|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH V3 07/10] Introduce Xen PCI Passthrough, qdevice (1/3)
From: Allen Kay <allen.m.kay@xxxxxxxxx>
Signed-off-by: Allen Kay <allen.m.kay@xxxxxxxxx>
Signed-off-by: Guy Zana <guy@xxxxxxxxxxxx>
Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
---
Makefile.target | 2 +
hw/xen_pci_passthrough.c | 838 ++++++++++++++++++++++++++++++++++++++
hw/xen_pci_passthrough.h | 223 ++++++++++
hw/xen_pci_passthrough_helpers.c | 46 ++
4 files changed, 1109 insertions(+), 0 deletions(-)
create mode 100644 hw/xen_pci_passthrough.c
create mode 100644 hw/xen_pci_passthrough.h
create mode 100644 hw/xen_pci_passthrough_helpers.c
diff --git a/Makefile.target b/Makefile.target
index 243f9f2..36ea47d 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -217,6 +217,8 @@ obj-i386-$(CONFIG_XEN) += xen_platform.o
# Xen PCI Passthrough
obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += host-pci-device.o
+obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough.o
+obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough_helpers.o
# Inter-VM PCI shared memory
CONFIG_IVSHMEM =
diff --git a/hw/xen_pci_passthrough.c b/hw/xen_pci_passthrough.c
new file mode 100644
index 0000000..b97c5b6
--- /dev/null
+++ b/hw/xen_pci_passthrough.c
@@ -0,0 +1,838 @@
+/*
+ * Copyright (c) 2007, Neocleus Corporation.
+ * Copyright (c) 2007, Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * Alex Novik <alex@xxxxxxxxxxxx>
+ * Allen Kay <allen.m.kay@xxxxxxxxx>
+ * Guy Zana <guy@xxxxxxxxxxxx>
+ *
+ * This file implements direct PCI assignment to a HVM guest
+ */
+
+/*
+ * Interrupt Disable policy:
+ *
+ * INTx interrupt:
+ * Initialize(register_real_device)
+ * Map INTx(xc_physdev_map_pirq):
+ * <fail>
+ * - Set real Interrupt Disable bit to '1'.
+ * - Set machine_irq and assigned_device->machine_irq to '0'.
+ * * Don't bind INTx.
+ *
+ * Bind INTx(xc_domain_bind_pt_pci_irq):
+ * <fail>
+ * - Set real Interrupt Disable bit to '1'.
+ * - Unmap INTx.
+ * - Decrement mapped_machine_irq[machine_irq]
+ * - Set assigned_device->machine_irq to '0'.
+ *
+ * Write to Interrupt Disable bit by guest software(pt_cmd_reg_write)
+ * Write '0'
+ * <ptdev->msi_trans_en is false>
+ * - Set real bit to '0' if assigned_device->machine_irq isn't '0'.
+ *
+ * Write '1'
+ * <ptdev->msi_trans_en is false>
+ * - Set real bit to '1'.
+ *
+ * MSI-INTx translation.
+ * Initialize(xc_physdev_map_pirq_msi/pt_msi_setup)
+ * Bind MSI-INTx(xc_domain_bind_pt_irq)
+ * <fail>
+ * - Unmap MSI.
+ * <success>
+ * - Set dev->msi->pirq to '-1'.
+ * <fail>
+ * - Do nothing.
+ *
+ * Write to Interrupt Disable bit by guest software(pt_cmd_reg_write)
+ * Write '0'
+ * <ptdev->msi_trans_en is true>
+ * - Set MSI Enable bit to '1'.
+ *
+ * Write '1'
+ * <ptdev->msi_trans_en is true>
+ * - Set MSI Enable bit to '0'.
+ *
+ * MSI interrupt:
+ * Initialize MSI register(pt_msi_setup, pt_msi_update)
+ * Bind MSI(xc_domain_update_msi_irq)
+ * <fail>
+ * - Unmap MSI.
+ * - Set dev->msi->pirq to '-1'.
+ *
+ * MSI-X interrupt:
+ * Initialize MSI-X register(pt_msix_update_one)
+ * Bind MSI-X(xc_domain_update_msi_irq)
+ * <fail>
+ * - Unmap MSI-X.
+ * - Set entry->pirq to '-1'.
+ */
+
+#include <sys/ioctl.h>
+
+#include "pci.h"
+#include "xen.h"
+#include "xen_backend.h"
+#include "xen_pci_passthrough.h"
+
+#define PCI_BAR_ENTRIES (6)
+
+#define PT_NR_IRQS (256)
+char mapped_machine_irq[PT_NR_IRQS] = {0};
+
+/* Config Space */
+static int pt_pci_config_access_check(PCIDevice *d, uint32_t address, int len)
+{
+ /* check offset range */
+ if (address >= 0xFF) {
+ PT_LOG("Error: Failed to access register with offset exceeding FFh. "
+ "[%02x:%02x.%x][Offset:%02xh][Length:%d]\n",
+ pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn),
+ address, len);
+ return -1;
+ }
+
+ /* check read size */
+ if ((len != 1) && (len != 2) && (len != 4)) {
+ PT_LOG("Error: Failed to access register with invalid access length. "
+ "[%02x:%02x.%x][Offset:%02xh][Length:%d]\n",
+ pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn),
+ address, len);
+ return -1;
+ }
+
+ /* check offset alignment */
+ if (address & (len - 1)) {
+ PT_LOG("Error: Failed to access register with invalid access size "
+ "alignment. [%02x:%02x.%x][Offset:%02xh][Length:%d]\n",
+ pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn),
+ address, len);
+ return -1;
+ }
+
+ return 0;
+}
+
+int pt_bar_offset_to_index(uint32_t offset)
+{
+ int index = 0;
+
+ /* check Exp ROM BAR */
+ if (offset == PCI_ROM_ADDRESS) {
+ return PCI_ROM_SLOT;
+ }
+
+ /* calculate BAR index */
+ index = (offset - PCI_BASE_ADDRESS_0) >> 2;
+ if (index >= PCI_NUM_REGIONS) {
+ return -1;
+ }
+
+ return index;
+}
+
+static uint32_t pt_pci_read_config(PCIDevice *d, uint32_t address, int len)
+{
+ XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, d);
+ uint32_t val = 0;
+ XenPTRegGroup *reg_grp_entry = NULL;
+ XenPTReg *reg_entry = NULL;
+ int rc = 0;
+ int emul_len = 0;
+ uint32_t find_addr = address;
+
+ if (pt_pci_config_access_check(d, address, len)) {
+ goto exit;
+ }
+
+ /* check power state transition flags */
+ if (s->pm_state != NULL && s->pm_state->flags & PT_FLAG_TRANSITING) {
+ /* can't accept until previous power state transition is completed.
+ * so finished previous request here.
+ */
+ PT_LOG("Warning: guest want to write durring power state
transition\n");
+ goto exit;
+ }
+
+ /* find register group entry */
+ reg_grp_entry = pt_find_reg_grp(s, address);
+ if (reg_grp_entry) {
+ /* check 0 Hardwired register group */
+ if (reg_grp_entry->reg_grp->grp_type == GRP_TYPE_HARDWIRED) {
+ /* no need to emulate, just return 0 */
+ val = 0;
+ goto exit;
+ }
+ }
+
+ /* read I/O device register value */
+ rc = host_pci_get_block(s->real_device, address, (uint8_t *)&val, len);
+ if (!rc) {
+ PT_LOG("Error: pci_read_block failed. return value[%d].\n", rc);
+ memset(&val, 0xff, len);
+ }
+
+ /* just return the I/O device register value for
+ * passthrough type register group */
+ if (reg_grp_entry == NULL) {
+ goto exit;
+ }
+
+ /* adjust the read value to appropriate CFC-CFF window */
+ val <<= (address & 3) << 3;
+ emul_len = len;
+
+ /* loop Guest request size */
+ while (emul_len > 0) {
+ /* find register entry to be emulated */
+ reg_entry = pt_find_reg(reg_grp_entry, find_addr);
+ if (reg_entry) {
+ XenPTRegInfo *reg = reg_entry->reg;
+ uint32_t real_offset = reg_grp_entry->base_offset + reg->offset;
+ uint32_t valid_mask = 0xFFFFFFFF >> ((4 - emul_len) << 3);
+ uint8_t *ptr_val = NULL;
+
+ valid_mask <<= (find_addr - real_offset) << 3;
+ ptr_val = (uint8_t *)&val + (real_offset & 3);
+
+ /* do emulation depend on register size */
+ switch (reg->size) {
+ case 1:
+ if (reg->u.b.read) {
+ rc = reg->u.b.read(s, reg_entry, ptr_val, valid_mask);
+ }
+ break;
+ case 2:
+ if (reg->u.w.read) {
+ rc = reg->u.w.read(s, reg_entry,
+ (uint16_t *)ptr_val, valid_mask);
+ }
+ break;
+ case 4:
+ if (reg->u.dw.read) {
+ rc = reg->u.dw.read(s, reg_entry,
+ (uint32_t *)ptr_val, valid_mask);
+ }
+ break;
+ }
+
+ if (rc < 0) {
+ hw_error("Internal error: Invalid read emulation "
+ "return value[%d]. I/O emulator exit.\n", rc);
+ }
+
+ /* calculate next address to find */
+ emul_len -= reg->size;
+ if (emul_len > 0) {
+ find_addr = real_offset + reg->size;
+ }
+ } else {
+ /* nothing to do with passthrough type register,
+ * continue to find next byte */
+ emul_len--;
+ find_addr++;
+ }
+ }
+
+ /* need to shift back before returning them to pci bus emulator */
+ val >>= ((address & 3) << 3);
+
+exit:
+ PT_LOG_CONFIG("[%02x:%02x.%x]: address=%04x val=0x%08x len=%d\n",
+ pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn),
+ address, val, len);
+ return val;
+}
+
+static void pt_pci_write_config(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, d);
+ int index = 0;
+ XenPTRegGroup *reg_grp_entry = NULL;
+ int rc = 0;
+ uint32_t read_val = 0;
+ int emul_len = 0;
+ XenPTReg *reg_entry = NULL;
+ uint32_t find_addr = address;
+ XenPTRegInfo *reg = NULL;
+
+ if (pt_pci_config_access_check(d, address, len)) {
+ return;
+ }
+
+ PT_LOG_CONFIG("[%02x:%02x.%x]: address=%04x val=0x%08x len=%d\n",
+ pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn),
+ address, val, len);
+
+ /* check unused BAR register */
+ index = pt_bar_offset_to_index(address);
+ if ((index >= 0) && (val > 0 && val < PT_BAR_ALLF) &&
+ (s->bases[index].bar_flag == PT_BAR_FLAG_UNUSED)) {
+ PT_LOG("Warning: Guest attempt to set address to unused Base Address "
+ "Register. [%02x:%02x.%x][Offset:%02xh][Length:%d]\n",
+ pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn),
+ address, len);
+ }
+
+ /* check power state transition flags */
+ if (s->pm_state != NULL && s->pm_state->flags & PT_FLAG_TRANSITING) {
+ /* can't accept untill previous power state transition is completed.
+ * so finished previous request here.
+ */
+ PT_LOG("Warning: guest want to write durring power state
transition\n");
+ return;
+ }
+
+ /* find register group entry */
+ reg_grp_entry = pt_find_reg_grp(s, address);
+ if (reg_grp_entry) {
+ /* check 0 Hardwired register group */
+ if (reg_grp_entry->reg_grp->grp_type == GRP_TYPE_HARDWIRED) {
+ /* ignore silently */
+ PT_LOG("Warning: Access to 0 Hardwired register. "
+ "[%02x:%02x.%x][Offset:%02xh][Length:%d]\n",
+ pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn),
+ address, len);
+ return;
+ }
+ }
+
+ /* read I/O device register value */
+ rc = host_pci_get_block(s->real_device, address,
+ (uint8_t *)&read_val, len);
+ if (!rc) {
+ PT_LOG("Error: pci_read_block failed. return value[%d].\n", rc);
+ memset(&read_val, 0xff, len);
+ }
+
+ /* pass directly to libpci for passthrough type register group */
+ if (reg_grp_entry == NULL) {
+ goto out;
+ }
+
+ /* adjust the read and write value to appropriate CFC-CFF window */
+ read_val <<= (address & 3) << 3;
+ val <<= (address & 3) << 3;
+ emul_len = len;
+
+ /* loop Guest request size */
+ while (emul_len > 0) {
+ /* find register entry to be emulated */
+ reg_entry = pt_find_reg(reg_grp_entry, find_addr);
+ if (reg_entry) {
+ reg = reg_entry->reg;
+ uint32_t real_offset = reg_grp_entry->base_offset + reg->offset;
+ uint32_t valid_mask = 0xFFFFFFFF >> ((4 - emul_len) << 3);
+ uint8_t *ptr_val = NULL;
+
+ valid_mask <<= (find_addr - real_offset) << 3;
+ ptr_val = (uint8_t *)&val + (real_offset & 3);
+
+ /* do emulation depend on register size */
+ switch (reg->size) {
+ case 1:
+ if (reg->u.b.write) {
+ rc = reg->u.b.write(s, reg_entry, ptr_val,
+ read_val >> ((real_offset & 3) << 3),
+ valid_mask);
+ }
+ break;
+ case 2:
+ if (reg->u.w.write) {
+ rc = reg->u.w.write(s, reg_entry, (uint16_t *)ptr_val,
+ (read_val >> ((real_offset & 3) << 3)),
+ valid_mask);
+ }
+ break;
+ case 4:
+ if (reg->u.dw.write) {
+ rc = reg->u.dw.write(s, reg_entry, (uint32_t *)ptr_val,
+ (read_val >> ((real_offset & 3) <<
3)),
+ valid_mask);
+ }
+ break;
+ }
+
+ if (rc < 0) {
+ hw_error("Internal error: Invalid write emulation "
+ "return value[%d]. I/O emulator exit.\n", rc);
+ }
+
+ /* calculate next address to find */
+ emul_len -= reg->size;
+ if (emul_len > 0) {
+ find_addr = real_offset + reg->size;
+ }
+ } else {
+ /* nothing to do with passthrough type register,
+ * continue to find next byte */
+ emul_len--;
+ find_addr++;
+ }
+ }
+
+ /* need to shift back before passing them to libpci */
+ val >>= (address & 3) << 3;
+
+out:
+ if (!(reg && reg->no_wb)) {
+ /* unknown regs are passed through */
+ rc = host_pci_set_block(s->real_device, address, (uint8_t *)&val, len);
+
+ if (!rc) {
+ PT_LOG("Error: pci_write_block failed. return value[%d].\n", rc);
+ }
+ }
+
+ if (s->pm_state != NULL && s->pm_state->flags & PT_FLAG_TRANSITING) {
+ qemu_mod_timer(s->pm_state->pm_timer,
+ qemu_get_clock_ms(rt_clock) + s->pm_state->pm_delay);
+ }
+}
+
+/* ioport/iomem space*/
+static void pt_iomem_map(XenPCIPassthroughState *s, int i,
+ pcibus_t e_phys, pcibus_t e_size, int type)
+{
+ uint32_t old_ebase = s->bases[i].e_physbase;
+ bool first_map = s->bases[i].e_size == 0;
+ int ret = 0;
+
+ s->bases[i].e_physbase = e_phys;
+ s->bases[i].e_size = e_size;
+
+ PT_LOG("e_phys=%#"PRIx64" maddr=%#"PRIx64" type=%%d"
+ " len=%#"PRIx64" index=%d first_map=%d\n",
+ e_phys, s->bases[i].access.maddr, /*type,*/
+ e_size, i, first_map);
+
+ if (e_size == 0) {
+ return;
+ }
+
+ if (!first_map && old_ebase != -1) {
+ /* Remove old mapping */
+ ret = xc_domain_memory_mapping(xen_xc, xen_domid,
+ old_ebase >> XC_PAGE_SHIFT,
+ s->bases[i].access.maddr >> XC_PAGE_SHIFT,
+ (e_size + XC_PAGE_SIZE - 1) >> XC_PAGE_SHIFT,
+ DPCI_REMOVE_MAPPING);
+ if (ret != 0) {
+ PT_LOG("Error: remove old mapping failed!\n");
+ return;
+ }
+ }
+
+ /* map only valid guest address */
+ if (e_phys != -1) {
+ /* Create new mapping */
+ ret = xc_domain_memory_mapping(xen_xc, xen_domid,
+ s->bases[i].e_physbase >> XC_PAGE_SHIFT,
+ s->bases[i].access.maddr >> XC_PAGE_SHIFT,
+ (e_size+XC_PAGE_SIZE-1) >> XC_PAGE_SHIFT,
+ DPCI_ADD_MAPPING);
+
+ if (ret != 0) {
+ PT_LOG("Error: create new mapping failed!\n");
+ }
+ }
+}
+
+static void pt_ioport_map(XenPCIPassthroughState *s, int i,
+ pcibus_t e_phys, pcibus_t e_size, int type)
+{
+ uint32_t old_ebase = s->bases[i].e_physbase;
+ bool first_map = s->bases[i].e_size == 0;
+ int ret = 0;
+
+ s->bases[i].e_physbase = e_phys;
+ s->bases[i].e_size = e_size;
+
+ PT_LOG("e_phys=%#04"PRIx64" pio_base=%#04"PRIx64" len=%"PRId64" index=%d"
+ " first_map=%d\n",
+ e_phys, s->bases[i].access.pio_base, e_size, i, first_map);
+
+ if (e_size == 0) {
+ return;
+ }
+
+ if (!first_map && old_ebase != -1) {
+ /* Remove old mapping */
+ ret = xc_domain_ioport_mapping(xen_xc, xen_domid, old_ebase,
+ s->bases[i].access.pio_base, e_size,
+ DPCI_REMOVE_MAPPING);
+ if (ret != 0) {
+ PT_LOG("Error: remove old mapping failed!\n");
+ return;
+ }
+ }
+
+ /* map only valid guest address (include 0) */
+ if (e_phys != -1) {
+ /* Create new mapping */
+ ret = xc_domain_ioport_mapping(xen_xc, xen_domid, e_phys,
+ s->bases[i].access.pio_base, e_size,
+ DPCI_ADD_MAPPING);
+ if (ret != 0) {
+ PT_LOG("Error: create new mapping failed!\n");
+ }
+ }
+
+}
+
+
+/* mapping BAR */
+
+void pt_bar_mapping_one(XenPCIPassthroughState *s, int bar,
+ int io_enable, int mem_enable)
+{
+ PCIDevice *dev = &s->dev;
+ PCIIORegion *r;
+ XenPTRegGroup *reg_grp_entry = NULL;
+ XenPTReg *reg_entry = NULL;
+ XenPTRegion *base = NULL;
+ pcibus_t r_size = 0, r_addr = -1;
+ int rc = 0;
+
+ r = &dev->io_regions[bar];
+
+ /* check valid region */
+ if (!r->size) {
+ return;
+ }
+
+ base = &s->bases[bar];
+ /* skip unused BAR or upper 64bit BAR */
+ if ((base->bar_flag == PT_BAR_FLAG_UNUSED)
+ || (base->bar_flag == PT_BAR_FLAG_UPPER)) {
+ return;
+ }
+
+ /* copy region address to temporary */
+ r_addr = r->addr;
+
+ /* need unmapping in case I/O Space or Memory Space disable */
+ if (((base->bar_flag == PT_BAR_FLAG_IO) && !io_enable) ||
+ ((base->bar_flag == PT_BAR_FLAG_MEM) && !mem_enable)) {
+ r_addr = -1;
+ }
+ if ((bar == PCI_ROM_SLOT) && (r_addr != -1)) {
+ reg_grp_entry = pt_find_reg_grp(s, PCI_ROM_ADDRESS);
+ if (reg_grp_entry) {
+ reg_entry = pt_find_reg(reg_grp_entry, PCI_ROM_ADDRESS);
+ if (reg_entry && !(reg_entry->data & PCI_ROM_ADDRESS_ENABLE)) {
+ r_addr = -1;
+ }
+ }
+ }
+
+ /* prevent guest software mapping memory resource to 00000000h */
+ if ((base->bar_flag == PT_BAR_FLAG_MEM) && (r_addr == 0)) {
+ r_addr = -1;
+ }
+
+ r_size = pt_get_emul_size(base->bar_flag, r->size);
+
+ rc = pci_check_bar_overlap(dev, r_addr, r_size, r->type);
+ if (rc > 0) {
+ PT_LOG("Warning: s[%02x:%02x.%x][Region:%d][Address:%"FMT_PCIBUS"h]"
+ "[Size:%"FMT_PCIBUS"h] is overlapped.\n", pci_bus_num(dev->bus),
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), bar,
+ r_addr, r_size);
+ }
+
+ /* check whether we need to update the mapping or not */
+ if (r_addr != s->bases[bar].e_physbase) {
+ /* mapping BAR */
+ if (base->bar_flag == PT_BAR_FLAG_IO) {
+ pt_ioport_map(s, bar, r_addr, r_size, r->type);
+ } else {
+ pt_iomem_map(s, bar, r_addr, r_size, r->type);
+ }
+ }
+}
+
+void pt_bar_mapping(XenPCIPassthroughState *s, int io_enable, int mem_enable)
+{
+ int i;
+
+ for (i = 0; i < PCI_NUM_REGIONS; i++) {
+ pt_bar_mapping_one(s, i, io_enable, mem_enable);
+ }
+}
+
+/* register regions */
+static int pt_register_regions(XenPCIPassthroughState *s)
+{
+ int i = 0;
+ uint32_t bar_data = 0;
+ HostPCIDevice *d = s->real_device;
+
+ /* Register PIO/MMIO BARs */
+ for (i = 0; i < PCI_BAR_ENTRIES; i++) {
+ HostPCIIORegion *r = &d->io_regions[i];
+
+ if (r->base_addr) {
+ s->bases[i].e_physbase = r->base_addr;
+ s->bases[i].access.u = r->base_addr;
+
+ /* Register current region */
+ if (r->flags & IORESOURCE_IO) {
+ memory_region_init_io(&s->bar[i], NULL, NULL,
+ "xen-pci-pt-bar", r->size);
+ pci_register_bar(&s->dev, i, PCI_BASE_ADDRESS_SPACE_IO,
+ &s->bar[i]);
+ } else if (r->flags & IORESOURCE_PREFETCH) {
+ memory_region_init_io(&s->bar[i], NULL, NULL,
+ "xen-pci-pt-bar", r->size);
+ pci_register_bar(&s->dev, i, PCI_BASE_ADDRESS_MEM_PREFETCH,
+ &s->bar[i]);
+ } else {
+ memory_region_init_io(&s->bar[i], NULL, NULL,
+ "xen-pci-pt-bar", r->size);
+ pci_register_bar(&s->dev, i, PCI_BASE_ADDRESS_SPACE_MEMORY,
+ &s->bar[i]);
+ }
+
+ PT_LOG("IO region registered (size=0x%08"PRIx64
+ " base_addr=0x%08"PRIx64")\n",
+ r->size, r->base_addr);
+ }
+ }
+
+ /* Register expansion ROM address */
+ if (d->rom.base_addr && d->rom.size) {
+ /* Re-set BAR reported by OS, otherwise ROM can't be read. */
+ bar_data = host_pci_get_long(d, PCI_ROM_ADDRESS);
+ if ((bar_data & PCI_ROM_ADDRESS_MASK) == 0) {
+ bar_data |= d->rom.base_addr & PCI_ROM_ADDRESS_MASK;
+ host_pci_set_long(d, PCI_ROM_ADDRESS, bar_data);
+ }
+
+ s->bases[PCI_ROM_SLOT].e_physbase = d->rom.base_addr;
+ s->bases[PCI_ROM_SLOT].access.maddr = d->rom.base_addr;
+
+ memory_region_init_rom_device(&s->rom, NULL, NULL, &s->dev.qdev,
+ "xen-pci-pt-rom", d->rom.size);
+ pci_register_bar(&s->dev, PCI_ROM_SLOT, PCI_BASE_ADDRESS_MEM_PREFETCH,
+ &s->rom);
+
+ PT_LOG("Expansion ROM registered (size=0x%08"PRIx64
+ " base_addr=0x%08"PRIx64")\n",
+ d->rom.size, d->rom.base_addr);
+ }
+
+ return 0;
+}
+
+static void pt_unregister_regions(XenPCIPassthroughState *s)
+{
+ int i, type, rc;
+ uint32_t e_size;
+ PCIDevice *d = &s->dev;
+
+ for (i = 0; i < PCI_NUM_REGIONS; i++) {
+ e_size = s->bases[i].e_size;
+ if ((e_size == 0) || (s->bases[i].e_physbase == -1)) {
+ continue;
+ }
+
+ type = d->io_regions[i].type;
+
+ if (type == PCI_BASE_ADDRESS_SPACE_MEMORY
+ || type == PCI_BASE_ADDRESS_MEM_PREFETCH) {
+ rc = xc_domain_memory_mapping(xen_xc, xen_domid,
+ s->bases[i].e_physbase >> XC_PAGE_SHIFT,
+ s->bases[i].access.maddr >> XC_PAGE_SHIFT,
+ (e_size+XC_PAGE_SIZE-1) >> XC_PAGE_SHIFT,
+ DPCI_REMOVE_MAPPING);
+ if (rc != 0) {
+ PT_LOG("Error: remove old mem mapping failed!\n");
+ continue;
+ }
+
+ } else if (type == PCI_BASE_ADDRESS_SPACE_IO) {
+ rc = xc_domain_ioport_mapping(xen_xc, xen_domid,
+ s->bases[i].e_physbase,
+ s->bases[i].access.pio_base,
+ e_size,
+ DPCI_REMOVE_MAPPING);
+ if (rc != 0) {
+ PT_LOG("Error: remove old io mapping failed!\n");
+ continue;
+ }
+ }
+ }
+}
+
+static int pt_initfn(PCIDevice *pcidev)
+{
+ XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, pcidev);
+ int dom, bus;
+ unsigned slot, func;
+ int rc = 0;
+ uint32_t machine_irq;
+ int pirq = -1;
+
+ if (pci_parse_devaddr(s->hostaddr, &dom, &bus, &slot, &func) < 0) {
+ fprintf(stderr, "error parse bdf: %s\n", s->hostaddr);
+ return -1;
+ }
+
+ /* register real device */
+ PT_LOG("Assigning real physical device %02x:%02x.%x to devfn %i ...\n",
+ bus, slot, func, s->dev.devfn);
+
+ s->real_device = host_pci_device_get(bus, slot, func);
+ if (!s->real_device) {
+ return -1;
+ }
+
+ s->is_virtfn = s->real_device->is_virtfn;
+ if (s->is_virtfn) {
+ PT_LOG("%04x:%02x:%02x.%x is a SR-IOV Virtual Function\n",
+ s->real_device->domain, bus, slot, func);
+ }
+
+ /* Initialize virtualized PCI configuration (Extended 256 Bytes) */
+ if (host_pci_get_block(s->real_device, 0, pcidev->config,
+ PCI_CONFIG_SPACE_SIZE) == -1) {
+ return -1;
+ }
+
+ /* Handle real device's MMIO/PIO BARs */
+ pt_register_regions(s);
+
+ /* reinitialize each config register to be emulated */
+ pt_config_init(s);
+
+ /* Bind interrupt */
+ if (!s->dev.config[PCI_INTERRUPT_PIN]) {
+ PT_LOG("no pin interrupt\n");
+ goto out;
+ }
+
+ machine_irq = host_pci_get_byte(s->real_device, PCI_INTERRUPT_LINE);
+ rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
+
+ if (rc) {
+ PT_LOG("Error: Mapping irq failed, rc = %d\n", rc);
+
+ /* Disable PCI intx assertion (turn on bit10 of devctl) */
+ host_pci_set_word(s->real_device,
+ PCI_COMMAND,
+ pci_get_word(s->dev.config + PCI_COMMAND)
+ | PCI_COMMAND_INTX_DISABLE);
+ machine_irq = 0;
+ s->machine_irq = 0;
+ } else {
+ machine_irq = pirq;
+ s->machine_irq = pirq;
+ mapped_machine_irq[machine_irq]++;
+ }
+
+ /* bind machine_irq to device */
+ if (rc < 0 && machine_irq != 0) {
+ uint8_t e_device = PCI_SLOT(s->dev.devfn);
+ uint8_t e_intx = pci_intx(s);
+
+ rc = xc_domain_bind_pt_pci_irq(xen_xc, xen_domid, machine_irq, 0,
+ e_device, e_intx);
+ if (rc < 0) {
+ PT_LOG("Error: Binding of interrupt failed! rc=%d\n", rc);
+
+ /* Disable PCI intx assertion (turn on bit10 of devctl) */
+ host_pci_set_word(s->real_device, PCI_COMMAND,
+ *(uint16_t *)(&s->dev.config[PCI_COMMAND])
+ | PCI_COMMAND_INTX_DISABLE);
+ mapped_machine_irq[machine_irq]--;
+
+ if (mapped_machine_irq[machine_irq] == 0) {
+ if (xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq)) {
+ PT_LOG("Error: Unmapping of interrupt failed! rc=%d\n",
+ rc);
+ }
+ }
+ s->machine_irq = 0;
+ }
+ }
+
+out:
+ PT_LOG("Real physical device %02x:%02x.%x registered successfuly!\n"
+ "IRQ type = %s\n", bus, slot, func, "INTx");
+
+ return 0;
+}
+
+static int pt_unregister_device(PCIDevice *pcidev)
+{
+ XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, pcidev);
+ uint8_t e_device, e_intx;
+ uint32_t machine_irq;
+ int rc;
+
+ /* Unbind interrupt */
+ e_device = PCI_SLOT(s->dev.devfn);
+ e_intx = pci_intx(s);
+ machine_irq = s->machine_irq;
+
+ if (machine_irq) {
+ rc = xc_domain_unbind_pt_irq(xen_xc, xen_domid, machine_irq,
+ PT_IRQ_TYPE_PCI, 0, e_device, e_intx, 0);
+ if (rc < 0) {
+ PT_LOG("Error: Unbinding of interrupt failed! rc=%d\n", rc);
+ }
+ }
+
+ if (machine_irq) {
+ mapped_machine_irq[machine_irq]--;
+
+ if (mapped_machine_irq[machine_irq] == 0) {
+ rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq);
+
+ if (rc < 0) {
+ PT_LOG("Error: Unmaping of interrupt failed! rc=%d\n", rc);
+ }
+ }
+ }
+
+ /* delete all emulated config registers */
+ pt_config_delete(s);
+
+ /* unregister real device's MMIO/PIO BARs */
+ pt_unregister_regions(s);
+
+ host_pci_device_put(s->real_device);
+
+ return 0;
+}
+
+static PCIDeviceInfo xen_pci_passthrough = {
+ .init = pt_initfn,
+ .exit = pt_unregister_device,
+ .qdev.name = "xen-pci-passthrough",
+ .qdev.desc = "Assign an host pci device with Xen",
+ .qdev.size = sizeof(XenPCIPassthroughState),
+ .config_read = pt_pci_read_config,
+ .config_write = pt_pci_write_config,
+ .is_express = 0,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_STRING("hostaddr", XenPCIPassthroughState, hostaddr),
+ DEFINE_PROP_BIT("power-mgmt", XenPCIPassthroughState, power_mgmt,
+ 0, false),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void xen_passthrough_register(void)
+{
+ pci_qdev_register(&xen_pci_passthrough);
+}
+
+device_init(xen_passthrough_register);
diff --git a/hw/xen_pci_passthrough.h b/hw/xen_pci_passthrough.h
new file mode 100644
index 0000000..2d1979d
--- /dev/null
+++ b/hw/xen_pci_passthrough.h
@@ -0,0 +1,223 @@
+#ifndef QEMU_HW_XEN_PCI_PASSTHROUGH_H
+# define QEMU_HW_XEN_PCI_PASSTHROUGH_H
+
+#include "qemu-common.h"
+#include "xen_common.h"
+#include "pci.h"
+#include "host-pci-device.h"
+
+#define PT_LOGGING_ENABLED
+#define PT_DEBUG_PCI_CONFIG_ACCESS
+
+#ifdef PT_LOGGING_ENABLED
+# define PT_LOG(_f, _a...) fprintf(stderr, "%s: " _f, __func__, ##_a)
+#else
+# define PT_LOG(_f, _a...)
+#endif
+
+#ifdef PT_DEBUG_PCI_CONFIG_ACCESS
+# define PT_LOG_CONFIG(_f, _a...) PT_LOG(_f, ##_a)
+#else
+# define PT_LOG_CONFIG(_f, _a...)
+#endif
+
+
+typedef struct XenPTRegInfo XenPTRegInfo;
+typedef struct XenPTReg XenPTReg;
+
+typedef struct XenPCIPassthroughState XenPCIPassthroughState;
+
+/* function type for config reg */
+typedef uint32_t (*conf_reg_init)
+ (XenPCIPassthroughState *, XenPTRegInfo *, uint32_t real_offset);
+typedef int (*conf_dword_write)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+ uint32_t *val, uint32_t dev_value, uint32_t valid_mask);
+typedef int (*conf_word_write)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+ uint16_t *val, uint16_t dev_value, uint16_t valid_mask);
+typedef int (*conf_byte_write)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+ uint8_t *val, uint8_t dev_value, uint8_t valid_mask);
+typedef int (*conf_dword_read)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+ uint32_t *val, uint32_t valid_mask);
+typedef int (*conf_word_read)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+ uint16_t *val, uint16_t valid_mask);
+typedef int (*conf_byte_read)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+ uint8_t *val, uint8_t valid_mask);
+typedef int (*conf_dword_restore)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry, uint32_t real_offset,
+ uint32_t dev_value, uint32_t *val);
+typedef int (*conf_word_restore)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry, uint32_t real_offset,
+ uint16_t dev_value, uint16_t *val);
+typedef int (*conf_byte_restore)
+ (XenPCIPassthroughState *, XenPTReg *cfg_entry, uint32_t real_offset,
+ uint8_t dev_value, uint8_t *val);
+
+/* power state transition */
+#define PT_FLAG_TRANSITING 0x0001
+
+
+typedef enum {
+ GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */
+ GRP_TYPE_EMU, /* emul reg group */
+} RegisterGroupType;
+
+typedef enum {
+ PT_BAR_FLAG_MEM = 0, /* Memory type BAR */
+ PT_BAR_FLAG_IO, /* I/O type BAR */
+ PT_BAR_FLAG_UPPER, /* upper 64bit BAR */
+ PT_BAR_FLAG_UNUSED, /* unused BAR */
+} PTBarFlag;
+
+
+typedef struct XenPTRegion {
+ /* Virtual phys base & size */
+ uint32_t e_physbase;
+ uint32_t e_size;
+ /* Index of region in qemu */
+ uint32_t memory_index;
+ /* BAR flag */
+ PTBarFlag bar_flag;
+ /* Translation of the emulated address */
+ union {
+ uint64_t maddr;
+ uint64_t pio_base;
+ uint64_t u;
+ } access;
+} XenPTRegion;
+
+/* XenPTRegInfo declaration
+ * - only for emulated register (either a part or whole bit).
+ * - for passthrough register that need special behavior (like interacting with
+ * other component), set emu_mask to all 0 and specify r/w func properly.
+ * - do NOT use ALL F for init_val, otherwise the tbl will not be registered.
+ */
+
+/* emulated register infomation */
+struct XenPTRegInfo {
+ uint32_t offset;
+ uint32_t size;
+ uint32_t init_val;
+ /* reg read only field mask (ON:RO/ROS, OFF:other) */
+ uint32_t ro_mask;
+ /* reg emulate field mask (ON:emu, OFF:passthrough) */
+ uint32_t emu_mask;
+ /* no write back allowed */
+ uint32_t no_wb;
+ conf_reg_init init;
+ /* read/write/restore function pointer
+ * for double_word/word/byte size */
+ union {
+ struct {
+ conf_dword_write write;
+ conf_dword_read read;
+ conf_dword_restore restore;
+ } dw;
+ struct {
+ conf_word_write write;
+ conf_word_read read;
+ conf_word_restore restore;
+ } w;
+ struct {
+ conf_byte_write write;
+ conf_byte_read read;
+ conf_byte_restore restore;
+ } b;
+ } u;
+};
+
+/* emulated register management */
+struct XenPTReg {
+ QLIST_ENTRY(XenPTReg) entries;
+ XenPTRegInfo *reg;
+ uint32_t data;
+};
+
+typedef struct XenPTRegGroupInfo XenPTRegGroupInfo;
+
+/* emul reg group size initialize method */
+typedef uint8_t (*pt_reg_size_init_fn)
+ (XenPCIPassthroughState *, const XenPTRegGroupInfo *,
+ uint32_t base_offset);
+
+/* emulated register group infomation */
+struct XenPTRegGroupInfo {
+ uint8_t grp_id;
+ RegisterGroupType grp_type;
+ uint8_t grp_size;
+ pt_reg_size_init_fn size_init;
+ XenPTRegInfo *emu_reg_tbl;
+};
+
+/* emul register group management table */
+typedef struct XenPTRegGroup {
+ QLIST_ENTRY(XenPTRegGroup) entries;
+ const XenPTRegGroupInfo *reg_grp;
+ uint32_t base_offset;
+ uint8_t size;
+ QLIST_HEAD(, XenPTReg) reg_tbl_list;
+} XenPTRegGroup;
+
+
+typedef struct XenPTPM {
+ QEMUTimer *pm_timer; /* QEMUTimer struct */
+ int no_soft_reset; /* No Soft Reset flags */
+ uint16_t flags; /* power state transition flags */
+ uint16_t pmc_field; /* Power Management Capabilities field */
+ int pm_delay; /* power state transition delay */
+ uint16_t cur_state; /* current power state */
+ uint16_t req_state; /* requested power state */
+ uint32_t pm_base; /* Power Management Capability reg base offset */
+ uint32_t aer_base; /* AER Capability reg base offset */
+} XenPTPM;
+
+struct XenPCIPassthroughState {
+ PCIDevice dev;
+
+ char *hostaddr;
+ bool is_virtfn;
+ HostPCIDevice *real_device;
+ XenPTRegion bases[PCI_NUM_REGIONS]; /* Access regions */
+ QLIST_HEAD(, XenPTRegGroup) reg_grp_tbl;
+
+ uint32_t machine_irq;
+
+ uint32_t power_mgmt;
+ XenPTPM *pm_state;
+
+ MemoryRegion bar[PCI_NUM_REGIONS - 1];
+ MemoryRegion rom;
+};
+
+void pt_config_init(XenPCIPassthroughState *s);
+void pt_config_delete(XenPCIPassthroughState *s);
+void pt_bar_mapping(XenPCIPassthroughState *s, int io_enable, int mem_enable);
+void pt_bar_mapping_one(XenPCIPassthroughState *s, int bar,
+ int io_enable, int mem_enable);
+XenPTRegGroup *pt_find_reg_grp(XenPCIPassthroughState *s, uint32_t address);
+XenPTReg *pt_find_reg(XenPTRegGroup *reg_grp, uint32_t address);
+int pt_bar_offset_to_index(uint32_t offset);
+
+static inline pcibus_t pt_get_emul_size(PTBarFlag flag, pcibus_t r_size)
+{
+ /* align resource size (memory type only) */
+ if (flag == PT_BAR_FLAG_MEM) {
+ return (r_size + XC_PAGE_SIZE - 1) & XC_PAGE_MASK;
+ } else {
+ return r_size;
+ }
+}
+
+/* INTx */
+static inline uint8_t pci_read_intx(XenPCIPassthroughState *s)
+{
+ return host_pci_get_byte(s->real_device, PCI_INTERRUPT_PIN);
+}
+uint8_t pci_intx(XenPCIPassthroughState *ptdev);
+
+#endif /* !QEMU_HW_XEN_PCI_PASSTHROUGH_H */
diff --git a/hw/xen_pci_passthrough_helpers.c b/hw/xen_pci_passthrough_helpers.c
new file mode 100644
index 0000000..192e918
--- /dev/null
+++ b/hw/xen_pci_passthrough_helpers.c
@@ -0,0 +1,46 @@
+#include "xen_pci_passthrough.h"
+
+/* The PCI Local Bus Specification, Rev. 3.0, {
+ * Section 6.2.4 Miscellaneous Registers, pp 223
+ * outlines 5 valid values for the intertupt pin (intx).
+ * 0: For devices (or device functions) that don't use an interrupt in
+ * 1: INTA#
+ * 2: INTB#
+ * 3: INTC#
+ * 4: INTD#
+ *
+ * Xen uses the following 4 values for intx
+ * 0: INTA#
+ * 1: INTB#
+ * 2: INTC#
+ * 3: INTD#
+ *
+ * Observing that these list of values are not the same, pci_read_intx()
+ * uses the following mapping from hw to xen values.
+ * This seems to reflect the current usage within Xen.
+ *
+ * PCI hardware | Xen | Notes
+ * ----------------+-----+----------------------------------------------------
+ * 0 | 0 | No interrupt
+ * 1 | 0 | INTA#
+ * 2 | 1 | INTB#
+ * 3 | 2 | INTC#
+ * 4 | 3 | INTD#
+ * any other value | 0 | This should never happen, log error message
+}
+ */
+uint8_t pci_intx(XenPCIPassthroughState *ptdev)
+{
+ uint8_t r_val = pci_read_intx(ptdev);
+
+ PT_LOG("intx=%i\n", r_val);
+ if (r_val < 1 || r_val > 4) {
+ PT_LOG("Interrupt pin read from hardware is out of range: "
+ "value=%i, acceptable range is 1 - 4\n", r_val);
+ r_val = 0;
+ } else {
+ r_val -= 1;
+ }
+
+ return r_val;
+}
--
Anthony PERARD
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |