0xc4
>> [    1.439610] xen-pciback 0000:03:06.0: added config field at offset 0xc6
>> [    1.439612] xen-pciback 0000:03:06.0: added config field at offset 0xc7
>> [    1.439627] xen-pciback 0000:03:06.0: enabling device
>> [    1.439639] xen: registering gsi 22 triggering 0 polarity 1
>> [    1.439647] xen: --> pirq=22 -> irq=22
>> [    1.439705] xen-pciback 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> 
>> IRQ 22
>> [    1.439710] xen-pciback 0000:03:06.0: reset device
>> [    1.439718] xen-pciback 0000:03:06.0: PCI INT A disabled
>> [    1.439723] xen-pciback 0000:04:00.7: initializing...
>> [    1.439725] xen-pciback 0000:04:00.7: initializing config
>> [    1.439726] xen-pciback 0000:04:00.7: initializing virtual configuration 
>> space
>> [    1.439729] xen-pciback 0000:04:00.7: added config field at offset 0x00
>> [    1.439731] xen-pciback 0000:04:00.7: added config field at offset 0x02
>> [    1.439732] xen-pciback 0000:04:00.7: added config field at offset 0x04
>> [    1.439734] xen-pciback 0000:04:00.7: added config field at offset 0x3c
>> [    1.439736] xen-pciback 0000:04:00.7: added config field at offset 0x3d
>> [    1.439738] xen-pciback 0000:04:00.7: added config field at offset 0x0c
>> [    1.439740] xen-pciback 0000:04:00.7: added config field at offset 0x0d
>> [    1.439742] xen-pciback 0000:04:00.7: added config field at offset 0x0f
>> [    1.439744] xen-pciback 0000:04:00.7: added config field at offset 0x10
>> [    1.439746] xen-pciback 0000:04:00.7: added config field at offset 0x14
>> [    1.439748] xen-pciback 0000:04:00.7: added config field at offset 0x18
>> [    1.439750] xen-pciback 0000:04:00.7: added config field at offset 0x1c
>> [    1.439752] xen-pciback 0000:04:00.7: added config field at offset 0x20
>> [    1.439754] xen-pciback 0000:04:00.7: added config field at offset 0x24
>> [    1.439756] xen-pciback 0000:04:00.7: added config field at offset 0x30
>> [    1.439782] xen-pciback 0000:04:00.7: Found capability 0x1 at 0x78
>> [    1.439784] xen-pciback 0000:04:00.7: added config field at offset 0x78
>> [    1.439786] xen-pciback 0000:04:00.7: added config field at offset 0x7a
>> [    1.439790] xen-pciback 0000:04:00.7: added config field at offset 0x7c
>> [    1.439792] xen-pciback 0000:04:00.7: added config field at offset 0x7e
>> [    1.439794] xen-pciback 0000:04:00.7: added config field at offset 0x7f
>> [    1.439796] xen-pciback 0000:04:00.7: enabling device
>> [    1.439802] xen: registering gsi 43 triggering 0 polarity 1
>> [    1.439808] xen: --> pirq=43 -> irq=43
>> [    1.439822] xen-pciback 0000:04:00.7: PCI INT D -> GSI 43 (level, low) -> 
>> IRQ 43
>> [    1.439826] xen-pciback 0000:04:00.7: reset device
>> [    1.439833] xen-pciback 0000:04:00.7: PCI INT D disabled
>> [    1.439838] xen-pciback 0000:04:00.6: initializing...
>> [    1.439840] xen-pciback 0000:04:00.6: initializing config
>> [    1.439842] xen-pciback 0000:04:00.6: initializing virtual configuration 
>> space
>> [    1.439844] xen-pciback 0000:04:00.6: added config field at offset 0x00
>> [    1.439846] xen-pciback 0000:04:00.6: added config field at offset 0x02
>> [    1.439848] xen-pciback 0000:04:00.6: added config field at offset 0x04
>> [    1.439850] xen-pciback 0000:04:00.6: added config field at offset 0x3c
>> [    1.439851] xen-pciback 0000:04:00.6: added config field at offset 0x3d
>> [    1.439853] xen-pciback 0000:04:00.6: added config field at offset 0x0c
>> [    1.439855] xen-pciback 0000:04:00.6: added config field at offset 0x0d
>> [    1.439857] xen-pciback 0000:04:00.6: added config field at offset 0x0f
>> [    1.439859] xen-pciback 0000:04:00.6: added config field at offset 0x10
>> [    1.439861] xen-pciback 0000:04:00.6: added config field at offset 0x14
>> [    1.439863] xen-pciback 0000:04:00.6: added config field at offset 0x18
>> [    1.439865] xen-pciback 0000:04:00.6: added config field at offset 0x1c
>> [    1.439867] xen-pciback 0000:04:00.6: added config field at offset 0x20
>> [    1.439869] xen-pciback 0000:04:00.6: added config field at offset 0x24
>> [    1.439871] xen-pciback 0000:04:00.6: added config field at offset 0x30
>> [    1.439897] xen-pciback 0000:04:00.6: Found capability 0x1 at 0x78
>> [    1.439899] xen-pciback 0000:04:00.6: added config field at offset 0x78
>> [    1.439901] xen-pciback 0000:04:00.6: added config field at offset 0x7a
>> [    1.439905] xen-pciback 0000:04:00.6: added config field at offset 0x7c
>> [    1.439907] xen-pciback 0000:04:00.6: added config field at offset 0x7e
>> [    1.439909] xen-pciback 0000:04:00.6: added config field at offset 0x7f
>> [    1.439911] xen-pciback 0000:04:00.6: enabling device
>> [    1.439917] xen: registering gsi 43 triggering 0 polarity 1
>> [    1.439920] xen_map_pirq_gsi: returning irq 43 for gsi 43
>> [    1.439923] xen: --> pirq=43 -> irq=43
>> [    1.439924] Already setup the GSI :43
>> [    1.439927] xen-pciback 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> 
>> IRQ 43
>> [    1.439931] xen-pciback 0000:04:00.6: reset device
>> [    1.439937] xen-pciback 0000:04:00.6: PCI INT D disabled
>> [    1.439942] xen-pciback 0000:04:00.5: initializing...
>> [    1.439943] xen-pciback 0000:04:00.5: initializing config
>> [    1.439945] xen-pciback 0000:04:00.5: initializing virtual configuration 
>> space
>> [    1.439947] xen-pciback 0000:04:00.5: added config field at offset 0x00
>> [    1.439949] xen-pciback 0000:04:00.5: added config field at offset 0x02
>> [    1.439951] xen-pciback 0000:04:00.5: added config field at offset 0x04
>> [    1.439953] xen-pciback 0000:04:00.5: added config field at offset 0x3c
>> [    1.439955] xen-pciback 0000:04:00.5: added config field at offset 0x3d
>> [    1.439957] xen-pciback 0000:04:00.5: added config field at offset 0x0c
>> [    1.439959] xen-pciback 0000:04:00.5: added config field at offset 0x0d
>> [    1.439960] xen-pciback 0000:04:00.5: added config field at offset 0x0f
>> [    1.439962] xen-pciback 0000:04:00.5: added config field at offset 0x10
>> [    1.439964] xen-pciback 0000:04:00.5: added config field at offset 0x14
>> [    1.439966] xen-pciback 0000:04:00.5: added config field at offset 0x18
>> [    1.439968] xen-pciback 0000:04:00.5: added config field at offset 0x1c
>> [    1.439970] xen-pciback 0000:04:00.5: added config field at offset 0x20
>> [    1.439972] xen-pciback 0000:04:00.5: added config field at offset 0x24
>> [    1.439974] xen-pciback 0000:04:00.5: added config field at offset 0x30
>> [    1.440000] xen-pciback 0000:04:00.5: Found capability 0x1 at 0x78
>> [    1.440002] xen-pciback 0000:04:00.5: added config field at offset 0x78
>> [    1.440004] xen-pciback 0000:04:00.5: added config field at offset 0x7a
>> [    1.440008] xen-pciback 0000:04:00.5: added config field at offset 0x7c
>> [    1.440010] xen-pciback 0000:04:00.5: added config field at offset 0x7e
>> [    1.440014] xen-pciback 0000:04:00.5: added config field at offset 0x7f
>> [    1.440016] xen-pciback 0000:04:00.5: enabling device
>> [    1.440022] xen: registering gsi 42 triggering 0 polarity 1
>> [    1.440027] xen: --> pirq=42 -> irq=42
>> [    1.440041] xen-pciback 0000:04:00.5: PCI INT C -> GSI 42 (level, low) -> 
>> IRQ 42
>> [    1.440045] xen-pciback 0000:04:00.5: reset device
>> [    1.440056] xen-pciback 0000:04:00.5: PCI INT C disabled
>> [    1.440062] xen-pciback 0000:04:00.4: initializing...
>> [    1.440064] xen-pciback 0000:04:00.4: initializing config
>> [    1.440066] xen-pciback 0000:04:00.4: initializing virtual configuration 
>> space
>> [    1.440068] xen-pciback 0000:04:00.4: added config field at offset 0x00
>> [    1.440070] xen-pciback 0000:04:00.4: added config field at offset 0x02
>> [    1.440072] xen-pciback 0000:04:00.4: added config field at offset 0x04
>> [    1.440074] xen-pciback 0000:04:00.4: added config field at offset 0x3c
>> [    1.440076] xen-pciback 0000:04:00.4: added config field at offset 0x3d
>> [    1.440077] xen-pciback 0000:04:00.4: added config field at offset 0x0c
>> [    1.440079] xen-pciback 0000:04:00.4: added config field at offset 0x0d
>> [    1.440081] xen-pciback 0000:04:00.4: added config field at offset 0x0f
>> [    1.440083] xen-pciback 0000:04:00.4: added config field at offset 0x10
>> [    1.440085] xen-pciback 0000:04:00.4: added config field at offset 0x14
>> [    1.440087] xen-pciback 0000:04:00.4: added config field at offset 0x18
>> [    1.440089] xen-pciback 0000:04:00.4: added config field at offset 0x1c
>> [    1.440091] xen-pciback 0000:04:00.4: added config field at offset 0x20
>> [    1.440093] xen-pciback 0000:04:00.4: added config field at offset 0x24
>> [    1.440095] xen-pciback 0000:04:00.4: added config field at offset 0x30
>> [    1.440120] xen-pciback 0000:04:00.4: Found capability 0x1 at 0x78
>> [    1.440122] xen-pciback 0000:04:00.4: added config field at offset 0x78
>> [    1.440124] xen-pciback 0000:04:00.4: added config field at offset 0x7a
>> [    1.440127] xen-pciback 0000:04:00.4: added config field at offset 0x7c
>> [    1.440129] xen-pciback 0000:04:00.4: added config field at offset 0x7e
>> [    1.440131] xen-pciback 0000:04:00.4: added config field at offset 0x7f
>> [    1.440133] xen-pciback 0000:04:00.4: enabling device
>> [    1.440138] xen: registering gsi 42 triggering 0 polarity 1
>> [    1.440159] xen_map_pirq_gsi: returning irq 42 for gsi 42
>> [    1.440161] xen: --> pirq=42 -> irq=42
>> [    1.440163] Already setup the GSI :42
>> [    1.440166] xen-pciback 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> 
>> IRQ 42
>> [    1.440169] xen-pciback 0000:04:00.4: reset device
>> [    1.440176] xen-pciback 0000:04:00.4: PCI INT C disabled
>> [    1.440181] xen-pciback 0000:04:00.3: initializing...
>> [    1.440183] xen-pciback 0000:04:00.3: initializing config
>> [    1.440184] xen-pciback 0000:04:00.3: initializing virtual configuration 
>> space
>> [    1.440192] xen-pciback 0000:04:00.3: added config field at offset 0x00
>> [    1.440194] xen-pciback 0000:04:00.3: added config field at offset 0x02
>> [    1.440196] xen-pciback 0000:04:00.3: added config field at offset 0x04
>> [    1.440198] xen-pciback 0000:04:00.3: added config field at offset 0x3c
>> [    1.440200] xen-pciback 0000:04:00.3: added config field at offset 0x3d
>> [    1.440202] xen-pciback 0000:04:00.3: added config field at offset 0x0c
>> [    1.440204] xen-pciback 0000:04:00.3: added config field at offset 0x0d
>> [    1.440206] xen-pciback 0000:04:00.3: added config field at offset 0x0f
>> [    1.440208] xen-pciback 0000:04:00.3: added config field at offset 0x10
>> [    1.440210] xen-pciback 0000:04:00.3: added config field at offset 0x14
>> [    1.440212] xen-pciback 0000:04:00.3: added config field at offset 0x18
>> [    1.440214] xen-pciback 0000:04:00.3: added config field at offset 0x1c
>> [    1.440216] xen-pciback 0000:04:00.3: added config field at offset 0x20
>> [    1.440218] xen-pciback 0000:04:00.3: added config field at offset 0x24
>> [    1.440220] xen-pciback 0000:04:00.3: added config field at offset 0x30
>> [    1.440247] xen-pciback 0000:04:00.3: Found capability 0x1 at 0x78
>> [    1.440248] xen-pciback 0000:04:00.3: added config field at offset 0x78
>> [    1.440250] xen-pciback 0000:04:00.3: added config field at offset 0x7a
>> [    1.440254] xen-pciback 0000:04:00.3: added config field at offset 0x7c
>> [    1.440256] xen-pciback 0000:04:00.3: added config field at offset 0x7e
>> [    1.440258] xen-pciback 0000:04:00.3: added config field at offset 0x7f
>> [    1.440260] xen-pciback 0000:04:00.3: enabling device
>> [    1.440266] xen: registering gsi 41 triggering 0 polarity 1
>> [    1.440271] xen: --> pirq=41 -> irq=41
>> [    1.440285] xen-pciback 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> 
>> IRQ 41
>> [    1.440289] xen-pciback 0000:04:00.3: reset device
>> [    1.440296] xen-pciback 0000:04:00.3: PCI INT B disabled
>> [    1.440301] xen-pciback 0000:04:00.2: initializing...
>> [    1.440303] xen-pciback 0000:04:00.2: initializing config
>> [    1.440304] xen-pciback 0000:04:00.2: initializing virtual configuration 
>> space
>> [    1.440307] xen-pciback 0000:04:00.2: added config field at offset 0x00
>> [    1.440309] xen-pciback 0000:04:00.2: added config field at offset 0x02
>> [    1.440310] xen-pciback 0000:04:00.2: added config field at offset 0x04
>> [    1.440312] xen-pciback 0000:04:00.2: added config field at offset 0x3c
>> [    1.440314] xen-pciback 0000:04:00.2: added config field at offset 0x3d
>> [    1.440316] xen-pciback 0000:04:00.2: added config field at offset 0x0c
>> [    1.440318] xen-pciback 0000:04:00.2: added config field at offset 0x0d
>> [    1.440320] xen-pciback 0000:04:00.2: added config field at offset 0x0f
>> [    1.440322] xen-pciback 0000:04:00.2: added config field at offset 0x10
>> [    1.440324] xen-pciback 0000:04:00.2: added config field at offset 0x14
>> [    1.440326] xen-pciback 0000:04:00.2: added config field at offset 0x18
>> [    1.440328] xen-pciback 0000:04:00.2: added config field at offset 0x1c
>> [    1.440330] xen-pciback 0000:04:00.2: added config field at offset 0x20
>> [    1.440332] xen-pciback 0000:04:00.2: added config field at offset 0x24
>> [    1.440334] xen-pciback 0000:04:00.2: added config field at offset 0x30
>> [    1.440360] xen-pciback 0000:04:00.2: Found capability 0x1 at 0x78
>> [    1.440362] xen-pciback 0000:04:00.2: added config field at offset 0x78
>> [    1.440364] xen-pciback 0000:04:00.2: added config field at offset 0x7a
>> [    1.440368] xen-pciback 0000:04:00.2: added config field at offset 0x7c
>> [    1.440372] xen-pciback 0000:04:00.2: added config field at offset 0x7e
>> [    1.440374] xen-pciback 0000:04:00.2: added config field at offset 0x7f
>> [    1.440376] xen-pciback 0000:04:00.2: enabling device
>> [    1.440382] xen: registering gsi 41 triggering 0 polarity 1
>> [    1.440385] xen_map_pirq_gsi: returning irq 41 for gsi 41
>> [    1.440388] xen: --> pirq=41 -> irq=41
>> [    1.440389] Already setup the GSI :41
>> [    1.440392] xen-pciback 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> 
>> IRQ 41
>> [    1.440395] xen-pciback 0000:04:00.2: reset device
>> [    1.440401] xen-pciback 0000:04:00.2: PCI INT B disabled
>> [    1.440406] xen-pciback 0000:04:00.1: initializing...
>> [    1.440408] xen-pciback 0000:04:00.1: initializing config
>> [    1.440410] xen-pciback 0000:04:00.1: initializing virtual configuration 
>> space
>> [    1.440412] xen-pciback 0000:04:00.1: added config field at offset 0x00
>> [    1.440414] xen-pciback 0000:04:00.1: added config field at offset 0x02
>> [    1.440415] xen-pciback 0000:04:00.1: added config field at offset 0x04
>> [    1.440417] xen-pciback 0000:04:00.1: added config field at offset 0x3c
>> [    1.440419] xen-pciback 0000:04:00.1: added config field at offset 0x3d
>> [    1.440421] xen-pciback 0000:04:00.1: added config field at offset 0x0c
>> [    1.440423] xen-pciback 0000:04:00.1: added config field at offset 0x0d
>> [    1.440425] xen-pciback 0000:04:00.1: added config field at offset 0x0f
>> [    1.440427] xen-pciback 0000:04:00.1: added config field at offset 0x10
>> [    1.440429] xen-pciback 0000:04:00.1: added config field at offset 0x14
>> [    1.440431] xen-pciback 0000:04:00.1: added config field at offset 0x18
>> [    1.440433] xen-pciback 0000:04:00.1: added config field at offset 0x1c
>> [    1.440435] xen-pciback 0000:04:00.1: added config field at offset 0x20
>> [    1.440437] xen-pciback 0000:04:00.1: added config field at offset 0x24
>> [    1.440439] xen-pciback 0000:04:00.1: added config field at offset 0x30
>> [    1.440465] xen-pciback 0000:04:00.1: Found capability 0x1 at 0x78
>> [    1.440467] xen-pciback 0000:04:00.1: added config field at offset 0x78
>> [    1.440469] xen-pciback 0000:04:00.1: added config field at offset 0x7a
>> [    1.440473] xen-pciback 0000:04:00.1: added config field at offset 0x7c
>> [    1.440475] xen-pciback 0000:04:00.1: added config field at offset 0x7e
>> [    1.440477] xen-pciback 0000:04:00.1: added config field at offset 0x7f
>> [    1.440478] xen-pciback 0000:04:00.1: enabling device
>> [    1.440484] xen: registering gsi 40 triggering 0 polarity 1
>> [    1.440489] xen: --> pirq=40 -> irq=40
>> [    1.440503] xen-pciback 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> 
>> IRQ 40
>> [    1.440507] xen-pciback 0000:04:00.1: reset device
>> [    1.440514] xen-pciback 0000:04:00.1: PCI INT A disabled
>> [    1.440519] xen-pciback 0000:04:00.0: initializing...
>> [    1.440520] xen-pciback 0000:04:00.0: initializing config
>> [    1.440522] xen-pciback 0000:04:00.0: initializing virtual configuration 
>> space
>> [    1.440524] xen-pciback 0000:04:00.0: added config field at offset 0x00
>> [    1.440526] xen-pciback 0000:04:00.0: added config field at offset 0x02
>> [    1.440528] xen-pciback 0000:04:00.0: added config field at offset 0x04
>> [    1.440530] xen-pciback 0000:04:00.0: added config field at offset 0x3c
>> [    1.440532] xen-pciback 0000:04:00.0: added config field at offset 0x3d
>> [    1.440534] xen-pciback 0000:04:00.0: added config field at offset 0x0c
>> [    1.440536] xen-pciback 0000:04:00.0: added config field at offset 0x0d
>> [    1.440538] xen-pciback 0000:04:00.0: added config field at offset 0x0f
>> [    1.440540] xen-pciback 0000:04:00.0: added config field at offset 0x10
>> [    1.440542] xen-pciback 0000:04:00.0: added config field at offset 0x14
>> [    1.440544] xen-pciback 0000:04:00.0: added config field at offset 0x18
>> [    1.440546] xen-pciback 0000:04:00.0: added config field at offset 0x1c
>> [    1.440548] xen-pciback 0000:04:00.0: added config field at offset 0x20
>> [    1.440549] xen-pciback 0000:04:00.0: added config field at offset 0x24
>> [    1.440551] xen-pciback 0000:04:00.0: added config field at offset 0x30
>> [    1.440578] xen-pciback 0000:04:00.0: Found capability 0x1 at 0x78
>> [    1.440580] xen-pciback 0000:04:00.0: added config field at offset 0x78
>> [    1.440582] xen-pciback 0000:04:00.0: added config field at offset 0x7a
>> [    1.440586] xen-pciback 0000:04:00.0: added config field at offset 0x7c
>> [    1.440588] xen-pciback 0000:04:00.0: added config field at offset 0x7e
>> [    1.440590] xen-pciback 0000:04:00.0: added config field at offset 0x7f
>> [    1.440591] xen-pciback 0000:04:00.0: enabling device
>> [    1.440597] xen: registering gsi 40 triggering 0 polarity 1
>> [    1.440600] xen_map_pirq_gsi: returning irq 40 for gsi 40
>> [    1.440603] xen: --> pirq=40 -> irq=40
>> [    1.440604] Already setup the GSI :40
>> [    1.440607] xen-pciback 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> 
>> IRQ 40
>> [    1.440610] xen-pciback 0000:04:00.0: reset device
>> [    1.440616] xen-pciback 0000:04:00.0: PCI INT A disabled
>> [    1.440621] xen-pciback 0000:05:00.1: initializing...
>> [    1.440623] xen-pciback 0000:05:00.1: initializing config
>> [    1.440624] xen-pciback 0000:05:00.1: initializing virtual configuration 
>> space
>> [    1.440626] xen-pciback 0000:05:00.1: added config field at offset 0x00
>> [    1.440628] xen-pciback 0000:05:00.1: added config field at offset 0x02
>> [    1.440630] xen-pciback 0000:05:00.1: added config field at offset 0x04
>> [    1.440632] xen-pciback 0000:05:00.1: added config field at offset 0x3c
>> [    1.440634] xen-pciback 0000:05:00.1: added config field at offset 0x3d
>> [    1.440636] xen-pciback 0000:05:00.1: added config field at offset 0x0c
>> [    1.440638] xen-pciback 0000:05:00.1: added config field at offset 0x0d
>> [    1.440640] xen-pciback 0000:05:00.1: added config field at offset 0x0f
>> [    1.440642] xen-pciback 0000:05:00.1: added config field at offset 0x10
>> [    1.440644] xen-pciback 0000:05:00.1: added config field at offset 0x14
>> [    1.440646] xen-pciback 0000:05:00.1: added config field at offset 0x18
>> [    1.440648] xen-pciback 0000:05:00.1: added config field at offset 0x1c
>> [    1.440650] xen-pciback 0000:05:00.1: added config field at offset 0x20
>> [    1.440652] xen-pciback 0000:05:00.1: added config field at offset 0x24
>> [    1.440654] xen-pciback 0000:05:00.1: added config field at offset 0x30
>> [    1.440672] xen-pciback 0000:05:00.1: Found capability 0x1 at 0x50
>> [    1.440674] xen-pciback 0000:05:00.1: added config field at offset 0x50
>> [    1.440676] xen-pciback 0000:05:00.1: added config field at offset 0x52
>> [    1.440679] xen-pciback 0000:05:00.1: added config field at offset 0x54
>> [    1.440683] xen-pciback 0000:05:00.1: added config field at offset 0x56
>> [    1.440685] xen-pciback 0000:05:00.1: added config field at offset 0x57
>> [    1.440687] xen-pciback 0000:05:00.1: enabling device
>> [    1.440692] xen: registering gsi 33 triggering 0 polarity 1
>> [    1.440698] xen: --> pirq=33 -> irq=33
>> [    1.440711] xen-pciback 0000:05:00.1: PCI INT B -> GSI 33 (level, low) -> 
>> IRQ 33
>> [    1.440715] xen-pciback 0000:05:00.1: reset device
>> [    1.440721] xen-pciback 0000:05:00.1: PCI INT B disabled
>> [    1.440726] xen-pciback 0000:05:00.0: initializing...
>> [    1.440728] xen-pciback 0000:05:00.0: initializing config
>> [    1.440730] xen-pciback 0000:05:00.0: initializing virtual configuration 
>> space
>> [    1.440732] xen-pciback 0000:05:00.0: added config field at offset 0x00
>> [    1.440734] xen-pciback 0000:05:00.0: added config field at offset 0x02
>> [    1.440735] xen-pciback 0000:05:00.0: added config field at offset 0x04
>> [    1.440737] xen-pciback 0000:05:00.0: added config field at offset 0x3c
>> [    1.440739] xen-pciback 0000:05:00.0: added config field at offset 0x3d
>> [    1.440741] xen-pciback 0000:05:00.0: added config field at offset 0x0c
>> [    1.440743] xen-pciback 0000:05:00.0: added config field at offset 0x0d
>> [    1.440745] xen-pciback 0000:05:00.0: added config field at offset 0x0f
>> [    1.440747] xen-pciback 0000:05:00.0: added config field at offset 0x10
>> [    1.440749] xen-pciback 0000:05:00.0: added config field at offset 0x14
>> [    1.440751] xen-pciback 0000:05:00.0: added config field at offset 0x18
>> [    1.440753] xen-pciback 0000:05:00.0: added config field at offset 0x1c
>> [    1.440755] xen-pciback 0000:05:00.0: added config field at offset 0x20
>> [    1.440757] xen-pciback 0000:05:00.0: added config field at offset 0x24
>> [    1.440759] xen-pciback 0000:05:00.0: added config field at offset 0x30
>> [    1.440777] xen-pciback 0000:05:00.0: Found capability 0x1 at 0x50
>> [    1.440779] xen-pciback 0000:05:00.0: added config field at offset 0x50
>> [    1.440781] xen-pciback 0000:05:00.0: added config field at offset 0x52
>> [    1.440785] xen-pciback 0000:05:00.0: added config field at offset 0x54
>> [    1.440787] xen-pciback 0000:05:00.0: added config field at offset 0x56
>> [    1.440788] xen-pciback 0000:05:00.0: added config field at offset 0x57
>> [    1.440790] xen-pciback 0000:05:00.0: enabling device
>> [    1.440796] xen-pciback 0000:05:00.0: enabling device (0000 -> 0003)
>> [    1.440800] xen: registering gsi 32 triggering 0 polarity 1
>> [    1.440806] xen: --> pirq=32 -> irq=32
>> [    1.440820] xen-pciback 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> 
>> IRQ 32
>> [    1.440824] xen-pciback 0000:05:00.0: reset device
>> [    1.440828] xen-pciback 0000:05:00.0: PCI INT A disabled
>> [    1.440833] xen-pciback 0000:07:01.2: initializing...
>> [    1.440835] xen-pciback 0000:07:01.2: initializing config
>> [    1.440836] xen-pciback 0000:07:01.2: initializing virtual configuration 
>> space
>> [    1.440838] xen-pciback 0000:07:01.2: added config field at offset 0x00
>> [    1.440840] xen-pciback 0000:07:01.2: added config field at offset 0x02
>> [    1.440842] xen-pciback 0000:07:01.2: added config field at offset 0x04
>> [    1.440844] xen-pciback 0000:07:01.2: added config field at offset 0x3c
>> [    1.440846] xen-pciback 0000:07:01.2: added config field at offset 0x3d
>> [    1.440848] xen-pciback 0000:07:01.2: added config field at offset 0x0c
>> [    1.440850] xen-pciback 0000:07:01.2: added config field at offset 0x0d
>> [    1.440852] xen-pciback 0000:07:01.2: added config field at offset 0x0f
>> [    1.440854] xen-pciback 0000:07:01.2: added config field at offset 0x10
>> [    1.440856] xen-pciback 0000:07:01.2: added config field at offset 0x14
>> [    1.440858] xen-pciback 0000:07:01.2: added config field at offset 0x18
>> [    1.440860] xen-pciback 0000:07:01.2: added config field at offset 0x1c
>> [    1.440862] xen-pciback 0000:07:01.2: added config field at offset 0x20
>> [    1.440864] xen-pciback 0000:07:01.2: added config field at offset 0x24
>> [    1.440865] xen-pciback 0000:07:01.2: added config field at offset 0x30
>> [    1.440882] xen-pciback 0000:07:01.2: Found capability 0x1 at 0x40
>> [    1.440884] xen-pciback 0000:07:01.2: added config field at offset 0x40
>> [    1.440886] xen-pciback 0000:07:01.2: added config field at offset 0x42
>> [    1.440890] xen-pciback 0000:07:01.2: added config field at offset 0x44
>> [    1.440892] xen-pciback 0000:07:01.2: added config field at offset 0x46
>> [    1.440894] xen-pciback 0000:07:01.2: added config field at offset 0x47
>> [    1.440896] xen-pciback 0000:07:01.2: enabling device
>> [    1.440910] xen-pciback 0000:07:01.2: enabling device (0114 -> 0116)
>> [    1.440916] xen: registering gsi 46 triggering 0 polarity 1
>> [    1.440921] xen: --> pirq=46 -> irq=46
>> [    1.440935] xen-pciback 0000:07:01.2: PCI INT C -> GSI 46 (level, low) -> 
>> IRQ 46
>> [    1.440939] xen-pciback 0000:07:01.2: reset device
>> [    1.440946] xen-pciback 0000:07:01.2: PCI INT C disabled
>> [    1.440951] xen-pciback 0000:07:01.1: initializing...
>> [    1.440953] xen-pciback 0000:07:01.1: initializing config
>> [    1.440955] xen-pciback 0000:07:01.1: initializing virtual configuration 
>> space
>> [    1.440957] xen-pciback 0000:07:01.1: added config field at offset 0x00
>> [    1.440966] xen-pciback 0000:07:01.1: added config field at offset 0x02
>> [    1.440968] xen-pciback 0000:07:01.1: added config field at offset 0x04
>> [    1.440970] xen-pciback 0000:07:01.1: added config field at offset 0x3c
>> [    1.440972] xen-pciback 0000:07:01.1: added config field at offset 0x3d
>> [    1.440974] xen-pciback 0000:07:01.1: added config field at offset 0x0c
>> [    1.440976] xen-pciback 0000:07:01.1: added config field at offset 0x0d
>> [    1.440978] xen-pciback 0000:07:01.1: added config field at offset 0x0f
>> [    1.440980] xen-pciback 0000:07:01.1: added config field at offset 0x10
>> [    1.440982] xen-pciback 0000:07:01.1: added config field at offset 0x14
>> [    1.440984] xen-pciback 0000:07:01.1: added config field at offset 0x18
>> [    1.440986] xen-pciback 0000:07:01.1: added config field at offset 0x1c
>> [    1.440988] xen-pciback 0000:07:01.1: added config field at offset 0x20
>> [    1.440990] xen-pciback 0000:07:01.1: added config field at offset 0x24
>> [    1.440992] xen-pciback 0000:07:01.1: added config field at offset 0x30
>> [    1.441009] xen-pciback 0000:07:01.1: Found capability 0x1 at 0x40
>> [    1.441011] xen-pciback 0000:07:01.1: added config field at offset 0x40
>> [    1.441015] xen-pciback 0000:07:01.1: added config field at offset 0x42
>> [    1.441019] xen-pciback 0000:07:01.1: added config field at offset 0x44
>> [    1.441021] xen-pciback 0000:07:01.1: added config field at offset 0x46
>> [    1.441023] xen-pciback 0000:07:01.1: added config field at offset 0x47
>> [    1.441025] xen-pciback 0000:07:01.1: enabling device
>> [    1.441031] xen-pciback 0000:07:01.1: enabling device (0114 -> 0116)
>> [    1.441037] xen: registering gsi 45 triggering 0 polarity 1
>> [    1.441042] xen: --> pirq=45 -> irq=45
>> [    1.441091] xen-pciback 0000:07:01.1: PCI INT B -> GSI 45 (level, low) -> 
>> IRQ 45
>> [    1.441095] xen-pciback 0000:07:01.1: reset device
>> [    1.441102] xen-pciback 0000:07:01.1: PCI INT B disabled
>> [    1.441107] xen-pciback 0000:07:01.0: initializing...
>> [    1.441109] xen-pciback 0000:07:01.0: initializing config
>> [    1.441111] xen-pciback 0000:07:01.0: initializing virtual configuration 
>> space
>> [    1.441113] xen-pciback 0000:07:01.0: added config field at offset 0x00
>> [    1.441115] xen-pciback 0000:07:01.0: added config field at offset 0x02
>> [    1.441117] xen-pciback 0000:07:01.0: added config field at offset 0x04
>> [    1.441119] xen-pciback 0000:07:01.0: added config field at offset 0x3c
>> [    1.441121] xen-pciback 0000:07:01.0: added config field at offset 0x3d
>> [    1.441123] xen-pciback 0000:07:01.0: added config field at offset 0x0c
>> [    1.441125] xen-pciback 0000:07:01.0: added config field at offset 0x0d
>> [    1.441127] xen-pciback 0000:07:01.0: added config field at offset 0x0f
>> [    1.441129] xen-pciback 0000:07:01.0: added config field at offset 0x10
>> [    1.441131] xen-pciback 0000:07:01.0: added config field at offset 0x14
>> [    1.441132] xen-pciback 0000:07:01.0: added config field at offset 0x18
>> [    1.441134] xen-pciback 0000:07:01.0: added config field at offset 0x1c
>> [    1.441136] xen-pciback 0000:07:01.0: added config field at offset 0x20
>> [    1.441138] xen-pciback 0000:07:01.0: added config field at offset 0x24
>> [    1.441140] xen-pciback 0000:07:01.0: added config field at offset 0x30
>> [    1.441157] xen-pciback 0000:07:01.0: Found capability 0x1 at 0x40
>> [    1.441159] xen-pciback 0000:07:01.0: added config field at offset 0x40
>> [    1.441161] xen-pciback 0000:07:01.0: added config field at offset 0x42
>> [    1.441165] xen-pciback 0000:07:01.0: added config field at offset 0x44
>> [    1.441167] xen-pciback 0000:07:01.0: added config field at offset 0x46
>> [    1.441169] xen-pciback 0000:07:01.0: added config field at offset 0x47
>> [    1.441171] xen-pciback 0000:07:01.0: enabling device
>> [    1.441177] xen-pciback 0000:07:01.0: enabling device (0114 -> 0116)
>> [    1.441182] xen: registering gsi 44 triggering 0 polarity 1
>> [    1.441188] xen: --> pirq=44 -> irq=44
>> [    1.441201] xen-pciback 0000:07:01.0: PCI INT A -> GSI 44 (level, low) -> 
>> IRQ 44
>> [    1.441205] xen-pciback 0000:07:01.0: reset device
>> [    1.441212] xen-pciback 0000:07:01.0: PCI INT A disabled
>> [    1.441217] xen-pciback 0000:0a:00.7: initializing...
>> [    1.441227] xen-pciback 0000:0a:00.7: initializing config
>> [    1.441228] xen-pciback 0000:0a:00.7: initializing virtual configuration 
>> space
>> [    1.441231] xen-pciback 0000:0a:00.7: added config field at offset 0x00
>> [    1.441232] xen-pciback 0000:0a:00.7: added config field at offset 0x02
>> [    1.441234] xen-pciback 0000:0a:00.7: added config field at offset 0x04
>> [    1.441236] xen-pciback 0000:0a:00.7: added config field at offset 0x3c
>> [    1.441238] xen-pciback 0000:0a:00.7: added config field at offset 0x3d
>> [    1.441240] xen-pciback 0000:0a:00.7: added config field at offset 0x0c
>> [    1.441242] xen-pciback 0000:0a:00.7: added config field at offset 0x0d
>> [    1.441244] xen-pciback 0000:0a:00.7: added config field at offset 0x0f
>> [    1.441248] xen-pciback 0000:0a:00.7: added config field at offset 0x10
>> [    1.441250] xen-pciback 0000:0a:00.7: added config field at offset 0x14
>> [    1.441252] xen-pciback 0000:0a:00.7: added config field at offset 0x18
>> [    1.441254] xen-pciback 0000:0a:00.7: added config field at offset 0x1c
>> [    1.441256] xen-pciback 0000:0a:00.7: added config field at offset 0x20
>> [    1.441258] xen-pciback 0000:0a:00.7: added config field at offset 0x24
>> [    1.441260] xen-pciback 0000:0a:00.7: added config field at offset 0x30
>> [    1.441287] xen-pciback 0000:0a:00.7: Found capability 0x1 at 0x78
>> [    1.441289] xen-pciback 0000:0a:00.7: added config field at offset 0x78
>> [    1.441291] xen-pciback 0000:0a:00.7: added config field at offset 0x7a
>> [    1.441295] xen-pciback 0000:0a:00.7: added config field at offset 0x7c
>> [    1.441297] xen-pciback 0000:0a:00.7: added config field at offset 0x7e
>> [    1.441299] xen-pciback 0000:0a:00.7: added config field at offset 0x7f
>> [    1.441301] xen-pciback 0000:0a:00.7: enabling device
>> [    1.441314] xen: registering gsi 31 triggering 0 polarity 1
>> [    1.441319] xen: --> pirq=31 -> irq=31
>> [    1.441332] xen-pciback 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> 
>> IRQ 31
>> [    1.441336] xen-pciback 0000:0a:00.7: reset device
>> [    1.441343] xen-pciback 0000:0a:00.7: PCI INT D disabled
>> [    1.441349] xen-pciback 0000:0a:00.6: initializing...
>> [    1.441350] xen-pciback 0000:0a:00.6: initializing config
>> [    1.441352] xen-pciback 0000:0a:00.6: initializing virtual configuration 
>> space
>> [    1.441354] xen-pciback 0000:0a:00.6: added config field at offset 0x00
>> [    1.441356] xen-pciback 0000:0a:00.6: added config field at offset 0x02
>> [    1.441358] xen-pciback 0000:0a:00.6: added config field at offset 0x04
>> [    1.441360] xen-pciback 0000:0a:00.6: added config field at offset 0x3c
>> [    1.441362] xen-pciback 0000:0a:00.6: added config field at offset 0x3d
>> [    1.441364] xen-pciback 0000:0a:00.6: added config field at offset 0x0c
>> [    1.441366] xen-pciback 0000:0a:00.6: added config field at offset 0x0d
>> [    1.441368] xen-pciback 0000:0a:00.6: added config field at offset 0x0f
>> [    1.441370] xen-pciback 0000:0a:00.6: added config field at offset 0x10
>> [    1.441372] xen-pciback 0000:0a:00.6: added config field at offset 0x14
>> [    1.441374] xen-pciback 0000:0a:00.6: added config field at offset 0x18
>> [    1.441376] xen-pciback 0000:0a:00.6: added config field at offset 0x1c
>> [    1.441378] xen-pciback 0000:0a:00.6: added config field at offset 0x20
>> [    1.441380] xen-pciback 0000:0a:00.6: added config field at offset 0x24
>> [    1.441383] xen-pciback 0000:0a:00.6: added config field at offset 0x30
>> [    1.441418] xen-pciback 0000:0a:00.6: Found capability 0x1 at 0x78
>> [    1.441420] xen-pciback 0000:0a:00.6: added config field at offset 0x78
>> [    1.441422] xen-pciback 0000:0a:00.6: added config field at offset 0x7a
>> [    1.441426] xen-pciback 0000:0a:00.6: added config field at offset 0x7c
>> [    1.441428] xen-pciback 0000:0a:00.6: added config field at offset 0x7e
>> [    1.441429] xen-pciback 0000:0a:00.6: added config field at offset 0x7f
>> [    1.441431] xen-pciback 0000:0a:00.6: enabling device
>> [    1.441438] xen: registering gsi 31 triggering 0 polarity 1
>> [    1.441440] xen_map_pirq_gsi: returning irq 31 for gsi 31
>> [    1.441443] xen: --> pirq=31 -> irq=31
>> [    1.441445] Already setup the GSI :31
>> [    1.441447] xen-pciback 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> 
>> IRQ 31
>> [    1.441451] xen-pciback 0000:0a:00.6: reset device
>> [    1.441457] xen-pciback 0000:0a:00.6: PCI INT D disabled
>> [    1.441462] xen-pciback 0000:0a:00.5: initializing...
>> [    1.441463] xen-pciback 0000:0a:00.5: initializing config
>> [    1.441465] xen-pciback 0000:0a:00.5: initializing virtual configuration 
>> space
>> [    1.441467] xen-pciback 0000:0a:00.5: added config field at offset 0x00
>> [    1.441469] xen-pciback 0000:0a:00.5: added config field at offset 0x02
>> [    1.441471] xen-pciback 0000:0a:00.5: added config field at offset 0x04
>> [    1.441473] xen-pciback 0000:0a:00.5: added config field at offset 0x3c
>> [    1.441475] xen-pciback 0000:0a:00.5: added config field at offset 0x3d
>> [    1.441477] xen-pciback 0000:0a:00.5: added config field at offset 0x0c
>> [    1.441479] xen-pciback 0000:0a:00.5: added config field at offset 0x0d
>> [    1.441488] xen-pciback 0000:0a:00.5: added config field at offset 0x0f
>> [    1.441490] xen-pciback 0000:0a:00.5: added config field at offset 0x10
>> [    1.441491] xen-pciback 0000:0a:00.5: added config field at offset 0x14
>> [    1.441493] xen-pciback 0000:0a:00.5: added config field at offset 0x18
>> [    1.441495] xen-pciback 0000:0a:00.5: added config field at offset 0x1c
>> [    1.441497] xen-pciback 0000:0a:00.5: added config field at offset 0x20
>> [    1.441499] xen-pciback 0000:0a:00.5: added config field at offset 0x24
>> [    1.441501] xen-pciback 0000:0a:00.5: added config field at offset 0x30
>> [    1.441528] xen-pciback 0000:0a:00.5: Found capability 0x1 at 0x78
>> [    1.441530] xen-pciback 0000:0a:00.5: added config field at offset 0x78
>> [    1.441532] xen-pciback 0000:0a:00.5: added config field at offset 0x7a
>> [    1.441536] xen-pciback 0000:0a:00.5: added config field at offset 0x7c
>> [    1.441538] xen-pciback 0000:0a:00.5: added config field at offset 0x7e
>> [    1.441539] xen-pciback 0000:0a:00.5: added config field at offset 0x7f
>> [    1.441541] xen-pciback 0000:0a:00.5: enabling device
>> [    1.441547] xen: registering gsi 30 triggering 0 polarity 1
>> [    1.441552] xen: --> pirq=30 -> irq=30
>> [    1.441566] xen-pciback 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> 
>> IRQ 30
>> [    1.441577] xen-pciback 0000:0a:00.5: reset device
>> [    1.441584] xen-pciback 0000:0a:00.5: PCI INT C disabled
>> [    1.441589] xen-pciback 0000:0a:00.4: initializing...
>> [    1.441591] xen-pciback 0000:0a:00.4: initializing config
>> [    1.441593] xen-pciback 0000:0a:00.4: initializing virtual configuration 
>> space
>> [    1.441595] xen-pciback 0000:0a:00.4: added config field at offset 0x00
>> [    1.441597] xen-pciback 0000:0a:00.4: added config field at offset 0x02
>> [    1.441598] xen-pciback 0000:0a:00.4: added config field at offset 0x04
>> [    1.441600] xen-pciback 0000:0a:00.4: added config field at offset 0x3c
>> [    1.441602] xen-pciback 0000:0a:00.4: added config field at offset 0x3d
>> [    1.441604] xen-pciback 0000:0a:00.4: added config field at offset 0x0c
>> [    1.441606] xen-pciback 0000:0a:00.4: added config field at offset 0x0d
>> [    1.441608] xen-pciback 0000:0a:00.4: added config field at offset 0x0f
>> [    1.441610] xen-pciback 0000:0a:00.4: added config field at offset 0x10
>> [    1.441612] xen-pciback 0000:0a:00.4: added config field at offset 0x14
>> [    1.441614] xen-pciback 0000:0a:00.4: added config field at offset 0x18
>> [    1.441616] xen-pciback 0000:0a:00.4: added config field at offset 0x1c
>> [    1.441618] xen-pciback 0000:0a:00.4: added config field at offset 0x20
>> [    1.441620] xen-pciback 0000:0a:00.4: added config field at offset 0x24
>> [    1.441622] xen-pciback 0000:0a:00.4: added config field at offset 0x30
>> [    1.441648] xen-pciback 0000:0a:00.4: Found capability 0x1 at 0x78
>> [    1.441650] xen-pciback 0000:0a:00.4: added config field at offset 0x78
>> [    1.441652] xen-pciback 0000:0a:00.4: added config field at offset 0x7a
>> [    1.441663] xen-pciback 0000:0a:00.4: added config field at offset 0x7c
>> [    1.441665] xen-pciback 0000:0a:00.4: added config field at offset 0x7e
>> [    1.441667] xen-pciback 0000:0a:00.4: added config field at offset 0x7f
>> [    1.441669] xen-pciback 0000:0a:00.4: enabling device
>> [    1.441675] xen: registering gsi 30 triggering 0 polarity 1
>> [    1.441677] xen_map_pirq_gsi: returning irq 30 for gsi 30
>> [    1.441680] xen: --> pirq=30 -> irq=30
>> [    1.441681] Already setup the GSI :30
>> [    1.441684] xen-pciback 0000:0a:00.4: PCI INT C -> GSI 30 (level, low) -> 
>> IRQ 30
>> [    1.441688] xen-pciback 0000:0a:00.4: reset device
>> [    1.441694] xen-pciback 0000:0a:00.4: PCI INT C disabled
>> [    1.441699] xen-pciback 0000:0a:00.3: initializing...
>> [    1.441701] xen-pciback 0000:0a:00.3: initializing config
>> [    1.441702] xen-pciback 0000:0a:00.3: initializing virtual configuration 
>> space
>> [    1.441704] xen-pciback 0000:0a:00.3: added config field at offset 0x00
>> [    1.441706] xen-pciback 0000:0a:00.3: added config field at offset 0x02
>> [    1.441708] xen-pciback 0000:0a:00.3: added config field at offset 0x04
>> [    1.441710] xen-pciback 0000:0a:00.3: added config field at offset 0x3c
>> [    1.441712] xen-pciback 0000:0a:00.3: added config field at offset 0x3d
>> [    1.441714] xen-pciback 0000:0a:00.3: added config field at offset 0x0c
>> [    1.441716] xen-pciback 0000:0a:00.3: added config field at offset 0x0d
>> [    1.441718] xen-pciback 0000:0a:00.3: added config field at offset 0x0f
>> [    1.441720] xen-pciback 0000:0a:00.3: added config field at offset 0x10
>> [    1.441722] xen-pciback 0000:0a:00.3: added config field at offset 0x14
>> [    1.441724] xen-pciback 0000:0a:00.3: added config field at offset 0x18
>> [    1.441726] xen-pciback 0000:0a:00.3: added config field at offset 0x1c
>> [    1.441727] xen-pciback 0000:0a:00.3: added config field at offset 0x20
>> [    1.441729] xen-pciback 0000:0a:00.3: added config field at offset 0x24
>> [    1.441733] xen-pciback 0000:0a:00.3: added config field at offset 0x30
>> [    1.441767] xen-pciback 0000:0a:00.3: Found capability 0x1 at 0x78
>> [    1.441769] xen-pciback 0000:0a:00.3: added config field at offset 0x78
>> [    1.441771] xen-pciback 0000:0a:00.3: added config field at offset 0x7a
>> [    1.441775] xen-pciback 0000:0a:00.3: added config field at offset 0x7c
>> [    1.441777] xen-pciback 0000:0a:00.3: added config field at offset 0x7e
>> [    1.441779] xen-pciback 0000:0a:00.3: added config field at offset 0x7f
>> [    1.441781] xen-pciback 0000:0a:00.3: enabling device
>> [    1.441787] xen: registering gsi 29 triggering 0 polarity 1
>> [    1.441792] xen: --> pirq=29 -> irq=29
>> [    1.441806] xen-pciback 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> 
>> IRQ 29
>> [    1.441810] xen-pciback 0000:0a:00.3: reset device
>> [    1.441817] xen-pciback 0000:0a:00.3: PCI INT B disabled
>> [    1.441821] xen-pciback 0000:0a:00.2: initializing...
>> [    1.441823] xen-pciback 0000:0a:00.2: initializing config
>> [    1.441825] xen-pciback 0000:0a:00.2: initializing virtual configuration 
>> space
>> [    1.441835] xen-pciback 0000:0a:00.2: added config field at offset 0x00
>> [    1.441836] xen-pciback 0000:0a:00.2: added config field at offset 0x02
>> [    1.441838] xen-pciback 0000:0a:00.2: added config field at offset 0x04
>> [    1.441840] xen-pciback 0000:0a:00.2: added config field at offset 0x3c
>> [    1.441842] xen-pciback 0000:0a:00.2: added config field at offset 0x3d
>> [    1.441844] xen-pciback 0000:0a:00.2: added config field at offset 0x0c
>> [    1.441846] xen-pciback 0000:0a:00.2: added config field at offset 0x0d
>> [    1.441848] xen-pciback 0000:0a:00.2: added config field at offset 0x0f
>> [    1.441850] xen-pciback 0000:0a:00.2: added config field at offset 0x10
>> [    1.441852] xen-pciback 0000:0a:00.2: added config field at offset 0x14
>> [    1.441854] xen-pciback 0000:0a:00.2: added config field at offset 0x18
>> [    1.441856] xen-pciback 0000:0a:00.2: added config field at offset 0x1c
>> [    1.441858] xen-pciback 0000:0a:00.2: added config field at offset 0x20
>> [    1.441860] xen-pciback 0000:0a:00.2: added config field at offset 0x24
>> [    1.441862] xen-pciback 0000:0a:00.2: added config field at offset 0x30
>> [    1.441888] xen-pciback 0000:0a:00.2: Found capability 0x1 at 0x78
>> [    1.441890] xen-pciback 0000:0a:00.2: added config field at offset 0x78
>> [    1.441892] xen-pciback 0000:0a:00.2: added config field at offset 0x7a
>> [    1.441896] xen-pciback 0000:0a:00.2: added config field at offset 0x7c
>> [    1.441898] xen-pciback 0000:0a:00.2: added config field at offset 0x7e
>> [    1.441900] xen-pciback 0000:0a:00.2: added config field at offset 0x7f
>> [    1.441902] xen-pciback 0000:0a:00.2: enabling device
>> [    1.441908] xen: registering gsi 29 triggering 0 polarity 1
>> [    1.441910] xen_map_pirq_gsi: returning irq 29 for gsi 29
>> [    1.441920] xen: --> pirq=29 -> irq=29
>> [    1.441921] Already setup the GSI :29
>> [    1.441924] xen-pciback 0000:0a:00.2: PCI INT B -> GSI 29 (level, low) -> 
>> IRQ 29
>> [    1.441928] xen-pciback 0000:0a:00.2: reset device
>> [    1.441934] xen-pciback 0000:0a:00.2: PCI INT B disabled
>> [    1.441939] xen-pciback 0000:0a:00.1: initializing...
>> [    1.441940] xen-pciback 0000:0a:00.1: initializing config
>> [    1.441942] xen-pciback 0000:0a:00.1: initializing virtual configuration 
>> space
>> [    1.441944] xen-pciback 0000:0a:00.1: added config field at offset 0x00
>> [    1.441946] xen-pciback 0000:0a:00.1: added config field at offset 0x02
>> [    1.441948] xen-pciback 0000:0a:00.1: added config field at offset 0x04
>> [    1.441950] xen-pciback 0000:0a:00.1: added config field at offset 0x3c
>> [    1.441952] xen-pciback 0000:0a:00.1: added config field at offset 0x3d
>> [    1.441954] xen-pciback 0000:0a:00.1: added config field at offset 0x0c
>> [    1.441955] xen-pciback 0000:0a:00.1: added config field at offset 0x0d
>> [    1.441957] xen-pciback 0000:0a:00.1: added config field at offset 0x0f
>> [    1.441959] xen-pciback 0000:0a:00.1: added config field at offset 0x10
>> [    1.441961] xen-pciback 0000:0a:00.1: added config field at offset 0x14
>> [    1.441963] xen-pciback 0000:0a:00.1: added config field at offset 0x18
>> [    1.441965] xen-pciback 0000:0a:00.1: added config field at offset 0x1c
>> [    1.441967] xen-pciback 0000:0a:00.1: added config field at offset 0x20
>> [    1.441969] xen-pciback 0000:0a:00.1: added config field at offset 0x24
>> [    1.441971] xen-pciback 0000:0a:00.1: added config field at offset 0x30
>> [    1.441998] xen-pciback 0000:0a:00.1: Found capability 0x1 at 0x78
>> [    1.442007] xen-pciback 0000:0a:00.1: added config field at offset 0x78
>> [    1.442009] xen-pciback 0000:0a:00.1: added config field at offset 0x7a
>> [    1.442012] xen-pciback 0000:0a:00.1: added config field at offset 0x7c
>> [    1.442014] xen-pciback 0000:0a:00.1: added config field at offset 0x7e
>> [    1.442016] xen-pciback 0000:0a:00.1: added config field at offset 0x7f
>> [    1.442018] xen-pciback 0000:0a:00.1: enabling device
>> [    1.442024] xen: registering gsi 28 triggering 0 polarity 1
>> [    1.442029] xen: --> pirq=28 -> irq=28
>> [    1.442042] xen-pciback 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> 
>> IRQ 28
>> [    1.442046] xen-pciback 0000:0a:00.1: reset device
>> [    1.442053] xen-pciback 0000:0a:00.1: PCI INT A disabled
>> [    1.442058] xen-pciback 0000:0a:00.0: initializing...
>> [    1.442060] xen-pciback 0000:0a:00.0: initializing config
>> [    1.442062] xen-pciback 0000:0a:00.0: initializing virtual configuration 
>> space
>> [    1.442064] xen-pciback 0000:0a:00.0: added config field at offset 0x00
>> [    1.442066] xen-pciback 0000:0a:00.0: added config field at offset 0x02
>> [    1.442067] xen-pciback 0000:0a:00.0: added config field at offset 0x04
>> [    1.442069] xen-pciback 0000:0a:00.0: added config field at offset 0x3c
>> [    1.442071] xen-pciback 0000:0a:00.0: added config field at offset 0x3d
>> [    1.442073] xen-pciback 0000:0a:00.0: added config field at offset 0x0c
>> [    1.442075] xen-pciback 0000:0a:00.0: added config field at offset 0x0d
>> [    1.442077] xen-pciback 0000:0a:00.0: added config field at offset 0x0f
>> [    1.442079] xen-pciback 0000:0a:00.0: added config field at offset 0x10
>> [    1.442081] xen-pciback 0000:0a:00.0: added config field at offset 0x14
>> [    1.442083] xen-pciback 0000:0a:00.0: added config field at offset 0x18
>> [    1.442085] xen-pciback 0000:0a:00.0: added config field at offset 0x1c
>> [    1.442094] xen-pciback 0000:0a:00.0: added config field at offset 0x20
>> [    1.442098] xen-pciback 0000:0a:00.0: added config field at offset 0x24
>> [    1.442100] xen-pciback 0000:0a:00.0: added config field at offset 0x30
>> [    1.442127] xen-pciback 0000:0a:00.0: Found capability 0x1 at 0x78
>> [    1.442129] xen-pciback 0000:0a:00.0: added config field at offset 0x78
>> [    1.442131] xen-pciback 0000:0a:00.0: added config field at offset 0x7a
>> [    1.442135] xen-pciback 0000:0a:00.0: added config field at offset 0x7c
>> [    1.442137] xen-pciback 0000:0a:00.0: added config field at offset 0x7e
>> [    1.442138] xen-pciback 0000:0a:00.0: added config field at offset 0x7f
>> [    1.442140] xen-pciback 0000:0a:00.0: enabling device
>> [    1.442146] xen: registering gsi 28 triggering 0 polarity 1
>> [    1.442149] xen_map_pirq_gsi: returning irq 28 for gsi 28
>> [    1.442152] xen: --> pirq=28 -> irq=28
>> [    1.442153] Already setup the GSI :28
>> [    1.442156] xen-pciback 0000:0a:00.0: PCI INT A -> GSI 28 (level, low) -> 
>> IRQ 28
>> [    1.442159] xen-pciback 0000:0a:00.0: reset device
>> [    1.442165] xen-pciback 0000:0a:00.0: PCI INT A disabled
>> [    1.442406] xen: registering gsi 24 triggering 0 polarity 1
>> [    1.442412] xen: --> pirq=24 -> irq=24
>> [    1.442427] nvidiafb 0000:0b:00.0: PCI INT A -> GSI 24 (level, low) -> 
>> IRQ 24
>> [    1.445962] nvidiafb: Device ID: 10de06e4 
>> [    1.445965] nvidiafb: unknown NV_ARCH
>> [    1.448769] usbcore: registered new interface driver udlfb
>> [    1.448824] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
>> [    1.448828] vesafb: scrolling: redraw
>> [    1.448830] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>> [    1.451158] vesafb: framebuffer at 0xfb000000, mapped to 
>> 0xffffc90011180000, using 10240k, total 14336k
>> [    1.474590] Console: switching to colour frame buffer device 160x64
>> [    1.496896] fb0: VESA VGA frame buffer device
>> [    1.497279] input: Power Button as 
>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>> [    1.497498] ACPI: Power Button [PWRB]
>> [    1.497694] input: Power Button as 
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>> [    1.497885] ACPI: Power Button [PWRF]
>> [    1.498353] ACPI: acpi_idle registered with cpuidle
>> [    1.498785] ACPI: CPU-1 (power states: C1[C1] C2[C2])
>> [    1.498979] ACPI: CPU-1 (power states: C1[C1] C2[C2])
>> [    1.499162] ACPI: CPU-1 (power states: C1[C1] C2[C2])
>> [    1.499370] ACPI: CPU-1 (power states: C1[C1] C2[C2])
>> [    1.499555] ACPI: CPU-1 (power states: C1[C1] C2[C2])
>> [    1.499776] ACPI: CPU-1 (power states: C1[C1] C2[C2])
>> [    1.787886] Event-channel device installed.
>> [    1.791583] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> [    2.137245] Non-volatile memory driver v1.3
>> [    2.137765] Linux agpgart interface v0.103
>> [    2.146896] brd: module loaded
>> [    2.195669] loop: module loaded
>> [    2.196640] ahci 0000:00:11.0: version 3.0
>> [    2.196653] xen: registering gsi 19 triggering 0 polarity 1
>> [    2.196669] xen: --> pirq=19 -> irq=19
>> [    2.196711] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>> [    2.197158] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf 
>> impl SATA mode
>> [    2.197355] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp 
>> pio slum part 
>> [    2.198890] scsi0 : ahci
>> [    2.199135] scsi1 : ahci
>> [    2.199348] scsi2 : ahci
>> [    2.199565] scsi3 : ahci
>> [    2.199826] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 
>> irq 343
>> [    2.200008] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 
>> irq 343
>> [    2.200198] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 
>> irq 343
>> [    2.200383] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 
>> irq 343
>> [    2.202047] e1000: Intel(R) PRO/1000 Network Driver - version 
>> 7.3.21-k8-NAPI
>> [    2.202218] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [    2.202444] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
>> [    2.202588] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>> [    2.202824] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
>> [    2.202983] Copyright (c) 2007-2011 Intel Corporation.
>> [    2.208685] Intel(R) Virtual Function Network Driver - version 1.0.8-k0
>> [    2.212679] Copyright (c) 2009 - 2010 Intel Corporation.
>> [    2.220509] tun: Universal TUN/TAP device driver, 1.6
>> [    2.224505] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
>> [    2.231841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>> [    2.235827] xen: registering gsi 46 triggering 0 polarity 1
>> [    2.237425] xen_map_pirq_gsi: returning irq 46 for gsi 46
>> [    2.241413] xen: --> pirq=46 -> irq=46
>> [    2.242991] Already setup the GSI :46
>> [    2.248141] r8169 0000:09:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
>> [    2.248141] r8169 0000:09:00.0: enabling Mem-Wr-Inval
>> [    2.248652] r8169 0000:09:00.0: setting latency timer to 64
>> [    2.254479] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 
>> 0xffffc90000022000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 344
>> [    2.260291] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>> [    2.266084] xen: registering gsi 51 triggering 0 polarity 1
>> [    2.266094] xen: --> pirq=51 -> irq=51
>> [    2.266119] r8169 0000:08:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
>> [    2.270032] r8169 0000:08:00.0: enabling Mem-Wr-Inval
>> [    2.271954] r8169 0000:08:00.0: setting latency timer to 64
>> [    2.272326] r8169 0000:08:00.0: eth1: RTL8168d/8111d at 
>> 0xffffc90000024000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 345
>> [    2.278386] console [netcon0] enabled
>> [    2.282377] netconsole: network logging started
>> [    2.290316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [    2.296210] xen: registering gsi 17 triggering 0 polarity 1
>> [    2.296219] xen: --> pirq=17 -> irq=17
>> [    2.296262] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> 
>> IRQ 17
>> [    2.302202] ehci_hcd 0000:00:12.2: enabling bus mastering
>> [    2.302207] ehci_hcd 0000:00:12.2: EHCI Host Controller
>> [    2.308273] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus 
>> number 1
>> [    2.314267] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 
>> EHCI dummy qh workaround
>> [    2.318223] QUIRK: Enable AMD PLL fix
>> [    2.318223] ehci_hcd 0000:00:12.2: debug port 1
>> [    2.318223] ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval
>> [    2.318223] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400
>> [    2.344207] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>> [    2.350073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> [    2.354052] usb usb1: New USB device strings: Mfr=3, Product=2, 
>> SerialNumber=1
>> [    2.354052] usb usb1: Product: EHCI Host Controller
>> [    2.354052] usb usb1: Manufacturer: Linux 
>> 3.0.0-rc3-xen-konrad-devel-next-20110621+ ehci_hcd
>> [    2.354052] usb usb1: SerialNumber: 0000:00:12.2
>> [    2.379208] hub 1-0:1.0: USB hub found
>> [    2.384841] hub 1-0:1.0: 5 ports detected
>> [    2.390461] xen: registering gsi 17 triggering 0 polarity 1
>> [    2.390466] xen_map_pirq_gsi: returning irq 17 for gsi 17
>> [    2.394355] xen: --> pirq=17 -> irq=17
>> [    2.396033] Already setup the GSI :17
>> [    2.400031] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> 
>> IRQ 17
>> [    2.407505] ehci_hcd 0000:00:13.2: enabling bus mastering
>> [    2.407511] ehci_hcd 0000:00:13.2: EHCI Host Controller
>> [    2.413491] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus 
>> number 2
>> [    2.419505] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 
>> EHCI dummy qh workaround
>> [    2.423462] ehci_hcd 0000:00:13.2: debug port 1
>> [    2.423462] ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval
>> [    2.423462] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800
>> [    2.448207] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>> [    2.448233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>> [    2.448235] usb usb2: New USB device strings: Mfr=3, Product=2, 
>> SerialNumber=1
>> [    2.448237] usb usb2: Product: EHCI Host Controller
>> [    2.448238] usb usb2: Manufacturer: Linux 
>> 3.0.0-rc3-xen-konrad-devel-next-20110621+ ehci_hcd
>> [    2.448240] usb usb2: SerialNumber: 0000:00:13.2
>> [    2.484926] hub 2-0:1.0: USB hub found
>> [    2.491060] hub 2-0:1.0: 5 ports detected
>> [    2.497138] xen: registering gsi 17 triggering 0 polarity 1
>> [    2.497142] xen_map_pirq_gsi: returning irq 17 for gsi 17
>> [    2.501036] xen: --> pirq=17 -> irq=17
>> [    2.503249] Already setup the GSI :17
>> [    2.507247] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> 
>> IRQ 17
>> [    2.515731] ehci_hcd 0000:00:16.2: enabling bus mastering
>> [    2.515737] ehci_hcd 0000:00:16.2: EHCI Host Controller
>> [    2.522117] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus 
>> number 3
>> [    2.524177] ata2: SATA link down (SStatus 0 SControl 300)
>> [    2.524241] ata4: SATA link down (SStatus 0 SControl 300)
>> [    2.541351] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 
>> EHCI dummy qh workaround
>> [    2.545307] ehci_hcd 0000:00:16.2: debug port 1
>> [    2.545307] ehci_hcd 0000:00:16.2: enabling Mem-Wr-Inval
>> [    2.545307] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00
>> [    2.572217] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
>> [    2.578619] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>> [    2.582591] usb usb3: New USB device strings: Mfr=3, Product=2, 
>> SerialNumber=1
>> [    2.582591] usb usb3: Product: EHCI Host Controller
>> [    2.596153] usb usb3: Manufacturer: Linux 
>> 3.0.0-rc3-xen-konrad-devel-next-20110621+ ehci_hcd
>> [    2.596153] usb usb3: SerialNumber: 0000:00:16.2
>> [    2.610831] hub 3-0:1.0: USB hub found
>> [    2.617186] hub 3-0:1.0: 4 ports detected
>> [    2.623660] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [    2.630054] xen: registering gsi 18 triggering 0 polarity 1
>> [    2.630067] xen: --> pirq=18 -> irq=18
>> [    2.630100] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> 
>> IRQ 18
>> [    2.636509] ohci_hcd 0000:00:12.0: OHCI Host Controller
>> [    2.642937] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus 
>> number 4
>> [    2.649311] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf98fb000
>> [    2.696210] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    2.704281] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    2.712528] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max 
>> UDMA/133
>> [    2.716235] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>> [    2.716243] usb usb4: New USB device strings: Mfr=3, Product=2, 
>> SerialNumber=1
>> [    2.716250] usb usb4: Product: OHCI Host Controller
>> [    2.716256] usb usb4: Manufacturer: Linux 
>> 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd
>> [    2.716263] usb usb4: SerialNumber: 0000:00:12.0
>> [    2.720214] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 
>> 31/32), AA
>> [    2.756673] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01110, max UDMA7
>> [    2.756820] hub 4-0:1.0: USB hub found
>> [    2.756826] hub 4-0:1.0: 5 ports detected
>> [    2.756897] xen: registering gsi 18 triggering 0 polarity 1
>> [    2.756902] xen_map_pirq_gsi: returning irq 18 for gsi 18
>> [    2.756903] xen: --> pirq=18 -> irq=18
>> [    2.756905] Already setup the GSI :18
>> [    2.756907] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> 
>> IRQ 18
>> [    2.756925] ohci_hcd 0000:00:13.0: OHCI Host Controller
>> [    2.757107] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus 
>> number 5
>> [    2.757147] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf98fc000
>> [    2.764219] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 
>> 31/32), AA
>> [    2.816149] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>> [    2.816152] usb usb5: New USB device strings: Mfr=3, Product=2, 
>> SerialNumber=1
>> [    2.816154] usb usb5: Product: OHCI Host Controller
>> [    2.816156] usb usb5: Manufacturer: Linux 
>> 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd
>> [    2.816157] usb usb5: SerialNumber: 0000:00:13.0
>> [    2.816407] hub 5-0:1.0: USB hub found
>> [    2.816416] hub 5-0:1.0: 5 ports detected
>> [    2.816488] xen: registering gsi 18 triggering 0 polarity 1
>> [    2.816492] xen_map_pirq_gsi: returning irq 18 for gsi 18
>> [    2.816494] xen: --> pirq=18 -> irq=18
>> [    2.816495] Already setup the GSI :18
>> [    2.816497] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> 
>> IRQ 18
>> [    2.816516] ohci_hcd 0000:00:14.5: OHCI Host Controller
>> [    2.816607] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus 
>> number 6
>> [    2.816658] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf98fd000
>> [    2.876131] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>> [    2.876134] usb usb6: New USB device strings: Mfr=3, Product=2, 
>> SerialNumber=1
>> [    2.876135] usb usb6: Product: OHCI Host Controller
>> [    2.876137] usb usb6: Manufacturer: Linux 
>> 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd
>> [    2.876139] usb usb6: SerialNumber: 0000:00:14.5
>> [    2.876388] hub 6-0:1.0: USB hub found
>> [    2.876395] hub 6-0:1.0: 2 ports detected
>> [    2.876464] xen: registering gsi 18 triggering 0 polarity 1
>> [    2.876468] xen_map_pirq_gsi: returning irq 18 for gsi 18
>> [    2.876470] xen: --> pirq=18 -> irq=18
>> [    2.876471] Already setup the GSI :18
>> [    2.876473] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> 
>> IRQ 18
>> [    2.876489] ohci_hcd 0000:00:16.0: OHCI Host Controller
>> [    2.876566] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus 
>> number 7
>> [    2.876617] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf98fe000
>> [    2.936130] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>> [    2.936133] usb usb7: New USB device strings: Mfr=3, Product=2, 
>> SerialNumber=1
>> [    2.936135] usb usb7: Product: OHCI Host Controller
>> [    2.936136] usb usb7: Manufacturer: Linux 
>> 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd
>> [    2.936138] usb usb7: SerialNumber: 0000:00:16.0
>> [    2.936386] hub 7-0:1.0: USB hub found
>> [    2.936392] hub 7-0:1.0: 4 ports detected
>> [    2.936522] uhci_hcd: USB Universal Host Controller Interface driver
>> [    2.936723] usbcore: registered new interface driver usblp
>> [    2.936724] Initializing USB Mass Storage driver...
>> [    2.936794] usbcore: registered new interface driver usb-storage
>> [    2.936795] USB Mass Storage support registered.
>> [    2.936866] usbcore: registered new interface driver libusual
>> [    2.936989] usbcore: registered new interface driver usbserial
>> [    2.936990] usbserial: USB Serial Driver core
>> [    2.937048] USB Serial support registered for pl2303
>> [    2.937110] usbcore: registered new interface driver pl2303
>> [    2.937111] pl2303: Prolific PL2303 USB to serial adaptor driver
>> [    2.937347] i8042: PNP: No PS/2 controller found. Probing ports directly.
>> [    3.091945] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [    3.092094] ata1.00: configured for UDMA/133
>> [    3.092217] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72202 
>> JKAO PQ: 0 ANSI: 5
>> [    3.092769] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 
>> TB/1.81 TiB)
>> [    3.092834] sd 0:0:0:0: [sda] Write Protect is off
>> [    3.092836] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [    3.092861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
>> doesn't support DPO or FUA
>> [    3.092983] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [    3.098259] ata3.00: configured for UDMA/133
>> [    3.098342] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  
>> 1AA0 PQ: 0 ANSI: 5
>> [    3.098595] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 
>> TB/931 GiB)
>> [    3.098656] sd 2:0:0:0: [sdb] Write Protect is off
>> [    3.098658] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>> [    3.098681] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
>> doesn't support DPO or FUA
>> [    3.098865] sd 2:0:0:0: Attached scsi generic sg1 type 0
>> [    3.100428]  sda: sda1 sda2
>> [    3.102103]  sdb: sdb1
>> [    3.095779] serio: i8042 AUX port at 0x60,0x64 irq 12
>> [    3.190327] sd 2:0:0:0: [sdb] Attached SCSI disk
>> [    3.190335] mousedev: PS/2 mouse device common for all mice
>> [    3.190600] sd 0:0:0:0: [sda] Attached SCSI disk
>> [    3.190674] rtc_cmos 00:04: RTC can wake from S4
>> [    3.190986] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>> [    3.191044] rtc0: alarms up to one month, y3k, 114 bytes nvram
>> [    3.191323] lirc_dev: IR Remote Control driver registered, major 251 
>> [    3.191325] IR NEC protocol handler initialized
>> [    3.191326] IR RC5(x) protocol handler initialized
>> [    3.191328] IR RC6 protocol handler initialized
>> [    3.191329] IR JVC protocol handler initialized
>> [    3.191330] IR Sony protocol handler initialized
>> [    3.191331] IR RC5 (streamzap) protocol handler initialized
>> [    3.191332] IR LIRC bridge handler initialized
>> [    3.191334] Linux video capture interface: v2.00
>> [    3.191451] i2c-core: driver [tuner] using legacy suspend method
>> [    3.191452] i2c-core: driver [tuner] using legacy resume method
>> [    3.191627] i2c-core: driver [msp3400] using legacy suspend method
>> [    3.191629] i2c-core: driver [msp3400] using legacy resume method
>> [    3.191926] usbcore: registered new interface driver em28xx
>> [    3.191927] em28xx driver loaded
>> [    3.192110] usbcore: registered new interface driver pvrusb2
>> [    3.192112] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 
>> Encoder/Tuner
>> [    3.192113] pvrusb2: Debug mask is 31 (0x1f)
>> [    3.192115] gspca: v2.13.0 registered
>> [    3.192181] usbcore: registered new interface driver uvcvideo
>> [    3.192182] USB Video Class driver (v1.1.0)
>> [    3.192399] f71882fg: Found f71889ed chip at 0x600, revision 16
>> [    3.192656] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode
>> [    3.192658] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode
>> [    3.192660] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode
>> [    3.193285] f71808e_wdt: Unrecognized Fintek device: 0909
>> [    3.193290] wdt: Xen WatchDog Timer Driver v0.01
>> [    3.193474] wdt: initialized (timeout=60s, nowayout=0)
>> [    3.193731] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: 
>> dm-devel@xxxxxxxxxx
>> [    3.193807] device-mapper: multipath: version 1.3.0 loaded
>> [    3.193809] device-mapper: multipath round-robin: version 1.0.0 loaded
>> [    3.193930] cpuidle: using governor ladder
>> [    3.193931] cpuidle: using governor menu
>> [    3.420056] usbcore: registered new interface driver usbhid
>> [    3.424141] usbhid: USB HID core driver
>> [    3.426304] usbcore: registered new interface driver snd-usb-audio
>> [    3.426306] ALSA device list:
>> [    3.426307]   No soundcards found.
>> [    3.426311] Netfilter messages via NETLINK v0.30.
>> [    3.426333] nf_conntrack version 0.5.0 (4446 buckets, 17784 max)
>> [    3.426552] ctnetlink v0.93: registering with nfnetlink.
>> [    3.426575] xt_time: kernel timezone is -0000
>> [    3.426578] ip_set: protocol 6
>> [    3.426641] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [    3.426693] TCP cubic registered
>> [    3.426695] NET: Registered protocol family 17
>> [    3.426714] Bridge firewalling registered
>> [    3.426718] Ebtables v2.0 registered
>> [    3.426753] Registering the dns_resolver key type
>> [    3.507185] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 
>> cpu cores) (version 2.20.00)
>> [    3.512627] powernow-k8: Core Performance Boosting: on.
>> [    3.518009] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects 
>> found.
>> [    3.518010] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
>> [    3.529308] Freeing unused kernel memory: 812k freed
>> [    4.571229] EXT4-fs (dm-0): Ignoring delalloc option - requested data 
>> journaling mode
>> [    4.578894] EXT4-fs (dm-0): mounted filesystem with journalled data mode. 
>> Opts: (null)
>> [    6.150024] udev[2171]: starting version 164
>> [    7.168170] ata1.00: configured for UDMA/133
>> [    7.172081] ata1: EH complete
>> [    7.597633] ata1.00: configured for UDMA/133
>> [    7.597647] ata1: EH complete
>> [    8.236925] EXT4-fs (dm-0): warning: maximal mount count reached, running 
>> e2fsck is recommended
>> [    8.237497] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro
>> [   13.097684] Adding 2097148k swap on /dev/mapper/serveerstertje-swap.  
>> Priority:-1 extents:1 across:2097148k 
>> [   13.554821] EXT4-fs (sda1): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [   15.410434] r8169 0000:08:00.0: eth1: unable to load firmware patch 
>> rtl_nic/rtl8168d-1.fw (-2)
>> [   15.428020] r8169 0000:08:00.0: eth1: link down
>> [   15.428076] r8169 0000:08:00.0: eth1: link down
>> [   15.527798] r8169 0000:09:00.0: eth0: unable to load firmware patch 
>> rtl_nic/rtl8168d-1.fw (-2)
>> [   15.543183] r8169 0000:09:00.0: eth0: link down
>> [   15.544083] r8169 0000:09:00.0: eth0: link down
>> [   17.031497] r8169 0000:08:00.0: eth1: link up
>> [   17.199037] r8169 0000:09:00.0: eth0: link up
>> [   32.907488] sshd (4319): /proc/4319/oom_adj is deprecated, please use 
>> /proc/4319/oom_score_adj instead.
>> [   33.541899] EXT4-fs (dm-2): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [   34.018583] EXT4-fs (dm-3): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [   34.445424] EXT4-fs (dm-4): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [   34.803108] EXT4-fs (dm-5): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [  162.652515] FW: ipmasq, Input .. EoC: IN=eth0 OUT= 
>> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 
>> DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=13832 PROTO=2 
>> [  213.659087] EXT4-fs (dm-6): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [  214.106619] EXT4-fs (dm-9): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [  214.347365] EXT4-fs (sdb1): mounted filesystem with ordered data mode. 
>> Opts: barrier=1,errors=remount-ro
>> [  217.920297] XENBUS: Unable to read cpu state
>> [  217.932479] XENBUS: Unable to read cpu state
>> [  217.944730] XENBUS: Unable to read cpu state
>> [  217.944844] XENBUS: Unable to read cpu state
>> [  217.944940] XENBUS: Unable to read cpu state
>> [  217.945050] XENBUS: Unable to read cpu state
>> [  229.523485] device vif1.0 entered promiscuous mode
>> [  231.944473] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  232.153879] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  232.259827] xen-blkback:ring-ref 10, event-channel 11, protocol 1 
>> (x86_64-abi)
>> [  232.902140] xen_bridge: port 1(vif1.0) entering forwarding state
>> [  232.905348] xen_bridge: port 1(vif1.0) entering forwarding state
>> [  239.408752] device vif2.0 entered promiscuous mode
>> [  242.322700] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  242.562785] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  243.784306] xen_bridge: port 2(vif2.0) entering forwarding state
>> [  243.788066] xen_bridge: port 2(vif2.0) entering forwarding state
>> [  247.964178] xen_bridge: port 1(vif1.0) entering forwarding state
>> [  250.548012] device vif3.0 entered promiscuous mode
>> [  253.610695] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  253.735683] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  254.622553] xen_bridge: port 3(vif3.0) entering forwarding state
>> [  254.625759] xen_bridge: port 3(vif3.0) entering forwarding state
>> [  258.816124] xen_bridge: port 2(vif2.0) entering forwarding state
>> [  261.592908] device vif4.0 entered promiscuous mode
>> [  263.384753] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  263.468603] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  264.197139] xen_bridge: port 4(vif4.0) entering forwarding state
>> [  264.200059] xen_bridge: port 4(vif4.0) entering forwarding state
>> [  269.660240] xen_bridge: port 3(vif3.0) entering forwarding state
>> [  273.169829] device vif5.0 entered promiscuous mode
>> [  275.015314] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  275.145217] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  275.658673] xen_bridge: port 5(vif5.0) entering forwarding state
>> [  275.661863] xen_bridge: port 5(vif5.0) entering forwarding state
>> [  279.228210] xen_bridge: port 4(vif4.0) entering forwarding state
>> [  284.415438] device vif6.0 entered promiscuous mode
>> [  286.468851] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  286.654135] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  287.308702] xen_bridge: port 6(vif6.0) entering forwarding state
>> [  287.312057] xen_bridge: port 6(vif6.0) entering forwarding state
>> [  290.716210] xen_bridge: port 5(vif5.0) entering forwarding state
>> [  300.902413] device vif7.0 entered promiscuous mode
>> [  302.364251] xen_bridge: port 6(vif6.0) entering forwarding state
>> [  312.982077] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  313.179118] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  313.875211] xen_bridge: port 7(vif7.0) entering forwarding state
>> [  313.876074] xen_bridge: port 7(vif7.0) entering forwarding state
>> [  322.741232] device vif8.0 entered promiscuous mode
>> [  324.824217] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  324.949602] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  325.667899] xen_bridge: port 8(vif8.0) entering forwarding state
>> [  325.671098] xen_bridge: port 8(vif8.0) entering forwarding state
>> [  328.924159] xen_bridge: port 7(vif7.0) entering forwarding state
>> [  338.580923] device vif9.0 entered promiscuous mode
>> [  340.700239] xen_bridge: port 8(vif8.0) entering forwarding state
>> [  340.782370] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  340.899011] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  341.557031] xen_bridge: port 9(vif9.0) entering forwarding state
>> [  341.560235] xen_bridge: port 9(vif9.0) entering forwarding state
>> [  356.572104] xen_bridge: port 9(vif9.0) entering forwarding state
>> [  358.631884] device vif11.0 entered promiscuous mode
>> [  360.401663] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  360.522579] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  361.115003] xen_bridge: port 10(vif11.0) entering forwarding state
>> [  361.118165] xen_bridge: port 10(vif11.0) entering forwarding state
>> [  376.160100] xen_bridge: port 10(vif11.0) entering forwarding state
>> [  377.209284] device vif13.0 entered promiscuous mode
>> [  380.043674] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  380.354429] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  380.785800] xen_bridge: port 11(vif13.0) entering forwarding state
>> [  380.788923] xen_bridge: port 11(vif13.0) entering forwarding state
>> [  395.804239] xen_bridge: port 11(vif13.0) entering forwarding state
>> [  413.861145] device vif15.0 entered promiscuous mode
>> [  415.844683] xen-blkback:ring-ref 8, event-channel 9, protocol 1 
>> (x86_64-abi)
>> [  416.010567] xen-blkback:ring-ref 9, event-channel 10, protocol 1 
>> (x86_64-abi)
>> [  416.780539] vpn_bridge: port 1(vif15.0) entering forwarding state
>> [  416.784072] vpn_bridge: port 1(vif15.0) entering forwarding state
>> [  427.159777] device vif16.0 entered promiscuous mode
>> [  429.265322] xen-blkback:ring-ref 8, event-channel 15, protocol 1 
>> (x86_64-abi)
>> [  429.447366] xen-blkback:ring-ref 9, event-channel 16, protocol 1 
>> (x86_64-abi)
>> [  429.943319] xen_bridge: port 12(vif16.0) entering forwarding state
>> [  429.946370] xen_bridge: port 12(vif16.0) entering forwarding state
>> [  431.836090] vpn_bridge: port 1(vif15.0) entering forwarding state
>> [  441.672019] device vif17.0 entered promiscuous mode
>> [  444.956134] xen_bridge: port 12(vif16.0) entering forwarding state
>> [  446.169790] xen-blkback:ring-ref 8, event-channel 21, protocol 1 
>> (x86_64-abi)
>> [  446.247533] xen-blkback:ring-ref 9, event-channel 22, protocol 1 
>> (x86_64-abi)
>> [  448.162864] xen_bridge: port 13(vif17.0) entering forwarding state
>> [  448.164073] xen_bridge: port 13(vif17.0) entering forwarding state
>> [  463.196187] xen_bridge: port 13(vif17.0) entering forwarding state
>> [  662.929628] FW: ipmasq, Input .. EoC: IN=eth0 OUT= 
>> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 
>> DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=16171 PROTO=2 
>> [  687.860639] FW: ipmasq, Forward .. EoC: IN=eth0 OUT=eth0 
>> MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=10.150.1.1 
>> DST=10.170.103.116 LEN=200 TOS=0x00 PREC=0x00 TTL=249 ID=52178 PROTO=UDP 
>> SPT=21314 DPT=8000 LEN=180 
>> [  787.967919] FW: ipmasq, Input .. EoC: IN=eth0 OUT= 
>> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 
>> DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=16865 PROTO=2 
>> [  912.973001] FW: ipmasq, Input .. EoC: IN=eth0 OUT= 
>> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 
>> DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=17268 PROTO=2 
>> [ 1038.008089] FW: ipmasq, Input .. EoC: IN=eth0 OUT= 
>> MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 
>> DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=17781 PROTO=2 

>> 00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only 
>> single slot PCI-e GFX Hydra part [1002:5a11] (rev 02)
>>       Subsystem: ATI Technologies Inc RD890 Northbridge only single slot 
>> PCI-e GFX Hydra part [1002:5a11]
>>       Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort+ >SERR- <PERR- INTx-
>>       Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [c4] HyperTransport: Slave or Primary Interface
>>               Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
>>               Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>>               Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
>> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>>               Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>>               Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
>> DwFcInEn- LWO=8bit DwFcOutEn-
>>               Revision ID: 3.00
>>               Link Frequency 0: [b]
>>               Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>>               Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
>>               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
>>               Link Frequency 1: 200MHz
>>               Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>>               Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
>> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>>               Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- 
>> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>>               Prefetchable memory behind bridge Upper: 00-00
>>               Bus Number: 00
>>       Capabilities: [40] HyperTransport: Retry Mode
>>       Capabilities: [54] HyperTransport: UnitID Clumping
>>       Capabilities: [9c] HyperTransport: #1a
>>       Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
>>               Address: 00000000  Data: 0000
>> 
>> 00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device 
>> [1002:5a23]
>>       Subsystem: ATI Technologies Inc Device [1002:5a23]
>>       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0
>>       Interrupt: pin A routed to IRQ 10
>>       Capabilities: [40] Secure device <?>
>>       Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>               Address: 00000000fee0100c  Data: 4128
>>       Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
>> 
>> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI 
>> express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
>>       I/O behind bridge: 0000e000-0000efff
>>       Memory behind bridge: fa000000-fe9fffff
>>       Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency 
>> L0 <1us, L1 <8us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ 
>> DLActive+ BWMgmt+ ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #1, PowerLimit 25.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
>> Interlock-
>>                       Changed: MRL- PresDet+ LinkState+
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
>> Selectable De-emphasis: -3.5dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -3.5dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>               Address: fee0100c  Data: 41c0
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Capabilities: [190 v1] Access Control Services
>>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans+
>>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans-
>>       Kernel driver in use: pcieport
>> 
>> 00:03.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI 
>> express gpp port C) [1002:5a17] (prog-if 00 [Normal decode])
>>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
>>       I/O behind bridge: 0000f000-00000fff
>>       Memory behind bridge: f9f00000-f9ffffff
>>       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency 
>> L0 <1us, L1 <8us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive+ BWMgmt+ ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #3, PowerLimit 11.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
>> Interlock-
>>                       Changed: MRL- PresDet+ LinkState+
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
>> Selectable De-emphasis: -3.5dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -3.5dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>               Address: fee0100c  Data: 41c8
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Capabilities: [190 v1] Access Control Services
>>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans+
>>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans-
>>       Kernel driver in use: pcieport
>> 
>> 00:05.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI 
>> express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
>>       I/O behind bridge: 0000d000-0000dfff
>>       Memory behind bridge: f9e00000-f9efffff
>>       Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency 
>> L0 <1us, L1 <8us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive+ BWMgmt+ ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #5, PowerLimit 75.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
>> Interlock-
>>                       Changed: MRL- PresDet+ LinkState+
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
>> Selectable De-emphasis: -3.5dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -3.5dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>               Address: fee0100c  Data: 41d0
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Capabilities: [190 v1] Access Control Services
>>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans+
>>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans-
>>       Kernel driver in use: pcieport
>> 
>> 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI 
>> express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>>       I/O behind bridge: 0000c000-0000cfff
>>       Memory behind bridge: f9d00000-f9dfffff
>>       Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency 
>> L0 <1us, L1 <8us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive+ BWMgmt+ ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #6, PowerLimit 75.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
>> Interlock-
>>                       Changed: MRL- PresDet+ LinkState+
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
>> Selectable De-emphasis: -3.5dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -3.5dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>               Address: fee0100c  Data: 41d8
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Capabilities: [190 v1] Access Control Services
>>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans+
>>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans-
>>       Kernel driver in use: pcieport
>> 
>> 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge 
>> (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
>>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
>>       I/O behind bridge: 0000f000-00000fff
>>       Memory behind bridge: f9c00000-f9cfffff
>>       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort+ <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
>> L0 <1us, L1 <8us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive+ BWMgmt- ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
>> Interlock-
>>                       Changed: MRL- PresDet+ LinkState+
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
>> SpeedDis-, Selectable De-emphasis: -6dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -6dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>               Address: fee0100c  Data: 4121
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Capabilities: [190 v1] Access Control Services
>>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans+
>>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans-
>>       Kernel driver in use: pcieport
>> 
>> 00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge 
>> (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>>       I/O behind bridge: 0000b000-0000bfff
>>       Memory behind bridge: f9b00000-f9bfffff
>>       Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency 
>> L0 <1us, L1 <8us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
>> DLActive+ BWMgmt+ ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #5, PowerLimit 75.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
>> Interlock-
>>                       Changed: MRL- PresDet+ LinkState+
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
>> Selectable De-emphasis: -3.5dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -3.5dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>               Address: fee0100c  Data: 4129
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Capabilities: [190 v1] Access Control Services
>>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans+
>>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans-
>>       Kernel driver in use: pcieport
>> 
>> 00:0d.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge 
>> (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
>>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>>       I/O behind bridge: 0000f000-00000fff
>>       Memory behind bridge: f9a00000-f9afffff
>>       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency 
>> L0 <1us, L1 <8us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive+ BWMgmt+ ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
>> Interlock-
>>                       Changed: MRL- PresDet+ LinkState+
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
>> Selectable De-emphasis: -3.5dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -3.5dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>               Address: fee0100c  Data: 4131
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Capabilities: [190 v1] Access Control Services
>>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans+
>>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ 
>> EgressCtrl- DirectTrans-
>>       Kernel driver in use: pcieport
>> 
>> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA 
>> Controller [IDE mode] [1002:4390] (rev 40) (prog-if 01 [AHCI 1.0])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin A routed to IRQ 343
>>       Region 0: I/O ports at 7000 [size=8]
>>       Region 1: I/O ports at 6000 [size=4]
>>       Region 2: I/O ports at 5000 [size=8]
>>       Region 3: I/O ports at 3000 [size=4]
>>       Region 4: I/O ports at 2000 [size=16]
>>       Region 5: Memory at f98ff000 (32-bit, non-prefetchable) [size=1K]
>>       Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+
>>               Address: 00000000fee2000c  Data: 41c1
>>       Capabilities: [70] SATA HBA v1.0 InCfgSpace
>>       Capabilities: [a4] PCI Advanced Features
>>               AFCap: TP+ FLR+
>>               AFCtrl: FLR-
>>               AFStatus: TP-
>>       Kernel driver in use: ahci
>> 
>> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 
>> Controller [1002:4397] (prog-if 10 [OHCI])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin A routed to IRQ 18
>>       Region 0: Memory at f98fb000 (32-bit, non-prefetchable) [size=4K]
>>       Kernel driver in use: ohci_hcd
>> 
>> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI 
>> Controller [1002:4396] (prog-if 20 [EHCI])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin B routed to IRQ 17
>>       Region 0: Memory at f98ff400 (32-bit, non-prefetchable) [size=256]
>>       Capabilities: [c0] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>               Bridge: PM- B3+
>>       Capabilities: [e4] Debug port: BAR=1 offset=00e0
>>       Kernel driver in use: ehci_hcd
>> 
>> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 
>> Controller [1002:4397] (prog-if 10 [OHCI])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin A routed to IRQ 18
>>       Region 0: Memory at f98fc000 (32-bit, non-prefetchable) [size=4K]
>>       Kernel driver in use: ohci_hcd
>> 
>> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI 
>> Controller [1002:4396] (prog-if 20 [EHCI])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin B routed to IRQ 17
>>       Region 0: Memory at f98ff800 (32-bit, non-prefetchable) [size=256]
>>       Capabilities: [c0] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>               Bridge: PM- B3+
>>       Capabilities: [e4] Debug port: BAR=1 offset=00e0
>>       Kernel driver in use: ehci_hcd
>> 
>> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller 
>> [1002:4385] (rev 41)
>>       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx+
>>       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 
>> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE 
>> Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0
>>       Interrupt: pin B routed to IRQ 0
>>       Region 0: I/O ports at 01f0 [size=8]
>>       Region 1: I/O ports at 03f4 [size=1]
>>       Region 2: I/O ports at 0170 [size=8]
>>       Region 3: I/O ports at 0374 [size=1]
>>       Region 4: I/O ports at ff00 [size=16]
>> 
>> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host 
>> controller [1002:439d] (rev 40)
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0
>> 
>> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge 
>> [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
>>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64
>>       Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
>>       I/O behind bridge: 0000a000-0000afff
>>       Memory behind bridge: fff00000-000fffff
>>       Prefetchable memory behind bridge: fff00000-000fffff
>>       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort+ <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> 
>> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 
>> Controller [1002:4399] (prog-if 10 [OHCI])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin C routed to IRQ 18
>>       Region 0: Memory at f98fd000 (32-bit, non-prefetchable) [size=4K]
>>       Kernel driver in use: ohci_hcd
>> 
>> 00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if 
>> 00 [Normal decode])
>>       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>>       I/O behind bridge: 0000f000-00000fff
>>       Memory behind bridge: fff00000-000fffff
>>       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
>> L1 <1us
>>                       ExtTag+ RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
>> Latency L0 <64ns, L1 <1us
>>                       ClockPM- Surprise- LLActRep+ BwNot+
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ 
>> DLActive- BWMgmt- ABWMgmt-
>>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
>> Surprise-
>>                       Slot #32, PowerLimit 75.000W; Interlock- NoCompl+
>>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
>> LinkChg-
>>                       Control: AttnInd Unknown, PwrInd Unknown, Power- 
>> Interlock-
>>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
>> Interlock-
>>                       Changed: MRL- PresDet- LinkState-
>>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
>> CRSVisible-
>>               RootCap: CRSVisible-
>>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>>               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
>>               DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
>>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
>> SpeedDis-, Selectable De-emphasis: -3.5dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -6dB
>>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>               Address: 00000000fee0100c  Data: 4139
>>       Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:0000]
>>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Kernel driver in use: pcieport
>> 
>> 00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 
>> Controller [1002:4397] (prog-if 10 [OHCI])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin A routed to IRQ 18
>>       Region 0: Memory at f98fe000 (32-bit, non-prefetchable) [size=4K]
>>       Kernel driver in use: ohci_hcd
>> 
>> 00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI 
>> Controller [1002:4396] (prog-if 20 [EHCI])
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 64, Cache Line Size: 64 bytes
>>       Interrupt: pin B routed to IRQ 17
>>       Region 0: Memory at f98ffc00 (32-bit, non-prefetchable) [size=256]
>>       Capabilities: [c0] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>               Bridge: PM- B3+
>>       Capabilities: [e4] Debug port: BAR=1 offset=00e0
>>       Kernel driver in use: ehci_hcd
>> 
>> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
>> Processor HyperTransport Configuration [1022:1200]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Capabilities: [80] HyperTransport: Host or Secondary Interface
>>               Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
>> <EOCErr- DUL-
>>               Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
>> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>>               Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
>> DwFcInEn- LWO=16bit DwFcOutEn-
>>               Revision ID: 3.00
>>               Link Frequency: [b]
>>               Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>>               Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
>>               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
>> UIDRD- ExtRS- UCnfE-
>> 
>> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
>> Processor Address Map [1022:1201]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 
>> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
>> Processor DRAM Controller [1022:1202]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 
>> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
>> Processor Miscellaneous Control [1022:1203]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Capabilities: [f0] Secure device <?>
>>       Kernel driver in use: k10temp
>> 
>> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
>> Processor Link Control [1022:1204]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 
>> 03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 
>> [13f6:0111] (rev 10)
>>       Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device 
>> [13f6:0111]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin A routed to IRQ 22
>>       Region 0: I/O ports at a800 [disabled] [size=256]
>>       Capabilities: [c0] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin A routed to IRQ 40
>>       Region 0: Memory at f9af8000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Capabilities: [100 v1] Virtual Channel
>>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>>               Arb:    Fixed- WRR32- WRR64- WRR128-
>>               Ctrl:   ArbSelect=Fixed
>>               Status: InProgress-
>>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>>                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>>                       Status: NegoPending- InProgress-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin A routed to IRQ 40
>>       Region 0: Memory at f9af9000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin B routed to IRQ 41
>>       Region 0: Memory at f9afa000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin B routed to IRQ 41
>>       Region 0: Memory at f9afb000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin C routed to IRQ 42
>>       Region 0: Memory at f9afc000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin C routed to IRQ 42
>>       Region 0: Memory at f9afd000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin D routed to IRQ 43
>>       Region 0: Memory at f9afe000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 04:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin D routed to IRQ 43
>>       Region 0: Memory at f9aff000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 05:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE 
>> [Radeon HD 3450] [1002:95c5] (prog-if 00 [VGA controller])
>>       Subsystem: ASUSTeK Computer Inc. Device [1043:01d4]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin A routed to IRQ 32
>>       Region 0: Memory at b0000000 (64-bit, prefetchable) [disabled] 
>> [size=256M]
>>       Region 2: Memory at f9be0000 (64-bit, non-prefetchable) [disabled] 
>> [size=64K]
>>       Region 4: I/O ports at b000 [disabled] [size=256]
>>       Expansion ROM at f9bc0000 [disabled] [size=128K]
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, 
>> L1 unlimited
>>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
>> Latency L0 <64ns, L1 <1us
>>                       ClockPM- Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
>> DLActive- BWMgmt- ABWMgmt-
>>               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
>> SpeedDis-, Selectable De-emphasis: -6dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -6dB
>>       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Kernel driver in use: xen-pciback
>> 
>> 05:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon 
>> HD 34xx Series] [1002:aa28]
>>       Subsystem: ASUSTeK Computer Inc. Device [1043:aa28]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin B routed to IRQ 33
>>       Region 0: Memory at f9bfc000 (64-bit, non-prefetchable) [disabled] 
>> [size=16K]
>>       Capabilities: [50] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, 
>> L1 unlimited
>>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
>> Latency L0 <64ns, L1 <1us
>>                       ClockPM- Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
>> DLActive- BWMgmt- ABWMgmt-
>>               DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
>> SpeedDis-, Selectable De-emphasis: -6dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -6dB
>>       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=010 <?>
>>       Kernel driver in use: xen-pciback
>> 
>> 06:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI 
>> Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
>>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Bus: primary=06, secondary=07, subordinate=07, sec-latency=64
>>       I/O behind bridge: 0000f000-00000fff
>>       Memory behind bridge: f9c00000-f9cfffff
>>       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>>       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort+ <SERR- <PERR-
>>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>       Capabilities: [50] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>               Bridge: PM- B3+
>>       Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device 
>> [0000:0000]
>>       Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
>>               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, 
>> L1 <64us
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ 
>> BrConfRtry-
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ 
>> TransPend-
>>               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
>> L0 <1us, L1 <16us
>>                       ClockPM- Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive- BWMgmt- ABWMgmt-
>>       Capabilities: [100 v1] Advanced Error Reporting
>>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>               AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
>> 
>> 07:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 
>> (prog-if 10 [OHCI])
>>       Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin A routed to IRQ 44
>>       Region 0: Memory at f9c00000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [40] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Kernel driver in use: xen-pciback
>> 
>> 07:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 
>> (prog-if 10 [OHCI])
>>       Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin B routed to IRQ 45
>>       Region 0: Memory at f9c01000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [40] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Kernel driver in use: xen-pciback
>> 
>> 07:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) 
>> (prog-if 20 [EHCI])
>>       Subsystem: Device [1838:1074]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin C routed to IRQ 46
>>       Region 0: Memory at f9c02000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [40] Power Management version 2
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>       Kernel driver in use: xen-pciback
>> 
>> 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
>> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Interrupt: pin A routed to IRQ 345
>>       Region 0: I/O ports at c800 [size=256]
>>       Region 2: Memory at cfeff000 (64-bit, prefetchable) [size=4K]
>>       Region 4: Memory at cfef8000 (64-bit, prefetchable) [size=16K]
>>       Expansion ROM at f9de0000 [disabled] [size=128K]
>>       Capabilities: [40] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>               Address: 00000000fee2000c  Data: 41d9
>>       Capabilities: [70] Express (v2) Endpoint, MSI 01
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
>> L1 <64us
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
>>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
>> TransPend-
>>               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
>> L0 <512ns, L1 <64us
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive- BWMgmt- ABWMgmt-
>>               DevCap2: Completion Timeout: Not Supported, TimeoutDis+
>>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
>> SpeedDis-, Selectable De-emphasis: -6dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -6dB
>>       Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
>>               Vector table: BAR=4 offset=00000000
>>               PBA: BAR=4 offset=00000800
>>       Capabilities: [cc] Vital Product Data
>>               Unknown small resource type 00, will not decode more.
>>       Capabilities: [100 v1] Advanced Error Reporting
>>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>               CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>>               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>>       Capabilities: [140 v1] Virtual Channel
>>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>>               Arb:    Fixed- WRR32- WRR64- WRR128-
>>               Ctrl:   ArbSelect=Fixed
>>               Status: InProgress-
>>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>>                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>>                       Status: NegoPending- InProgress-
>>       Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00
>>       Kernel driver in use: r8169
>> 
>> 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
>> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
>>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx+
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Interrupt: pin A routed to IRQ 344
>>       Region 0: I/O ports at d800 [size=256]
>>       Region 2: Memory at cffff000 (64-bit, prefetchable) [size=4K]
>>       Region 4: Memory at cfff8000 (64-bit, prefetchable) [size=16K]
>>       Expansion ROM at f9ee0000 [disabled] [size=128K]
>>       Capabilities: [40] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>               Address: 00000000fee2000c  Data: 41c9
>>       Capabilities: [70] Express (v2) Endpoint, MSI 01
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
>> L1 <64us
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
>>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
>> TransPend-
>>               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
>> L0 <512ns, L1 <64us
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
>> DLActive- BWMgmt- ABWMgmt-
>>               DevCap2: Completion Timeout: Not Supported, TimeoutDis+
>>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
>> SpeedDis-, Selectable De-emphasis: -6dB
>>                        Transmit Margin: Normal Operating Range, 
>> EnterModifiedCompliance- ComplianceSOS-
>>                        Compliance De-emphasis: -6dB
>>               LnkSta2: Current De-emphasis Level: -6dB
>>       Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
>>               Vector table: BAR=4 offset=00000000
>>               PBA: BAR=4 offset=00000800
>>       Capabilities: [cc] Vital Product Data
>>               Unknown small resource type 00, will not decode more.
>>       Capabilities: [100 v1] Advanced Error Reporting
>>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
>> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>               CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>>               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>>       Capabilities: [140 v1] Virtual Channel
>>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>>               Arb:    Fixed- WRR32- WRR64- WRR128-
>>               Ctrl:   ArbSelect=Fixed
>>               Status: InProgress-
>>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>>                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>>                       Status: NegoPending- InProgress-
>>       Capabilities: [160 v1] Device Serial Number 04-00-00-00-68-4c-e0-00
>>       Kernel driver in use: r8169
>> 
>> 0a:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin A routed to IRQ 28
>>       Region 0: Memory at f9ff8000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Capabilities: [100 v1] Virtual Channel
>>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>>               Arb:    Fixed- WRR32- WRR64- WRR128-
>>               Ctrl:   ArbSelect=Fixed
>>               Status: InProgress-
>>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>>                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>>                       Status: NegoPending- InProgress-
>>       Kernel driver in use: xen-pciback
>> 
>> 0a:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin A routed to IRQ 28
>>       Region 0: Memory at f9ff9000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 0a:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin B routed to IRQ 29
>>       Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 0a:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin B routed to IRQ 29
>>       Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 0a:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin C routed to IRQ 30
>>       Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 0a:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin C routed to IRQ 30
>>       Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 0a:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin D routed to IRQ 31
>>       Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 0a:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port 
>> USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
>>       Subsystem: Device [a000:4000]
>>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR- FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Interrupt: pin D routed to IRQ 31
>>       Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [disabled] 
>> [size=4K]
>>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Power Management version 3
>>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [80] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
>> unlimited, L1 unlimited
>>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, 
>> Latency L0 <64ns, L1 unlimited
>>                       ClockPM+ Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- 
>> DLActive- BWMgmt- ABWMgmt-
>>       Kernel driver in use: xen-pciback
>> 
>> 0b:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 
>> 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA controller])
>>       Subsystem: ASUSTeK Computer Inc. Device [1043:8266]
>>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
>> Stepping- SERR+ FastB2B- DisINTx-
>>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>       Latency: 0, Cache Line Size: 64 bytes
>>       Interrupt: pin A routed to IRQ 24
>>       Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>>       Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>>       Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
>>       Region 5: I/O ports at e800 [size=128]
>>       Expansion ROM at fe9e0000 [disabled] [size=128K]
>>       Capabilities: [60] Power Management version 3
>>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>>       Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>>               Address: 0000000000000000  Data: 0000
>>       Capabilities: [78] Express (v1) Endpoint, MSI 00
>>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, 
>> L1 <4us
>>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
>>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
>> TransPend-
>>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
>> Latency L0 <512ns, L1 <1us
>>                       ClockPM- Surprise- LLActRep- BwNot-
>>               LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- 
>> CommClk+
>>                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ 
>> DLActive- BWMgmt- ABWMgmt-
>>       Capabilities: [100 v1] Virtual Channel
>>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>>               Arb:    Fixed- WRR32- WRR64- WRR128-
>>               Ctrl:   ArbSelect=Fixed
>>               Status: InProgress-
>>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>>                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>>                       Status: NegoPending- InProgress-
>>       Capabilities: [128 v1] Power Budgeting <?>
>>       Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 
>> Len=024 <?>
>> 

>> 00
>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> (XEN) Processor #0 0:10 APIC version 16
>> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>> (XEN) Processor #1 0:10 APIC version 16
>> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>> (XEN) Processor #2 0:10 APIC version 16
>> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>> (XEN) Processor #3 0:10 APIC version 16
>> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
>> (XEN) Processor #4 0:10 APIC version 16
>> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>> (XEN) Processor #5 0:10 APIC version 16
>> (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
>> (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
>> (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
>> (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> (XEN) ACPI: IRQ0 used by override.
>> (XEN) ACPI: IRQ2 used by override.
>> (XEN) ACPI: IRQ9 used by override.
>> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
>> (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
>> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>> (XEN) PCI: Not using MMCONFIG.
>> (XEN) Table is not found!
>> (XEN) Using ACPI (MADT) for SMP configuration information
>> (XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
>> (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
>> (XEN) mapped IOAPIC to ffff82c3ffffc000 (fec20000)
>> (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X
>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>> (XEN) Detected 3200.185 MHz processor.
>> (XEN) Initing memory sharing.
>> (XEN) AMD Fam10h machine check reporting enabled
>> (XEN) AMD-Vi: Found MSI capability block 
>> (XEN) AMD-Vi: ACPI Table:
>> (XEN) AMD-Vi:  Signature IVRS
>> (XEN) AMD-Vi:  Length 0x100
>> (XEN) AMD-Vi:  Revision 0x1
>> (XEN) AMD-Vi:  CheckSum 0xc3
>> (XEN) AMD-Vi:  OEM_Id AMD  
>> (XEN) AMD-Vi:  OEM_Table_Id RD890S
>> (XEN) AMD-Vi:  OEM_Revision 0x202031
>> (XEN) AMD-Vi:  Creator_Id AMD 
>> (XEN) AMD-Vi:  Creator_Revision 0x0
>> (XEN) AMD-Vi: IVRS Block:
>> (XEN) AMD-Vi:  Type 0x10
>> (XEN) AMD-Vi:  Flags 0x3e
>> (XEN) AMD-Vi:  Length 0xd0
>> (XEN) AMD-Vi:  Dev_Id 0x2
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x3
>> (XEN) AMD-Vi:  Dev_Id 0x0
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0x0 -> 0x2
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x10
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xb00
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x18
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x3
>> (XEN) AMD-Vi:  Dev_Id 0xa00
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0xa00 -> 0xa07
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x28
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x900
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x30
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x800
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x50
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x600
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x0
>> (XEN) AMD-Vi:  Dev_Id 0x0
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x43
>> (XEN) AMD-Vi:  Dev_Id 0x708
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0x708 -> 0x7ff
>> (XEN) AMD-Vi:  Dev_Id Alias: 0x700
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x58
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x3
>> (XEN) AMD-Vi:  Dev_Id 0x500
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0x500 -> 0x501
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x68
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x3
>> (XEN) AMD-Vi:  Dev_Id 0x400
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0x400 -> 0x407
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x88
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x3
>> (XEN) AMD-Vi:  Dev_Id 0x90
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0x90 -> 0x92
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x3
>> (XEN) AMD-Vi:  Dev_Id 0x98
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0x98 -> 0x9a
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xa0
>> (XEN) AMD-Vi:  Flags 0xd7
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xa1
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xa3
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xa4
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x43
>> (XEN) AMD-Vi:  Dev_Id 0x300
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0x300 -> 0x3ff
>> (XEN) AMD-Vi:  Dev_Id Alias: 0xa4
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xa5
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xa8
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0xa9
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x2
>> (XEN) AMD-Vi:  Dev_Id 0x100
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x3
>> (XEN) AMD-Vi:  Dev_Id 0xb0
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi:  Dev_Id Range: 0xb0 -> 0xb2
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x0
>> (XEN) AMD-Vi:  Dev_Id 0x0
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x48
>> (XEN) AMD-Vi:  Dev_Id 0x0
>> (XEN) AMD-Vi:  Flags 0xd7
>> (XEN) AMD-Vi: IVHD Device Entry:
>> (XEN) AMD-Vi:  Type 0x48
>> (XEN) AMD-Vi:  Dev_Id 0x0
>> (XEN) AMD-Vi:  Flags 0x0
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0000, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0001, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0002, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0010, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0018, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0028, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0030, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0050, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0058, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0068, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0088, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0090, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0091, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0092, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0098, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0099, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x009a, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00a0, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00a1, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00a3, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00a4, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00a5, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00a8, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00a9, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00b0, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00b1, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x00b2, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0100, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0400, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0401, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0402, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0403, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0404, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0405, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0406, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0407, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0500, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0501, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0600, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0700, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0800, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0900, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a00, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a01, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a02, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a03, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a04, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a05, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a06, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0a07, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: Add device table entry: device id = 0x0b00, interupt table = 
>> 0x24dec4000
>> (XEN) AMD-Vi: IOMMU 0 Enabled.
>> (XEN) I/O virtualisation enabled
>> (XEN)  - Dom0 mode: Relaxed
>> (XEN) Getting VERSION: 80050010
>> (XEN) Getting VERSION: 80050010
>> (XEN) Getting ID: 0
>> (XEN) Getting LVT0: 700
>> (XEN) Getting LVT1: 400
>> (XEN) enabled ExtINT on CPU#0
>> (XEN) ESR value before enabling vector: 0x00000004  after: 0x00000000
>> (XEN) ENABLING IO-APIC IRQs
>> (XEN)  -> Using new ACK method
>> (XEN) init IO_APIC IRQs
>> (XEN)  IO-APIC (apicid-pin) 6-0, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 
>> 6-23, 7-0, 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, 
>> 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 7-24, 
>> 7-25, 7-26, 7-27, 7-28, 7-29, 7-30, 7-31 not connected.
>> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
>> (XEN) number of MP IRQ sources: 15.
>> (XEN) number of IO-APIC #6 registers: 24.
>> (XEN) number of IO-APIC #7 registers: 32.
>> (XEN) testing the IO APIC.......................
>> (XEN) IO APIC #6......
>> (XEN) .... register #00: 06000000
>> (XEN) .......    : physical APIC id: 06
>> (XEN) .......    : Delivery Type: 0
>> (XEN) .......    : LTS          : 0
>> (XEN) .... register #01: 00178021
>> (XEN) .......     : max redirection entries: 0017
>> (XEN) .......     : PRQ implemented: 1
>> (XEN) .......     : IO APIC version: 0021
>> (XEN) .... register #02: 06000000
>> (XEN) .......     : arbitration: 06
>> (XEN) .... register #03: 07000000
>> (XEN) .......     : Boot DT    : 0
>> (XEN) .... IRQ redirection table:
>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>> (XEN)  01 001 01  0    0    0   0   0    1    1    30
>> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
>> (XEN)  03 001 01  0    0    0   0   0    1    1    38
>> (XEN)  04 001 01  0    0    0   0   0    1    1    F1
>> (XEN)  05 001 01  0    0    0   0   0    1    1    40
>> (XEN)  06 001 01  0    0    0   0   0    1    1    48
>> (XEN)  07 001 01  0    0    0   0   0    1    1    50
>> (XEN)  08 001 01  0    0    0   0   0    1    1    58
>> (XEN)  09 001 01  1    1    0   1   0    1    1    60
>> (XEN)  0a 001 01  0    0    0   0   0    1    1    68
>> (XEN)  0b 001 01  0    0    0   0   0    1    1    70
>> (XEN)  0c 001 01  0    0    0   0   0    1    1    78
>> (XEN)  0d 001 01  0    0    0   0   0    1    1    88
>> (XEN)  0e 001 01  0    0    0   0   0    1    1    90
>> (XEN)  0f 001 01  0    0    0   0   0    1    1    98
>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>> (XEN) IO APIC #7......
>> (XEN) .... register #00: 07000000
>> (XEN) .......    : physical APIC id: 07
>> (XEN) .......    : Delivery Type: 0
>> (XEN) .......    : LTS          : 0
>> (XEN) .... register #01: 001F8021
>> (XEN) .......     : max redirection entries: 001F
>> (XEN) .......     : PRQ implemented: 1
>> (XEN) .......     : IO APIC version: 0021
>> (XEN) .... register #02: 00000000
>> (XEN) .......     : arbitration: 00
>> (XEN) .... IRQ redirection table:
>> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
>> (XEN)  00 000 00  1    0    0   0   0    0    0    00
>> (XEN)  01 000 00  1    0    0   0   0    0    0    00
>> (XEN)  02 000 00  1    0    0   0   0    0    0    00
>> (XEN)  03 000 00  1    0    0   0   0    0    0    00
>> (XEN)  04 000 00  1    0    0   0   0    0    0    00
>> (XEN)  05 000 00  1    0    0   0   0    0    0    00
>> (XEN)  06 000 00  1    0    0   0   0    0    0    00
>> (XEN)  07 000 00  1    0    0   0   0    0    0    00
>> (XEN)  08 000 00  1    0    0   0   0    0    0    00
>> (XEN)  09 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
>> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
>> (XEN)  10 000 00  1    0    0   0   0    0    0    00
>> (XEN)  11 000 00  1    0    0   0   0    0    0    00
>> (XEN)  12 000 00  1    0    0   0   0    0    0    00
>> (XEN)  13 000 00  1    0    0   0   0    0    0    00
>> (XEN)  14 000 00  1    0    0   0   0    0    0    00
>> (XEN)  15 000 00  1    0    0   0   0    0    0    00
>> (XEN)  16 000 00  1    0    0   0   0    0    0    00
>> (XEN)  17 000 00  1    0    0   0   0    0    0    00
>> (XEN)  18 000 00  1    0    0   0   0    0    0    00
>> (XEN)  19 000 00  1    0    0   0   0    0    0    00
>> (XEN)  1a 000 00  1    0    0   0   0    0    0    00
>> (XEN)  1b 000 00  1    0    0   0   0    0    0    00
>> (XEN)  1c 000 00  1    0    0   0   0    0    0    00
>> (XEN)  1d 000 00  1    0    0   0   0    0    0    00
>> (XEN)  1e 000 00  1    0    0   0   0    0    0    00
>> (XEN)  1f 000 00  1    0    0   0   0    0    0    00
>> (XEN) Using vector-based indexing
>> (XEN) IRQ to pin mappings:
>> (XEN) IRQ240 -> 0:2
>> (XEN) IRQ48 -> 0:1
>> (XEN) IRQ56 -> 0:3
>> (XEN) IRQ241 -> 0:4
>> (XEN) IRQ64 -> 0:5
>> (XEN) IRQ72 -> 0:6
>> (XEN) IRQ80 -> 0:7
>> (XEN) IRQ88 -> 0:8
>> (XEN) IRQ96 -> 0:9
>> (XEN) IRQ104 -> 0:10
>> (XEN) IRQ112 -> 0:11
>> (XEN) IRQ120 -> 0:12
>> (XEN) IRQ136 -> 0:13
>> (XEN) IRQ144 -> 0:14
>> (XEN) IRQ152 -> 0:15
>> (XEN) .................................... done.
>> (XEN) Using local APIC timer interrupts.
>> (XEN) calibrating APIC timer ...
>> (XEN) ..... CPU clock speed is 3200.1583 MHz.
>> (XEN) ..... host bus clock speed is 200.0097 MHz.
>> (XEN) ..... bus_scale = 0x0000CCD7
>> (XEN) [2011-06-21 13:18:29] Platform timer is 14.318MHz HPET
>> (XEN) [2011-06-21 13:18:29] Allocated console ring of 64 KiB.
>> (XEN) [2011-06-21 13:18:29] HVM: ASIDs enabled.
>> (XEN) [2011-06-21 13:18:29] SVM: Supported advanced features:
>> (XEN) [2011-06-21 13:18:29]  - Nested Page Tables (NPT)
>> (XEN) [2011-06-21 13:18:29]  - Last Branch Record (LBR) Virtualisation
>> (XEN) [2011-06-21 13:18:29]  - Next-RIP Saved on #VMEXIT
>> (XEN) [2011-06-21 13:18:29]  - Pause-Intercept Filter
>> (XEN) [2011-06-21 13:18:29] HVM: SVM enabled
>> (XEN) [2011-06-21 13:18:29] HVM: Hardware Assisted Paging detected.
>> (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#1
>> (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#2
>> (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#3
>> (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#4
>> (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#5
>> (XEN) [2011-06-21 13:18:29] Brought up 6 CPUs
>> (XEN) [2011-06-21 13:18:29] HPET\047s MSI mode hasn\047t been supported when 
>> Interrupt Remapping is enabled.
>> (XEN) [2011-06-21 13:18:29] ACPI sleep modes: S3
>> (XEN) [2011-06-21 13:18:29] MCA: Use hw thresholding to adjust polling 
>> frequency
>> (XEN) [2011-06-21 13:18:29] mcheck_poll: Machine check polling timer started.
>> (XEN) [2011-06-21 13:18:29] Xenoprofile: Failed to setup IBS LVT offset, 
>> IBSCTL = 0xffffffff
>> (XEN) [2011-06-21 13:18:29] *** LOADING DOMAIN 0 ***
>> (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1000000 
>> memsz=0xa5d000
>> (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1a5d000 
>> memsz=0xc0d40
>> (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1b1e000 
>> memsz=0xd60
>> (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1b1f000 
>> memsz=0x12a80
>> (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1b32000 
>> memsz=0x2db000
>> (XEN) [2011-06-21 13:18:29] elf_parse_binary: memory: 0x1000000 -> 0x1e0d000
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: GUEST_OS = "linux"
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: GUEST_VERSION = "2.6"
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: XEN_VERSION = "xen-3.0"
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: VIRT_BASE = 
>> 0xffffffff80000000
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: ENTRY = 0xffffffff81b32200
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: HYPERCALL_PAGE = 
>> 0xffffffff81001000
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: FEATURES = 
>> "!writable_page_tables|pae_pgdir_above_4gb"
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: PAE_MODE = "yes"
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: LOADER = "generic"
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: unknown xen elf note (0xd)
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: SUSPEND_CANCEL = 0x1
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: HV_START_LOW = 
>> 0xffff800000000000
>> (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: PADDR_OFFSET = 0x0
>> (XEN) [2011-06-21 13:18:29] elf_xen_addr_calc_check: addresses:
>> (XEN) [2011-06-21 13:18:29]     virt_base        = 0xffffffff80000000
>> (XEN) [2011-06-21 13:18:29]     elf_paddr_offset = 0x0
>> (XEN) [2011-06-21 13:18:29]     virt_offset      = 0xffffffff80000000
>> (XEN) [2011-06-21 13:18:29]     virt_kstart      = 0xffffffff81000000
>> (XEN) [2011-06-21 13:18:29]     virt_kend        = 0xffffffff81e0d000
>> (XEN) [2011-06-21 13:18:29]     virt_entry       = 0xffffffff81b32200
>> (XEN) [2011-06-21 13:18:29]     p2m_base         = 0xffffffffffffffff
>> (XEN) [2011-06-21 13:18:29]  Xen  kernel: 64-bit, lsb, compat32
>> (XEN) [2011-06-21 13:18:29]  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 
>> -> 0x1e0d000
>> (XEN) [2011-06-21 13:18:29] PHYSICAL MEMORY ARRANGEMENT:
>> (XEN) [2011-06-21 13:18:29]  Dom0 alloc.:   
>> 0000000244000000->0000000248000000 (177718 pages to be allocated)
>> (XEN) [2011-06-21 13:18:29]  Init. ramdisk: 
>> 000000024f636000->0000000250000000
>> (XEN) [2011-06-21 13:18:29] VIRTUAL MEMORY ARRANGEMENT:
>> (XEN) [2011-06-21 13:18:29]  Loaded kernel: 
>> ffffffff81000000->ffffffff81e0d000
>> (XEN) [2011-06-21 13:18:29]  Init. ramdisk: 
>> ffffffff81e0d000->ffffffff827d7000
>> (XEN) [2011-06-21 13:18:29]  Phys-Mach map: 
>> ffffffff827d7000->ffffffff82957000
>> (XEN) [2011-06-21 13:18:29]  Start info:    
>> ffffffff82957000->ffffffff829574b4
>> (XEN) [2011-06-21 13:18:29]  Page tables:   
>> ffffffff82958000->ffffffff82971000
>> (XEN) [2011-06-21 13:18:29]  Boot stack:    
>> ffffffff82971000->ffffffff82972000
>> (XEN) [2011-06-21 13:18:29]  TOTAL:         
>> ffffffff80000000->ffffffff82c00000
>> (XEN) [2011-06-21 13:18:29]  ENTRY ADDRESS: ffffffff81b32200
>> (XEN) [2011-06-21 13:18:29] Dom0 has maximum 6 VCPUs
>> (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 
>> 0xffffffff81a5d000
>> (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 1 at 0xffffffff81a5d000 -> 
>> 0xffffffff81b1dd40
>> (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 2 at 0xffffffff81b1e000 -> 
>> 0xffffffff81b1ed60
>> (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 3 at 0xffffffff81b1f000 -> 
>> 0xffffffff81b31a80
>> (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 4 at 0xffffffff81b32000 -> 
>> 0xffffffff81bf0000
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0000, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0002, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0010, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0018, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0028, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0030, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0050, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0058, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0068, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0088, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0090, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0092, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0098, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x009a, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00a0, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00a1, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00a3, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00a4, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00a5, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00a8, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00b0, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x00b2, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.0
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.1
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.2
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.4
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0400, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0401, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0402, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0403, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0404, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0405, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0406, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0407, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0500, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0501, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0600, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0700, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0800, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0900, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a00, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a01, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a02, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a03, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a04, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a05, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a06, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0a07, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 
>> 0x0b00, root table = 0x24818a000, domain = 0, paging mode = 3
>> (XEN) [2011-06-21 13:18:30] Scrubbing Free RAM: 
>> .........................................................................done.
>> (XEN) [2011-06-21 13:18:32] Xen trace buffers: disabled
>> (XEN) [2011-06-21 13:18:32] Std. Loglevel: All
>> (XEN) [2011-06-21 13:18:32] Guest Loglevel: All
>> (XEN) [2011-06-21 13:18:32] Xen is relinquishing VGA console.
>> (XEN) [2011-06-21 13:18:32] *** Serial input -> DOM0 (type \047CTRL-a\047 
>> three times to switch input to Xen)
>> (XEN) [2011-06-21 13:18:32] Freed 216kB init memory.
>> (XEN) [2011-06-21 13:18:32] \047u\047 pressed -> dumping numa info 
>> (now-0x0:DE8FA4C8)
>> (XEN) [2011-06-21 13:18:32] idx0 -> NODE0 start->0 size->2424832
>> (XEN) [2011-06-21 13:18:32] phys_to_nid(0000000000001000) -> 0 should be 0
>> (XEN) [2011-06-21 13:18:32] CPU0 -> NODE0
>> (XEN) [2011-06-21 13:18:32] CPU1 -> NODE0
>> (XEN) [2011-06-21 13:18:32] CPU2 -> NODE0
>> (XEN) [2011-06-21 13:18:32] CPU3 -> NODE0
>> (XEN) [2011-06-21 13:18:32] CPU4 -> NODE0
>> (XEN) [2011-06-21 13:18:32] CPU5 -> NODE0
>> (XEN) [2011-06-21 13:18:32] Memory location of each domain:
>> (XEN) [2011-06-21 13:18:32] Domain 0 (total: 196608):
>> (XEN) [2011-06-21 13:18:32]     Node 0: 196608
>> (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-9 -> 0x60 -> 
>> IRQ 9 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:33] traps.c:2388:d0 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:00.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:02.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:03.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:05.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:06.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:0a.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:0b.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:0d.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:11.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:12.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:12.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:13.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:13.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:14.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:14.1
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:14.3
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:14.4
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:14.5
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:15.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:16.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:16.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:18.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:18.1
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:18.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:18.3
>> (XEN) [2011-06-21 13:18:33] PCI add device 00:18.4
>> (XEN) [2011-06-21 13:18:33] PCI add device 0b:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.1
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.3
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.4
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.5
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.6
>> (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.7
>> (XEN) [2011-06-21 13:18:33] PCI add device 09:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 08:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 06:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 07:01.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 07:01.1
>> (XEN) [2011-06-21 13:18:33] PCI add device 07:01.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 05:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 05:00.1
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.0
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.1
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.2
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.3
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.4
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.5
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.6
>> (XEN) [2011-06-21 13:18:33] PCI add device 04:00.7
>> (XEN) [2011-06-21 13:18:33] PCI add device 03:06.0
>> (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-8 -> 0x58 -> 
>> IRQ 8 Mode:0 Active:0)
>> (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-13 -> 0x88 
>> -> IRQ 13 Mode:0 Active:0)
>> (XEN) [2011-06-21 13:18:33] IOAPIC[1]: Set PCI routing entry (7-28 -> 0xa0 
>> -> IRQ 52 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:33] IOAPIC[1]: Set PCI routing entry (7-29 -> 0xa8 
>> -> IRQ 53 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:33] IOAPIC[1]: Set PCI routing entry (7-30 -> 0xb0 
>> -> IRQ 54 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-16 -> 0xb8 
>> -> IRQ 16 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[0]: Set PCI routing entry (6-22 -> 0x41 
>> -> IRQ 22 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-19 -> 0x49 
>> -> IRQ 43 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-18 -> 0x51 
>> -> IRQ 42 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-17 -> 0x59 
>> -> IRQ 41 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-16 -> 0x61 
>> -> IRQ 40 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-9 -> 0x69 -> 
>> IRQ 33 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-8 -> 0x71 -> 
>> IRQ 32 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-22 -> 0x79 
>> -> IRQ 46 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-21 -> 0x81 
>> -> IRQ 45 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-20 -> 0x89 
>> -> IRQ 44 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-7 -> 0x91 -> 
>> IRQ 31 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-6 -> 0x99 -> 
>> IRQ 30 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-5 -> 0xa1 -> 
>> IRQ 29 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-4 -> 0xa9 -> 
>> IRQ 28 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-0 -> 0xb1 -> 
>> IRQ 24 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:35] IOAPIC[0]: Set PCI routing entry (6-19 -> 0xb9 
>> -> IRQ 19 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:35] IOAPIC[1]: Set PCI routing entry (7-27 -> 0xd1 
>> -> IRQ 51 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:35] IOAPIC[0]: Set PCI routing entry (6-17 -> 0x22 
>> -> IRQ 17 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:18:35] IOAPIC[0]: Set PCI routing entry (6-18 -> 0x2a 
>> -> IRQ 18 Mode:1 Active:1)
>> (XEN) [2011-06-21 13:22:24] traps.c:2388:d1 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000787110fb4e0f to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:22:35] traps.c:2388:d2 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:22:46] traps.c:2388:d3 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000787110fb4e0f to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:22:56] traps.c:2388:d4 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:23:07] traps.c:2388:d5 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:23:19] traps.c:2388:d6 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:23:45] traps.c:2388:d7 Domain attempted WRMSR 
>> 00000000c0010004 from 0x00008076c0b94065 to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:23:57] traps.c:2388:d8 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:24:13] traps.c:2388:d9 Domain attempted WRMSR 
>> 00000000c0010004 from 0x000000b68e28229f to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:24:33] traps.c:2388:d11 Domain attempted WRMSR 
>> 00000000c0010004 from 0x00008076c0b94065 to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:24:52] traps.c:2388:d13 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:25:28] traps.c:2388:d15 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000787110fb4e0f to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:25:41] traps.c:2388:d16 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd.
>> (XEN) [2011-06-21 13:25:58] traps.c:2388:d17 Domain attempted WRMSR 
>> 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd.

>> host                   : serveerstertje
>> release                : 3.0.0-rc3-xen-konrad-devel-next-20110621+
>> version                : #2 SMP Tue Jun 21 14:03:13 CEST 2011
>> machine                : x86_64
>> nr_cpus                : 6
>> nr_nodes               : 1
>> cores_per_socket       : 6
>> threads_per_core       : 1
>> cpu_mhz                : 3200
>> hw_caps                : 
>> 178bf3ff:efd3fbff:00000000:00001310:00802001:00000000:000037ff:00000000
>> virt_caps              : hvm hvm_directio
>> total_memory           : 8191
>> free_memory            : 2954
>> free_cpus              : 0
>> xen_major              : 4
>> xen_minor              : 1
>> xen_extra              : .1
>> xen_caps               : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 
>> hvm-3.0-x86_32p hvm-3.0-x86_64 
>> xen_scheduler          : credit
>> xen_pagesize           : 4096
>> platform_params        : virt_start=0xffff800000000000
>> xen_changeset          : Tue Jun 14 14:02:48 2011 +0100 23079:73a8061b01f1
>> xen_commandline        : dom0_mem=768M loglvl=all loglvl_guest=all 
>> console_timestamps vga=gfx-1280x1024x32 cpuidle cpufreq=xen noreboot debug 
>> lapic=debug apic_verbosity=debug apic=debug acpi_enforce_resources=lax 
>> iommu=on,amd-iommu-debug amd_iommu=on amd-iommu-debug com1=115200,8n1 
>> console=vga,com1
>> cc_compiler            : gcc version 4.4.5 (Debian 4.4.5-8) 
>> cc_compile_by          : root
>> cc_compile_domain      : dyndns.org
>> cc_compile_date        : Thu Jun 16 11:28:46 CEST 2011
>> xend_config_format     : 4




-- 
Best regards,
 Sander                            mailto:linux@xxxxxxxxxxxxxx


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.