[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] xen 4.2 unstable; HVM; 2.6.39.3; HD/Network card error



hi stefanao,

i have you added loglevel=9 in grub

***
### BEGIN /etc/grub.d/08_xen ###
menuentry "Xen 4.2 Unstable / Debian Squeeze kernel 3.0.0" {
        insmod ext2
        insmod multiboot2
        insmod lvm
        insmod part_msdos
        insmod raid
        insmod mdraid
        set root='(md/1)'
        search --no-floppy --fs-uuid --set
8809ff98-9ce8-472a-9ae9-74b821fe5285
        echo 'Loading multiboot kernel ...'
        multiboot (md/1)/boot/xen.gz placeholder dom0_mem=1024M loglevel=9
        echo 'Loading initial kernel ...'
        module (md/1)/boot/vmlinuz-3.0.0 placeholder
root=UUID=8809ff98-9ce8-472a-9ae9-74b821fe5285 ro quiet console=tty0
nomodeset
        echo 'Loading initial ramdisk ...'
        module (md/1)/boot/initrd.img-3.0.0
}
### END /etc/grub.d/08_xen ###
***

and several log files attached to this email.

thanks a lot for your help,

walter.





-----Original Message-----
From: Stefano Stabellini [mailto:stefano.stabellini@xxxxxxxxxxxxx] 
Sent: Montag, 25. Juli 2011 12:43
To: Walter Robert Ditzler
Cc: Stefano Stabellini; konrad.wilk@xxxxxxxxxx;
xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-devel] xen 4.2 unstable; HVM; 2.6.39.3; HD/Network card
error

On Sun, 24 Jul 2011, Walter Robert Ditzler wrote:
> hi list members,
> 
> i had several problems with my new xen installations, 4.2 unstable 
> with
> 2.6.39-3 and hvm guests. I can finally say that almost all problems 
> have been gone :-) to  be honest I believe the kernels 2.6.39.1/2 and 
> 3 were the problem.
> 
> this weekend I used the mainline 3.0.0 kernel with an actual version 
> of xen
> 4.2 unstable, and here we go:
> 
> - booting of squeeze guests, ok (before hang on grub)
> - booting of win 7 x64 guests, ok
> - booting of win 2008r2 x64 guests, ok
> 
> the only little problem which has left is on squeeze guests.
> 
> the squeeze guest comes up until grub. but then it takes around 2 
> minutes until the squeeze guest installation continues to start up. 
> that would be really nice get to be solved in the near future.

Can you please add debug and loglevel=9 to the guest kernel command line
options and then post the output of the guest booting?
It might help to setup the guest to use the emulated serial.
Also it would be helpful if you could post the output of xenstore-ls run on
the host.

Attachment: dmesg
Description: Binary data

Attachment: lspci
Description: Binary data

Attachment: qemu-dm-server01.log
Description: Binary data

Attachment: qemu-dm-server01.log.until.it.started.to.hang.for.2.min
Description: Binary data

Attachment: server01.cfg
Description: Binary data

Attachment: xen-hotplug.log
Description: Binary data

Attachment: xenstore-ls
Description: Binary data

Attachment: xl_dmesg
Description: Binary data

Attachment: xl-server01.log
Description: Binary data

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.