[Xen-devel] [PATCH 1 of 6 DOCDAY] docs: import HVM emulated device unplug protocol spec

[Ian Campbell <ian.campbell@xxxxxxxxxx>]

# HG changeset patch
# User Ian Campbell <ian.campbell@xxxxxxxxxx>
# Date 1319646021 -3600
# Node ID 03b570c3792bb6abce46de5c9ab560ac169117c3
# Parent  c681dd5aecf3da3c6fd0e4d8a760a9cd18617033
docs: import HVM emulated device unplug protocol spec

Convert to markdown as I go.

Currently this lives in qemu-xen.git i386-dm/README.hvm-pv-magic-ioport-disable
and I can never find it when I want it. As we transition to upstream qemu this
location becomes less useful.

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>

diff -r c681dd5aecf3 -r 03b570c3792b docs/misc/hvm-emulated-unplug.markdown
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/docs/misc/hvm-emulated-unplug.markdown    Wed Oct 26 17:20:21 2011 +0100
@@ -0,0 +1,68 @@
+#Xen HVM emulated device unplug protocol
+
+The protocol covers three basic things:
+
+ * Disconnecting emulated devices.
+ * Getting log messages out of the drivers and into dom0.
+ * Allowing dom0 to block the loading of specific drivers.  This is
+   intended as a backwards-compatibility thing: if we discover a bug
+   in some old version of the drivers, then rather than working around
+   it in Xen, we have the option of just making those drivers fall
+   back to emulated mode.
+
+The current protocol works like this (from the point of view of
+drivers):
+
+1. When the drivers first come up, they check whether the unplug logic
+   is available by reading a two-byte magic number from IO port `0x10`.
+   These should be `0x49d2`.  If the magic number doesn't match, the
+   drivers don't do anything.
+
+2. The drivers read a one-byte protocol version from IO port `0x12`.  If
+   this is 0, skip to 6.
+
+3. The drivers write a two-byte product number to IO port `0x12`.  At
+   the moment, the only drivers using this protocol are our
+   closed-source ones, which use product number 1.
+
+4. The drivers write a four-byte build number to IO port `0x10`.
+
+5. The drivers check the magic number by reading two bytes from `0x10`
+   again.  If it's changed from `0x49d2` to `0xd249`, the drivers are
+   blacklisted and should not load.
+
+6. The drivers write a two-byte bitmask of devices to unplug to IO
+   port `0x10`.  The defined fields are:
+
+  * `1` -- All IDE disks (not including CD drives)
+  * `2` -- All emulated NICs
+  * `4` -- All IDE disks except for the primary master (not including CD
+          drives)
+
+   The relevant emulated devices then disappear from the relevant
+   buses.  For most guest operating systems, you want to do this
+   before device enumeration happens.
+
+Once the drivers have checked the magic number, they can send log
+messages to qemu which will be logged to wherever qemu's logs go
+(`/var/log/xen/qemu-dm.log` on normal Xen, dom0 syslog on XenServer).
+These messages are written to IO port `0x12` a byte at a time, and are
+terminated by newlines.  There's a fairly aggressive rate limiter on
+these messages, so they shouldn't be used for anything even vaguely
+high-volume, but they're rather useful for debugging and support.
+
+It is still permitted for a driver to use this logging feature if it
+is blacklisted, but *ONLY* if it has checked the magic number and found
+it to be `0x49d2` or `0xd249`.
+
+This isn't exactly a pretty protocol, but it does solve the problem.
+
+The blacklist is, from qemu's point of view, handled mostly through
+xenstore.  A driver version is considered to be blacklisted if
+`/mh/driver-blacklist/{product_name}/{build_number}` exists and is
+readable, where `{build_number}` is the build number from step 4 as a
+decimal number.  `{product_name}` is a string corresponding to the
+product number in step 3.
+
+The master registry of product names and numbers is in
+qemu-xen-unstable's xenstore.c.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel