|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH] Xen/PCI: support multi-segment systems
Now that the hypercall interface changes are in -unstable, make the
kernel side code not ignore the segment (aka domain) number anymore
(which results in pretty odd behavior on such systems). Rather, if
only the old interfaces are available, don't call them for devices on
non-zero segments at all.
The one thing I wasn't able to spot was a use of PHYSDEVOP_restore_msi
(which would also need to be changed), so if there is some other patch
in some tree that would be introducing this it ought to get adjusted
to try using PHYSDEVOP_restore_msi_ext first.
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
---
arch/x86/pci/xen.c | 22 ++++++++-
drivers/xen/pci.c | 94 +++++++++++++++++++++++++++++++++++-----
include/xen/interface/physdev.h | 34 ++++++++++++++
3 files changed, 136 insertions(+), 14 deletions(-)
--- 3.1-rc7/arch/x86/pci/xen.c
+++ 3.1-rc7-xen-pci-multi-seg/arch/x86/pci/xen.c
@@ -248,6 +248,8 @@ error:
}
#ifdef CONFIG_XEN_DOM0
+static bool __read_mostly pci_seg_supported = true;
+
static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int ret = 0;
@@ -265,10 +267,11 @@ static int xen_initdom_setup_msi_irqs(st
memset(&map_irq, 0, sizeof(map_irq));
map_irq.domid = domid;
- map_irq.type = MAP_PIRQ_TYPE_MSI;
+ map_irq.type = MAP_PIRQ_TYPE_MSI_SEG;
map_irq.index = -1;
map_irq.pirq = -1;
- map_irq.bus = dev->bus->number;
+ map_irq.bus = dev->bus->number |
+ (pci_domain_nr(dev->bus) << 16);
map_irq.devfn = dev->devfn;
if (type == PCI_CAP_ID_MSIX) {
@@ -285,7 +288,20 @@ static int xen_initdom_setup_msi_irqs(st
map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
}
- ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+ ret = -EINVAL;
+ if (pci_seg_supported)
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
+ &map_irq);
+ if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
+ map_irq.type = MAP_PIRQ_TYPE_MSI;
+ map_irq.index = -1;
+ map_irq.pirq = -1;
+ map_irq.bus = dev->bus->number;
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
+ &map_irq);
+ if (ret != -EINVAL)
+ pci_seg_supported = false;
+ }
if (ret) {
dev_warn(&dev->dev, "xen map irq failed %d for %d
domain\n",
ret, domid);
--- 3.1-rc7/drivers/xen/pci.c
+++ 3.1-rc7-xen-pci-multi-seg/drivers/xen/pci.c
@@ -18,6 +18,7 @@
*/
#include <linux/pci.h>
+#include <linux/acpi.h>
#include <xen/xen.h>
#include <xen/interface/physdev.h>
#include <xen/interface/xen.h>
@@ -26,26 +27,85 @@
#include <asm/xen/hypercall.h>
#include "../pci/pci.h"
+static bool __read_mostly pci_seg_supported = true;
+
static int xen_add_device(struct device *dev)
{
int r;
struct pci_dev *pci_dev = to_pci_dev(dev);
+#ifdef CONFIG_PCI_IOV
+ struct pci_dev *physfn = pci_dev->physfn;
+#endif
+
+ if (pci_seg_supported) {
+ struct physdev_pci_device_add add = {
+ .seg = pci_domain_nr(pci_dev->bus),
+ .bus = pci_dev->bus->number,
+ .devfn = pci_dev->devfn
+ };
+#ifdef CONFIG_ACPI
+ acpi_handle handle;
+#endif
#ifdef CONFIG_PCI_IOV
- if (pci_dev->is_virtfn) {
+ if (pci_dev->is_virtfn) {
+ add.flags = XEN_PCI_DEV_VIRTFN;
+ add.physfn.bus = physfn->bus->number;
+ add.physfn.devfn = physfn->devfn;
+ } else
+#endif
+ if (pci_ari_enabled(pci_dev->bus) && PCI_SLOT(pci_dev->devfn))
+ add.flags = XEN_PCI_DEV_EXTFN;
+
+#ifdef CONFIG_ACPI
+ handle = DEVICE_ACPI_HANDLE(&pci_dev->dev);
+ if (!handle)
+ handle = DEVICE_ACPI_HANDLE(pci_dev->bus->bridge);
+#ifdef CONFIG_PCI_IOV
+ if (!handle && pci_dev->is_virtfn)
+ handle = DEVICE_ACPI_HANDLE(physfn->bus->bridge);
+#endif
+ if (handle) {
+ acpi_status status;
+
+ do {
+ unsigned long long pxm;
+
+ status = acpi_evaluate_integer(handle, "_PXM",
+ NULL, &pxm);
+ if (ACPI_SUCCESS(status)) {
+ add.optarr[0] = pxm;
+ add.flags |= XEN_PCI_DEV_PXM;
+ break;
+ }
+ status = acpi_get_parent(handle, &handle);
+ } while (ACPI_SUCCESS(status));
+ }
+#endif /* CONFIG_ACPI */
+
+ r = HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_add, &add);
+ if (r != -ENOSYS)
+ return r;
+ pci_seg_supported = false;
+ }
+
+ if (pci_domain_nr(pci_dev->bus))
+ r = -ENOSYS;
+#ifdef CONFIG_PCI_IOV
+ else if (pci_dev->is_virtfn) {
struct physdev_manage_pci_ext manage_pci_ext = {
.bus = pci_dev->bus->number,
.devfn = pci_dev->devfn,
.is_virtfn = 1,
- .physfn.bus = pci_dev->physfn->bus->number,
- .physfn.devfn = pci_dev->physfn->devfn,
+ .physfn.bus = physfn->bus->number,
+ .physfn.devfn = physfn->devfn,
};
r = HYPERVISOR_physdev_op(PHYSDEVOP_manage_pci_add_ext,
&manage_pci_ext);
- } else
+ }
#endif
- if (pci_ari_enabled(pci_dev->bus) && PCI_SLOT(pci_dev->devfn)) {
+ else if (pci_ari_enabled(pci_dev->bus) && PCI_SLOT(pci_dev->devfn)) {
struct physdev_manage_pci_ext manage_pci_ext = {
.bus = pci_dev->bus->number,
.devfn = pci_dev->devfn,
@@ -71,13 +131,27 @@ static int xen_remove_device(struct devi
{
int r;
struct pci_dev *pci_dev = to_pci_dev(dev);
- struct physdev_manage_pci manage_pci;
- manage_pci.bus = pci_dev->bus->number;
- manage_pci.devfn = pci_dev->devfn;
+ if (pci_seg_supported) {
+ struct physdev_pci_device device = {
+ .seg = pci_domain_nr(pci_dev->bus),
+ .bus = pci_dev->bus->number,
+ .devfn = pci_dev->devfn
+ };
- r = HYPERVISOR_physdev_op(PHYSDEVOP_manage_pci_remove,
- &manage_pci);
+ r = HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_remove,
+ &device);
+ } else if (pci_domain_nr(pci_dev->bus))
+ r = -ENOSYS;
+ else {
+ struct physdev_manage_pci manage_pci = {
+ .bus = pci_dev->bus->number,
+ .devfn = pci_dev->devfn
+ };
+
+ r = HYPERVISOR_physdev_op(PHYSDEVOP_manage_pci_remove,
+ &manage_pci);
+ }
return r;
}
--- 3.1-rc7/include/xen/interface/physdev.h
+++ 3.1-rc7-xen-pci-multi-seg/include/xen/interface/physdev.h
@@ -109,6 +109,7 @@ struct physdev_irq {
#define MAP_PIRQ_TYPE_MSI 0x0
#define MAP_PIRQ_TYPE_GSI 0x1
#define MAP_PIRQ_TYPE_UNKNOWN 0x2
+#define MAP_PIRQ_TYPE_MSI_SEG 0x3
#define PHYSDEVOP_map_pirq 13
struct physdev_map_pirq {
@@ -119,7 +120,7 @@ struct physdev_map_pirq {
int index;
/* IN or OUT */
int pirq;
- /* IN */
+ /* IN - high 16 bits hold segment for MAP_PIRQ_TYPE_MSI_SEG */
int bus;
/* IN */
int devfn;
@@ -198,6 +199,37 @@ struct physdev_get_free_pirq {
uint32_t pirq;
};
+#define XEN_PCI_DEV_EXTFN 0x1
+#define XEN_PCI_DEV_VIRTFN 0x2
+#define XEN_PCI_DEV_PXM 0x4
+
+#define PHYSDEVOP_pci_device_add 25
+struct physdev_pci_device_add {
+ /* IN */
+ uint16_t seg;
+ uint8_t bus;
+ uint8_t devfn;
+ uint32_t flags;
+ struct {
+ uint8_t bus;
+ uint8_t devfn;
+ } physfn;
+#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+ uint32_t optarr[];
+#elif defined(__GNUC__)
+ uint32_t optarr[0];
+#endif
+};
+
+#define PHYSDEVOP_pci_device_remove 26
+#define PHYSDEVOP_restore_msi_ext 27
+struct physdev_pci_device {
+ /* IN */
+ uint16_t seg;
+ uint8_t bus;
+ uint8_t devfn;
+};
+
/*
* Notify that some PIRQ-bound event channels have been unmasked.
* ** This command is obsolete since interface version 0x00030202 and is **
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |