> Date: Sat, 30 Jul 2011 11:37:11 -0400
> From: konrad.wilk@xxxxxxxxxx
> To: tinnycloud@xxxxxxxxxxx
> CC: mchan@xxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-devel] RE: bnx2 FTQ issues on 2.6.32 + xen 4.0.1;
>
> On Sat, Jul 30, 2011 at 11:27:24PM +0800, MaoXiaoyun wrote:
> >
> > I have below configuration in grub.conf, did u mean change 115200 to sth?
> >
> > iommu=off x2apic=off console=com1,vga com1=115200,8n1
>
> Hm, that is what I had in mind. That is not enough to get the data before your machine crashes?
>
> When it crashes - you mean the watchdog timer hits - so your machine is still functioninig right?
> Then you should be able to see the output of the driver in /var/log/messages,syslog I think?
>
Not really, the messages has the log same as the log print out in serial output.
So when log lost, lost in both messages and serial.
> You are still able to recover when the bnx drivers goes bonk, right?
Sometimes, not always, but when two much log need to print out, the log will lost.
> >
> > thanks.
> >
> >
> >
> > > Date: Sat, 30 Jul 2011 10:15:39 -0400
> > > From: konrad.wilk@xxxxxxxxxx
> > > To: tinnycloud@xxxxxxxxxxx
> > > CC: mchan@xxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
> > > Subject: Re: [Xen-devel] RE: bnx2 FTQ issues on 2.6.32 + xen 4.0.1;
> > >
> > > > > > I've spent more time on this.
> > > > > > It's easy to reproduce. I have two physical host, on top of which, totally start 15VMS, doing migrating over
> > > > > > and over again. Since xen live migration invovle large mount of memory copy, so I can see that the network is
> > > > > > saturated. About 16 hours later, the FTQ dump will show up.
> > > > > >
> > > > > > I've debugged more.
> > > > > > Below debug code is added when FTQ happens.
> > > > > > Does anyone know what is going on?
> > > > >
> > > > > No idea. Did Michael Chan send you a private email with some ideas?
> > > > >
> > > >
> > > > Yep, Michael give me some debug patch. But unfortunately, when this bug show up, there is no enough time for the
> > > > kernel to print all debugged log before it crashes.
> > >
> > > Can you use a serial console at a high baud rate?
> >
